Simulation software Product List and Ranking from 177 Manufacturers, Suppliers and Companies

THINK ROI. Bring a management perspective to the press domain.

ROI (Return on Investment) increases by using AutoForm.

"Aren't you giving up on optimizing the automobile manufacturing process any further?" In the design of automotive press-formed parts and molds, where short delivery times and low costs are always required, using simulation software can minimize rework and achieve further efficiency. 【Usage Scenarios (What You Can Do)】 - Confirm moldability - Consider yield - Compare costs of each process proposal - Check S/B trends - Verify robustness - Consider dimensional freeze - Verify robustness - Investigate the root cause when problems occur 【Features】 ◎ Reliable response to short delivery times 　- Fast calculation speed 　- Easy operation allows for quick handling ◎ User-friendly 　- Intuitive and easy operability 　- Materializes what the field is thinking and makes it usable ◎ Comprehensive support system 　- Technical support hotline established, with specialized engineers providing quick solutions ◎ World standard 　- Overwhelming share in Europe 　- Over 700 companies in 40 countries, with more than 3,000 users worldwide

Company：オートフォームジャパン
Price：Other

Other CAD related software
Other analyses
Simulation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

AutoForm-PhaseChange Plug-In

Introduction of software that considers phase transformation between quenching and thermal deformation after cooling.

The "AutoForm-PhaseChange Plug-In" is software that, when combined with the AutoForm-Thermo Plug-In, allows for realistic simulation of the hot press forming process for ultra-high-strength steel materials. In the automotive industry, the hot press forming process is crucial for meeting the requirements of improved collision safety levels and weight reduction. 【Features】 ■ Realistic simulation of hot press forming and quenching processes ■ Forming of complex-shaped parts with suppressed springback effects ■ Press-formed parts that meet target local strength characteristics ■ Improved accuracy in collision analysis 【Main Functions】 ■ Rapid simulation of direct and indirect hot press forming processes ■ Complete thermo-mechanical coupled simulation considering phase-dependent material properties ■ Phase transformation during quenching and thermal deformation after cooling ■ Support for tailored tempering processes ■ Graphic display of final part characteristics, including thickness distribution, strain-stress distribution, and distribution and ratio of different material phases, along with the resulting hardness.

Company：オートフォームジャパン
Price：Other

Press Dies
Mold Design
Stress Analysis
Simulation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Introduction to Press Forming Simulation [AutoForm Pareto Principle]

Promoting a change in industry awareness towards achieving improved accuracy in press forming simulation through the AutoForm Pareto Principle!

Introduction to the Pareto Principle introduced in press forming simulation. By understanding this principle, you can efficiently enhance the accuracy of press forming simulations. 【Contents】 1. About the Pareto Principle in forming simulation 2. Reasons to focus on setting "essential parameters" in process simulation 3. The next level of "critical parameters" for more accurate simulation considerations 4. The third group of "important parameters" handled by the AutoForm Pareto Principle model 5. Strengthening press forming simulation through the addition of robustness analysis, which is responsible for the comprehensive expansion of the accuracy index with the final level of "detailed parameters" 6. The last parameters in the accuracy indicators of simulation: tribology and contact surface pressure

Company：オートフォームジャパン
Price：Other

simulator
Software (middle, driver, security, etc.)
3D CAD
Simulation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Presenting Case Study Collection! 'AutoForm Customer Success Case Study Collection 2022'

Simulation software that contributes to the optimization of the press molding die process! We are offering a collection of success stories summarizing case studies from both domestic and international examples, along with our collaboration with AutoForm!

We are pleased to present the 2022 edition of successful AutoForm implementation case studies, both domestic and international, including examples of initiatives aimed at expanding the use of AutoForm for business process innovation, case studies on reducing man-hours for mold alignment work utilizing CAE, and collaborative project examples with overseas companies applying digital twins and robust engineering models (REM). 【Featured Cases】 ■ Application to ultra-high tensile springback prediction and unexpected cracking prediction during mass production ■ Improvement of prediction accuracy for forming inflow using high-order friction coefficients ■ Achieving overall optimization from process planning to mold manufacturing through the application of AutoForm-ProcessDesigner for CATIA and new prospective flow ■ Reducing assembly man-hours in the finishing process through modeling of "shape relief" using AutoForm ■ A press forming method that keeps the outer panel of Class A aluminum hoods within tolerance during the first mold trial (overseas case) ■ Suppressing springback without corrective adjustments to the hood outer (overseas case) *If you would like a copy of the case study collection, please feel free to contact us or view the PDF materials.

Company：オートフォームジャパン
Price：Other

simulator
Press Dies
Simulation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Digital Productivity Examination of Press Molding Dies and Assembly [Case Study]

AutoForm press and assembly solutions that deliver actual results in digitalization!

As expectations for productivity improvements through digital means grow, AutoForm is also expanding its solutions from press forming simulation to assembly production, including proposals for digital process twins and robust engineering models (REM). This document will explain the important factors in digital considerations for press parts and assembly at AutoForm, as well as provide specific operational methods. 【Contents】 ■ Definition of prediction accuracy in simulation ■ Robust engineering models (REM) and digital process twins ■ Example of Coulomb friction coefficient and TriboForm model ■ Optimization of assembly processes *For more details, please refer to the PDF document or feel free to contact us.

Company：オートフォームジャパン
Price：Other

simulator
Simulation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

3DEXPERIENCE DELMIA <Resource Verification and NC Processing>

Programs and simulations for working machinery! Contributing to the improvement of NC program accuracy.

We would like to introduce resource verification for "NC machining" using the 3D simulation tool '3DEXPERIENCE DELMIA'. It fully supports milling, turning, and mill-turn operations. It integrates turning and milling processes into a single NC program and defines the NC program in the context of a virtual NC machine. It verifies high-speed and collision-free accurate tool paths, contributing to the improvement of NC program accuracy. 【Features】 ■ Full support for milling, turning, and mill-turn operations ■ Integration of turning and milling processes into a single NC program ■ Definition of NC programs in the context of a virtual NC machine ■ Machining simulation integrated with material removal ■ Creation of cutting tools and tool assemblies using ISO 13399 standards *For more details, please refer to the PDF document or feel free to contact us.

Company：兼松エレクトロニクスデジタル・サービス本部
Price：Other

Process Control System
Other production management systems
Other operation management software
Simulation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

3DEXPERIENCE DELMIA <Resource Verification and Workability>

Access and edit variables based on 103 types of anthropometry! Supports the creation of accurate mannequin models.

We would like to introduce the verification of work environments that consider workability and safety using the 3D simulation "3DEXPERIENCE DELMIA." This enables the early identification of ergonomic issues. It supports the creation of accurate mannequin models and conducts simulations and verifications of work processes. Additionally, it allows access to and editing of variables based on 103 types of anthropometry. 【Features】 ■ Supports the creation of accurate mannequin models ■ Allows access to and editing of variables based on 103 types of anthropometry ■ Simulates and verifies work processes ■ Verifies visibility, reach, space, posture, comfort, and safety based on ergonomics *For more details, please refer to the PDF document or feel free to contact us.

Company：兼松エレクトロニクスデジタル・サービス本部
Price：Other

Process Control System
Other production management systems
Other operation management software
Simulation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Taking measurement technology to the next level.

Improvement of process and quality assurance using high-end chromatic aberration confocal sensors.

To meet the need for speeding up production processes, data from ultra-fast inline measurements is essential. Such technology requires non-contact, high precision, as well as robustness, high reliability, and high-resolution 3D imaging. Our "Chromatic Aberration Confocal Sensor" can meet these requirements. Equipped with high-performance optical lenses, our chromatic aberration confocal sensor focuses not at a single point but at multiple distances along the optical axis, allowing it to focus across all wavelengths of visible light. This multifunctional optical sensor opens up new dimensions in measurement technology. In addition, we also offer products such as the "CLS-C Line Sensor," "C Point Sensor," and "Chromatic Aberration Point Sensor." 【Features】 ■ Capable of measuring various materials: transparent/opaque, diffuse/reflective surfaces, absorbing surfaces, etc. ■ Prevention of shadowing effects through coaxial measurement ■ Wide tolerance and high NA allow for measurements at up to 45° on reflective surfaces and over 80° on diffuse surfaces ■ Ultra-fast multi-point line sensor enables parallel measurement of multiple points *For more details, please refer to the PDF document or feel free to contact us.

Company：プレシテック・ジャパン
Price：Other

Sensors
Simulation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Welding deformation and residual stress simulation software 'ASU/WELD'

A series of welding deformation and residual stress simulation software that allows for actual machine evaluation. We will introduce case studies that improve the challenges faced by welding engineers!

The "ASU/WELD" series visualizes the effects of welding thermal distortion in advance and guides the welding process, enabling reductions in prototype costs and shortened delivery times. ■ Product Introduction - "ASU/WELD-Express," a software for analyzing inherent distortion in a short time. - "ASU/WELD-Master," a thermal elastic-plastic analysis software capable of detailed evaluation of welding deformation and residual stress, among others. ■ Challenges and Issues Faced by Welding Engineers - Shortening delivery times and reducing man-hours in the welding process. - Product dimension defects due to welding deformation. - Decreased structural strength due to residual stress. This is recommended for those facing the above challenges. For detailed product information and examples of improvements to these issues, please download the catalog or contact us.

Company：先端力学シミュレーション研究所
Price：Other

Other analyses
Analysis Services
Image analysis software
Simulation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

CAE Proxy Solution that speeds up simulations by 1000 times

From creating learning models to consulting! Achieving real-time simulations.

Are you involved in CAE and facing these concerns? - Parameter studies take too much time - I want to speed up routine CAE work - The calculation speed is insufficient for real-time CAE usage The CAE proxy solution can solve these problems! The CAE proxy solution is a consulting service that uses deep learning to substitute simulations.

Company：先端力学シミュレーション研究所
Price：Other

simulator
Analysis Services
Other information systems
Simulation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Case study of gate position optimization using a super high-speed resin flow simulator.

Instantly calculate the resin filling path predicted from the product shape. Optimization of gate positions and adjustment of weld lines can be done quickly.

Real-time level predictions of time-history flow paths in resin injection molding have become possible through our unique calculation algorithm, which focuses on the effects of product shape, injection position, and injection volume ratio. In addition to initial scheme considerations, seamless collaboration with ASU/MOLD allows for rapid narrowing down of cases for detailed analysis, thereby reducing lead times.

Company：先端力学シミュレーション研究所
Price：100,000 yen-500,000 yen

simulator
Simulation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

SIMulation Workbench

We provide all the parameters and signals of the customer's simulation with high speed and direct shared memory access.

"SIMulation Workbench" provides a comprehensive framework for the development and execution of real-time hardware-in-the-loop simulation and man-in-the-loop simulation. The real-time core of this product is built around a very fast memory-resident database. Simulation models and I/O processes can directly access the RTDB with very short wait times. Additionally, it fully leverages the powerful features of real-time operating systems and is completely optimized for multi-channel applications. 【Features】 ■ Supports a wide range of industry-standard modeling tools ■ Multi-rate, multi-model, multi-core simulation ■ Complete GUI control of all runtime activities ■ Support for multi-rate and multi-core ■ Asynchronous and synchronous data collection I/O tasks ■ Real-time test scripts *For more details, please refer to the PDF documentation or feel free to contact us.

Company：コンカレント日本
Price：Other

Testing Equipment and Devices
Simulation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Simulator "SIMulation Workbench"

It is composed mainly of a very high-speed memory-resident database (RTDB)!

"SIMulation Workbench" is a simulator that provides a comprehensive framework for the development and execution of real-time Hardware-in-the-Loop Simulation (HILS) and Man-in-the-Loop Simulation (Driving Simulator). It is equipped with performance that satisfies hard real-time systems and supports industry-standard modeling environments. It can reliably execute simulations of multiple models (Co-Simulation) and also supports multi-rate and multi-core configurations. 【Features】 ■ Supports a wide range of industry-standard modeling tools ■ Environmental simulation software such as PreScan ■ Simultaneous execution of models such as Simulink, SIMPACK, ADAMS, FMU, and hand-coded models ■ Multi-rate, multi-model, and multi-core simulation ■ Complete GUI control of all runtime activities *For more details, please download the PDF or feel free to contact us.

Company：コンカレント日本
Price：Other

simulator
Simulation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hydrodynamic performance of underwater lift surfaces in high-speed navigation.

The optimal solver for hydrodynamic investigation of waterborne lift surfaces.

Using Navier-Stokes-based CFD simulations, two standard problems were studied, and the hydrodynamics of submerged lift surfaces were investigated. (1) Flow around a three-dimensional submerged lift surface with an elliptical shape and a constant camber wing cross-section. (2) Flow around a two-dimensional symmetric wing cross-section. The dependence of the resulting hydrodynamic loads on changes in velocity and angle of attack was examined under fully submerged conditions that allowed for the occurrence of cavitation. A comparison of results obtained from numerical simulations and measurements from experiments conducted in a pressurized test tank facility was presented.

Company：日本ケイデンス・デザイン・システムズ社
Price：Other

Thermo-fluid analysis
Simulation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Reduction of work time through fully automated mesh generation for fluid analysis simulation.

【Gift of Case Studies!】Complete automation from time-consuming CAD maintenance to mesh generation! Proven results that have accelerated creation time by 60 times!

Fluid analysis simulations take a lot of time from CAD modifications to mesh generation. Additionally, mesh generation requires skilled artisans to spend a significant amount of time, which poses a considerable burden on companies. Cadence's "Omnis/AutoMesh" can fully automate the mesh creation process, which previously took a long time from CAD modifications. With the ability to build a fully automated fluid analysis system through batch processing, tasks that would typically take a month can now be completed in just half a day, significantly reducing work time. 【Features】 ■ Fully automated mesh creation ■ No need for CAD cleanup ■ High-speed generation of large meshes through distributed parallel processing ■ Mesh generation primarily using hexahedra ■ Ability to modify and add shapes using CAD functions, etc. *For more details, please download the PDF or contact us.

Company：日本ケイデンス・デザイン・システムズ社
Price：Other

Thermo-fluid analysis
Simulation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

CFD solution "Millennium M1"

Accelerating system development through simulations using multiphysics, AI, and digital twins.

The HW/SW acceleration digital twin solution "Millennium M1" is a CFD solution for system design and analysis using multiphysics. It includes our high-fidelity CFD software stack, enabling a significant reduction in turnaround time even for complex mechanical systems. 【Features】 ■ Available for both cloud and on-premises use ■ Achieves ultra-fast throughput with a combination of GPU-resident CFD solvers and dedicated GPUs ■ Provides linear scalability *Please note that the materials are in English, so feel free to contact us for more details.

Company：日本ケイデンス・デザイン・システムズ社
Price：Other

Other analyses
Simulation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fidelity CharLES

High-speed LES simulation for challenging design problems

The Fidelity CharLES solver is the industry's first high-fidelity computational fluid dynamics (CFD) solver, expanding large eddy simulation (LES) to a wide range of engineering applications such as aerospace, automotive, and turbomachinery. Designed to tackle challenging computational fluid dynamics problems, this solver accurately predicts traditional complex issues in CFD related to aeroacoustics, aerodynamics, combustion, heat transfer, and multiphase flow. While high-fidelity LES simulations offer world-class accuracy and stability, they can consume thousands of CPU cores for days in a single simulation, which has traditionally limited the practical application of this technology due to cost concerns. The Fidelity CharLES software reduces the time required for LES simulations from days to hours by leveraging both CPU and GPU capabilities. The solver is optimized to consume as little memory as possible.

Company：日本ケイデンス・デザイン・システムズ社
Price：Other

Other CAD related software
Simulation software

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

ASP 601 Virtual Point Conversion

Seamlessly integrated into the TPA project (APR 620), calculating forces and moments, as well as translational and rotational accelerations in locations that cannot be physically measured.

Virtual point conversion is an optional extension feature of the ArtemiS SUITE for TPA projects. This allows for the creation of virtual measurement points on components and assemblies, enabling the calculation of force, moment, rotational and translational acceleration even in locations where sensors, hammers, or shakers cannot be used. In hybrid models, using virtual points allows for the connection of numerical simulation models with actual measurement data. The virtual point conversion includes an intuitive user interface that guides users step-by-step through the entire process, and it also provides multiple quality assurance steps, making it operable without advanced expertise.

Company：ヘッドアコースティクスジャパン
Price：Other

Other measurement, recording and measuring instruments
Structural Analysis
Simulation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ultra-compact CAN/LIN/CAN-FD interface CANary

It is a super compact interface that converts CAN/LIN and CAN-FD to USB.

CANary and CANary FD are pocket-sized CAN interfaces for ATI's VISION calibration and data collection system. Both bridge full-bandwidth CAN data between ATI's data collection hardware, ECUs, or other CAN devices compatible with VISION using multiple channels. CANary communicates with the PC using full-speed USB (12 Mbps) and features two high-speed CAN channels and two LIN channels. All channels are electrically isolated from the USB connection and have built-in bus termination that can be set or released by VISION. CANary-FD is designed to handle the increased data available on CAN FD networks while maintaining the compact size of the traditional CANary product. CANary FD communicates with the PC using high-speed USB (480 Mbps) and has four CAN FD channels. The channels feature independent galvanic isolation and physical switches for bus termination.

Company：ATI Worldwide LLC Japan Branch
Price：Other

Other network tools
Simulation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

CAN Interface Hybrid Pro 2xCAN/LIN

Universal interface compatible with CAN, CAN-FD, and LIN - an essential item for engineers involved in automotive communication!

The Kvaser Hybrid Pro 2xCAN/LIN is a highly flexible dual-channel PC interface that allows each channel to be individually assigned as CAN, CAN FD, or LIN. It serves as a "universal interface," making it an essential item for all engineers involved in automotive communication. The Kvaser Hybrid Pro 2xCAN/LIN offers advanced features such as support for CAN FD, silent mode, single-shot, error frame generation, and Kvaser MagiSync automatic clock synchronization. As a professional-level device, this interface can run user-developed programs that utilize resources provided within the free CANlib SDK offered by Kvaser. These programs can be designed to perform various advanced tasks such as CAN node simulation and CAN flashing, or to create gateways between LIN and CAN. User support guidance and code examples are provided.

Company：ATI Worldwide LLC Japan Branch
Price：Other

Other network tools
Simulation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Multi-channel CAN I/F, Pro Series USBcan Pro

Pro Series Multi-Channel CAN-USB Interface. Simultaneously captures multiple CAN buses to the PC.

The Kvaser USBcan Pro series is a compact yet advanced portable multi-channel CAN to USB real-time interface that supports 2ch, 4ch, and 5ch configurations, handling the transmission and reception of CAN and CAN FD messages on the CAN bus with high-precision timestamps. The Kvaser USBcan Pro series is compatible with applications using Kvaser's CANlib. The 2ch 2xHS v2 features two DSUB9 pin connectors, the 4ch 4xHS has an HD26 pin connector or can connect to four DSUB9 pin splitters, and the 5ch 5xCAN has an HD26 pin connector or can connect to five DSUB9 pin splitters for each CAN channel. It allows for bulk monitoring of the vehicle's CAN bus network.

Company：ATI Worldwide LLC Japan Branch
Price：Other

Communications
Other embedded systems (software and hardware)
Simulation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Kverser is an expert in CAN bus network communication.

CAN solutions loved around the world! Providing high-quality, low-cost CAN interface solutions through groundbreaking technology!

We would like to introduce the lineup of Kvaser products. Starting with the "Kvaser Leaf v3," which is affordable yet high-performance and supports CAN FD, we also have the "Kvaser Memorator Series," which can be used as a standalone CAN data logger or as a CAN USB interface. Additionally, we present the "Kvaser Hybrid Series," a versatile interface compatible with multiple networks, an essential item for all engineers involved in automotive communication. Furthermore, we will introduce products such as CAN to Ethernet converters and wireless CAN solutions.

Company：ATI Worldwide LLC Japan Branch
Price：Other

Communications
Other network tools
Simulation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Powertrain Open Integration Test Platform

Optimize RDE values, fuel consumption, and thermal management through virtual test driving.

Our company offers a comprehensive and user-friendly open integrated testing platform equipped with an integrated model of vehicles, drivers, road environments, traffic flow, and surrounding environments. Virtual testing for a single vehicle is possible from the early stages before the development of physical prototypes. We can evaluate the development and testing of HEVs, as well as the fuel efficiency, driving performance, and harmful emissions (NOx, CO2) of all current and future powertrains. 【Product Lineup】 ■CarMaker Simulation solution for testing passenger cars and light commercial vehicles ■TruckMaker Simulation solution addressing the development and testing requirements for large vehicles such as trucks, construction vehicles, buses, semi-trailers, large semi-trailers, and special vehicles ■MotorcycleMaker Testing simulation solution specifically for two-wheeled vehicles such as motorcycles, electric assist bicycles, and scooters *For more details, please refer to the PDF materials or feel free to contact us.

Company：IPG Automotive 本社、名古屋オフィス
Price：Other

Testing Equipment and Devices
Development support tools (ICE, emulators, debuggers, etc.)
Simulation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Vehicle Dynamics Open Integration Test Platform

Applied from the early stages of development! Supports the development, design, and testing of steering, chassis control systems, and suspension.

Our company provides solutions for the development of vehicle dynamics, focusing on safety and ride comfort. CarMaker, TruckMaker, and MotorcycleMaker are open and extensible platforms equipped with sophisticated interfaces that enable rapid validation and automation of testing. Nonlinear vehicle and system models, such as multi-body suspension, Pfeffer steering models, and various tire models, can also be easily implemented. Additionally, the powerful driver model "IPGDriver" features self-learning capabilities, allowing for driving that adapts to various scenarios. It accurately and reliably replicates any task performed by real test drivers. *For more details, please refer to the PDF document or feel free to contact us.*

Company：IPG Automotive 本社、名古屋オフィス
Price：Other

Testing Equipment and Devices
Development support tools (ICE, emulators, debuggers, etc.)
Simulation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Open Integrated Test Platform "CarMaker Product Suite"

For the development and testing of automobiles! Always stay one step ahead with virtual test driving.

Our company provides innovative simulation solutions for vehicle dynamics, ADAS/AD, and powertrains. "CarMaker," "TruckMaker," and "MotorcycleMaker" can realistically and accurately simulate the operational characteristics, performance characteristics, traffic situations, roads, and surrounding environments of passenger cars, commercial vehicles, and motorcycles in a virtual world. Before creating real prototypes, many scenarios can be tested at low cost in the early stages of development. 【Features】 ■ Improved efficiency across the entire development process from MIL, SIL, HIL, to VIL ■ Enhanced product maturity by using virtual prototypes at every stage of development ■ Quick analysis enabled by excellent visualization ■ Rapid creation of complex and realistic test scenarios *For more details, please refer to the PDF document or feel free to contact us.

Company：IPG Automotive 本社、名古屋オフィス
Price：Other

simulator
Testing Equipment and Devices
Development support tools (ICE, emulators, debuggers, etc.)
Simulation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

ADAS, software for autonomous driving development [case study collection available]

Implemented by major OEMs, suppliers, and service providers. Real-time fusion of sensor data through high-speed computation, linked with map information.

You can download the latest materials for the simulation software, part of the CarMaker product family ('CarMaker, TruckMaker, MotorcycleMaker'), which is used for the development and evaluation of advanced driver assistance systems and highly automated driving systems utilizing virtual test driving. This product supports all major sensor models, including cameras, ultrasonic, radar, and LiDAR. Depending on the development stage or verification purpose, we can provide three types of sensor models (ideal state, HiFi, RSI). 【Main Use Cases】 - Development and testing in a virtual environment using deep learning - Generation of reproducible scenarios for functional verification during the development stage - Testing and development of various sensor models - Importing map information and utilizing real-world measurement data - Creating road environments using external tools - Executing parallel tests for HPC clusters - Freely setting traffic density for use in RDE analysis *We will have a booth at the "Automotive Engineering Exposition: Human and Vehicle Technology Expo 2021 Yokohama" (Booth Number: 225). Please experience the simulation of autonomous driving using CarMaker and driving simulators!*

Company：IPG Automotive 本社、名古屋オフィス
Price：Other

Other analyses
simulator
others
Simulation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Engineering Services] Creation of Virtual Prototypes

Ideal for cross-domain use! Explanation of virtual prototypes.

Virtual prototypes fit parameters within vehicle models of CarMaker, TruckMaker, and MotorcycleMaker, aligning them with the properties and functions of the reference vehicles. Creating virtual prototypes based on your design data results in detailed and realistic models. By utilizing this data in the vehicle development process, it can be created at a low cost and used from the early stages of development. We provide support for obtaining the necessary data and parameterizing vehicle models using that data. 【Features】 ■ Virtual images of actual prototypes ■ Ideal for cross-domain use ■ Compatible with all vehicle classes supported by the CarMaker product family ■ Behavior that is realistic up to the limits of vehicle dynamics *For more details, please refer to the PDF materials or feel free to contact us.

Company：IPG Automotive 本社、名古屋オフィス
Price：Other

Testing Equipment and Devices
Development support tools (ICE, emulators, debuggers, etc.)
Simulation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Simulation software Product List and Ranking from 177 Manufacturers, Suppliers and Companies | IPROS GMS

Simulation software Manufacturer, Suppliers and Company Rankings

Simulation software Product ranking