Supported materialsのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 ・ BtoB における情報を集めた国内最大級の技術データベースサイトです。

Supported materials - メーカー・企業4社の製品一覧とランキング

Supported materialsの製品一覧

31～38 件を表示 ／ 全 38 件

表示件数
3D printing compatible material 'PA11 | MJF'

3D printing compatible material 'PA11 | MJF'

A nylon material suitable for mass production, commonly used for parts that take advantage of impact resistance and toughness.

This is a ductile, plant-based nylon material called HP 3D High Reusability PA 11, made with the HP Jret Fusion 4200. It is a mass-production-friendly material often used for parts that take advantage of its impact resistance and toughness, such as snap fits, living hinges, insoles, and sports equipment. It also features a high load deflection temperature, capable of withstanding up to 185°C (0.45 MPa). At 1.82 MPa, the temperature limit is 54°C. The MJF method produces isotropic parts with high strength and dimensional accuracy compared to SLS, making it suitable for use from prototypes to final products. It is built with a layer pitch of 0.08mm, allowing for detailed text representation.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
3D printing compatible material 'High Heat Resistant Acrylic | MJT | AGILISTA'

3D printing compatible material 'High Heat Resistant Acrylic | MJT | AGILISTA'

It is a high heat-resistant acrylic material called AR-H1. Output via 3D printing! Accepting contract manufacturing inquiries.

This is a high-temperature acrylic material named AR-H1, outputted from AGILISTA. It can withstand heat up to 103°C at a load deflection temperature (0.45MPa), making it suitable for assembly with heat-generating components and for functional verification through hot air or hot water. The layer pitch is 20μm, with a tolerance of approximately 0.1mm*, making it suitable for high-precision parts such as fittings. It is water-resistant and can accommodate small drilling, which allows for its use in functional prototypes of showerheads. *The intersection is a guideline and may vary depending on the shape of the model. Tests conducted in compliance with the following standards have passed: REACH RoHS

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
3D Printing Compatible Material 'High Hardness Silicone Rubber | MJT'

3D Printing Compatible Material 'High Hardness Silicone Rubber | MJT'

It is a silicone-like rubber material called AR-G1H. Output via 3D printing! Accepting commissioned modeling.

This is a silicone-like rubber material called AR-G1H, outputted from AGILISTA. It has a Shore hardness (A) of 65. Due to the use of water-soluble support material, it is capable of creating fine shapes. With a high resolution of 30μm layer pitch and the characteristics of a highly elastic material, it is also suitable for reproducing flexible thin-walled molded objects that are prone to damage and difficult to reproduce with conventional rubber-like materials. Thanks to the properties of high-hardness silicone rubber, it is often used for protective covers with bellows structures and for testing cover jigs. *Shore hardness (A) is measured by the manufacturer based on JIS K6253. Tests conducted in compliance with the following standards have passed: REACH RoHS

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
3D printing compatible material 'Clear Acrylic | MJT'

3D printing compatible material 'Clear Acrylic | MJT'

AR-M2 is a transparent acrylic material with excellent toughness and rigidity. It is output using 3D printing! We are currently accepting commissioned modeling.

The material named AR-M2, outputted by AGILISTA, is a transparent acrylic material with excellent toughness and rigidity. It has a layer pitch of 20μm and a high precision tolerance of 0.1mm*, making it suitable for fitting parts. Due to its strength, it is suitable for functional prototypes, but it tends to show yellowing and layering more prominently. It is water-resistant and can accommodate small drilling, making it useful for functional prototypes such as shower heads. *The intersection is a guideline and may vary depending on the shape of the model. Tests conducted in compliance with the following standards have passed: 　REACH 　RoHS

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
3D printing compatible material 'ASA | FDM'

3D printing compatible material 'ASA | FDM'

It is a 3D printing material that excels in three aspects: improved mechanical properties, beautiful appearance, and weather resistance, compared to ABS resin!

This is a weather-resistant material called ASA, which is produced using F900. While it has a chemical composition similar to ABS resin, it excels in three aspects: improved mechanical properties, beautiful appearance, and weather resistance compared to ABS resin. It is formed with a layer pitch of 0.254mm, but please contact us if you have a preferred layer pitch.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
3D printing compatible material 'ULTEM9085 | FDM'

3D printing compatible material 'ULTEM9085 | FDM'

It is a high-performance thermoplastic resin with flame retardant properties. It features a high strength-to-weight ratio, excellent heat resistance, and high impact resistance.

The material called ULTEM9085, produced with the F900, is a high-performance thermoplastic resin with excellent flame retardancy. It features a high strength-to-weight ratio, outstanding heat resistance, and high impact resistance. Additionally, it possesses excellent smoke density and toxicity (FST) characteristics. It has also received certification for high performance. It is manufactured with a layer pitch of 0.254mm, but please contact us if you have a preferred layer pitch. Due to its fast printing speed, it can be delivered relatively quickly compared to other materials. It is printed with a layer pitch of 0.1mm. You can choose between standard processing (with support) and support removal when placing your order. Since the NXE400 includes physical support, it is not possible to create interlocking parts.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
3D printing compatible material 'Prototype Pro Resin | SLA'

3D printing compatible material 'Prototype Pro Resin | SLA'

【Material sample available】Despite its low price, it is an excellent material with outstanding durability and water resistance, as well as superior toughness and strength, making it often used for functional prototypes!

It is an inexpensive resin material that excels in durability and water resistance. Despite its low price, it has excellent toughness and strength, making it suitable for functional prototypes and more. It can be widely used not only for prototyping and functional testing but also for parts, tools, and components. In addition to the precision and smooth surface of photopolymer resin, it achieves short delivery times by manufacturing with a layer thickness of 0.1mm. This material is also suitable for mass production. ■ We have material samples available. If you would like a sample, please contact us and let us know your request for a sample. ■

  • 3D Printer

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
3D printing compatible material 'Economy Resin | SLA'

3D printing compatible material 'Economy Resin | SLA'

【Material sample available】This is a resin material that allows for large-scale modeling at a low cost. It is ideal for producing prototypes at an affordable price!

DMM.make 3D printing service provides total support for various manufacturing processes, from mass production assistance using molds with 3D printers to the creation of prototypes. We offer a range of materials, from those boasting strength comparable to injection molding to softer materials like rubber and silicone. On this page, we introduce the selectable material for 3D printing, 'Economy Resin | SLA.' This is an inexpensive resin material suitable for large-scale modeling. It is ideal for creating prototypes at a low cost and can also be used for mass production. It is printed with a layer pitch of 0.05mm. ■ We have material samples available. If you would like a sample, please contact us and let us know your request for a sample. ■

  • 3D Printer

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.