1～15 件を表示 ／ 全 33 件
Maximum load 300kN, compatible with rebar up to D32!
The AT-30D II is a multifunctional anchor bolt tensile load testing machine equipped with internal memory functionality. It has a maximum load capacity of 300 kN. With a backlight feature, numbers are clearly visible to the naked eye even in dark environments such as tunnels and underground sites. It is also suitable for recording with a digital camera. For more details, please contact us.
Simultaneous measurement of load and displacement! Measurement range: 0 to 30kN, displacement 10mm!
Using the Techno Tester ensures reliable construction management! It can be used for a wide range of applications, including finishing materials, anchor pins, and tiles. The Techno Tester series is a compact, high-performance digital tensile testing machine designed to easily and accurately test the quality of finishing materials. 【Features】 ○ The operation procedure is interactive with a digital display, making it easy for anyone to use immediately. ○ The 'measurement display' method powered by batteries has low malfunction rates, ensuring high reliability and peace of mind. ○ Its compact and lightweight design allows for accurate measurements even in tight spaces or difficult working conditions, all by one person. ○ Measurement values can be stored, and when used with a printer, it provides additional reliability and makes reporting effortless. For more details, please contact us.
A lightweight and compact design that can adapt to various site conditions.
The "AT-10DII" is a lightweight and compact design anchor bolt tensile load testing machine that can adapt to various site conditions. It allows for testing up to 100kN with simple operation. It simultaneously measures load and displacement with a digital display. Additionally, it has been designed to be smaller and lighter for ease of use. This significantly improves the efficiency of tensile testing. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/tester/at-10d2/?parent_url=https://sanko-techno.co.jp/products/fastening/tester/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration is required (free).
Non-destructive testing machine for tensile tests from fully threaded bolts to deformed steel bars.
The "AT-30DII" is a non-destructive testing machine capable of tensile testing from fully threaded bolts to deformed steel bars. It features a large diameter center hole, a high-capacity hydraulic cylinder, and a compact integrated structure, allowing for safe and easy testing. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/tester/at-200_30d2/?parent_url=https://sanko-techno.co.jp/products/fastening/tester/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration required (free).
Certified by the Japan Architectural Finishing Society! Tensile tests for adhesion and bonding strength. Simultaneous measurement of load and displacement!
The Techno Tester "RT Series" is a testing device suitable for tensile tests of adhesion and bonding strength, capable of simultaneously measuring load and displacement. The operating procedure is digitally displayed and simple, allowing anyone to use it immediately. Additionally, it employs a "measurement display" method that minimizes malfunctions due to battery issues, ensuring high reliability and peace of mind. Its compact and lightweight design allows for accurate measurements even in narrow spaces or difficult conditions, enabling one person to operate it effectively. In addition to the conventional square fixtures for adhesion and bonding strength tests, new circular fixtures are also available. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/tester/rt/?parent_url=https://sanko-techno.co.jp/products/fastening/tester/
For solar and solar pile foundations! Portable testing machine for pile foundations, Techno Tester DT-50TCL. A single device that supports various tests for pile foundations.
It will be active in various tests of pile foundations on site. It can be transported by a light van (vehicle) (portable type).
Compatible with almost all sizes of metal expansion anchors with practical specifications!
The non-destructive simple tensile testing device, Techno Tester KT-20, is an analog-type tensile testing machine for managing construction equipment sites. It has a maximum load of 20 kN and is practical for almost all sizes of metal expansion anchors. With just a simple operation of turning the loading handle, it allows for the strength verification of various fasteners and screws installed on metal roofs and sidings. For more details, please contact us or refer to the catalog.
Ideal for tensile tests of screws and nails, as well as adhesion tests of coatings; a compact, lightweight, and battery-free tensile testing device.
It features a needle-type display that can hold the maximum value, with a load scale that allows for tensile testing, and it shows adhesion strength in N/mm² for easy verification at a glance. It is designed to be accurate and user-friendly, making it easy to understand adhesion strength at a glance.
![Tech Tester 'R-20000ND' [Rental]](https://image.mono.ipros.com/public/product/image/087/2000478960/IPROS96351368791093098071.jpeg?w=280&h=280)
Using the filler attachment, it is possible to check the tensile load of exterior tiles and other materials. The unit is displayed in "N," and it can measure a maximum load of "20000N."
■ Easy to conduct tests in narrow spaces or difficult environments due to its compact and lightweight design. ■ Equipped with convenient features such as auto power-off and maximum value hold.
![Tech Tester "AT-10D2" [Rental]](https://image.mono.ipros.com/public/product/image/611/2000485973/IPROS57432131377535706941.jpeg?w=280&h=280)
Do not break the anchor. Do not destroy the concrete. Testing under tensile load conditions according to the purpose is possible.
■ The large LCD screen has improved visibility. ■ Data storage is possible with the internal memory function. ■ The backlight function makes it easy to see in dark places like tunnels and underground. ■ Measurements can be easily taken from ceiling or wall anchors. ■ It can also accommodate neji-me anchors. ■ Using the included tools, measurements of up to 100kN can be taken.
![Tech Tester "AT-30" [Rental]](https://image.mono.ipros.com/public/product/image/431/2000486209/IPROS24326490215576717585.jpeg?w=280&h=280)
This is a testing machine that applies tensile loads to verify whether the installed anchor bolts meet the required performance standards.
It can simultaneously measure load and displacement, with a maximum load of "300kN." 【Features】 ■ Large LCD screen for easy-to-read digital display ■ One-touch unit switching (can switch between kN and tf) ■ Can simultaneously view the tensile load and displacement of anchor bolts
Maximum tensile load 10kN
Tensile load testing machine to confirm the adhesion strength of exterior wall tiles and the substrate of the rooftop waterproofing layer.
The maximum tensile load is 100 kN! Battery-operated with no AC power required!
Tensile load testing machine to confirm the adhesion strength of anchor bolts.
Tests up to "300kN" can be conducted with simple operations!
Anchor bolt tensile load verification tensile testing machine
Maximum load 100KN. Data accumulation is possible with internal memory function.
Connect the computer with the dedicated graph display software installed. Tensile tests can be conducted while checking the displacement-load curve on-site. Additionally, the graph data can be saved on the computer.
