Tech Tester "AT-10D2" [Rental]

Added to bookmarks
Bookmarks list

Bookmark has been removed
Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration

AT-10D2

last updated：Feb 06, 2020

ソーキ

Official site

Do not break the anchor. Do not destroy the concrete. Testing under tensile load conditions according to the purpose is possible.

■ The large LCD screen has improved visibility. ■ Data storage is possible with the internal memory function. ■ The backlight function makes it easy to see in dark places like tunnels and underground. ■ Measurements can be easily taken from ceiling or wall anchors. ■ It can also accommodate neji-me anchors. ■ Using the included tools, measurements of up to 100kN can be taken.

Related Link - https://i-sooki.co.jp/allproduct/ct05/51307/

Inquire About This Product

basic information

■ Maximum load: 100kN ■ Maximum displacement: 15mm ■ Target anchor: M6 (W1/4) to M24 (W1) Bolt length: FL + 120mm ■ Inclination correction range: ±5 degrees ■ Load accuracy: Non-linearity: ±2% F.S. ±1 digit ■ Displacement accuracy: Non-linearity: ±2% F.S. ±1 digit ■ Body weight: 6.1kg 【Measurement Section】 ■ Measurement range: Load: 0 to 100kN Displacement: 0 to 15mm ■ Minimum display value: Load: 0.1kN Displacement: 0.05mm ■ Protection structure: Splash-proof type (equivalent to IP54) ■ Display section: Dot matrix 128×64 dots with backlight ■ Data storage: Graph data: 99 data points, Point data: 9,999 data points ■ External output: RS-232C ■ Power supply: 4 AA batteries ■ Continuous usage time: Approximately 30 hours (when backlight is off) ■ Other: Maximum value hold, buzzer sound based on set values, auto power off 【Mechanism Section】 ■ Load method: Built-in linear slide load mechanism with screw tightening ■ Load sensor: Strain gauge type load cell rated at 100kN ■ Displacement sensor: Potentiometer type rated at 15mm ■ Center shaft: M20 fully threaded bolt

Price range

Please contact us for details

Delivery Time

Please contact us for details

Applications/Examples of results

*Please be sure to read the instruction manual before use. 1. Set a gap between the load nut and the middle tube stopper. 2. Insert the coupling into the center shaft and place the coupling-equipped center shaft into the anchor to be tested. 3. Pass the testing machine through the center shaft, insert the adjustment nut into the center shaft, and make contact with the middle tube. 4. If the anchor is not vertical or the testing surface is unstable, adjust the height by turning the legs. Once all legs are evenly grounded, tighten the lock nut firmly by hand to secure the legs. 5. Turn on the power. 6. Use the included wrench for the adjustment nut to tighten the adjustment nut and apply the initial tightening force. 7. Press the button to perform zero adjustment. 8. Use the included open-end wrench for the load nut to turn the load nut and apply the specified load.