1～14 item / All 14 items
![Tech Tester 'R-20000ND' [Rental]](https://image.mono.ipros.com/public/product/image/087/2000478960/IPROS96351368791093098071.jpeg?w=280&h=280)
Using the filler attachment, it is possible to check the tensile load of exterior tiles and other materials. The unit is displayed in "N," and it can measure a maximum load of "20000N."
■ Easy to conduct tests in narrow spaces or difficult environments due to its compact and lightweight design. ■ Equipped with convenient features such as auto power-off and maximum value hold.
![Techno Tester "RT-2000LD2" [Rental]](https://image.mono.ipros.com/public/product/image/fa1/2000478978/IPROS84492507436534392087.jpeg?w=280&h=280)
A techno tester that supports everything from research and development of exterior materials construction to management and verification of general construction. It can simultaneously measure load and displacement.
■ Easy and Reliable - The operation procedure is interactive with digital displays, so anyone can use it immediately. - With a low incidence of malfunctions and a battery-operated "measurement display" method, it is highly reliable and safe. ■ Safe and Convenient - Its compact and lightweight design allows for accurate measurements even in tight spaces or difficult conditions, enabling one person to operate it effectively. - Measurement values can be stored, and with the use of a printer, it provides additional safety and reliability, making reporting easy. ■ Data Accumulation Possible with Internal Memory Function Data can be accumulated in the measurement unit without needing to connect to a computer on-site. Graph test mode can store up to 99 entries (F01 to F99), and load/displacement load test mode can store up to 9,999 entries (P0001 to P9999). ■ Diverse Measurement Screen Displays (1) Graph Test Mode Instantly presents a simple load/displacement curve to the observers at the test site. (2) Load/Displacement Test Mode (3) Load Test Mode (4) Current Time Display ■ Backlight Function Even in dark environments such as tunnels or underground sites, the backlight function allows the numbers to be clearly visible to the naked eye. It also ensures safe recording with a digital camera.
外壁の劣化調査・施工品質の確認に、接着力・付着力の簡易型引張試験機。
■視認性の良いLED表示、暗い場所でも安心のバックライト付 ■落下事故防止に役立つU字しゃっくるフック付 ■ピークホールド機能により最大荷重値が表示されます。 ■ワンタッチで単位面積当たりの荷重値が表示されます。（N／mm2） ■電池交換のタイミングを逃さない7段階のバッテリー残量表示付き
![Tech Tester "AT-10D2" [Rental]](https://image.mono.ipros.com/public/product/image/611/2000485973/IPROS57432131377535706941.jpeg?w=280&h=280)
Do not break the anchor. Do not destroy the concrete. Testing under tensile load conditions according to the purpose is possible.
■ The large LCD screen has improved visibility. ■ Data storage is possible with the internal memory function. ■ The backlight function makes it easy to see in dark places like tunnels and underground. ■ Measurements can be easily taken from ceiling or wall anchors. ■ It can also accommodate neji-me anchors. ■ Using the included tools, measurements of up to 100kN can be taken.
![Tech Tester "AT-10" [Rental]](https://image.mono.ipros.com/public/product/image/01c/2000485985/IPROS24697036811278030238.jpeg?w=280&h=280)
Do not break the anchor. Do not destroy the concrete. Testing under tensile load conditions suitable for the purpose is possible.
■ It can be easily measured with anchors on ceilings and walls. ■ It can also accommodate anchors at the base. ■ Using the included tools, measurements of up to 100 kN (10.2 tf) can be taken. ■ The following measurements can be made: Since the load and displacement in 2 channels are always displayed, you can continuously monitor the load and displacement until the confirmation load during the test. - Load can be switched between kN and tf - Displacement is measured in mm - Maximum load can be switched to kN or tf - Displacement at maximum load is in mm
![Tech Tester "RT-1000LD" [Rental]](https://image.mono.ipros.com/public/product/image/cd5/2000486208/IPROS25625823204418514907.jpeg?w=280&h=280)
It will be a simple tensile testing device for adhesion and bonding strength.
You can measure load and displacement simultaneously. By entering the area of the attachment used, you can display the load value per unit area. 【Features】 ■ Simultaneous measurement of load and displacement with digital display ■ Compact and lightweight design allows for easy testing in narrow spaces and difficult conditions.
![Tech Tester "AT-30" [Rental]](https://image.mono.ipros.com/public/product/image/431/2000486209/IPROS24326490215576717585.jpeg?w=280&h=280)
This is a testing machine that applies tensile loads to verify whether the installed anchor bolts meet the required performance standards.
It can simultaneously measure load and displacement, with a maximum load of "300kN." 【Features】 ■ Large LCD screen for easy-to-read digital display ■ One-touch unit switching (can switch between kN and tf) ■ Can simultaneously view the tensile load and displacement of anchor bolts
![Techno Tester "RT-2000LD" [Rental]](https://image.mono.ipros.com/public/product/image/5d8/2000486212/IPROS28822718366943195450.jpeg?w=280&h=280)
You can check the tensile load of exterior tiles and other materials using the filler attachment.
The load unit can be easily switched between "kgt" and "kN" with one button, and it can measure up to a maximum load of "20.00kN (2040kgf)." 【Features】 ■ Safe and Convenient Its compact and lightweight design allows for reliable measurements even in narrow spaces or difficult working conditions by a single person. ■ Unit switching can be done with one button. ■ Auto Power Off Function This feature automatically turns off the display approximately 20 minutes after button operation to prevent battery drain. If the display turns off due to auto power off, you can restore it by turning the power switch to "off" and then back to "on." (When resuming from auto power off, the maximum value will be cleared.)
![Tech Tester 'R-10000ND' [Rental]](https://image.mono.ipros.com/public/product/image/d51/2000479025/IPROS52002744197234246165.jpeg?w=280&h=280)
Using the filler attachment, it is possible to check the tensile load of exterior tiles and other materials.
■ Easy to conduct tests in narrow spaces or difficult environments due to its compact and lightweight design. ■ Equipped with convenient features such as auto power off and maximum value hold.
![Tech Tester "KT-20" [Rental]](https://image.mono.ipros.com/public/product/image/d50/2000479164/IPROS02993524382131474897.jpeg?w=280&h=280)
A testing device for managing building equipment sites that eliminates difficult operations and pursues ease of use and simple functionality.
■ By making the display section analog, the weight of the main unit is reduced. ■ Due to its lightweight design, testing on ceilings and other structures is possible.
外壁の劣化調査・施工品質の確認に、接着力・付着力の簡易型引張試験機。
■視認性の良いLED表示、暗い場所でも安心のバックライト付 ■落下事故防止に役立つU字しゃっくるフック付 ■ピークホールド機能により最大荷重値が表示されます。 ■ワンタッチで単位面積当たりの荷重値が表示されます。（N／mm2） ■電池交換のタイミングを逃さない7段階のバッテリー残量表示付き
![Tech Tester 'KT-6' [Rental]](https://image.mono.ipros.com/public/product/image/a46/2000486092/IPROS01781385703139980938.jpeg?w=280&h=280)
This is a testing device for managing construction equipment sites that eliminates difficult operations and pursues ease of use and simple functionality.
With simple operation and an analog (needle) display, it can be used when you want to see the measurement results. 【Features】 ■ Can be loaded with a wrench or similar tool (loading nut: width 21mm) Testing is possible even in hard-to-reach areas where the handle is difficult to turn. ■ Extremely lightweight with a body weight of 1.7kg ■ A simple analog type that allows you to check fine values (minimum display) ■ Equipped with a maximum value hold function using a pointer
![Tech Tester "AT-200" [Rental]](https://image.mono.ipros.com/public/product/image/99b/2000486210/IPROS76727005437817613957.jpeg?w=280&h=280)
This is a testing machine that applies tensile loads to verify whether the installed anchor bolts meet the required performance standards.
It can simultaneously measure load and displacement. Additionally, it is equipped with an internal memory function for data storage. 【Features】 ■ Focused on usability. Easy to handle, lightweight, and compact - The use of an aluminum cylinder reduces the main unit's weight to 11kg. - Easy connection with hydraulic hoses (3m) featuring one-touch couplers at both ends. ■ Accurate and reliable measurements - Internal memory function Data can be stored at the measurement site without connecting to a computer. Graph test mode: 99 entries (F01 to F99), load and displacement test mode: 9,999 entries (P0001 to P9999). - Equipped with various measurement modes. - Improved visibility in dark environments due to the backlight function. Even in dark sites like tunnels or underground, the backlight function allows clear visibility of numbers to the naked eye. Recording with a digital camera is also worry-free. ■ Practical performance - Capable of measuring loads up to 200kN.
![Tech Tester "AT-30D2" [Rental]](https://image.mono.ipros.com/public/product/image/754/2000486211/IPROS83416882071812836106.jpeg?w=280&h=280)
This is a testing machine that applies tensile loads to verify whether the installed anchor bolts meet the required performance.
It can simultaneously measure load and displacement. Additionally, it is equipped with an internal memory function for data storage. 【Features】 ■ Data storage is possible with the internal memory function - Data can be stored at the measurement site without connecting to a computer. - Graph test mode can store up to 99 entries (F01 to F99), and load/displacement/load test mode can store up to 9,999 entries (P0001 to P9999). ■ Various measurement screen displays 1- Graph test mode Allows for immediate presentation of a simple load/displacement curve to the on-site observers. 2- Load/displacement test mode 3- Load test mode 4- Current time display ■ Backlight function In dark environments such as inside tunnels or underground, the backlight function makes the numbers clearly visible to the naked eye. It is also safe for recording with a digital camera. ■ Simultaneously view the tensile load and displacement of anchor bolts. ■ Data management is possible with a PC.
