Tesla Meter Product List and Ranking from 29 Manufacturers, Suppliers and Companies

X-axis sweeper "EFX-10"

Output is the X-axis drive signal for X-Y recorders, oscilloscopes, etc.! Measurement is possible even in magnetic fields with poor uniformity.

The "EFX-10" is an X-axis sweeper suitable for experiments involving physical phenomena that depend on magnetic field strength. Using a Hall element, it generates a direct current voltage proportional to the magnetic field strength. By fixing the sensor in the magnetic field generation space, such as with an electromagnet, and operating the panel, outputs suitable for the experimental purpose can be obtained. Please feel free to contact us when you need assistance. 【Features】 ■ Reproducibility ■ Stability ■ Linearity ■ Measurement value calibration ■ Measurement value display ■ Measurement of leakage magnetic fields *For more details, please download the PDF or feel free to contact us.

Company：エコー電子
Price：Other

Other measurement, recording and measuring instruments
Tesla Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

NMR Magnetic Field Measurement Device (Tesla Meter) 'ETM-1000F'

Automatic band setting and automatic search with the installation of Hall elements! Measurement can be performed simply by inserting the probe.

The "ETM-1000F" is an NMR magnetic field measuring device (teslameter, gaussmeter) that employs a frequency modulation method without magnetic field modulation. It can measure magnetic fields ranging from 0.1 to 1.8T with a single probe. It is a product that does not disturb the measurement magnetic field environment. Additionally, it is equipped with a liquid crystal monitor that allows monitoring of NMR resonance signals. 【Features】 ■ High precision: Measurement accuracy ±10 microtesla ■ Automatic measurement: Automatic band switching, automatic tracking function ■ Direct reading of magnetic field strength: 7-digit, high-brightness LED display ■ Measurement range: 0.1 to 1.8 tesla ■ Direct viewing of resonance signals: Built-in liquid crystal oscilloscope *For more details, please download the PDF or feel free to contact us.

Company：エコー電子
Price：Other

Other measurement, recording and measuring instruments
Tesla Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

NMR magnetic field measurement device (teslameter) 'ETM-1600F'

FM modulation method! High-precision measurements can be conducted without disturbing the measurement magnetic field environment.

The "ETM-1600F" is an NMR magnetic field measuring device (teslameter/gauges) that employs a frequency modulation method without magnetic field modulation. By adopting a slight modulation method, it has improved accuracy. It provides magnetic field modulation equivalent to the half-width of the NMR signal. Additionally, measurement values can be output as a 7-digit BCD, allowing them to be read into a computer using an external GP-IB measurement unit or USB measurement unit. 【Features】 ■ High precision: Measurement accuracy ±0.1μTesla ■ Automatic measurement: Automatic search function and automatic tracking function ■ Direct reading of magnetic field strength: 7 digits, high-brightness LED display ■ Measurement range: ±0.02T within 0.1 to 0.5 Tesla *For more details, please download the PDF or feel free to contact us.

Company：エコー電子
Price：Other

Other measurement, recording and measuring instruments
Tesla Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

NMR experimental device "E-25"

By adding peripheral devices, even broader experiments are possible! Adoption of high-frequency phase detection method.

The "E-25" is an NMR experimental device that observes signals using the CW-NMR method. It features an easy-to-handle bridge system and has a built-in phase detection circuit, allowing for signal detection through magnetic field sweeping. The included electromagnet and power supply can generate a highly stable and uniform magnetic field. Additionally, it can be arranged in a compact layout on a tabletop for experiments. 【Features】 ■ Observation of resonance signals using the CW-NMR method ■ Detection method using high-frequency bridge method ■ Adoption of high-frequency phase detection method ■ Comes with a highly stable dedicated magnetic field generator ■ Many experimental items available *For more details, please download the PDF or feel free to contact us.

Company：エコー電子
Price：Other

Other laboratory equipment and containers
Tesla Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ultrasonic Experiment Device "EOJ-60A Type"

A combination of 2 transmitters and 1 receiver! Many experiments are possible, including interference, diffraction, sound speed, and distance measurement.

The "EOJ-60A model" is an ultrasonic experimental device designed to acquire the properties of ultrasound. It is intended for physics students to learn the fundamental properties of ultrasound and propagation characteristics through experiments, and it has been designed to facilitate learning in applied areas such as distance measurement. The operation is easy. Waveforms can be observed with an external oscilloscope, and values for frequency, time, and distance can be read on the built-in display. 【Features】 ■ Learning in both fundamental and applied aspects ■ Easy operation for conducting experiments ■ A variety of experiments can be performed *For more details, please download the PDF or feel free to contact us.

Company：エコー電子
Price：Other

Other laboratory equipment and containers
Tesla Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pulse NMR experimental device 'EP-350'

Measure the resonance frequency with a built-in counter! Readings can be taken at a minimum digit of 1 kHz.

The "EP-350" is a fundamental observation device for nuclear magnetic resonance phenomena. A Hall sensor is mounted on the wall of the pole piece, displaying a minimum digit of 0.1 mT. It adopts a single-coil detection method, allowing for highly sensitive observations. The included electromagnet and power supply can generate a highly stable and uniform magnetic field. Additionally, it can be arranged on a tabletop, allowing for experiments in a compact layout. 【Features】 ■ For basic NMR experiments ■ Signal observation can be performed with simple operation ■ FID and echo observations are possible ■ Resonance frequency can be measured ■ Static magnetic field strength can be read directly ■ Comes with a highly stable dedicated magnetic field generation device *For more details, please download the PDF or feel free to contact us.

Company：エコー電子
Price：Other

Other laboratory equipment and containers
Tesla Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

MRI experimental device "EP-400"

Basic MRI experiments can be conducted, and FID from two types of nuclei can be observed! It is widely adopted for university research institutions!

The "EP-400" is an experimental device that allows basic experiments in MRI using the pulse NMR observation method. The liquid crystal display shows P1 pulse, P2 pulse, P1-P2 width, repetition time, etc., making it easier to reproduce the same conditions. Two types of FID signals, from hydrogen and fluorine, can be observed. Additionally, the front panel is equipped with a liquid crystal oscilloscope, allowing for simple FID signal observation without external devices. 【Features】 ■ Observes FID signals using the pulse NMR method ■ Easy to handle, just adjust the magnetic field ■ Displays each pulse width and repetition time numerically ■ Equipped with a liquid crystal oscilloscope for observation without external connection devices ■ Probe size compatible with standard-sized test tubes *For more details, please download the PDF or feel free to contact us.

Company：エコー電子
Price：Other

Other laboratory equipment and containers
Tesla Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

MRI experimental device "EP-450"

The magnetic field strength can be adjusted from the main unit! The included magnet uses an air cooling method that does not require water cooling.

The "EP-450" is an experimental device that uses the basic principle of MRI, pulse NMR, to observe signals. Both the envelope detection signal and the FID raw signal can be observed. The NMR frequency is fixed at 10 MHz, and only the magnetic field strength needs to be adjusted. Even though the electromagnet power supply and the electromagnet are integrated, it is compact and lightweight, weighing approximately 25 kg. The main unit can also be operated in combination with other magnets. 【Features】 ■ NMR pulse frequency: 10 MHz ■ Pulse settings: Pulse widths for P1 and P2, width of P1-P2 (when P2 is ON), repetition time ■ Variable range for P2 pulse phase: +270 to -270° (in 90° increments) ■ Observed signals: FID envelope detection waveform and FID raw signal ■ Test tube diameter that can be inserted into the probe: 12 mm ■ Detection method: Single coil method *For more details, please download the PDF or feel free to contact us.

Company：エコー電子
Price：Other

Other laboratory equipment and containers
Tesla Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

FID Voltage Monitor "ESD-04 Type"

Quantitatively measure signal levels! Display measurement timing.

The "ESD-04 type" is an FID voltage monitor for pulse NMR experimental equipment. It reads the FID signal and measures the voltage at any desired timing, allowing for quantitative measurement of differences due to sample materials. It is easy to operate, simply connecting to the EP-350 and E-35 type pulse NMR experimental equipment, and measurements are updated when a trigger is input (with a built-in hold function). 【Features】 ■ Measurement timing delay time setting: 200μS to 2mS (variable from 2mS to 20mS in increments of 10) ■ Hold function: possible with the hold switch ■ Input pulse monitor: can be monitored with an LED lamp upon input ■ Timing pulse monitor: can be monitored with an LED lamp upon input *For more details, please download the PDF or feel free to contact us.

Company：エコー電子
Price：Other

Other laboratory equipment and containers
Tesla Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Small Magnetic Field Generation Device "EM-400BP/EMS-10015BP Model"

Wide magnetic field uniformity is ensured, making it suitable for various NMR experiments and Hall element calibration!

The "EM-400BP/EMS-10015BP model" is a compact magnetic field generation device that can oscillate the generated magnetic field in a sine wave at up to 0.5Hz. The maximum magnetic field can be generated linearly up to ±0.4T. It is equipped with a built-in Hall effect sensor for magnetic field measurement. Additionally, the weight of the electromagnet is approximately 30kg, making it compact and lightweight. It can be transported to the field for Hall effect sensor calibration and other tasks. 【Features】 ■ Wide magnetic field strength: up to 0.4T (EM-400BP model) ■ Pole piece gap: 16mm ■ Pole piece diameter: 70mm ■ Wide high uniformity range: 30μT in the X, Y, Z range of 5mm at the center ■ Current value setting: 10-turn multi-dial FINE volume ■ Hall magnetic field measurement display: minimum digit 1mT, independent display of upper and lower limits or normal magnetic field strength display possible *For more details, please download the PDF or feel free to contact us.

Company：エコー電子
Price：Other

electromagnet
Tesla Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Small Electromagnet "EM-21040C Type"

Wide magnetic field uniformity that can be used for various NMR experiments, Hall element calibration, etc.!

The "EM-21040C model" is a small electromagnet equipped with a handle for easy transportation. Despite its compact and lightweight design, it generates a maximum magnetic field of 0.4T. It has sufficient thermal capacity, so water cooling is not required. Please feel free to contact us when you need assistance. 【Features】 ■ Wide magnetic field strength: up to 0.4T ■ Pole piece gap: 21mm ■ Pole piece diameter: 50φ (tapered to 42φ at the tip) *For more details, please download the PDF or feel free to contact us.

Company：エコー電子
Price：Other

electromagnet
Tesla Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Experimental Small Electromagnet "EM-46040 Type"

Even though it is compact and lightweight, it generates a maximum magnetic field of 0.4T! It maintains a highly stable magnetic field with a water cooling system.

The "EM-46040 model" is a small, lightweight experimental electromagnet with a bitter shape, boasting high magnetic field uniformity. It ensures a wide magnetic field uniformity suitable for various NMR experiments and calibration of Hall elements. Additionally, we also offer the "EMS-08064S model," a power supply designed for the "EM-40050 model" electromagnet. 【Features】 ■ Wide generated magnetic field strength: up to 0.4T ■ Maximum excitation current: 5A ■ Pole piece gap: 46mm ■ Uniformity: 0.1mT/cc ■ Pole piece diameter: 100φ *For more details, please download the PDF or feel free to contact us.

Company：エコー電子
Price：Other

electromagnet
Tesla Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Experimental small magnet 'EM-112150P'

By varying the pole piece gap, any magnetic field strength can be set!

The "EM-112150P" is a small experimental magnet with a built-in permanent magnet, allowing it to generate a magnetic field without a power supply. At a pole piece gap of 11mm, it generates a magnetic field of approximately 0.5 tesla or more. It also ensures uniformity of the magnetic field, allowing for NMR signal acquisition. It can be used for various experiments, calibration of Hall elements, and a wide range of applications. Since there is no power supply for the electromagnet, it does not generate heat. 【Features】 ■ Built-in permanent magnet ■ Maximum magnetic field of approximately 0.5 tesla ■ Wide range of magnetic field uniformity ■ Compact and portable ■ No need for water cooling or similar ■ Adjustable pole piece gap to set the required magnetic field strength *For more details, please download the PDF or feel free to contact us.

Company：エコー電子
Price：Other

electromagnet
Tesla Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

ENP-015A-

Pulse waves determine the average current with the repetition frequency and the peak charging and discharging current, allowing for a flow of up to 100mA.

The "ENP-015A" is a multi-channel series of pulse-compatible amplified piezo drivers that allows selection of 1 to 5 channels. It amplifies the input waveform to high voltage to drive piezo elements. Each channel can output a direct current of 0 to +150V, with a maximum current of 0.1A. Additionally, it features a built-in high-speed overcurrent protection circuit that responds to pulse currents, and the overcurrent protection circuit also operates for average currents. It cuts off the output and lights up a lamp to indicate operation. 【Features】 ■ Amplifies the input waveform to high voltage to drive piezo elements ■ Designed with a high peak current to accommodate pulse driving of large capacity loads ■ Low noise ■ Amplification factor ■ High-speed overcurrent protection circuit, test report *For more details, please download the PDF or feel free to contact us.

Company：エコー電子
Price：Other

power supply
Tesla Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pulse-compatible high-speed switch type piezoelectric power supply 'ENP-015S'

Drive piezoelectric elements at high speed with a 2-input pulse wave. Capable of large amplitude drive from 0 to 150V.

The 『ENP-015S』 is a switch-type power supply for driving piezoelectric elements, which charges to a set voltage at the + edge of a TTL level input waveform and retains the high voltage stored in the piezo element even after the charging pulse disappears, allowing for fast discharge to 0V when a discharge pulse is applied. With a two-stage switch and a semi-fixed variable resistor, it allows for voltage settings from 30 to 150V, enabling drive with a steep rise and fall and large amplitude. An overcurrent protection circuit activates in response to the average current, cutting off the output and illuminating a lamp to indicate operation. 【Features】 ■ Drives piezoelectric elements quickly with a two-input pulse waveform ■ Supplies drive voltage corresponding to pulse width with a one-input pulse waveform ■ Capable of large amplitude drive from 0 to 150V ■ The average current is determined by the repetition frequency of the pulse waveform and the peak current during charging and discharging, allowing for an average current of up to 100mA *For more details, please download the PDF or feel free to contact us.

Company：エコー電子
Price：Other

power supply
Tesla Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Built-in signal source high-speed switch piezoelectric power supply 'ENP-015SE'

Remote operation and configuration via Ethernet is possible. Drive voltage corresponding to pulse width is supplied.

The 『ENP-015SE』 is a switch-type power supply for driving piezoelectric elements that charges to the set voltage using the rising edge of a pulse waveform generated internally. It retains the high voltage stored in the piezo element even after the charging pulse disappears and discharges it rapidly to 0V using the falling edge of the pulse waveform. With a two-stage toggle switch and a semi-fixed variable resistor, it allows for voltage settings from 30 to 150V, enabling drive with steep rise and fall times and large amplitudes. The average current is determined by the repetition frequency of the pulse wave and the peak current during charging and discharging, allowing for an average current of up to 100mA. 【Features】 ■ Generates pulse waveforms internally to drive piezo elements ■ Remote operation and settings via Ethernet ■ Supplies drive voltage corresponding to pulse width ■ Capable of large amplitude drive from 0 to 150V ■ Built-in overcurrent protection circuit *For more details, please download the PDF or feel free to contact us.

Company：エコー電子
Price：Other

power supply
Tesla Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Power supply monitor unit for driving electric distortion elements 'ENP-50U'

It has a switching function for 4 channels or 8 channels! Remote display is possible.

The "ENP-50U" is a monitoring unit for output voltage that supports multi-channel configuration for the unit-type power supply "ENP-150U/151U." It allows for the selection of output voltage for each channel, which is displayed on a digital panel meter. Additionally, while displaying the voltage with the DPM, it is possible to observe the output voltage waveform from the monitor connector. It has the same size as the "ENP-150U" and can also be stored in a sub-rack. 【Features】 ■ Output voltage displayed on DPM ■ Waveform observation via monitor terminal ■ Case size unified with the power supply ■ Switchable display for up to 8 channels ■ Remote display capability *For more details, please download the PDF or feel free to contact us.

Company：エコー電子
Price：Other

power supply
Tesla Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Piezo Driver "ENP-4015B"

Ideal for stacked low-voltage piezoelectric actuators! Can also be used as an AC power amplifier.

The "ENP-4015B" is a piezo driver capable of driving large amplitudes from -200V to +200V with a maximum gain of 20 times. The gain can be set arbitrarily up to 20 times using a semi-fixed adjustment. By utilizing it as an experimental power supply that can be controlled by external voltage, it becomes a voltage source that can add and synthesize modulation voltages and sweep voltages. 【Features】 ■ Wide bandwidth ■ High stability ■ Low noise ■ Gain ■ High-speed overcurrent protection circuit ■ Output voltage limitation circuit *For more details, please download the PDF or feel free to contact us.

Company：エコー電子
Price：Other

power supply
Tesla Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Leave the high-precision magnetic field measurement and magnetic field sources to us!

We accept custom orders for the development of magnetic field generation devices and magnetic field measurement devices, centered around applied electromagnetic technology!

Our company offers small electromagnets and magnetic field coils that can be integrated into various testing devices through custom design. We determine the magnetic saturation of the iron core through magnetic field simulation and measurement, allowing us to select suitable materials and design the magnetic circuit. Please feel free to contact us if you have any requests. 【Features】 ■ Optimal circuit design for applications and installation environments ■ Control software allows programming of magnetic field sweep patterns from a PC ■ Communication integration with various testing equipment *For more details, please download the PDF or feel free to contact us.

Company：パワーテック
Price：Other

electromagnet
Tesla Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Magnetic Field Measurement Tesla Meter DTM Series

High-precision, high-resolution, and inexpensive Hall effect magnetic field sensor.

The Group3 Tesla meter is an exceptionally high-performance Hall effect magnetic field measurement device that is unparalleled in this price range. Group3 has solved the unique problems associated with Hall effect devices through its proprietary and unique linearity correction and temperature correction technologies. Before shipping, each probe is individually tested for hundreds of magnetic field strength values and characteristic data at different temperatures. The measurement data is analyzed on a calibration PC, and the calibration coefficients are recorded directly onto the probes before shipping. The advanced software algorithms integrated into the Group3 Tesla meter allow for the measurement of calibrated magnetic field strength based on this data. Additionally, the small sensing area of the Hall probe is ideal for field mapping, facilitating "on-the-fly" measurements in non-uniform magnetic fields (measurements while moving the probe) and AC magnetic field measurements. Such magnetic field measurements cannot be performed effectively with NMR magnetic field measurements. The high-precision Group3 Tesla meter, which approaches the accuracy of NMR magnetic field measurements, can perform these challenging magnetic field measurements at a significantly lower cost than NMR magnetic field measurements.

Company：伯東本社
Price：Other

Magnetic field analysis/electromagnetic wave analysis
Other electronic measuring instruments
Tesla Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Bartington] 3-axis magnetic field sensor 'Mag-03'

Various enclosures, power supplies, and data collection units are available! They are applied in a wide range of fields such as physics, bioelectromagnetics, geophysical exploration, and defense.

The "Mag-03" is a three-axis magnetic field sensor that is powered by any ±12V power supply and outputs three analog voltages in the form of 0 to ±10V, proportional to Bx, By, and Bz. These compact and high-performance flux gate sensors, equipped with integrated electronics, provide high-precision measurements of three-axis static and alternating magnetic fields. They are also applied in a wide range of fields, including physics, bioelectromagnetics, geophysical exploration, and defense. 【Features】 ■ Cylindrical, rectangular, unwrapped, two-part construction ■ Measurement range from ±70μT to ±1000μT ■ Bandwidth up to 3kHz *For more details, please download the PDF or feel free to contact us.

Company：国際電子工業八王子工場
Price：Other

Sensors
Tesla Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Piezo Driver M-26109B (Bipolar Type)

Bipolar type, ideal for high-capacity loads and high-speed drive.

Open loop control Number of channels: 1 ch Output voltage: ±150V

Company：メステック
Price：Other

Other process controls
power supply
controller
Tesla Meter

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance 3-axis Tesla meter "3MH3"

Equipped with a fully integrated 3-axis magnetic sensor capable of detecting magnetic flux density in three directions at a single spot. It enables high-precision 3-axis magnetic measurement and magnetic sensing.

The high-performance 3-axis Tesla meter 3MH3 achieves high-precision 3-axis magnetic measurement and 3-axis magnetic sensing through fully integrated 3-axis magnetic sensors. It allows for easy 3-axis measurement simply by connecting to a power source. Equipped with a 3-axis sensor capable of detecting magnetic flux density in three directions at a single spot, it can simultaneously record the orthogonal XYZ magnetic flux densities. With this Tesla meter/Gauss meter equipped with the sensor, it has become possible to accurately measure three-dimensional vectors in various situations that were previously impossible, such as the proximity magnetic field of permanent magnets, the generated magnetic field of small coils, and temporal changes. In addition to the magnetic sensors, the axis magnetic probe integrates bias circuits and amplifiers to improve frequency characteristics and noise resistance, as well as temperature sensors for sensitivity correction due to temperature changes. It can be used for various applications such as quality control of permanent magnets, evaluation of magnets for motors and sensors, monitoring of coils and electromagnets, development of magnetic response products, measurement of magnetic vector distribution, mass production inspection, and measurement of leakage magnetic flux. In addition to a digital display, it comes standard with 3-channel analog output and RS232C (USB) communication functions.

Company：アイエムエス
Price：Other

Analytical Equipment and Devices
Other measurement, recording and measuring instruments
Optical Measuring Instruments
Tesla Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

☆Compliant with JIS C 1910(2004) standard☆Tesla meter

Compact, lightweight, high precision, omnidirectional magnetic field measurement, high resolution, visibility of indicated values, hold function, immunity, auto range function.

The Tesla meter "TMM-2" is a portable measuring device that can measure the magnetic flux density of magnetic fields generated by power equipment and other sources. It is a "high-reliability" measuring instrument that complies with JIS C 1910 (2004) standards in terms of accuracy, operating temperature and humidity conditions, visibility of indicated values, immunity, weight, and other criteria. Magnetic field measurements from power equipment are required to be conducted using JIS-compliant measuring instruments as stipulated by the "Ministerial Ordinance Establishing Technical Standards for Electrical Equipment." This measuring instrument complies with JIS standards and is suitable for magnetic field measurements in accordance with legal regulations. Having started selling magnetic field measuring instruments over 30 years ago, it has been used by various customers, including power companies, research institutes, universities, and electrical construction companies. 【Features】 ■ Complies with JIS C 1910 (2004) ■ High performance with an accuracy of ±2% ■ Simultaneous display of magnetic field measurement values for each axis (X, Y, Z) and the composite value ■ Convenient hold function for reading measurement values ■ In-house calibration testing based on JIS standards is possible *Free demo units are currently available for loan! Inquiries can also be made through the company website (no registration required).

Company：電力テクノシステムズ
Price：Other

Electrical Instruments/Electrometers
Tesla Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pulse Scan Controller "ENP-4015BH"

It can be used as a power supply for driving electric distortion elements and as an AC power amplifier.

The "ENP-4015BH" is a pulse scan controller capable of driving large amplitudes from -200V to +200V with a maximum amplification of 20 times. With a 2KΩ resistive load, it has a bandwidth of DC to 100KHz (-3dB) at 100Vp-p output. At +100V output, it achieves low noise of 10mVp-p or less with a 2KΩ resistive load, and 5mVp-p or less with a capacitive load of 0.2μF. The amplification can be set arbitrarily up to 20 times using a semi-fixed adjustment. 【Features】 ■ Wide bandwidth ■ High stability ■ Low noise ■ Adjustable amplification ■ High-speed overcurrent protection circuit ■ Output voltage limiting circuit *For more details, please download the PDF or feel free to contact us.

Company：エコー電子
Price：Other

power supply
Tesla Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tesla Meter Product List and Ranking from 29 Manufacturers, Suppliers and Companies | IPROS GMS

Tesla Meter Manufacturer, Suppliers and Company Rankings

Tesla Meter Product ranking