Turning tools Product List and Ranking from 22 Manufacturers, Suppliers and Companies

Turning tool "CoroTurn(R) Prime"

Revolutionary all-round turning process that dramatically improves productivity and extends tool life.

"CoroTurn(R)Prime" is a new tool that enables high feed rates and extends tool life. It allows for machining of outer diameters, end faces, and grooves, facilitating not only conventional turning operations but also significantly high feed machining with PrimeTurning(TM). 【Features】 ■ Achieves over 1.5 times higher productivity through high feed rates of up to 1.2mm/rev and extends tool life by more than 2 times on average. ■ In addition to conventional turning operations, it enables low cutting angle PrimeTurning(TM). ■ Prevents chip jamming through pull machining. *For more details, please download the PDF or contact us.

Company：サンドビックコロマントカンパニー
Price：Other

Other cutting tools
Turning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Denitzool Co. "Comprehensive Catalog of Precision Cutting Tools"

Denitzool Corporation Precision Cutting Tools Comprehensive Catalog. Internal and external diameter turning and milling.

For internal and external diameter turning and milling, Denitool (Switzerland) "Comprehensive Catalog of Precision Cutting Tools." HSS-PVD coated, boring/grooving/threading tool "Microturn A/S," from Φ4.8mm (minimum processing diameter) and up, boring tool "Microturn D," boring tool/external diameter turning tool "Mini Tool," vibration-resistant carbide boring bar for high hardness 62HRC, boring tool/external diameter turning tool "Small Bar 75°," and many others are included. For more details, please contact us or refer to the catalog.

Company：ノア
Price：Other

Milling
End Mills
cutter
Turning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

AppTech Co. CUT-line Comprehensive Catalog

High performance, high precision, and high rigidity with the V-clamp system.

Noah Corporation has been dedicated to handling cutting tools as a technical trading company since its establishment in 1979, and we are pleased to celebrate our 34th anniversary. This achievement is entirely due to the support and guidance of our valued customers, for which we are deeply grateful. We accurately capture a wide range of customer needs such as quality improvement, increased work efficiency, cost reduction, and alleviation of work-related stress. We would like to introduce 36 tool manufacturers that represent the 21st century and have received high acclaim in the global market. We offer ultra-precision cutting tools that have been well-received for their ability to "reach the itch" and "be considerate" for the processing of small parts, as well as cutting tools that cater to diverse small-lot processing, complex shape processing, and difficult-to-cut materials. Additionally, we provide a new type of cutting oil that meets the high-tech demands of product materials. 【Features】 - Two-corner specification for parting, grooving, and turning operations - High performance, high precision, and high rigidity achieved through a V-clamp system For more details, please contact us or download our catalog.

Company：ノア
Price：Other

Other work tools
Turning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Both CVD and PVD are being renewed. With coating technology, we aim to extend the lifespan of cutting tools.

Achieving unprecedented longevity. Revamping both turning tools and milling tools!

Tools that everyone can use for a long time. That wish has taken shape. On our special website, we introduce the longevity of turning and milling. We have developed a new CVD coating through our unique cutting-edge technology, bringing further evolution to the longevity of turning processes. Additionally, our representative PVD coating, MEGACOAT, has continued research and development without being satisfied with the current state to achieve even greater longevity. 【New Products】 ■ New CVD Coating for Steel Machining CA115P/CA125P Both the coating and the carbide substrate have been renewed, achieving a high level of wear resistance and chipping resistance. ■ Next-Generation PVD Coating for Milling PR18 Series The newly developed PVD coating MEGACOT NANO EX realizes longer tool life in milling processes. *For more details, please visit our website through the related links.

Company：京セラ機械工具事業本部
Price：Other

Other cutting tools
Turning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-pressure coolant turning tool "CoroTurn HP" Sandvik

High versatility that does not depend on the type of machinery! A new solution for improving productivity.

The "CoroTurn HP (High Pressure)" is a turning tool for high-pressure coolant that improves cutting speed by 30% due to the cooling effect at the chip cutting edge. With precise positioning of the high-pressure coolant, it finely divides chips. In workpieces that tend to produce long chips, such as low carbon steel and stainless steel, it prevents chip entanglement issues and contributes to automation and unmanned processing. 【Features】 ■ Finely divides chips ■ 30% increase in cutting speed ■ Reduces friction and temperature rise at the cutting edge, improving tool life by 50% ■ High versatility that does not depend on the machine used ■ Established coolant nozzle technology *For more details, please refer to the PDF document or feel free to contact us.

Company：森一産業
Price：Other

Other cutting tools
Turning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Turning tool "CoroTurn Prime"

The largest class of innovation in the history of turning tools! Introduction of additional cutting heads.

The "CoroTurn Prime" is a new tool that enables high feed rates and extends tool life. Compared to conventional turning, it generates thin and wide chips, which helps to disperse the load and heat on the tool. This allows for high production machining with high feed rates and longer tool life. Additionally, it can perform external diameter, face, and undercut machining, making it suitable not only for general turning operations but also for significantly high feed machining with "PrimeTurning." 【Features】 ■ Twice the machining conditions ■ Longer tool life ■ Increased productivity ■ Reduced cutting load and heat on the cutting edge during machining ■ Capable of machining in various directions *For more details, please refer to the PDF document or feel free to contact us.

Company：森一産業
Price：Other

Other cutting tools
Turning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Turning tool "CoroCut QD"

High rigidity of chip mounting, long lifespan even with increased productivity! Maximum machining depth of 1.8 times with a square shank.

The "CoroCut QD" is a turning tool that significantly improves tool life. Coolant is supplied from both the clearance and rake faces through the inside of the insert, greatly enhancing insert life. Additionally, the well-established rail lock is adopted from an insert width of 2.0mm. We also offer a lineup of chip with corner radius and wiper inserts, along with a wide variety of materials and breakers. 【Features】 ■ Suitable for deep parting operations ■ High insert mounting rigidity ■ Significant improvement in insert life ■ Compatible with various work materials using 6 materials and 7 breakers + α *For more details, please refer to the PDF document or feel free to contact us.

Company：森一産業
Price：Other

Other cutting tools
Turning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electric Mini Cutter Standard Type "HC-1007A-CH"

Cuts small curves without deviation! Ultra-lightweight compact cutter.

The electric mini cutter standard type "HC-1007A-CH" is an ultra-lightweight small cutter. It can cut small curves without deviation, and thanks to its super hard blade, it is capable of cutting super fibers such as aramid fibers, Kevlar, Vectran, and Zylon. It can also cut PBO fiber Zylon. 【Features】 ○ Capable of cutting super fibers ○ Can also cut PBO fiber Zylon ○ Ultra-lightweight ○ Compact For more details, please contact us or download the catalog.

Company：アルスコーポレーション
Price：Other

cutter
Turning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Turning Series Product Catalog

The Artisan Series that realizes "It would be amazing if it existed"! Lineup includes "Adjuster King" and "MT-BS"!

This catalog introduces the "Turning Series" handled by Maruichi Cutting Tools. The "MTMS Super Chamfer Round for Automatic Lathes - Zero" is specialized for automatic lathes, featuring handle diameters of φ7 and φ10. It allows for chamfering processing. In addition, we offer a wide range of products including the "MT-JE End Mill for Automatic Lathes" and the "MTUDC 2-Head Holder for Automatic Lathes." Please use this for selecting products. [Featured Products (Partial)] ■ MTMS Super Chamfer Round for Automatic Lathes - Zero ■ NC-MT Super Chamfer Round for Lathes - Zero ■ MT-JE End Mill for Automatic Lathes ■ MT-JS Coolant Sleeve for Automatic Lathes *For more details, please refer to the PDF document or feel free to contact us.

Company：丸一切削工具
Price：Other

lathe
Turning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Turning Tool | Taper Cutting | 'SYSTEM 222'

The "SYSTEM 222" has been added to the expanding Grooving program of Gühring. Reliable performance with insert and cutting edges for compression molding.

The grooving system that Guhring, a cutting tool manufacturer with extensive experience, is rapidly expanding. The newly added 'SYSTEM 222' can be applied to face turning and grooving with a 22mm insert length and two corners. *For more details, please refer to the PDF document or feel free to contact us.*

Company：グーリングジャパン
Price：Other

Other cutting tools
lathe
Turning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Turning Tools | Drilling & Boring | 'Quattro Drill'

Over 125 years of establishment, a German-based global manufacturer has developed the multifunctional turning tool for drilling and boring processing, 'Quattro Drill'.

The multifunctional turning tool "Quattro Drill" supports various applications with a single tool, enabling tool consolidation and reduction of tool change cycle times. It can perform various turning operations such as center hole processing, drilling, boring, and chamfering with just one tool. The surface treatment uses Signum coating with a hardness of 5500 HV. Its unique diamond-shaped coolant outlet holes provide excellent cooling effects and maximize chip evacuation. *For more details, please refer to the PDF document or feel free to contact us.*

Company：グーリングジャパン
Price：Other

Other cutting tools
Turning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

A handy mini cutter for when you want to make a quick cut!

Safe, convenient, and ready to use. With MagneTouch, work becomes smarter!

It is convenient to use a cutter just a little bit when you want to open cardboard boxes or food bags. It features a mechanism that automatically retracts the blade, so you don't have to worry about leaving the blade exposed after use. This reduces the risk of accidents and injuries. The cutter has a magnet inside, allowing it to be attached to metal surfaces, which minimizes the chances of losing it or it rolling away. Equipped with a stainless steel blade, it can be washed, making it hygienic. 【Features】 ■ Simple design that allows you to extend the blade by pushing the slider ■ Comes with a magnet to prevent loss by attaching it to steel furniture or refrigerators ■ Reduces the risk of injury by preventing the blade from being left exposed ■ Washable stainless steel blade ■ Not a replaceable blade type *Please feel free to contact us.

Company：OLFA CORPORATION
Price：Other

cutter
Cutter/Scissors
Safety Products
Turning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

PCD Turning Tool Comprehensive Catalog

[Free Catalog Available] Expect high-precision processing! We have a comprehensive lineup featured.

This catalog is a comprehensive catalog featuring a wide range of "PCD cutting tools" handled by Toyo Corporation. PCD (Polycrystalline Diamond) is made by sintering synthetic diamond powder under high pressure. PCD tools have minimal adhesion to the workpiece, allowing for high-precision machining, and they excel in high-speed cutting and wear resistance, which can lead to a reduction in total costs. Our lineup includes tool shapes suitable for cutting non-metals such as aluminum, aluminum alloys, copper, copper alloys, resins, and wood. [Contents] PCD Cutting Tools ■ Holder for external diameter, comb blade type ■ Holder for external diameter, turret type ■ Holder for internal diameter, comb blade type ■ For small diameters ■ Holder for external diameter & PCD chip, comb blade type ■ Holder for internal diameter & PCD chip, comb blade type ■ Holder for external diameter & PCD chip, turret type *For more details, please refer to the PDF document or feel free to contact us.

Company：東陽
Price：Other

byte
Other cutting tools
Turning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sumitomo Electric Industries, Ltd. Hard Metal Division: Product Guide

A lineup of coating materials for steel turning and versatile, high-precision corner cutting tools!

This document is a guide introducing the products of Sumitomo Electric Industries handled by Daito. It includes coating materials for steel turning such as "AC8015P/AC8020P/AC8025P/AC8035P," coated CBN sintered bodies for hardened steel processing "BNC2115/BNC2125," and versatile, high-precision corner rounding cutters "SEC-Wave Mill WEZ type," among others. Please use this for selecting products. [Contents] ■ Turning tools ■ Turning tools (CBN) ■ Milling tools ■ Drilling tools ■ End mills *For more details, please refer to the PDF document or feel free to contact us.

Company：大東
Price：Other

Other cutting tools
Turning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mitsubishi Materials Corporation Processing Business Company Business Introduction

Leave all your needs for turning tools, rotating tools, and cutting tools to us!

Mitsubishi Materials Corporation's Processing Business Company handles turning tools, rotary tools, and gear cutting tools, among others. We offer long-lasting and easy-to-use grooving and parting-off tools, such as the "GW Series," and solid drills for counterboring, like the "MFE Series." Additionally, we specialize in solutions for the automotive and aerospace industries, providing proposals for solution packages based on our unique technologies and know-how. *Please feel free to contact us for more details.

Company：三菱マテリアル加工事業カンパニー
Price：Other

Other work tools
Turning tools

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mini cutter

Many models compatible with 12mm thick carabiners! A mini cutter that can safely cut hard steel wire.

We would like to introduce the "Mini Cutter" handled by Ocean Precision Engineering Co., Ltd. This is a series of mini cutters that can safely cut hard steel wire. Starting with the powerful 250mm model "TS-1000," which can cut hard steel wire with a diameter of φ2.3mm, we also offer the "ATS-200," and the ultra-lightweight 280mm clipper "TS-11," which can cut hard steel wire with a diameter of φ3mm and soft steel wire with a diameter of φ5mm. 【Features】 ■ The blade is made from specially selected JIS SK-85 tool steel ■ The blade edge is adjusted to a hardness of HRC58-60, providing excellent durability ■ It exhibits sharp cutting performance ■ The model compatible with carabiner tool holders can accommodate extra-thick carabiners with a diameter of φ12mm ■ Cutting capacity: soft steel wire φ04mm, hard steel wire φ2mm (However, the TS-1000 can cut hard steel wire up to φ2.3mm, and the STC-8K and SAC-8K can cut hard steel wire up to φ1.6mm) *For more details, please refer to the PDF document or feel free to contact us.

Company：大洋精工本社・工場
Price：Other

Work tools
cutter
Pipe and cable cutters
Turning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Small diameter screw cutting milling cutter

Installed on a dedicated automatic lathe, it is particularly suitable for mass production screw machining of non-ferrous metal screw parts!

The "Small Diameter Thread Cutting End Mill" is mounted on a dedicated automatic lathe and is primarily used for mass production threading of non-ferrous metal screw parts. This product is formed with leaded threads and synchronously rotates the workpiece and the thread cutting end mill in the same direction, performing thread cutting in one rotation. The types of screws that can be cut range widely from parallel screws such as metric screws and unified screws to pipe taper screws, with various types available depending on the kind of automatic lathe used, including Traub type, Tsugami type, and Tsugami Fuji type. 【Features】 ■ Contributes to cost reduction with high-speed processing that performs thread cutting in one rotation ■ Fine cutting layers are produced due to intermittent cutting, allowing for good chip removal ■ Re-sharpening of cutting edges is also possible *For more details, please refer to the PDF document or feel free to contact us.

Company：大岡製作所
Price：Other

Milling machine
Milling
Turning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thread cutting end mill for large diameter internal threads

Compared to screw cutting by part-time work, the processing time is shorter and the accuracy is also stable!

There are several uses for thread milling cutters, but the "large diameter thread cutting milling cutter" is formed with a thread profile that has no lead, and it comes with the condition that the length of the threaded section is longer than the processed male thread. By feeding the workpiece one lead in the axial direction for each full rotation of the milling cutter, or by continuing to cut until the workpiece rotates 1.1 to 1.2 times or the milling cutter makes 1.1 to 1.2 revolutions around the inner diameter of the workpiece, a complete male thread is machined. This results in shorter processing times and greater accuracy compared to thread cutting with a cutting tool. 【Features of Our Products】 - The material of the thread milling cutter is made from high-speed tool steel containing Co, considering stable tool life. - Upon request, it is also possible to supply versions with carbide tips to enhance tool life. - We can accommodate requests for various shapes of thread milling cutters. *For more details, please refer to the PDF document or feel free to contact us.

Company：大岡製作所
Price：Other

Milling machine
Milling
Turning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thread milling cutter for internal threading

There are "single-screw milling" and "multi-screw milling"!

The "screw cutting milling cutter for external threads" includes "single-start thread milling cutter" and "multi-start thread milling cutter." The "single-start thread milling cutter" is tilted to match the lead angle of the screw being cut, and cutting is performed by feeding it up to the length of the external thread. The "multi-start thread milling cutter" is aligned parallel to the screw being cut, and a feed is applied in the axial direction for each rotation of the workpiece, continuing the cutting until the workpiece has rotated 1.1 to 1.2 times, resulting in a complete external thread. 【Features of Our Products】 ■ The material of the thread cutting milling cutter is made of high-speed tool steel containing Co, considering stable tool life. ■ Depending on your requirements, it is also possible to supply tools with carbide tips to enhance tool life. ■ We can accommodate requests for various shapes of thread cutting milling cutters. *For more details, please refer to the PDF materials or feel free to contact us.

Company：大岡製作所
Price：Other

Milling machine
Milling
Turning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Turning Tool Catalog

A wide variety of tool holders, adapters, chips, and more, featuring numerous turning tools!

Seco Tools is a company that provides metal cutting solutions related to milling, turning, hole processing, and tooling systems on a global scale. This catalog features a wide range of 'turning tools' that we handle. We offer a rich lineup of various holders, inserts, breakers, and more. [Contents] ■ ISO Turning Tools ■ MDT ■ Mini Shafts ■ Grooving ■ Parting Tools, etc. *For more details, please refer to the PDF document or feel free to contact us.

Company：セコ・ツールズ・ジャパン本社
Price：Other

Other cutting tools
Other work tools
Turning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Turning tool "Tiger-tec Silver-ISO P (iron-based)"

Improved processing reliability through mechanical post-processing! Especially enhanced safety on mass production lines.

"Tiger・tec Silver-ISO P (iron-based)" is a new generation of cutting inserts for iron, developed through a combination of new materials and new chip breakers. It features a silver escape surface with an indicator coating that makes wear detection easier. The number of various inserts used in processing has been reduced. It has achieved up to a 75% improvement in performance for turning steel materials. 【Features】 ■ Up to 75% performance improvement ■ Reduction in the number of various inserts used in processing ■ Improved processing reliability, especially enhanced safety on mass production lines ■ Enhanced process reliability in interrupted cutting ■ Silver escape surface with an indicator coating that facilitates wear detection *For more details, please refer to the related link page or feel free to contact us.

Company：ワルタージャパン
Price：Other

Other cutting tools
Turning tools

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tiger·tec Silver - ISO K (Cast Iron Type)

Introduction of cutting tools that can shorten processing time by achieving the maximum cutting speed.

"Tiger・tec Silver - ISO K (cast iron series)" is a turning tool that demonstrates high performance quickly and reliably. With Tiger・tec Silver technology and MK5, RK5, and RK7 chip breakers, it achieves maximum cutting speeds, thereby reducing machining time. It features a post-grinding treatment of the chip seat surface for interrupted cutting and cast surface machining, along with mechanical processing after coating, ensuring high process reliability. 【Features】 ■ Up to 75% extension of tool life, reducing tool costs ■ Reduction of machining time by achieving maximum cutting speeds ■ High process reliability through mechanical processing *For more details, please refer to the related link page or feel free to contact us.

Company：ワルタージャパン
Price：Other

Other cutting tools
Turning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Turning tool "HIPIMS WNN10 - ISO N"

Achieving a long tool life even in workpieces with improved surface roughness and a high tendency for welding!

The "HIPIMS WNN10 - ISO N" is a turning tool with extremely good adhesion of the coating, resulting in no peeling and uniform wear. It achieves a long tool life even with workpieces that have a high tendency to weld due to improved surface roughness. It possesses extremely good surface quality, dimensional accuracy, and high process reliability. 【Features】 ■ Extremely good surface quality and dimensional accuracy ■ High process reliability ■ No peeling and uniform wear due to extremely good adhesion of the coating ■ Achieves long tool life even with workpieces that have a high tendency to weld due to improved surface roughness *For more details, please refer to the related link page or feel free to contact us.

Company：ワルタージャパン
Price：Other

Other cutting tools
Turning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Turning tool "NRS chip breaker for heat-resistant alloys"

Lifespan improved by up to 150%! Reliable processing of unstable components is possible.

The "NRS chip breaker for heat-resistant alloys" is a turning tool that reduces heat generation during the machining of high heat-resistant alloys. We offer Walter NMS and NRS for heat-resistant alloys (e.g., Inconel 718) and Walter NFT/NMT/NRT for titanium alloys (e.g., Ti6Al4V). By reducing cutting resistance, it enables reliable machining of unstable components. 【Features】 - Reduced heat generation during the machining of high heat-resistant alloys - Lifespan of NMS/NRS chip breakers improved by up to 150% - NMS chip breaker: medium roughing / medium finishing - NRS chip breaker: roughing - Reliable machining of unstable components made possible by reducing cutting resistance *For more details, please refer to the related link page or feel free to contact us.

Company：ワルタージャパン
Price：Other

Other cutting tools
Turning tools

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

PCM Company broaching tool

It is easy to perform hexagonal hole machining on a lathe.

The tool is eccentric and can be turned with about 20% of the force used for processing with a press. In the case of machining on a lathe, concentric processing can be performed, allowing for improved part accuracy and reduced processing time.

Company：エスアンドエフ
Price：Other

Other cutting tools
Turning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

MAS PSI Turn

Direct fuel supply hose-less coolant through bite

It's not just about inner diameter and grooving processes. The results of outer diameter processing can also change depending on how coolant is applied. With PSI Turn, anyone can apply coolant precisely to the cutting edge. This is effective in improving chip troubles and reducing the frequency of tool changes. PSI Turn was developed to safely advance the machining process and increase productivity through internal lubrication processing. It can accurately supply coolant to the cutting edge from two directions: the relief face and the rake face, making chip removal easier and helping to reduce wear. The head is designed to be as compact as possible, minimizing the risk of chips wrapping around it.

Company：山田マシンツール
Price：Other

byte
Turning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

VARGUS's GROOVEX tool for grooving and turning machining

We offer a wide range of products for grooving, boring, and turning processes!

【Features】 - VG-Cut: Grooving, parting, turning, profiling, end face grooving. - GrooVical: Shallow grooving, turning. High precision. - micro-scope: Minimum machining diameter from 1mm. Boring, grooving, threading. - Mini-V: Minimum machining diameter from 7.8mm. Boring, grooving, threading. *For more details, please refer to the PDF document or feel free to contact us.

Company：Cominix
Price：Other

Other machine tools
Other processing machines
others
Turning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Bowling Tool Series / Multi-Mat Concept

Diverse machining solutions for various types of workpieces.

The boring tool series features high shank rigidity and comes with an oil wheel for long life. It offers a wide range of shank sizes from φ8 to φ50mm. Additionally, it accommodates various work materials thanks to Swiss high-quality master chips. For more details, please download the catalog.

Company：ノア
Price：Other

Other cutting tools
Turning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cutting, grooving, turning processing "Cut Line"

Stable and long-lasting processing without fear, with a maximum processing diameter of φ42.

The "Cut Line" for notching, grooving, and turning processing is a Swiss craftsmanship. It offers high rigidity, wear resistance, excellent sharpness, and superior chip removal. You can choose from two maximum processing diameters: φ34 and φ42. For more details, please download the catalog.

Company：ノア
Price：Other

Cutting Oil
Turning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sandvik Coromant S205

New CVD-coated carbide grade for high-speed finishing of heat-resistant alloys (HRSA)!

The "Sandvik Coromant S205" is a new material grade for machining heat-resistant alloys, suitable for high-speed finishing of difficult-to-machine materials such as aircraft engine components. It achieves a cutting speed of 80-120 m/min. By combining the low cutting angle concept of CoroTurn® Prime with the new material grade S205, the rate of chip removal and the volume of chip removal have significantly increased, effectively suppressing the predominant wear mode of boundary wear during heat-resistant alloy machining. 【Features】 ■ Inveio® coating technology is also applied to S205. ■ With overwhelming heat resistance and wear resistance improvements, it demonstrates exceptional performance in high-speed cutting applications compared to conventional materials. ■ Post-treatment technology enhances the mechanical strength of the coating, significantly improving edge reliability. *For more details, please refer to the PDF document or feel free to contact us.

Company：森一産業
Price：Other

alloy
Turning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Turning tools Product List and Ranking from 22 Manufacturers, Suppliers and Companies

Turning tools Manufacturer, Suppliers and Company Rankings

Turning tools Product ranking