16～21 item / All 21 items
Equipped with two distortion sensors for simultaneous measurement. Custom orders and modifications are also accepted.
Waterproof tester for waterproof mobile phones and electronic devices with simple operation in a dialogue format using LCD display.
Maximum measurement pressure 20 kPa! Inspection is possible even for open-type components that are not in a sealed structure. Custom orders and modifications are also accepted.
The "Waterproof Tester for Waterproof Connectors WPC6900P002/M" allows for airtight waterproof testing by setting open-type waterproof components on a pseudo-workpiece. It can also test open-type components that are not sealed. The maximum measurement pressure is 20 kPa, equivalent to a water depth of 2 meters. Pressure adjustment is possible in units of 1 kPa. The leak detection method uses air pressure for distortion measurement, with a distortion detection resolution of 0.1 μm and a distortion detection contact pressure of approximately 15 g (measured value). The number of workpieces that can be measured simultaneously is one. For more details, please contact us or refer to the catalog.
Supports pressure equivalent to a water depth of 95m! Four-channel smartwatch low-pressure and high-pressure waterproof testing device. Custom orders and modifications are also accepted.
The "WPC6540P10/A" is a low-pressure and high-pressure waterproof testing device for smartwatches, equipped with four circuits of strain sensors inside the capsule. By utilizing three different measurement modes, it enables high-precision leak detection for both low and high pressures. In low-pressure mode, it can be set in 1 kPa steps, allowing for stable leak detection even for workpieces that are easily deformed by pressure. Measurement can be performed simply by changing the bracket to match the shape of the workpiece, contributing to reduced running costs. 【Features】 ■ Four circuits of strain sensors inside the capsule ■ Capable of measuring smartwatches with bands ■ Maximum measurement pressure of 950 kPa (equivalent to a water depth of 95m) ■ Stable leak detection even for workpieces that are easily deformed by pressure ■ Detectable even with different shapes if inspection conditions are the same ■ Minimal running costs *For more details, please refer to the PDF document or feel free to contact us.
A waterproof testing device for analysis that inspects leakage points in the work using emerging bubbles. Custom orders and modifications are also accepted.
The "HPT8701P02" is a waterproof testing device for analysis that inspects the leakage points of a workpiece by submerging it in water after pressurizing it with air inside a container, allowing bubbles to emerge. It is also possible to inspect for water leakage at depths of up to 20 meters by directly submerging the workpiece and pressurizing it with air. This product allows for the insertion of a pressurized workpiece into water, and when the air inside the container is exhausted, bubbles will emerge from any leaking workpiece, indicating that there is a leak. 【Features】 ■ Pressure: Max 0.2 MPa ■ Capable of inspecting for water leakage at depths of up to 20 meters ■ Containers can be designed to fit the workpiece size and test pressure *For more details, please refer to the catalog or feel free to contact us.
Hamron Tech is the world's only specialized manufacturer of waterproof testing equipment that handles all detection methods: distortion detection, differential pressure, gauge pressure, and submersion methods.
The differential pressure method is currently known as the most popular airtight waterproof testing device. The differential pressure method is also referred to as the "volume detection method" because when a constant pressure is applied within a constant volume, the pressure changes due to the volume of the pressurized space changing as air flows into the workpiece. When used as an actual field device, the following factors can appear as judgment noise: (1) Variability in the space (volume) of the capsule when the workpiece is inserted (it is desirable to keep this as small as possible). (2) Variability in the shape (volume) of the workpiece. (3) Changes in the shape (volume) of the workpiece due to pressurization. (4) Pressure changes due to variations in the temperature of the workpiece and its surroundings. (5) Changes in the volume of the pneumatic circuit. While quantitative judgment (defining the leakage amount numerically for pass/fail determination) is possible, these noises can potentially lead to misjudgment. *WPC is not affected by these judgment noises.
Introducing an environmental testing device that conducts spray tests compliant with DIN VDE 0470 T1 or EN 60529!
The "SWT Series" is an IP waterproof testing device capable of testing protection levels IPX3 and IPX4. With the integration of a built-in timer, the automated testing process time can be set from 3 seconds to 30 hours. As an option, a water circuit system that minimizes water consumption can be installed. Additionally, we also offer the "VSPT Series," which complies with the standards ISO 20653 and IEC/EN 60529. Please feel free to contact us if you have any inquiries. 【Features】 ■ Tests protection levels IPX3 and IPX4 ■ Complies with DIN VDE 0470 T1 or EN 60529 ■ Automated testing process time can be set from 3 seconds to 30 hours ■ Option to install a water circuit system that minimizes water consumption *For more details, please refer to the PDF materials or feel free to contact us.
