We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for nozzle.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

nozzle(1mm) - List of Manufacturers, Suppliers, Companies and Products

nozzle Product List

1～6 item / All 6 items

Displayed results
Nozzle "100 SUS Type"

Nozzle "100 SUS Type"

Ideal for rapid water removal, general water removal, and drying of water-based two-component paints! High-flow nozzle SUS

The "100SUS Type" is an energy-saving nozzle made of stainless steel that is incorporated into cleaning devices for simultaneous water drainage and drying after the rinsing tank (finishing tank). The slit width can be easily adjusted, and if there is any disturbance in the blowing wind speed, the issue can be resolved on the spot by adjusting the slit width. Additionally, the blowing angle can also be easily adjusted. It is mainly used for sorting good and defective products, such as food. 【Features】 ■ Made of stainless steel ■ Achieves high wind speed with low pressure loss ■ Significantly reduces electricity consumption ■ Provides uniform high performance air across the entire slit ■ Slit width is easily adjustable *For more details, please refer to the catalog or feel free to contact us.

  • nozzle
  • Drying Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Nozzle "65SUS Type"

Nozzle "65SUS Type"

Low pressure loss! Low cost! Lightweight! Energy-saving hybrid blow nozzle SUS.

The "65SUS type" is an energy-saving nozzle made of stainless steel that dries while draining water from the rinsing tank (finishing tank) incorporated into the cleaning device. The slit width can be easily adjusted, and if there is any disturbance in the air velocity, adjusting the slit width can resolve the issue on the spot. Additionally, all models come with fixed brackets (material USU), allowing for options of top, bottom, or side mounting by using the fixed brackets. It is mainly used for drying after water drainage of printed circuit boards and after cleaning bolts and nuts. 【Features】 ■ Made of stainless steel ■ Achieves high air velocity with low pressure loss ■ Significantly reduces electricity consumption ■ Provides uniform high performance air across the entire slit ■ Slit width is easily adjustable *For more details, please refer to the catalog or feel free to contact us.

  • nozzle
  • Drying Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Nozzle "75SUS Type"

Nozzle "75SUS Type"

The electric consumption of the supply air source generation device can be significantly reduced with the hybrid blow nozzle SUS.

The "75SUS type" is an energy-saving nozzle made of stainless steel that dries while draining water from the rinse tank (finishing tank) incorporated into the cleaning device. It features a simple internal rectifying structure, allowing for very low pressure loss and high airspeed. The electricity consumption of the air supply source generation device can also be significantly reduced. Additionally, by using the high blow nozzle SUS in the draining and drying tanks, it can be designed compactly, reducing the installation space. It is mainly used for air curtains to prevent the intrusion of outdoor pests and other contaminants. 【Features】 ■ Made of stainless steel ■ Achieves high airspeed with low pressure loss ■ Significantly reduces electricity consumption ■ Provides uniformly high performance across the entire slit ■ Slit width is easily adjustable *For more details, please refer to the catalog or feel free to contact us.

  • nozzle
  • Drying Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Nozzle "SUS125 Type"

Nozzle "SUS125 Type"

Ideal for water drainage and drying after plate cleaning and for water drainage after sheet cleaning!

The "SUS125 type" is an energy-saving nozzle made of stainless steel that is incorporated into cleaning devices to dry while draining water from the rinsing tank (finishing tank). It features a simple internal rectifying structure, allowing for very low pressure loss and high airspeed. This can significantly reduce the electricity consumption of the air supply generation device. Additionally, by using the high blow nozzle SUS in the draining and drying tanks, it can be designed compactly, reducing the installation space. It is mainly used for water drainage and drying after washing steel plates, draining after washing sheets, and removing polishing powder after glass polishing. 【Features】 - Made of stainless steel - Achieves high airspeed with low pressure loss - Significantly reduces electricity consumption - Provides uniform high performance across the entire slit - Slit width is easily adjustable *For more details, please refer to the catalog or feel free to contact us.

  • nozzle
  • Drying Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Nozzle maintenance start (molding machine parts cleaning service)

Nozzle maintenance start (molding machine parts cleaning service)

We have started a cleaning service for molding machine parts, including our shut-off nozzles, using the high-performance fluidized bed cleaning furnace installed in-house.

◎Contract Cleaning Services The fluidized bed technology developed in the United States and Europe has undergone unique advancements, particularly establishing a solid position in the cleaning of parts for resin molding machines. Over time, the effectiveness of the cleaning capabilities of the furnace has become evident, leading to the development of excellent equipment used even for cleaning synthetic fiber nozzles (spinnerets). This fluidized bed technology achieves homogeneous fluidization control at low pressure, allowing for the sublimation of adhered resin in a short time and enabling extremely high-level cleaning of synthetic fiber nozzles and shut-off nozzles. Since no tools or abrasives are used, it does not create unnecessary scratches or dents on the interior. Additionally, due to strict temperature control, issues such as hardness reduction do not occur, resulting in safe and high-quality cleaning outcomes. Our company has introduced a high-performance fluidized bed cleaning furnace in-house to begin maintenance of Herzog's shut-off nozzles and to meet the cleaning needs for spinnerets and breaker plates. We recommend that you request cleaning from us as soon as possible before the resin carbonizes. If done before carbonization, it can be easily removed, as shown in the attached photo, allowing for extremely high-level cleaning.

  • Calibration and repair

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Precision Machining Case Study of Nozzles in the Automotive Industry

Precision Machining Case Study of Nozzles in the Automotive Industry

Processing and treatment are carried out using lathes, EDM wire, and die-sinking discharge. Examples of production for the automotive industry.

WTM Corporation has a track record of procuring precision machined parts of Japanese quality from overseas for 18 years. We respond with sincerity to "a variety of products, from one piece," managing everything from procurement sources to processes and inspections in a comprehensive manner. This time, we would like to introduce a case study of nozzles for the automotive industry. The processing and treatment were carried out using lathes, EDM wire, and die-sinking discharge. The size is 24×10×32.3mm, and the material is SKH51 (HRC60-62). 【Project Overview】 - Product Name: Nozzle - Material: SKH51 (HRC60-62) - Size: 24×10×32.3mm - Processing/Treatment: Lathe, EDM wire, die-sinking discharge - Industry: Automotive < WTM Supporting Solutions for Manufacturing Challenges > For more details, please view our company brochure by clicking on "Download Catalog" below, or feel free to contact us.

  • Company：WTM
  • Price：Other
  • Processing Contract
  • Other machine elements
  • Other contract services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.