We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for nozzle.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

nozzle(sus) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

nozzle Product List

1～11 item / All 11 items

Displayed results
Nozzle "75SUS Type"

Nozzle "75SUS Type"

The electric consumption of the supply air source generation device can be significantly reduced with the hybrid blow nozzle SUS.

The "75SUS type" is an energy-saving nozzle made of stainless steel that dries while draining water from the rinse tank (finishing tank) incorporated into the cleaning device. It features a simple internal rectifying structure, allowing for very low pressure loss and high airspeed. The electricity consumption of the air supply source generation device can also be significantly reduced. Additionally, by using the high blow nozzle SUS in the draining and drying tanks, it can be designed compactly, reducing the installation space. It is mainly used for air curtains to prevent the intrusion of outdoor pests and other contaminants. 【Features】 ■ Made of stainless steel ■ Achieves high airspeed with low pressure loss ■ Significantly reduces electricity consumption ■ Provides uniformly high performance across the entire slit ■ Slit width is easily adjustable *For more details, please refer to the catalog or feel free to contact us.

  • nozzle
  • Drying Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Nozzle "100 SUS Type"

Nozzle "100 SUS Type"

Ideal for rapid water removal, general water removal, and drying of water-based two-component paints! High-flow nozzle SUS

The "100SUS Type" is an energy-saving nozzle made of stainless steel that is incorporated into cleaning devices for simultaneous water drainage and drying after the rinsing tank (finishing tank). The slit width can be easily adjusted, and if there is any disturbance in the blowing wind speed, the issue can be resolved on the spot by adjusting the slit width. Additionally, the blowing angle can also be easily adjusted. It is mainly used for sorting good and defective products, such as food. 【Features】 ■ Made of stainless steel ■ Achieves high wind speed with low pressure loss ■ Significantly reduces electricity consumption ■ Provides uniform high performance air across the entire slit ■ Slit width is easily adjustable *For more details, please refer to the catalog or feel free to contact us.

  • nozzle
  • Drying Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Nozzle "65SUS Type"

Nozzle "65SUS Type"

Low pressure loss! Low cost! Lightweight! Energy-saving hybrid blow nozzle SUS.

The "65SUS type" is an energy-saving nozzle made of stainless steel that dries while draining water from the rinsing tank (finishing tank) incorporated into the cleaning device. The slit width can be easily adjusted, and if there is any disturbance in the air velocity, adjusting the slit width can resolve the issue on the spot. Additionally, all models come with fixed brackets (material USU), allowing for options of top, bottom, or side mounting by using the fixed brackets. It is mainly used for drying after water drainage of printed circuit boards and after cleaning bolts and nuts. 【Features】 ■ Made of stainless steel ■ Achieves high air velocity with low pressure loss ■ Significantly reduces electricity consumption ■ Provides uniform high performance air across the entire slit ■ Slit width is easily adjustable *For more details, please refer to the catalog or feel free to contact us.

  • nozzle
  • Drying Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Nozzle "SUS125 Type"

Nozzle "SUS125 Type"

Ideal for water drainage and drying after plate cleaning and for water drainage after sheet cleaning!

The "SUS125 type" is an energy-saving nozzle made of stainless steel that is incorporated into cleaning devices to dry while draining water from the rinsing tank (finishing tank). It features a simple internal rectifying structure, allowing for very low pressure loss and high airspeed. This can significantly reduce the electricity consumption of the air supply generation device. Additionally, by using the high blow nozzle SUS in the draining and drying tanks, it can be designed compactly, reducing the installation space. It is mainly used for water drainage and drying after washing steel plates, draining after washing sheets, and removing polishing powder after glass polishing. 【Features】 - Made of stainless steel - Achieves high airspeed with low pressure loss - Significantly reduces electricity consumption - Provides uniform high performance across the entire slit - Slit width is easily adjustable *For more details, please refer to the catalog or feel free to contact us.

  • nozzle
  • Drying Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Processing Example] Nozzle

[Processing Example] Nozzle

Examples of machining SUS and BS with welding processing applied to the tapered section.

We would like to introduce precision machining examples from Shanghai Nichiken Precision Machinery Co., Ltd. Our company is capable of a wide range of services including machining centers, lathes, milling, NC processing, various types of grinding, wire cutting, electrical discharge machining, and various surface treatments. We have a strong workforce of skilled craftsmen, including subcontractors, with rich experience and machining know-how, allowing us to handle a wide variety of tasks, and we also ensure complete quality assurance. We provide many benefits to our customers with small lot machining parts, such as prototypes and single items. 【Machining Example】 ■Product Name: Nozzle ■Material: SUS, BS ■Lot: 100 pieces ■Features: ・Machining of tapered areas ・Welding processing *For more details, please feel free to contact us.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Examples of manufactured products: "Stainless steel nozzle, piping cover"

Examples of manufactured products: "Stainless steel nozzle, piping cover"

Stainless steel nozzles and piping covers can be custom-made to your specifications! *We are currently offering a free collection of examples of custom-made products!

This is an introduction to custom-made stainless steel nozzles and piping covers. At Sakashige, we specialize in custom manufacturing various products and jigs tailored to the needs of production facilities, workers, and work environments. 【Do you have any of these concerns?】 ■ I want a SUS nozzle, but there are no manufacturers that can create it... ■ The piping is exposed, and I want to implement safety measures... ■□■ Key service areas: Mie Prefecture, Hokusei District, Chusei District (surrounding Mie) ■□■ *Please view the PDF data of custom processing case studies available for download.

  • Other services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
S nozzle

S nozzle

It bends flexibly and has excellent durability. A wide variety of types are available, including different lengths, bending radii, and bending strengths.

We handle the "S Nozzle," a coolant nozzle using interlock flexible tubing. The flexible tube is made of SUS304, the inner tube is PE + aluminum, and the screw joint and tip nozzle are made of brass + nickel plating, each made from different materials. We offer a variety of types with different lengths and bending strengths, so please feel free to contact us if you have any requests. 【Lineup】 ■SN-S ■SN-1 ■SN-2 ■SN-3 ■SN-4 *For more details, please refer to the PDF document or feel free to contact us.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Nozzle

Nozzle

The material is ultra-hard alloy, non-magnetic ultra-hard alloy! We manufacture in a single round shape with hole sizes from φ0.08 and above.

We would like to introduce the "nozzles" handled by Sanwa Creation Co., Ltd. These are precision nozzles made of cemented carbide, primarily used for electronic component suction nozzles and sealing nozzles. We can manufacture round shapes with hole diameters from φ0.08 and are happy to discuss elliptical or irregular shapes as well. 【Specifications】 ■ Material: Cemented carbide, non-magnetic cemented carbide We also have a track record of manufacturing with other materials such as ceramics and SUS! *For more details, please refer to the related links or feel free to contact us.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Interchangeable head S nozzle (coolant nozzle)

Interchangeable head S nozzle (coolant nozzle)

No sealing tape needed due to the end packing stop! Aluminum + PE pipe used for the inner part.

We would like to introduce the "Interchangeable Head S Nozzle (Coolant Nozzle)" that we handle. This nozzle maintains a bent shape and is designed to discharge and spray liquid and air at any desired position, allowing for easy position changes while retaining its shape. Additionally, it features an interchangeable tip nozzle, enabling the replacement of the tip diameter. Due to the use of a tip packing seal, no sealing tape is required. It utilizes a metal spiral tube and incorporates an aluminum + PE pipe in the inner structure. 【Features】 ■ Easy to change position ■ Flat inner surface ■ Smooth fluid flow without causing liquid pooling ■ Strong holding power ■ Excellent durability *For more details, please refer to the related links or feel free to contact us.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tank cleaning nozzle 3D nozzle

Tank cleaning nozzle 3D nozzle

This is a high-pressure nozzle for cleaning the interior of stainless steel containers with a compact design and excellent corrosion resistance.

The "3D nozzle for tank cleaning" features a simple and compact structure, with the wetted parts made of reliable SUS304, allowing anyone to perform professional cleaning. By managing factors that contribute to cleaning effectiveness, such as pressure, water volume, cleaning time, and water temperature, consistent cleaning results can be achieved by anyone. It can be used at a maximum pressure of 12MPa and a maximum flow rate of 31L/min. The nozzle operates at a constant speed driven by a motor, ensuring stable cleaning effectiveness. The minimum inner diameter of the nozzle inlet is 58mm (can be inserted with a 2.5S hose fitting). Its small size makes it easy to use with minimal spray dead zones. For more details, please download the catalog or contact us.

  • maruyamaexcell_3Dnozuru_image.JPG
  • High pressure cleaner
  • Other cleaning machines
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stainless SUS430 Cutting Nozzle Development Proposal Quality Kansai

Stainless SUS430 Cutting Nozzle Development Proposal Quality Kansai

If you need development of stainless steel machining products in Kansai, leave it to us! 【Stainless Steel SUS430 Machining Nozzle Development Proposal Quality Kansai】

【Material】 SUS430 【Industry/Usage】 Industrial equipment-related industry 【Lot】 1 to 10,000 【Processing】 NC lathe machining center 【Details】 This is processed using SUS430. When considering stainless steel cutting parts, do you have any of the following concerns? - I don't know what processing method to use to manufacture the designed shape. - I want to reduce costs compared to conventional products, but I don't want to compromise on quality. - I want to consider from the design shape, but I can't come up with any ideas. Our company has the following features. ≪Matsui Manufacturing's Features≫ 1. Know-how and Ideas We have numerous achievements with major manufacturers in various industries (medical, kitchen, semiconductor, air conditioning, gas equipment, etc.)! Based on the insights gained from each industry, we will propose part shapes and processing methods! 2. Abundant Methods We possess a wide range of processing technologies that allow for consistent production! (Hot forging, cutting processing, brazing, bending processing, assembly, leak testing) 3. Speed Our sales department includes members who have experience in design and processing, allowing us to provide quick and appropriate responses to your requests! For more details, please visit our company website!

  • 大阪工場3.PNG
  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.