Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
1～30 item / All 32 items
Differential probe for noise measurement of switching power supplies
■Differential Characteristics CMRR=40dB (100MHz) ■Maximum Input Voltage ±200V DC or ACp-p ■Attenuation Ratio 1:1 ■Frequency Band DC to 100MHz ■Impedance 50Ω (above 1MHz) ■Input Capacitance 0.01μF (when terminated with TRC-50F2)
Flexible Optical Technology Non-Contact Shaft Measurement System
The T18 is a compact touch probe suitable for tool detection applications such as NC lathes and machining centers. The TS tool setter line is a compact tool setting application designed for use with machining centers.
Introducing non-magnetic conductive 300 series stainless steel!
The "Probe (Stainless Steel, Straight Type, 140mm)" features an ergonomic hexagonal handle. It is made of stainless steel, so it does not corrode. There is no problem using it with magnetized parts, and when placed on an ESD protective work surface, it can ground all generated static electricity. 【Features】 ■ Ergonomic hexagonal handle ■ Corrosion-resistant stainless steel ■ Safe to use with magnetized parts ■ Can ground all generated static electricity when placed on an ESD protective work surface ■ Made in the USA, high quality *For more details, please refer to the related link page or feel free to contact us.
Ideal for use in ESD protection areas! Introducing probes that won't damage delicate surfaces.
The probe (wood, 'ORANGESTICK', pack of 100) is a suitable material for use in ESD protected areas. It is high-quality, made in the USA, and comes in a pack of 100. It is heat-resistant and will not melt. Additionally, the wooden finish ensures that it does not scratch delicate surfaces. [Features] - Pack of 100 - Wooden finish prevents scratching of delicate surfaces - Suitable material for use in ESD protected areas - Heat-resistant and will not melt - Made in the USA, high quality *For more details, please refer to the related link page or feel free to contact us.
Introducing an ideal American-made probe for opening plastic cases.
The "Probe (Nylon, Flathead Screwdriver (Split Tip) 172mm)" is suitable for use in areas with electrostatic discharge protection. It is heat-resistant and will not melt, making it ideal for opening plastic cases. The nylon finish ensures that delicate surfaces are not scratched. Made in the USA, it is also suitable as a tool for removing batteries. 【Features】 - The nylon finish prevents scratching of delicate surfaces - Suitable for use in areas with electrostatic discharge protection - Heat-resistant and will not melt - Also suitable as a tool for removing batteries - Made in the USA *For more details, please refer to the related link page or feel free to contact us.
Compatible with various types of sockets! A probe that allows you to choose the tip shape according to your application.
The "RI-030LI-33-A2" is a standard design probe suitable for 0.4mm and 0.5mm pitch. It is versatile and can be used with various types of sockets. Additionally, you can choose from three different tip shapes according to your application. 【Material】 ■A Plunger: BeCu / Au-Plated ■Barrel: PB / Au-Plated ■Spring: SWP / Au-Plated ■B Plunger: BeCu / Au-Plated *For more details, please refer to the PDF document or feel free to contact us.
Quickly and reliably detect processing defects through analog scanning of the work surface.
Digital Log Revolution - BRC Radio Communication Technology. The Wireless Touch Probe TC64-DIGILOG is truly a digital log revolution, particularly suitable for machining centers and lathes. It quickly and reliably detects machining defects through analog scanning of the work surface. BRC radio communication technology wirelessly transmits the measured status signals to an external evaluation unit. Additionally, this system can also be utilized as a modular version of TC63-DIGILOG. 【Features】 ○ Reduced setup time ○ Realization of unmanned operation ○ Decreased scrap rate ○ Increased productivity ○ Enhanced product quality For more details, please contact us or download the catalog.
Current: 25A Maximum 2.0 mΩ
Kiyota Manufacturing has developed and produced a new product, a Φ4.0 spring probe for power semiconductor measurement. Features: Current: 25A, Maximum: 2.0 mΩ.
Easy to use anywhere, lightweight, and doesn't cause fatigue - a handy type.
■Features ● Handheld connector terminal insertion failure inspection tool ● Excellent portability with a user-friendly compact design ● Highly reliable design that quickly identifies good and defective products using LED and buzzer ● Simple operation by just pressing the plunger of the attacher against the connector terminal ● Easy replacement of probe pins to match the shape of the connector terminals ■Diagnostic Items ● Terminal disconnection ● Terminal misalignment ● Terminal absence ■Standard Products (Cartridge) Includes one each of S-302-20, S-303-20, and S-305-10. *For other shapes and spring pressures, please choose the 30 series with switch-equipped probes.
Easy to use and flexible! Captures signals within the bandwidth range with high CMRR and insulation resistance.
"SigOFIT" is a light isolation differential probe suitable for third-generation semiconductors such as SiC/GaN. It has a high common mode rejection ratio (CMRR) of 128dB at 100MHz and over 100dB at 1GHz, allowing for accurate signal measurement. Additionally, devices like SiC and GaN can switch high voltages containing high-energy high-frequency harmonics in just a few nanoseconds. 【Features】 ■ True Signal ■ Suitable for third-generation semiconductors ■ Excellent amplitude-frequency characteristics ■ Easy to use and flexible ■ Safety performance ■ Wide measurement range *For more details, please refer to the PDF document or feel free to contact us.
We will manufacture according to your specifications!
We measure the magnetic field in the vertical direction at the probe end face. Due to the embedding depth of the Hall sensor (0.2 mm ± 0.1), we adjust the measurement accuracy to within ±0.5%. We employ synchronous detection, which makes it less susceptible to induced noise from the probe cable. GaAs Hall sensors have the advantages of a small temperature coefficient of sensitivity during constant current operation, good linearity with respect to magnetic field strength, and excellent high-frequency characteristics. If there is no product type that meets your requirements, we can also manufacture it according to your specifications.
We will manufacture according to your specifications!
We measure the magnetic field in the vertical direction relative to the axis width. There are different types of probe substrates with varying widths and thicknesses, which can be selected according to the application. Due to the embedding depth of the Hall sensor (0.2 mm ± 0.1), we adjust the measurement accuracy within ±0.5%. GaAs Hall sensors have the advantages of a small temperature coefficient of sensitivity during constant current operation, good linearity with respect to magnetic field strength, and excellent high-frequency characteristics. If there is no product type that meets your needs, we can also manufacture it according to your specifications.
Various materials, shapes, dimensions, etc., are available considering electrical characteristics.
MJC has specialized in probing technology and has grown and developed over time. We have built an environment that ensures reliable contact with ever-evolving semiconductor devices and FPD devices, providing consistent and high-reliability inspection measurements. 【Features】 ○ Various materials, shapes, dimensions, etc., considering electrical characteristics are available. For more details, please contact us or download the catalog.
![Semiconductor Testing [Contact Probes, IC Sockets, Probe Cards]](https://image.mono.ipros.com/public/product/image/6d6/2000410005/IPROS91145408194563330894.jpeg?w=280&h=280)
Support for inspection of various electronic components! Precision research of TOTAL TEST SOLUTION!
This is an introduction to Seiken Co., Ltd., which handles contact probes used for electrical testing, semiconductor wafer inspection probe cards, and IC sockets. We offer a lineup of products including "contact probes" that cater to both standard and special specifications, "IC sockets" that can be configured with housing materials suited to specific applications, and "probe cards" that accommodate various inspection conditions, including narrow pitch through fine processing technology. Examples of inspection conditions: - Support for narrow pitch (MIN P=80μ) - High current testing (pre-process testing of IGBT devices) - Non-magnetic testing (probes made from non-magnetic materials) Leveraging the technology we have cultivated over many years, we continue to develop solutions that provide a more efficient inspection environment and meet more detailed requests. An overview of our products is available in the documentation. [Contents] ■ Introduction ■ Product and technology introduction (Contact Probes) - Introduction of new product technology ■ Technology introduction (IC sockets, probe cards) ■ Other various products and services (precision processing, etc.) *For more details, please refer to the PDF document or feel free to contact us.
Flange-shaped all-in-one sensor
Introducing the controller-integrated probe "GYAF1 Probe."
Achieving a 400MHz wide bandwidth! A differential probe that also features a high common mode signal rejection ratio.
The "BumbleBee" from Germany's PMK, which we handle, is a wideband, high-voltage differential probe that boasts a class-leading bandwidth of 400MHz and a common-mode rejection ratio of 100kHz/70dB. It enables balanced measurements with oscilloscopes in the 500MHz range and provides clean waveforms without noise. Additionally, it supports differential inputs of up to 2kV, allowing for high-voltage measurements to be conducted with ease. 【Features】 ■ Achieves class-leading bandwidth and common-mode rejection ratio ■ Supports four attenuation ratios: 50:1, 100:1, 250:1, and 500:1 *For more details, please download the catalog or contact us.
Log collection, export NetFlow to any flow collector!
Are you having trouble finding a tool that can dump traffic within the LAN? 'nProbe' operates immediately as a NetFlow probe simply by connecting to a mirror port or TAP. It collects logs for traffic analysis and exports NetFlow to any flow collector. 【Features】 ■ There is a risk of not being able to configure NetFlow → Generates NetFlow v5/v9 and IPFIX in probe mode ■ The protocols for export are not unified → Unifies to NetFlow v5/v9 and IPFIX, sending to any flow collector *For more details, please refer to the PDF document or feel free to contact us.
Introduction to the MEMS 3-Axis Accelerometer Calibration and Inspection Device (Static Acceleration Inspection)
The "MEMS 3-axis accelerometer calibration and inspection device" offers a total solution from probe sockets that match the package shape and non-damaging probe sockets to inline automation. We have a lineup that includes the self-contained mass production cell system "ACT-4125C," equipped with a loader-unloader that automatically inspects from low temperatures (-40°C) to high temperatures (+125°C), as well as the manual type for development, "ACT-4125-M22." 【Lineup】 <For Development> ■ Posture holding jig JIG007 ■ Manual type ACT-4125-M22 <For Mass Production> ■ Cell system ACT-4125C ■ Custom system *For more details, please refer to the PDF document or feel free to contact us.
It can be used together with parts that are magnetized without corroding!
The "Probe (Stainless Steel, Hook Type, 140mm)" features an ergonomically designed hexagonal handle. When placed on an ESD-protected work surface, it can ground all static electricity generated. Made of stainless steel, it does not corrode and can be used alongside magnetic parts without any issues. 【Features】 ■ Ergonomic hexagonal handle ■ Conductive 300 series stainless steel that does not utilize magnetism ■ Corrosion-resistant due to stainless steel construction ■ Safe to use with magnetic parts ■ Can ground all static electricity generated when placed on an ESD-protected work surface ■ Made in the USA, high quality *For more details, please refer to the related link page or feel free to contact us.
High quality made in America! No problem using it with magnetized parts.
The "Probe (Stainless Steel, Angled, 133mm)" features an ergonomically designed hexagonal handle. It is made of conductive 300 series stainless steel that does not utilize magnetism. It is corrosion-resistant and can be used alongside magnetic parts without any issues. This high-quality American-made product can ground all static electricity generated when placed on an ESD-protected work surface. [Features] - Ergonomically designed hexagonal handle - Conductive 300 series stainless steel that does not utilize magnetism - Corrosion-resistant due to stainless steel construction - Can be used alongside magnetic parts without any issues - Capable of grounding all static electricity generated when placed on an ESD-protected work surface *For more details, please refer to the related link page or feel free to contact us.
Ideal as a tool for removing batteries! Introducing an American-made probe.
The "Probe (Nylon, Cone - Minus Driver 177mm)" features a nylon finish that does not scratch delicate surfaces. It is suitable for use in areas with electrostatic precautions. It is heat-resistant and will not melt. Ideal for opening plastic cases and also suitable as a tool for removing batteries. 【Features】 - Nylon finish prevents scratching of delicate surfaces - Suitable for use in areas with electrostatic precautions - Heat-resistant and will not melt - Ideal for opening plastic cases - Made in the USA *For more details, please refer to the related link page or feel free to contact us.
Ideal for use in areas equipped with static electricity measures! Introducing American-made probes.
The "Probe (Nylon, Cone - Minus Driver, 140mm)" is an ideal product for opening plastic cases. It is also suitable as a tool for removing batteries. The nylon finish ensures that delicate surfaces are not scratched. It is suitable for use in areas with electrostatic precautions and is heat-resistant, so it will not melt. 【Features】 - The nylon finish prevents scratching of delicate surfaces - Heat-resistant and will not melt - Ideal for opening plastic cases - Also suitable as a tool for removing batteries - Made in the USA *For more details, please refer to the related link page or feel free to contact us.
We introduce a probe with a nylon finish that won't scratch delicate surfaces!
The "Probe (Nylon, Cone - Minus Driver 152mm)" is suitable for use in areas with electrostatic discharge protection. It is also ideal as a tool for removing batteries. Perfect for opening plastic cases. It is heat-resistant and will not melt, and the nylon finish ensures that delicate surfaces are not scratched. 【Features】 - Suitable for use in areas with electrostatic discharge protection - Heat-resistant and will not melt - Ideal for opening plastic cases - Also suitable as a tool for removing batteries - Made in the USA *For more details, please refer to the related link page or feel free to contact us.
Ergonomically designed hexagonal handle! Introducing high-quality probes made in the USA.
The "Probe (Stainless Steel, Arc Shape 133mm)" is a product made from conductive 300 series stainless steel that does not utilize magnetism. When placed on an ESD-protected work surface, it can ground all static electricity generated. It features an ergonomic hexagonal handle and is made of stainless steel, so it does not corrode. Additionally, it can be used together with magnetized parts without any issues. 【Features】 ■ Ergonomic hexagonal handle ■ Conductive 300 series stainless steel that does not utilize magnetism ■ Corrosion-resistant due to stainless steel construction ■ Can be used with magnetized parts without any problems ■ Can ground all static electricity generated when placed on an ESD-protected work surface *For more details, please refer to the related link page or feel free to contact us.
We also have a round conical type available! A probe with a frequency characteristic of 41.5GHz.
The "RI-028LA-03-A2" is a probe with excellent high-frequency characteristics. It has a frequency characteristic of 41.5GHz. Additionally, it can accommodate multiple materials for the plunger. We also offer the round conical type "RI-028IA-01-A2." 【Materials】 ■A Plunger: BeCu / Au-Plated ■Spring: SWP / Au-Plated ■B Plunger: BeCu / Au-Plated *For more details, please refer to the PDF document or feel free to contact us.
Conductivity tests for harnesses and the like are definitely at the FCC!
Fisher Custom Communications, Inc. (FCC) is a manufacturer of current probes and LISNs that apply and monitor current. The "Bulk Current Injection (BCI) Probe" is used in tests to evaluate noise immunity by applying current to cables and harnesses used in automobiles, electronic devices, and military products. Choosing products from this manufacturer allows for compatibility with various tests.
Analyzer for analyzing PROFIBUS communication, combined with an oscilloscope and master function.
"ProfiTrace2" is a powerful analyzer for PROFIBUS equipped with the latest bus monitoring technology. To manage a PROFIBUS system, one must understand the operational status of devices, the meaning of messages, and the installation status of hardware. ProfiTrace2 meets all these requirements and can be widely used for maintenance, troubleshooting, daily maintenance, engineering support for PROFIBUS systems, development of PROFIBUS devices, and even for system startup. 【Features】 ○ Retains the functions of ProfiTrace as an analyzer → Supports speeds up to 12Mbps → Equipped with automatic detection of PROFIBUS bus speed ○ Oscilloscope function → Time scale: 50nsec to 500msec → Voltage scale: 0.5 to 5V (per division), etc. For more details, please contact us or download the catalog.
