soft Product List and Ranking from 369 Manufacturers, Suppliers and Companies

MOTIWARE Analyzer (Motor and IO Operation Analysis Software)

Motor operation and IO operation analysis software with 1ms sampling that operates in the Windows real-time environment "MOSBench."

A software for analyzing motor operations, IO operations, DA operations, and AD operations with 1ms sampling that runs on the easy-to-use Windows real-time IO control environment "MOSBench." It features a 120,000-line ring buffer, and allows for saving and reading CSV files as well as displaying waveforms. Dynamic waveform display and analysis are possible during Windows real-time PTP movements and sequence operations in the "MOSBench" environment. It enables tracing the command position, current position, and IO in synchronization. Mechanical adjustments and bug analysis are made easier.

Company：プライムモーション
Price：Other

controller
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thermal Fluid Analysis Software FLOEFD for CATIA V5

"CATIA V5 Complete Integrated Thermal Fluid Analysis Software" achieves high operability and advanced analysis capabilities.

Simcenter FLOEFD for CATIA V5 is a thermal fluid analysis software fully integrated with CATIA V5. Its unique technology highly automates the complex setup of thermal fluid analysis, allowing general designers to easily perform thermal fluid analysis. It is a new software that changes the concept that thermal fluid analysis is difficult. At the same time, it also has advanced analysis features that meet the needs of dedicated analysts.

Company：構造計画研究所
Price：Other

Thermo-fluid analysis
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thermal Fluid Analysis Software Simcenter FLOEFD for NX

"Siemens NX fully integrated thermal fluid analysis software" achieves high operability and advanced analysis capabilities.

Simcenter FLOEFD for NX is a thermal fluid analysis software fully integrated with Siemens NX. Its unique technology highly automates the complex setup of thermal fluid analysis, allowing general designers to easily conduct thermal fluid analyses. It is a new software that changes the perception that thermal fluid analysis is difficult. At the same time, it also has advanced analysis capabilities that meet the needs of dedicated analysts.

Company：構造計画研究所
Price：Other

Thermo-fluid analysis
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thermal Fluid Analysis Software FLOEFD Standalone

Achieved high operability and advanced analysis capabilities.

We have highly automated the complex setup of thermal fluid analysis using our unique technology. General designers can easily conduct thermal fluid analysis. This is a new software that changes the concept that thermal fluid analysis is difficult. At the same time, it is equipped with advanced analysis capabilities that also meet the needs of dedicated analysts. It features 3D CAD modeling capabilities and can import various 3D CAD data such as Inventor and SolidEdge.

Company：構造計画研究所
Price：Other

Thermo-fluid analysis
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Case study of the thermal fluid analysis software "FloEFD for Creo"

Incorporate analysis into the design site to achieve a reduction in development time and control of development costs.

We would like to introduce a case study of the thermal fluid analysis software "FloEFD for Creo" from Seiko Epson Corporation. In the development of projectors, as the demand for high functionality and miniaturization increases, thermal management becomes a more challenging issue. With the acceleration of development speed, waiting for analysis from expert teams is no longer feasible, leading designers to implement "FloEFD for Creo" to conduct analyses themselves while progressing with their designs. **Reasons for Choosing "FloEFD for Creo":** - It is easy to use even for designers without simulation experience. - It is an integrated software with Pro/ENGINEER (CAD). - It has a rich library. Not only is it user-friendly for beginners, but even experienced users have expressed surprise, saying, "Oh, it can be done this easily." For more details, please contact us or download the catalog.

Company：構造計画研究所
Price：Other

Other embedded systems (software and hardware)
Thermo-fluid analysis
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

When it comes to structural analysis, Abaqus is the go-to. It predicts contact and crack propagation with high precision.

Integration of implicit and explicit methods. For elucidating a wide range of phenomena such as heat, electricity, magnetic fields, and fluids.

In nonlinear structural analysis, the three key nonlinearities are material, geometry, and boundary conditions. In recent design practices, there is a necessity to consider contact in assembly components using complex material models. Abaqus can accurately model not only classical metal material constitutive laws but also failure models due to rate dependence and polymers such as rubber and resin. Additionally, the innovative formulation of surface-to-surface contact achieves more robust convergence and higher analysis accuracy compared to other structural analysis tools. The general contact feature requires minimal user setup, significantly reducing the time needed to define contact in complex assemblies found in automobiles, aircraft, consumer electronics, and portable electronic devices.

Company：IDAJ
Price：Other

Structural Analysis
Stress Analysis
Other analyses
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Abaqus + α Solution "Fluid-Structure Interaction Analysis"

Achieve highly accurate fluid-structure interaction analysis! Easily implement complex formulation analysis settings!

IDAJ's "Fluid-Structure Interaction Analysis" achieves high-precision fluid-structure interaction analysis by using dedicated software specialized for both fluid and structure. There is a wealth of practical experience in the automotive, aerospace, maritime, energy, architecture, electrical, and chemical industries. The operations and settings necessary for data mapping and interaction analysis are organized in menus, making it easy to perform complex interaction analysis setups. 【Features】 ■ More realistic CAE through coupled analysis with Abaqus and STAR-CCM+ ■ Contributes to modeling considering multi-physics ■ Import and export functions in Abaqus format ■ One-way coupling function using data mapper ■ Unsteady bidirectional coupling function through direct co-simulation *For more details, please refer to the PDF materials or feel free to contact us.

Company：IDAJ
Price：Other

Structural Analysis
Thermo-fluid analysis
Analysis Services
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

GT-SUITE Features: Engine Cooling

Achieving predictive and non-stationary analysis! Introducing the thermal distribution through engine structure.

"GT-SUITE" is an analysis tool for modeling the distribution of heat from the combustion chamber to the coolant, oil, and surrounding environment through engine structures. With its unique features, it predicts heat dissipation to water and oil, accommodating both steady-state and transient analyses. When modeling internal structures, it is easy to use its proprietary parametric FE cylinder model. Heat from the engine is transmitted from the FE model to the coolant and oil circuits, as well as to the "external" structures of the block and head simultaneously. The circuits and thermal mass of these flows can be easily generated from CAD data using a 3D pre-processing tool. 【Features】 ■ Model individual components of the A/C system or the entire system ■ Spatially analyze condenser models and evaporator models in detail ■ Automatic calibration of all heat exchangers ■ Support for single and multi-volume cabin models ■ REFPROP properties for single and mixed refrigerants *For more details, please refer to the PDF materials or feel free to contact us.

Company：IDAJ
Price：Other

Mechanism Analysis
Other analyses
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[FloTHERM Case Study] Coupled Analysis with α Solution

FloTHERM + α solution! Coupled analysis such as "thermal fluid-structure" is now possible!

"FloTHERM" is a design support tool specifically for electronic devices. By utilizing the FloTHERM + α solution, you can perform "multiphysics analysis" and "multidomain analysis." Our company responds to customer requests through software provision and consulting. [Case Studies] ■ Multiphysics Analysis (Coupling of Different Physical Phenomena) ◎ Thermal Fluid - Structure - High-precision prediction of displacement and temperature within electronic device enclosures ◎ Thermal Fluid - Electromagnetic Field - Loss distribution data analyzed with electromagnetic field analysis software is transferred to FloTHERM via a data mapping tool. *For more details, please refer to the PDF materials or feel free to contact us.

Company：IDAJ
Price：Other

Development support tools (ICE, emulators, debuggers, etc.)
simulator
Other analyses
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Reduction of molding defects and improvement of mold life through the introduction of CAE technology.

Improving molding efficiency by maintaining and managing the mold at the appropriate temperature and reducing solidification time!

We propose "reducing molding defects and improving mold lifespan through the introduction of CAE technology." It is possible to transfer technology after you have implemented the software, and if you provide input data, we can offer consulting services that output data on thermal deformation due to differences in linear expansion rates of individual components that make up the mold, external forces (clamping force), contact and friction between components, and creep predictions on the product side. We have included a case study where mold warpage was reduced by 29%. [Proposal Overview] ■ To further improve the accuracy of mold temperature predictions and product molding predictions, we propose fluid analysis (CFD) and optimization technologies. <Proposal 1> - Utilizing the open-source-based general-purpose CFD software "iconCFD" to achieve large-scale calculations at low cost. <Proposal 2> - Utilizing the world-class leading tool for general fluid analysis "ANSYS Fluent." *For more details, please refer to the PDF document or feel free to contact us.

Company：IDAJ
Price：Other

Development support tools (ICE, emulators, debuggers, etc.)
simulator
Other analyses
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Cost Reduction and Performance Improvement of Hydraulic Control Equipment

Introduce "ANSYS Fluent" to reduce costs and improve performance of hydraulic control equipment!

We would like to introduce a case where Rinsyo Industry utilized 'ANSYS Fluent' for cost reduction and performance improvement of hydraulic control equipment. The in-house flow calculation tool that had been used until now did not provide sufficient accuracy and was only used to confirm trends. However, with 'ANSYS Fluent', a good accuracy of -1.4% has been achieved, and it is expected to be applicable to future analysis cases. Additionally, the number of prototypes has decreased, and there is no longer a need to wait for prototypes to be completed, which has contributed to a more efficient reduction in overall development costs. 【Features】 ■ Reduction in the number of prototypes and man-hours, and also used to avoid worst-case scenarios ■ Achieved good simulation accuracy of -1.4% ■ Can be used to identify and avoid anticipated worst-case scenarios by combining upper and lower limits of design tolerances ■ Now able to quantitatively confirm how much the design range falls within the required range *For more details, please refer to the PDF document or feel free to contact us.

Company：IDAJ
Price：Other

Other analyses
simulator
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Software "Aras Innovator"

Open, flexible, and rich in scalability! Enterprise MBD platform.

"Aras Innovator" is an enterprise MBD (Model Based Development) platform that is open, highly flexible, and scalable. We provide lifecycle management features focused on business processes across the entire product lifecycle, including project management, design, quality, and production, as preset applications. This product can coexist with other PLM tools through integration interfaces. It is also easy to customize, and full support is provided for version upgrades. This leads to improvements in the development process through accelerated PLM. 【Features】 ■ Coexistence with existing PLM tools is possible ■ Easy customization for adding, changing, or deleting functions ■ Flexibly modify the system to match your company's business flow ■ Complete guarantee of operation for version upgrades, including individually customized functions *For more details, please refer to the PDF materials or feel free to contact us.

Company：IDAJ
Price：Other

project management
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Software "Industry-Specific Package"

Introducing the Ansys SCADE package for the automotive industry, aerospace industry, and defense industry.

Ansys SCADE not only complies with safety standards applicable in various industries (ISO26262, DO-178C), but also offers 'industry-specific packages' that cater to the standardization of specific industries. By using these packages, it becomes possible to design systems and develop embedded control software that comply with safety standards and standardization. 【Product Lineup】 ■ Package for the automotive industry: AUTOSAR ■ Package for the aerospace industry: IMA, ARINC ■ Package for the defense industry: FACE *For more details, please refer to the PDF materials or feel free to contact us.

Company：IDAJ
Price：Other

Other embedded systems (software and hardware)
Development support tools (ICE, emulators, debuggers, etc.)
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Software SpiderWareM3

Platform Management Software

Control and management of the platform are essential for the efficient and effective use of data and communication networks. By running the platform with SpiderWareM3, from output control to fault management, we aim to reduce OpEx costs and minimize downtime, maximizing workforce utilization. For more details, please contact us.

Company：エルエッチエス
Price：Other

Other embedded systems (software and hardware)
soft

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Partial Discharge Analysis Software

Capable of acquiring up to 18,000 charges per second at 50Hz! Introduction to partial discharge analysis software.

We would like to introduce our "Partial Discharge Analysis Software." It captures data to the PC while communicating in real-time with the DAC-PD-9. It can measure the charge amount for each phase and can acquire up to 18,000 charge amounts per second at 50Hz. In wideband measurements, it automatically discriminates the polarity of the discharge waveform and displays the occurrence count for both positive and negative discharges. Two-dimensional and three-dimensional graphs can be created from the saved data, which can be utilized as partial discharge analysis data. 【Features】 ■ Can measure the charge amount for each phase ■ Can acquire up to 18,000 charge amounts per second at 50Hz ■ Two-dimensional and three-dimensional graphs can be created from saved data, usable as partial discharge analysis data ■ By selecting V-Q mode, it automatically captures the maximum partial discharge charge amount corresponding to the rise and fall of the test voltage, allowing for the measurement of voltage-charge characteristics *For more details, please refer to the PDF document or feel free to contact us.

Company：総研電気
Price：Other

Software (middle, driver, security, etc.)
Other embedded systems (software and hardware)
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Software "Bluehill HV"

Customize test results and reports according to user preferences! Software for HDT and Vicat testing.

"Bluehill HV" is a new software for the Instron "HV Series." It serves as a replacement for the VisualTHERM software used with the old generation CEAST HDT Vicat system, built to fully understand and meet customer needs regarding the accumulation of user know-how and productivity improvement. It enables material testing to be conducted "more simply, more smartly, and more safely." 【Features】 ■ Quick test setup ■ Intuitive and easy operation ■ Output of test results and reports ■ Compliance with ISO and ASTM testing methods ■ Accurate default settings for parameters to avoid incorrect data entry ■ Presentation of acceptance criteria to recognize pass/fail test results *For more details, please refer to the PDF materials or feel free to contact us.

Company：インストロンジャパンカンパニイリミテッド日本支社
Price：Other

Software (middle, driver, security, etc.)
Other CAM related software
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Predicting Defects in Press Forming and Sheet Forging Using CAE Applications

We will introduce examples of utilizing CAE that can simulate everything from defect prediction to mold load in metal processing such as press forming and plate forging!

"DEFORM" is a CAE software that can analyze various changes caused by processing in metalworking, such as the flow of metal materials and the stress state of molds during forging, cutting, and heat treatment. "Is it possible to process within the capacity of the existing press?" "Will the mold break?" "Is the desired shape achieved? Are there any unfilled areas?" "Will the forged product crack?" By predicting issues that may occur during processing in advance, it reduces the number of prototype work hours and costs. We have prepared a collection of analysis case studies for "press forming and sheet forging," so please feel free to contact us if you are interested. [Contents of the Press Forming and Sheet Forging Analysis Case Study Collection] ◎ Overview of CAE software "DEFORM" ◎ Case Study 1: Sheet Forging ◎ Case Study 2: Fracture Analysis (2D Analysis) ◎ Case Study 3: Press Forming Punching Process ◎ Case Study 4: Press Forming Burring Process ◎ Case Study 5: Press Forming Bending Process

Company：ヤマナカゴーキン
Price：Other

Other analyses
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Casting mold analysis software "GEO-DESIGNER"

Significant reduction of design and processing lead time in advance through simple and speedy analysis.

"GEO-DESIGNER" is a powerful Design for Manufacturing (DFM) tool. It has a significant effect on enhancing productivity in the design process and reducing costs in the manufacturing process. By quickly conducting evaluation analyses in the early stages, it greatly reduces design changes and rework during manufacturing, while also serving as a sales tool that allows for rapid identification of risks and optimal proposals and estimates.

Company：システムクリエイト
Price：Other

simulator
Other analyses
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Vascular blood flow imaging analysis software "Capimetrics"

It is possible to measure the blood flow velocity and diameter of capillaries! There are numerous papers on the software.

● The analysis software Capimetrics is made in the UK and is customized under a licensing agreement for the European medical device software (for TOKU Capillaro). ● It has an overwhelming track record in blood flow analysis and evaluation at research institutions. 'Capimetrics' is a vascular blood flow image analysis software that can analyze recorded AVI format videos. In Europe, it is a software that has been customized to fit the blood flow scope 'TOKU Capillaro', which is a medical device in conjunction with a scope. It is equipped with an automatic movement correction function that can handle slight blurring, allowing for the measurement of flow velocity using two different principles and the measurement of vascular diameter. In addition to this software, we offer a "research set" that includes the main unit of 'TOKU Capillaro', a dedicated stand, a laptop, attachments, extension cables, and more. 【Features】 ■ Analysis can be performed from recorded AVI format videos. ■ Equipped with an automatic movement correction function that can handle slight blurring. ■ Capable of measuring flow velocity using two different principles. *For more details, please refer to the PDF document or feel free to contact us.

Company：徳 NPO法人毛細血管・研究会
Price：Other

Image analysis software
Analytical Equipment and Devices
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Image-based structural analysis software "VOXELCON"

Easy modeling of any shape! 3D editing, analysis, measurement, and material property calculation of CT images based on images.

"VOXELCON" is a powerful image-based structural analysis software that directly models and utilizes CT images obtained from physical objects and STL data from CAD for analysis and measurement. It is equipped with a variety of reverse engineering functions as structural analysis and measurement capabilities. It is effective in various scenarios, from cast products to composite materials, and from the design stage to quality control. Additionally, voxel segmentation is ultra-fast, capable of creating a mesh of 100 million voxels in just a few seconds, and is extremely robust, with very few failures. 【Features】 ■ Direct use of physical data ■ Various reverse engineering functions ■ Ultra-fast and robust voxel segmentation ■ Large-scale solver included ■ Cutting-edge multi-scale analysis *For more details, please refer to the related links or feel free to contact us.

Company：くいんと
Price：Other

Structural Analysis
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Example] Shape optimization of table legs considering meat thickness.

Lightweight design considering the generated stress and the thickness of the member. Here is an example of applying shape optimization to the table leg.

Here, we will perform shape optimization on the table legs, minimizing the volume while ensuring that the Mises stress does not exceed a specified value. In shape optimization, we can optimize based on Mises stress or maximum principal stress. Additionally, by applying symmetry conditions, we will conduct the analysis using a quarter model of the entire structure. *For more details, please refer to the related links or feel free to contact us.*

Company：くいんと
Price：Other

Structural Analysis
Other analyses
Contract Analysis
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Analysis of Complex Shape Models - Reducing Labor Costs -

"VOXELCON" is a structural analysis software that directly models STL data from CT and CAD for analysis and measurement purposes.

When creating an analysis model by meshing a detailed CAD model created as design data, the following issues can be noted: - The number of elements becomes enormous, leading to high computational costs. - Meshing is difficult and requires the expertise and techniques of experienced individuals. Additionally, the analysis results depend on the meshing. - In some cases, automatic element meshing is not possible. However, even if you try to analyze using a simplified shape... - The effort required for simplification is significant. - Evaluating the impact of simplification on analysis accuracy is cumbersome. These issues can be resolved by VOXELCON's voxel mesh generation technology. Even complex shapes can be easily converted into analysis models, thereby reducing the human labor required for analysis. *For more details, please refer to the related links or feel free to contact us.*

Company：くいんと
Price：Other

Structural Analysis
Other analyses
Contract Analysis
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Shape Optimization for Equalizing Reaction Forces ★ Detailed Materials Available

Consider "reaction force" as a manufacturing requirement! Reduce the reaction force values at points with high fixed-point reaction forces!

We will perform non-parametric shape optimization to ensure that the reaction forces at the bolted fixed points are equal, and we will introduce a case that reduces the reaction force values at locations with high fixed point reaction forces. The analysis model completely fixes four bolted points and sets a load of 1,000N in the Z-axis direction. In the evaluation of the initial shape, the reaction force value at the lower left part was the highest, reaching 415.1N. 【Case Overview】 ■Optimization Conditions - Objective Function: Volume Minimization - Constraints: Reaction force of 250N in the Z-axis direction at each fixed point, 3.0 times the compliance of the initial shape - Shape Variation Restrictions (constraints related to manufacturing requirements): Minimum thickness, maintaining the plane of the Z component on one side For further details, please refer to the PDF document or feel free to contact us.

Company：くいんと
Price：Other

Structural Analysis
Contract Analysis
simulator
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Example] Shape optimization considering stress

Using "OPTISHAPE-TS"! Introducing optimization cases with different stress constraints based on model parts.

In strength design, stress serves as an important guideline. When conducting strength assessments based on stress, it is necessary to vary the evaluation stress values according to different parts, rather than relying solely on the maximum value. In such cases, by specifying constraint stress values for each region, it is possible to obtain an optimal shape that constrains stress at multiple evaluation points and all locations. This time, we will introduce an optimization case with different stress constraints applied to various parts of the model. [Contents] ■ Overview ■ Analysis Model ■ Optimization Conditions ■ Results ■ Discussion *Detailed information about the case can be viewed through the related links. For more details, please feel free to contact us.

Company：くいんと
Price：Other

Structural Analysis
Contract Analysis
Stress Analysis
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Accuracy Verification of Displacement and Temperature Using Finite Covering Method (FCM)

I will introduce the issues of voxel analysis and a case study applying FCM as a solution!

The displacement solution of static stress analysis or the temperature solution of steady-state heat conduction analysis rarely produces errors as long as the shape is represented accurately; however, there are problems where the errors can become significant. When the original shape does not match the voxel pitch, discrepancies in the shape occur. Therefore, to achieve better accuracy in the analysis, it is necessary to refine the mesh, which increases the model size. Here, we will introduce a case study applying FCM as a solution to this issue. [Contents] ■ Overview - Issues with voxel analysis ■ Analysis Model - Boundary conditions ■ Analysis Results - Static stress analysis / Steady-state heat conduction analysis *Detailed information about the case study can be viewed through the related links. For more details, please feel free to contact us.

Company：くいんと
Price：Other

Structural Analysis
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Example: Injection Molding - Reducing clamping force to downsize the molding machine.

We will collaborate with 3D TIMON to explore gate positions that can be injected even with small molding machines, thereby reducing production costs.

Optimizing molding conditions parametrically in resin flow analysis can be relatively easily achieved, but automatically changing the cavity shape and runner layout while optimizing is challenging. To facilitate these optimizations, we developed "AMDESS for 3D TIMON" in collaboration with Toray Engineering Co., Ltd. Here, we present a case study of optimizing the gate position to minimize clamping force while automatically re-modeling the runner when changing the gate position. [Contents] ■ Overview ■ Analysis Model ■ Optimization Conditions ■ Results ■ Discussion *Detailed information about the case study can be viewed through the related links. For more information, please feel free to contact us.

Company：くいんと
Price：Other

Structural Analysis
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Technical Column] The Theory of OPTISHAPE-TS: "Waving Phenomenon"

The Difficulty of Nonparametric Optimization! Introduction to a Technical Column

In the previous discussion, I explained that the checkerboard phenomenon is a challenging issue in topology optimization. I also discussed the technique of filtering as a workaround, but highlighted the difficulty in finding the right balance. A completely different approach has been proposed to avoid the checkerboard pattern without modifying the optimization problem. The idea is to have design variables at the nodes rather than at the elements, and to interpolate within the elements using a C^0 continuous function. Please feel free to download and take a look. [Contents] ■ Episode 5: The Difficulty of Non-Parametric Optimization Part 4 "Wavy Phenomenon" *For more details, please refer to the PDF document or feel free to contact us.

Company：くいんと
Price：Other

Structural Analysis
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Column] The Theory of OPTISHAPE-TS: Checkerboard Phenomenon

I will explain the difficulties of non-parametric optimization from another perspective!

In the previous sections, we explained that in non-parametric optimization, the number of design variables to be determined is large, meaning that the dimensionality of the space to be explored is high, which is why optimization algorithms using sensitivity are employed. In this article, we will further explain the difficulties of non-parametric optimization from another perspective. Please feel free to download and take a look. [Contents] ■ Episode 4: The Difficulty of Non-Parametric Optimization Part 3 "Checkerboard Phenomenon" *For more details, please refer to the PDF document or feel free to contact us.

Company：くいんと
Price：Other

Structural Analysis
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

soft Product List and Ranking from 369 Manufacturers, Suppliers and Companies | IPROS GMS

soft Manufacturer, Suppliers and Company Rankings

soft Product ranking