soft Product List and Ranking from 366 Manufacturers, Suppliers and Companies

Fluid analysis software for gear pumps, 'Simerics MP+'.

Simulate the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Particularly, we encourage you to see the actual mesh creation and movement through a demo presentation!

Company：ウェーブフロント本社
Price：5 million yen-10 million yen

Thermo-fluid analysis
Contract Analysis
simulator
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Magnetron Sputtering Analysis Software 'Particle-PLUS'

"Particle-PLUS" is a plasma and rarefied fluid analysis software that specializes in magnetron sputtering devices using the particle method.

"Particle-PLUS" is a simulation software suitable for the research, development, and manufacturing of devices and materials using plasma. - It specializes in low-pressure plasma analysis. - It can perform advanced physical model analysis such as CCP and external circuit models. - It excels in plasma simulation for low-pressure gases, where calculations using fluid models are challenging. - It supports both 2D and 3D, allowing for efficient analysis even with complex models. - As a strength of our in-house developed software, it can perform CCP and magnetron sputtering calculations with standard features, and customization to fit customer devices is also possible. ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitively coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us.

Company：ウェーブフロント本社
Price：Other

Other analyses
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

The relationship between failure rate and reliability information

Introducing the relationship between failure rate and reliability, failure probability density, and unreliability!

This document introduces the relationship between failure rate, reliability, unreliability, and failure probability density, among other reliability information. There is a close relationship between reliability, unreliability, failure probability density, and failure rate (which can be viewed from different perspectives as needed); knowing one allows you to understand the other metrics. When managing failures using CMMS/EAM, it is possible to aggregate the number of failures over time. If the number of failures over time is known, the time dependence of failure rate, reliability, and unreliability can be understood. Weibull analysis is a method of failure analysis that leverages this characteristic. [Contents] - The relationship between failure rate, reliability, failure probability density, and unreliability - Detailed explanation of the diagrams - Summary *For more details, please refer to the PDF document or feel free to contact us.

Company：ウェーブフロント本社
Price：Other

Other electronic parts
others
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Presentation of Case Study Collection: Recommended CAD/CAE Related Solutions

There is a proven record of reducing the model creation time from 1 month to 1 day! A CAD/CAE-related solution that is simple, convenient, easy to use, and also leads to cost reduction!

【Simerics MP for SOLIDWORKS】 Easily perform thermal fluid analysis on SolidWorks! With a built-in wizard, even beginners can easily conduct analyses! 【Simerics MP】 Simerics MP is a thermal fluid analysis software characterized by low cost, fast analysis, and easy, clean mesh generation! It has been gaining traction overseas, particularly among automotive-related companies, and is highly regarded in the academic field. 【Simerics MP+(PumpLinx)】 This is an advanced fluid analysis software that adds features for easily creating meshes for volumetric pumps and compressors, as well as the ability to analyze valves. It excels in analyses that other fluid analysis software may struggle with! 【CFturbo】 In addition to integration with the aforementioned Simerics products, there are numerous integration achievements with other well-known fluid analysis software! It is an essential software for the design and development of turbomachinery!

Company：ウェーブフロント本社
Price：Other

Other CAD
Thermo-fluid analysis
Contract Analysis
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Screw compressor gauge 'SCORG'

SCORG is a measurement software for the design and analysis of screw compressors, expanders, pumps, and motors.

Our strength lies in the ability to generate meshes for various computational fluid dynamics (CFD) software. For example, we can integrate with most commercial CFD solvers such as Simerics MP, Ansys CFX, and STAR-CCM+, as well as engineering software. We can create complex meshes for screw compressors without being limited by the solver. By using SCORG solely for the creation of complex meshes like those for two-axis screw pumps and compressors while still utilizing your familiar solver, you can significantly reduce the cumbersome effort involved in analysis. Additionally, you can conduct simulations leveraging existing know-how without having to learn a new solver, which greatly reduces both effort and costs compared to switching solvers. We also have a case study on fluid analysis (CFD) of a two-axis screw compressor that we presented at the Japan Society of Refrigerating and Air Conditioning Engineers. Please contact us for more details.

Company：ウェーブフロント本社
Price：1 million yen-5 million yen

simulator
Thermo-fluid analysis
Contract Analysis
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluid analysis software for valves, 'Simerics MP+'

Simulate the flow characteristics of valves and volumetric pumps! A CFD software specialized in valves and pumps, which other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various valves, pumps, and compressors. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! In addition to valve analysis, there has been an increase in achievements with oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, please see the demo for actual mesh creation and movement!!

Company：ウェーブフロント本社
Price：5 million yen-10 million yen

Thermo-fluid analysis
Contract Analysis
simulator
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

General-purpose thermal fluid analysis software 'Simerics MP+'

It is possible to perform everything from mesh generation to analysis and post-processing in the same environment!

Simerics MP+ is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples including vane pumps for power steering and CVTs, as well as trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see a demo for the actual mesh creation and movement!!

Company：ウェーブフロント本社
Price：Other

Thermo-fluid analysis
Contract Analysis
simulator
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Report on the Cycle Life Prediction of Li-ion Rechargeable Batteries

Introducing a cycle life prediction using a tool that enables the visualization of workflows!

This document reports on the prediction of the cycle life of Li-ion batteries using machine learning with Pipeline Pilot. We will introduce the sections: "Background," "Flow," "Results," and "Discussion." Pipeline Pilot is a tool that enables large-scale data processing and analysis, automation of tasks, and visualization of workflows. 【Contents】 ■ Background: (1) Li-ion batteries and their cycle life prediction, (2) What is machine learning ■ Flow: (1) Machine learning in Pipeline Pilot ■ Results: (1) A part of the Pipeline Pilot operation screen, (2) Output screen (3) Comparison of output screens ■ Discussion *For more details, please refer to the PDF document or feel free to contact us.

Company：ウェーブフロント本社
Price：Other

Contract Analysis
simulator
Other analyses
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Example] Particle-PLUS Opposing Target Sputtering

Introduction of analysis examples using "Particle-PLUS": "Opposing Target Sputtering"

"Particle-PLUS" is a simulation software suitable for the research, development, and manufacturing of devices and materials using plasma. - It specializes in low-pressure plasma analysis. - By combining axisymmetric models with mirror-symmetric boundary conditions, it can quickly obtain results without the need for full device simulations. - It excels in plasma simulations for low-pressure gases, where calculations with fluid models are challenging. - It supports both 2D and 3D, allowing for efficient analysis of complex models. - As a strength of our in-house developed software, customization to fit the customer's device is also possible. ◆ Supports various applications ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitively coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us.

Company：ウェーブフロント本社
Price：Other

Other analyses
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Example] "Particle-PLUS" Counter Target Type Sputtering

Introduction of Particle-PLUS Analysis Case: "Simulation Case of Al Thin Film Fabrication Using Face-to-Face Target"

"Particle-PLUS" is a simulation software suitable for research, development, and manufacturing of devices and materials using plasma. - It specializes in low-pressure plasma analysis. - By combining axisymmetric models with mirror-symmetric boundary conditions, it can quickly obtain results without the need for simulations of the entire device. - It excels in plasma simulations for low-pressure gases, where calculations using fluid models are challenging. - It supports both 2D and 3D, allowing for efficient analysis of complex models. - As a strength of our in-house developed software, customization to fit the customer's device is also possible. ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitively coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Electron and ion density distribution/temperature distribution/generation distribution - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Neutral gas density distribution/temperature distribution/velocity distribution, etc. *For more details, please feel free to contact us.

Company：ウェーブフロント本社
Price：Other

Other analyses
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Example] Mass analysis of the "Particle-PLUS" ion beam.

Introduction to Particle-PLUS Analysis Case: "Ion Beam Mass Analysis and Electrostatic Acceleration" Simulation Case

"Particle-PLUS" is a simulation software suitable for research, development, and manufacturing of devices and materials using plasma. - It excels in low-pressure plasma analysis. - By combining axisymmetric models and mirror-symmetric boundary conditions, it can quickly obtain results without the need for full device simulations. - It specializes in plasma simulations in low-pressure gases, where calculations with fluid models are challenging. - It supports 2D (two-dimensional) and 3D (three-dimensional) analyses, allowing efficient analysis of complex models. - As a strength of our in-house developed software, customization to fit the customer's equipment is also possible. ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitively coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us.

Company：ウェーブフロント本社
Price：Other

Other analyses
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

AI 'Neural Designer' that anyone can easily use right now.

We have the data but lack the knowledge, or we have no knowledge but want to try using it—this is perfect for such companies!

■I have data thrown into Excel and other tools, but I don't know how to utilize it. ■I have no knowledge, but I want to experience what data analysis is like at least once. ■I want to see what kind of future predictions can be made from past data. 'Neural Designer' will solve and realize these concerns and requests! Easily with 'Neural Designer'! Start using AI right away from today! Even without the hassle of programming or knowledge of Python, TensorFlow, or PyTorch, you can immediately master AI, machine learning, deep learning, and deep learning! Of course, it is also recommended for those who are already working with AI, machine learning, deep learning, and deep learning. Especially for those who are programming to support their main business, why not free yourself from that tedious programming and focus on your core work?

Company：ウェーブフロント本社
Price：Other

Business Intelligence and Data Analysis
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Prediction of Failure Timing Using Vibration Data

Use the data at hand for failure prediction and quality improvement!

"Prediction of Failure Timing Using Vibration Data" is our company's data mining and consulting service. In vibration data analysis, several implementation methods can be assumed based on the monitoring methods and the data you have. This document clearly introduces the prediction methods using vibration data and user case studies. *For more details, please refer to the catalog or feel free to contact us.*

Company：ウェーブフロント本社
Price：Other

Contract Analysis
Other contract services
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Example] "Particle-PLUS" RF Magnetron Sputtering

Introduction to Particle-PLUS Analysis Case: "RF Magnetron Sputtering Analysis" Simulation Example

This is an analysis case of RF magnetron sputtering, which is one of the film deposition methods using process plasma. Particle-PLUS specializes in plasma analysis within vacuum chambers and can quickly simulate deposition rates and other parameters. ◇ Features of 'Particle-PLUS' - Excels in low-pressure plasma analysis. - By combining axisymmetric models with mirror-symmetric boundary conditions, results can be obtained quickly without the need for full device simulations. - Specializes in plasma simulations for low-pressure gases, where fluid modeling is challenging. - Supports 2D (two-dimensional) and 3D (three-dimensional) analyses, efficiently handling complex models. - As a strength of our in-house developed software, customization to fit customer devices is also possible. ◆ Various calculation results can be output ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the walls - Energy spectrum of electrons and ions at the walls - Density distribution/temperature distribution/velocity distribution of neutral gas and more. *For more details, please feel free to contact us.

Company：ウェーブフロント本社
Price：Other

Other analyses
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Example] Particle-PLUS: RF Magnetron for Dielectric Targets

Introduction of Particle-PLUS Analysis Case: "RF Magnetron Sputtering Analysis of Dielectric Target" Simulation Case

This is an analysis case of RF magnetron sputtering, which is one of the film deposition methods using process plasma. Particle-PLUS specializes in plasma analysis within vacuum chambers and can quickly simulate deposition rates and other parameters. ◇ Features of 'Particle-PLUS' - Excels in low-pressure plasma analysis. - By combining axisymmetric models with mirror-symmetric boundary conditions, it can obtain results quickly without the need for full device simulations. - Specializes in plasma simulations in low-pressure gases, where fluid modeling is challenging. - Supports 2D (two-dimensional) and 3D (three-dimensional) analyses, efficiently handling complex models. - As a strength of our in-house developed software, customization to fit customer equipment is also possible. ◆ Various calculation results can be output ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the walls - Energy spectrum of electrons and ions at the walls - Density distribution/temperature distribution/velocity distribution of neutral gas and more. *Please feel free to contact us for more details.

Company：ウェーブフロント本社
Price：Other

Other analyses
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Machine Learning Example at a Coating Material Manufacturer

Introducing case studies of machine learning using "Pipeline Pilot"【Case Studies】

This time, the goal was to grasp the trends of optimal experimental conditions by predicting characteristic values. <Background> From traditional to modern times, developing materials with better characteristic values is an important task across all fields and remains a significant challenge. Additionally, since the characteristic values of materials can be influenced by various factors, there is a demand for increased efficiency in material development. For instance, factors such as the materials used during development, reaction time, temperature, and hysteresis may also affect the results. While it is ideal to introduce experimental design methods for all these conditions and discover optimal conditions through actual experiments and measurements, this is not realistic from a cost and time perspective. Therefore, we conducted machine learning using a small dataset that recorded several experimental conditions (for example, explanatory variables X1, X2, X3, X4, ...) and their respective characteristic values (for example, objective variables Y1, Y2). In this case, we were able to easily perform machine learning to create a model and improve prediction accuracy. *For more details, please contact us.*

Company：ウェーブフロント本社
Price：Other

simulator
Document and Data Management
Business Intelligence and Data Analysis
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Software "Light Manager 120"

Control up to 120 lights! Introducing software for custom cycle timers!

"Light Manager120" is software that controls the arbitrary cycle timer LCT. It can control up to 120 lights, and it is also possible to control the lights individually. By installing an optional illuminance sensor, it can detect disconnections or deterioration of lighting fixtures. 【Features】 ■ Controls the arbitrary cycle timer LCT ■ Can control up to 120 lights ■ Individual control of lights is also possible ■ By installing an optional illuminance sensor, it can detect disconnections or deterioration of lighting fixtures *For more details, please refer to the PDF document or feel free to contact us.

Company：メルクエスト
Price：Other

Software (middle, driver, security, etc.)
Other embedded systems (software and hardware)
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thermal Fluid Analysis Software FlowDesigner Inverse Analysis Function

The world's first thermal fluid analysis tool that exceeds the limits of trial and error.

In general thermal fluid analysis software, designers only input their proposed designs to simulate airflow and temperature distribution. Therefore, if the initial design conditions do not achieve the desired design target, the designer must repeatedly reconsider the improvement conditions themselves. To find improvement proposals that can meet the design goals, it is necessary to conduct a vast number of analyses. How can one find a design proposal that achieves the design goals within a limited design review period? The inverse analysis function of FlowDesigner is the only simulation software that provides the answer.

Company：アドバンスドナレッジ研究所
Price：Other

Thermo-fluid analysis
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

This is how to use it! Inverse analysis in thermal design - Examination of heat sink shapes -

Visualizing improvement points with thermal conductivity sensitivity.

Are you repeatedly struggling with trial and error in thermal design? ~Introducing the "Inverse Analysis Function" of FlowDesigner!~ In traditional thermal design, we have derived answers through trial and error to meet design goals. There have also been times when we couldn't immediately achieve the design objectives and were forced to compromise. By using the "Inverse Analysis" function of the thermal fluid analysis software FlowDesigner, you can visualize various improvement proposals as "sensitivity" with just two analyses: "current proposal analysis" and "sensitivity analysis." This not only shortens the time spent on trial and error in thermal design but may also lead to solutions that you had never imagined before.

Company：アドバンスドナレッジ研究所
Price：Other

Thermo-fluid analysis
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

BIM airflow analysis software FlowDesigner for architects.

Quickly visualize wind flow and temperature distribution! Useful for examining design and construction proposals, as well as for client proposal materials.

FlowDesigner is a purely domestic software developed with the desire to make it more accessible and easier to use not only for researchers with expertise in thermal fluid simulation but also for general designers. We believe that the essence of simulation lies in the ability to "test any idea immediately and as many times as needed." We think that this ease of use makes front-loading in design feasible. FlowDesigner will continue to evolve daily based on the following three key features to realize the simulation software we envision. ◆ It has been designated as a software eligible for subsidies under the Ministry of Land, Infrastructure, Transport and Tourism's "Building BIM Acceleration Project."

Company：アドバンスドナレッジ研究所
Price：Other

others
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Optimize heat sink placement with reverse analysis in FlowDesigner!

What can be done to "streamline" the consideration of the optimal layout plan?

Are you repeatedly struggling with trial and error in thermal design? ~Introducing the case of FlowDesigner’s "Inverse Analysis" feature!~ In traditional thermal design, we have derived answers through trial and error to meet design goals. There have also been times when we couldn't immediately achieve the design goals and were forced to settle for compromises. By using the "Inverse Analysis" feature of the thermal fluid analysis software FlowDesigner, you can visualize various improvement proposals as "sensitivity" with just two analyses: "current proposal analysis" and "sensitivity analysis." This not only shortens the time spent on trial and error in thermal design but may also lead to solutions that you had never imagined before.

Company：アドバンスドナレッジ研究所
Price：Other

Thermo-fluid analysis
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thermal Fluid Analysis Software 'FlowDesigner'

Introducing the "inverse analysis" feature that visualizes improvements in thermal design with just two analyses.

In thermal design, where long hours of trial and error are used to derive answers, there are times when one cannot meet design goals and is forced to compromise. With the "inverse analysis" feature of the thermal fluid analysis software 'FlowDesigner', it is possible to visualize various improvement proposals as "sensitivity" with just two analyses. This can be expected to shorten the time spent on trial and error and lead to the discovery of improvement proposals. 【Features】 ■ Visualization of improvement proposals for airflow, position, thermal conductivity, etc., through analysis of the current plan and sensitivity analysis ■ Utilizing inverse analysis for design ideas can significantly improve design efficiency ■ Easy operation with an intuitive interface ■ Excellent stability and analysis speed ■ Support available after implementation ★ A free trial version of this software is currently available. Please feel free to contact us if you are interested. * For more details about the product, please download the PDF document.

Company：アドバンスドナレッジ研究所
Price：Other

Thermo-fluid analysis
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thermal Fluid Analysis Software 'FlowDesigner' <Inverse Analysis Function>

You can instantly see where the problem lies! You are asked to identify "where the conditions that need improvement are" in a "reverse" manner.

"FlowDesigner" is a thermal fluid analysis software that boasts exceptional stability and overwhelming speed, allowing for easy operation with an intuitive interface. The product's "inverse analysis function" provides answers on how to achieve design goals within a limited design review period. By inputting the desired design target values, you can "reverse" the inquiry to determine "where improvements should be made" from the initial design proposal. 【Features of the Inverse Analysis Function】 ■ Identify improvement points with just two simulations 　・Step 1: Conduct analysis of the initial design proposal 　・Step 2: Set design target points and target values ■ Understand suitable improvement methods from the sensitivity map ■ Estimate internal heat generation of equipment through inverse analysis *For more details, please refer to the PDF document or feel free to contact us.

Company：アドバンスドナレッジ研究所
Price：Other

Thermo-fluid analysis
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Inverse Analysis: Automatically Achieving Target Design Temperature!? [Electronic Devices / Control Systems]

Free trial application now open!

FlowDesigner Inverse Analysis - Optimization of Flow Rate by Changing Opening Ratio - As a forced air cooling method, how should the opening ratio of the opening ratio panel be designed to achieve a wind speed target of 8 m/s at the target? The inverse analysis function of FlowDesigner allows you to input the desired design target value and determine "in reverse" where improvements should be made from the initial design proposal. In this video, we further utilize the automation feature to "automatically" derive the opening ratio (shape of the opening) that achieves the design target!

Company：アドバンスドナレッジ研究所
Price：Other

Thermo-fluid analysis
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Visualizing the environmental improvement effects of factories through thermal fluid simulation!

Analyze the situation before incurring enormous costs for countermeasures! Build a 3D analysis model on the computer.

Our company quickly resolves thermal environment issues in manufacturing sites. Using simulation software, we visualize heat and air flow on a computer. This allows us to understand current problems and swiftly compare and evaluate various countermeasures. Furthermore, with "FlowDesigner," we can visualize effective improvement proposals using inverse analysis. No specialized knowledge is required. 【Features】 ■ Energy saving ■ Heatstroke prevention ■ Cost reduction ■ Ability to swiftly compare and evaluate various countermeasures *For more details, please refer to the PDF document or feel free to contact us.

Company：アドバンスドナレッジ研究所
Price：Other

Thermo-fluid analysis
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Visualizing heatstroke prevention measures in factories through thermal fluid analysis!

Check the effects of air conditioning installation in a virtual space in advance! [We also accept commissioned analysis with no work required.]

Heat and airflow simulation software that can be started in 5 minutes "FlowDesigner" thoroughly supports the creation of comfortable spaces and work environments! You can quickly identify "issues in the thermal environment of factories" and compare various countermeasures. ◆ No work required! Outsourcing (contract analysis) is also available ◆ For those who say, "I can't find time to operate the software!" We offer an analysis service (contract analysis) where we handle everything from modeling to analysis! If you're interested in "using simulations to enhance appeal," please feel free to contact us. ◆ Here are some applications where it can be useful ◆ - Visualization of the effects of HVAC system implementation - Comfortable space design using simulations - Comparison of multiple layout proposals - Evaluation of heatstroke risk using WBGT (Wet Bulb Globe Temperature) ◆ Limited to online seminar participants! Trial version licenses are being issued ◆ Would you like to experience the effects of HVAC implementation using FlowDesigner?

Company：アドバンスドナレッジ研究所
Price：Other

Thermo-fluid analysis
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Quickly visualize the clean room environment during the design phase.

Constant temperature and humidity, local cleanliness, airflow methods... Solving various issues in clean rooms with fluid analysis! [We also accept contracted analyses with no work required on your part.]

Heat fluid analysis simulation software that can be started in 5 minutes 'FlowDesigner' thoroughly supports clean environment design! You can quickly consider the effects of introducing clean booth equipment in clean room design before construction. ◆ Useful for the following applications - Visualization of cleanliness - Temperature and humidity design within clean rooms - Comparison of unidirectional flow and non-unidirectional flow cases - Visualization of the effects of introducing clean booths ◆ No work required! Outsourcing (contract analysis) is also available For those who say, "I don't have time to operate the software!" We offer a [contract analysis service] where we handle everything from modeling to analysis! If you are interested in incorporating simulations into proposal materials, please feel free to contact us. ◆ Exclusive for online seminar participants! Trial version licenses are being issued We are distributing trial version licenses to those who participate in our online seminars. If you are worried about whether you can use the software effectively, you can evaluate our support services as well, so please feel free to apply!

Company：アドバンスドナレッジ研究所
Price：Other

Thermo-fluid analysis
soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

soft Product List and Ranking from 366 Manufacturers, Suppliers and Companies | IPROS GMS

soft Manufacturer, Suppliers and Company Rankings

soft Product ranking