Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
16～30 item / All 63 items
The MT160 is an ultrasonic thickness gauge capable of measuring thick materials, including metals, plastics, ceramics, composite materials, epoxy, and glass.
The probe can be used for special applications such as rough materials and high-temperature surfaces, and it can also maintain high measurement accuracy with two-point calibration.
TM8812C is a compact ultrasonic thickness gauge with a measurement range of 1.0mm to 200mm.
You can measure materials such as steel, cast iron, aluminum, zinc, crystal glass, polyethylene, and polyvinyl chloride.
Easily perform corrosion inspections and thickness measurements on pipes and tubes made of metals, glass, and special materials like resins!
High-precision inspection and measurement of pipes and tubes A comprehensive lineup from general-purpose to precision and special applications What is an ultrasonic thickness gauge? The frequency range of sound audible to the human ear is approximately 20Hz to 20KHz, and sound waves with frequencies higher than this are referred to as "ultrasound." In general ultrasonic testing equipment, the range is from 1MHz to 20MHz, with 5MHz being the most commonly used frequency. Ultrasonic measurement and inspection equipment applies these principles to convert the time taken for ultrasonic waves to travel back and forth into a distance, which is then displayed as a numerical value on the ultrasonic thickness gauge.
Inline-compatible multi-channel high-precision automatic thickness measurement device.
The "Ultrasonic Thickness Gauge HSC-104" is an ultrasonic thickness measurement device primarily used for automatically measuring the thickness and outer dimensions of metal and plastic plates and pipes in-line. 【Specifications】 ◎ Number of Channels: 1 to 4 CH ◎ Measurement Frequency: 1,000 times per second per CH ◎ Measurement Frequency: 5 to 20 MHz ◎ Measurement Method: Single Probe Pulse Reflection Method ◎ Measurement Modes: T-S1, S-B1, B1-B2 ◎ Measurement Accuracy: ±1/100 mm ◎ Gain: 0 to 63.5 dB (0.5 dB pitch) ◎ Thickness Display: LED 4-digit mm display ◎ Sound Velocity Setting: 1000 to 9998 mm ◎ Condition Setting: Manual or PC setting ◎ Moving Average Processing: Available 2/4/8/16 *For more details, please refer to the PDF document or feel free to contact us.
![Ultrasonic Thickness Gauge 'AD-3253B' [Rental]](https://image.mono.ipros.com/public/product/image/134/2000352874/IPROS92420348056293984064.jpeg?w=280&h=280)
Measuring the thickness of homogeneous metals and non-metals is possible! Thickness gauge using ultrasonic technology.
The "AD-3253B" is an ultrasonic thickness gauge that can measure the thickness of homogeneous metals and non-metals that allow ultrasonic waves to pass through. If the speed at which ultrasonic waves travel through the material (i.e., the speed of sound) is known, the thickness can be easily measured. 【Features】 ■ Utilizes ultrasonic waves ■ Measures thickness of metals and non-metals ■ Allows for easy thickness measurement * For more details, please download the PDF or feel free to contact us.
![Ultrasonic Thickness Gauge '45MG' [Rental]](https://image.mono.ipros.com/public/product/image/c2e/2000448497/IPROS70353361513200542209.jpeg?w=280&h=280)
Handles harsh environments! A high-performance, easy-to-operate, durable, and reliable ultrasonic thickness gauge.
【Features】 ■ Equipped with a semi-transparent QVGA color display that is clearly visible indoors and outdoors ■ Corrosion inspection using a dual transducer probe ■ IP67 rated waterproof and dustproof performance ■ Easy one-handed operation from either side. Equipped with a Japanese keypad ■ Supports internal and removable external microSD memory cards * For more details, please refer to the PDF document or feel free to contact us.
![Ultrasonic Thickness Gauge '38DL PLUS' [Rental]](https://image.mono.ipros.com/public/product/image/2eb/2000450940/IPROS95170250151918236712.png?w=280&h=280)
A thickness gauge that achieves high durability with IP67 compliant sealing and a rubber protective case.
The "38DL PLUS" is an ultrasonic thickness gauge that supports most inspection applications for ultrasonic thickness measurement and can use all types of probes, including dual-element and single-element probes. It comes standard with many high-performance and user-friendly measurement functions, and we also offer numerous software options for specialized applications. 【Features】 ■ Suitable for harsh environments ■ Easy to operate ■ Compatible with dual-element and single-element probes ■ Wide thickness measurement range: 0.08mm to 635mm (varies depending on material and probe type) ■ Corrosion thickness measurement using dual-element probes * For more details, please refer to the PDF documentation or feel free to contact us.
![Ultrasonic Thickness Gauge 'AD-3255' [Rental]](https://image.mono.ipros.com/public/product/image/1e9/2000461726/IPROS16187873619364869598.jpeg?w=280&h=280)
For measuring the thickness of a wide range of materials such as metal, glass, plastic, ceramic, and epoxy.
【Features】 ■ Covers a wide measurement range with a single unit (0.8 to 300mm) ■ Display resolution of 0.01mm (switchable between 0.01/0.1mm display) ■ Equipped with a scan mode that can measure the minimum thickness over a wide range ■ Displays the coupling status, allowing confirmation of contact state ■ Battery level indicator for dry batteries ■ Auto power-off function ■ Backlight function (easy to read display in dark environments)
![Ultrasonic Thickness Gauge 'TI-55K (for Thin Materials)' [Rental]](https://image.mono.ipros.com/public/product/image/a49/2000461733/IPROS41439754460169483524.jpeg?w=280&h=280)
It is an ultrasonic thickness gauge that can be measured by simply applying the probe from one side and can measure non-destructively.
【Features】 ■ You can start using it immediately by simply adjusting the zero point and sound speed. ■ The auto power-off function automatically turns off the power if there is no operation for more than 3 minutes. ■ Thanks to the sound speed memory, once you adjust the sound speed, the set sound speed value is retained even when the power is turned off, and no further adjustments are needed until the material of the test specimen changes. ■ The coupling mark is displayed on the LCD screen, allowing you to check whether the ultrasound is being received correctly and to determine if the measurement is normal. ■ It is compact and lightweight, powered by a single AA alkaline battery, enabling long-term use in the field.
![Ultrasonic Thickness Gauge 'TI-56H (for High Temperature)' [Rental]](https://image.mono.ipros.com/public/product/image/0f7/2000461740/IPROS74432056847308095815.jpeg?w=280&h=280)
It is an ultrasonic thickness gauge that can be measured simply by applying the probe from one side and can measure non-destructively.
【Features】 ■ You can start using it immediately by simply adjusting the zero point and sound speed. ■ The auto power-off function automatically turns off the power if there is no operation for more than 3 minutes. ■ Thanks to the sound speed memory, once you adjust the sound speed, the set sound speed value is retained even when the power is turned off, and no further adjustments are needed until the test material changes. ■ The coupling mark is displayed on the LCD screen, allowing you to check whether the ultrasonic signal is being received correctly and determine if the measurement is normal. ■ It is compact and lightweight, powered by a single AA alkaline battery, making it suitable for long-term use in the field.
![Ultrasonic Thickness Gauge 'DM4DL' [Rental]](https://image.mono.ipros.com/public/product/image/165/2000461762/IPROS54258708221895550730.jpeg?w=280&h=280)
This is equipment designed for general thickness gauges used on plants and other facilities that can only be measured from one side.
**Features** - Stores up to 5,390 measurement data points - Easy operation of all functions with fewer keys - Quick automatic calibration through automatic probe zero-point adjustment - Large, easy-to-read display with backlight - LED alarm with adjustable upper and lower thickness limits - Automatic identification of DIALOG intelligent probes - Resolution and unit selection of 0.001 inch, 0.01 inch, 0.1 mm, and 0.01 mm - Wide range of measurements for various materials - Frequency selection using band filters suited to the probe frequency - Minimum value detection in minimum capture mode (25 times per second) - DUAL MULTI function (measures only the base material thickness without removing the coating)
![Ultrasonic Thickness Gauge '37DL PLUS' [Rental]](https://image.mono.ipros.com/public/product/image/040/2000461765/IPROS05259137159307075383.jpeg?w=280&h=280)
Even if the surface is coated or painted, it has many features that allow for easy measurement of the original metal thickness.
**Features** - The patented THRU-COAT technology measures and displays the thickness of metal and coating using a single bottom echo. - The temperature compensation function adjusts the material sound velocity according to changes in material temperature. - The average/minimum mode saves the average or minimum thickness measurement values. - The A-scan display has improved contrast and visibility, achieving a brighter display. - A wide range of dual transducer and single transducer types (contact type, delay line type, immersion type) are available. - The EMAT transducer allows for measuring the thickness of iron without using a coupling medium from surfaces with scale buildup. - Grid point flags (minimum, maximum, alarm, A-scan) can be selected. - The grid file can be expanded by adding columns or rows or changing the direction of increase. - The file-based alphanumeric data logger allows for a maximum of 32 characters in the file name and up to 20 characters in the ID number.
![Ultrasonic Thickness Gauge 'TI-56F (for Castings)' [Rental]](https://image.mono.ipros.com/public/product/image/db5/2000485847/IPROS68287333723469329682.jpeg?w=280&h=280)
It is an ultrasonic thickness gauge that can be measured simply by applying the probe from one side and can measure non-destructively.
- You can start using it immediately just by performing zero point adjustment and sound speed adjustment. - The auto power-off function automatically turns off the power if there is no operation for more than 3 minutes. - Thanks to the sound speed memory, once you adjust the sound speed, the set sound speed value is retained even when the power is turned off, and no further sound speed adjustment is needed until the material of the test specimen changes. - The coupling mark is displayed on the LCD screen, allowing you to check whether the ultrasound is being received correctly and to determine if the measurement is normal. - It is compact and lightweight, powered by a single AA alkaline battery, allowing for long-term use in the field.
![Ultrasonic Thickness Gauge 'CTS-30A' [Rental]](https://image.mono.ipros.com/public/product/image/db4/2000485976/IPROS50338563316769420454.jpeg?w=280&h=280)
The thickness of the material can be easily measured by the propagation time of ultrasound.
■Easy thickness measurement for anyone ■Can measure both thickness and sound velocity with a single device ■Capable of measuring the thickness of non-metal materials (glass, ceramics, plastics, etc.) as well as metals ■Applicable for corrosion and wall thickness inspection ■Can store minimum values, calculate average values, and set limit values (alarms) ■LCD screen with backlight ■Measurement data can be saved for up to 5,000 points ■Data transfer to PC using the included software
![Ultrasonic Thickness Gauge 'UM-5' [Rental]](https://image.mono.ipros.com/public/product/image/bde/2000486163/IPROS31959520901274641695.jpeg?w=280&h=280)
High-performance ultrasonic thickness gauge with real-time waveform display (A-scope), also includes a 2MHz probe for measuring low attenuation materials.
High-performance ultrasonic thickness gauge with real-time waveform display (A-scope). Includes a 2MHz probe for measuring high-damping materials.
