設計BIMソフト×トリンブル・ソリューションズ - メーカー・企業と製品の一覧

[BIM Software Implementation Case Study] Mechanical (Cultural Center)

Adopting an appropriate solution! A case where work was coordinated through open communication.

This project connects two reinforced concrete structures using steel trusses with concrete slabs on each floor. The complexity of the joints in the steel structure, as well as the joints between the steel and reinforced concrete structures, increased due to their shapes and angles, becoming a challenge for the project. By maintaining open communication among the design architects, structural engineers, and fabrication team, we were able to smoothly discuss and adopt appropriate solutions even for very challenging aspects of the overall steel construction. 【Case Overview】 ■Challenges - Complexity of the joints in the steel structure - Increased complexity of the joints between the steel and reinforced concrete structures due to their shapes and angles ■Result: We were able to adopt appropriate solutions *For more details, please refer to the PDF materials or feel free to contact us. (If the PDF button is not displayed) ⇩The catalog can be downloaded from the special website below⇩

企業：トリンブル・ソリューションズ
価格：Other

Software (middle, driver, security, etc.)
Other CAD related software

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[BIM Software Implementation Case Study] Boat Landing

Boat landing of AME-2 and AWG-1! Effective design collaboration has been achieved!

Pinnacle has been appointed as the structural engineering consultant to support the development and structural engineering of safe and reliable boat landings (docks) off the coast of the Netherlands. The main engineering challenge was to install the boat landing on the existing jacket between the sea surface and the platform's "spider deck." The company evaluated the design, as well as wind, wave, tide, and impact conditions, and then analyzed the structure of the boat landing to carry out detailed design using "Tekla Structures." By involving the steel fabricator, vessel operators, and installation and rope access contractors from the structural design and detailed design stages, reliable work was carried out in the manner recommended by the main clamp and frame installation contractors. The cost efficiency was very high, and despite the challenging conditions, there were no accidents, and no modifications were needed on-site. *For more details, please refer to the PDF materials or feel free to contact us. (If the PDF button is not displayed) ⇩ The catalog can be downloaded from the special site below ⇩

企業：トリンブル・ソリューションズ
価格：Other

3D CAD
antenna
2D CAD Construction

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[BIM Software Implementation Case Study] Bjelgste Office Building

We combine traditional building materials like wood with modern design and manufacturing techniques!

"Birgstad Financial Park" was constructed as an office building for SpareBank 1 in Stavanger, Norway. The above-ground structure uses wood (a natural, renewable, and locally sourced material) as the primary load-bearing element. The floors are made of cross-laminated timber panels, supported by laminated beams and columns. The main wooden components are designed with strength in mind, and through high-precision processing, most of the wood can be directly joined without the use of metal fasteners, thereby shortening the construction process. Thanks to the advanced modeling technology of "Tekla Structures," the beams not only achieve aesthetic beauty but also meet practical requirements. *For more details, please refer to the PDF document or feel free to contact us. (If the PDF button is not displayed) ⇩ The catalog can be downloaded from the special website below ⇩

企業：トリンブル・ソリューションズ
価格：Other

3D CAD
antenna
2D CAD Construction

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[BIM Software Implementation Case Study] Transformation of North Sea Oil Field Platform Construction

Efficient design and manufacturing automation! Achieving advanced automation in the design and manufacturing processes!

The two platforms of the Johan Sverdrup oil field are designed and manufactured by the Norwegian company Aibel. Currently, the company's massive project is transitioning from a shipyard in the tropical region of Thailand to the rough seas of the North Sea. This project faced challenges such as compliance with standard requirements in the oil and gas industry and the integration of Tekla software with existing solutions. To address these challenges, experts in three-dimensional design using Tekla software collaborated to successfully semi-automate the drawing creation process with Tekla. They generated accurate information in a data format suitable for collaboration with machine tools, achieving up to 95% efficiency in the company's production labor and quality. *For more details, please refer to the PDF materials or feel free to contact us. (If the PDF button is not displayed) ⇩ The catalog can be downloaded from the special website below ⇩

企業：トリンブル・ソリューションズ
価格：Other

3D CAD
antenna
2D CAD Construction

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[BIM Software Implementation Case] Concentrated Solar Power Plant

The main steel structure consists of 16 columns! It is supported by three main platforms!

SteelPro 4 s.r.o. undertook the basic design, general layout creation, and modeling of all connections for a steel structure 3D model of a solar receiver (MSR) with a total weight of approximately 900 tons and a height of 36 meters. The main steel structure will be completed, including secondary structures such as platforms, various walkways, and supports for equipment. Appropriate solutions were required to resolve technical space requirements and interference with the structure. A significant reason for the success of this project was the sharing of the 3D model among members of different professions, which not only allowed for progress tracking but also enabled close collaboration among stakeholders. Additionally, the structure was divided into production units in line with the delivery schedule, and the 3D model was provided to steel trading companies and steel fabricators. This made it possible to create drawings both at the manufacturing plant and on-site. *For more details, please refer to the PDF materials or feel free to contact us. (If the PDF button is not displayed) ⇩ The catalog can be downloaded from the special site below ⇩

企業：トリンブル・ソリューションズ
価格：Other

3D CAD
antenna
2D CAD Construction

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[BIM Software Implementation Case Study] Karasuma Racecourse Redevelopment Project

Tekla is effective for designing buildings with large curves! Examples from redevelopment projects such as spectator stands.

The redevelopment of the Karasuyama Racecourse is a project to construct world-class facilities. The company responsible for the project is handling everything from design to detailed design, manufacturing, and the construction of the main viewing stand roof using a 45-meter cantilever beam. The very complex roof shape had significant restrictions on deflection and allowable tolerances, but by utilizing "BIM" and "Tekla Structures," they conducted precise detailed design that considered the use of fabrication drawings. [Case Overview] ■ Challenge: The very complex roof shape had significant restrictions on deflection and allowable tolerances. ■ Results - Achieved precise detailed design that considered the use of fabrication drawings. - Tekla is very effective for designing buildings with large curves, like the Karasuyama Racecourse. *For more details, please refer to the PDF materials or feel free to contact us. (If the PDF button is not displayed) ⇩ The catalog can be downloaded from the special website below ⇩

企業：トリンブル・ソリューションズ
価格：Other

2D CAD Construction
3D CAD
Modeler

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[BIM Software Implementation Case] UAE Pavilion at the Dubai International Expo

Completing the project through collaboration! Introducing case studies of implementation in commercial facility construction.

The National Media Council of the United Arab Emirates adopted the design proposal by architect Santiago Calatrava for the UAE Pavilion at the 2020 Dubai International Expo. In July 2017, Arabtec Construction, a 100% subsidiary of Arabtec Holding, which is responsible for infrastructure development, won the construction contract for the pavilion. Despite facing various challenges, including a very tight deadline and the fact that all major rib materials were cambered, we received positive feedback stating, "Thanks to Tekla Structures and Tekla BIMsight, we were able to complete the project while collaborating effectively." [Challenges] ■ Very tight deadline ■ Composed mostly of beams joined with special specifications ■ All major rib materials are cambered *For more details, please refer to the PDF document or feel free to contact us. (If the PDF button is not displayed) ⇩The catalog can be downloaded from the special website below⇩

企業：トリンブル・ソリューションズ
価格：Other

2D CAD Construction
3D CAD
Modeler

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Domestic Utilization Case Studies] Steel Frame Detailed Modeling

A case study utilizing Tekla Structures for steel detailing modeling has been published in the "Nikkankensetsu Tsushin Shimbun."

By downloading the PDF, you can view the catalog for the structural BIM software 'Tekla Structures' (Steel Detail Modeling) and case study articles on its use in Japan. (If the PDF button is not displayed) ⇩ Case study articles can be downloaded from the special site below ⇩

企業：トリンブル・ソリューションズ
価格：Other

3D CAD
antenna
2D CAD Construction

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Tekla Structures Domestic Utilization Case] Shobutani Co., Ltd.

A case study utilizing Tekla Structures was featured in the "Nikkankensetsu Tsushin Shimbun."

On May 31, 2023, our customer's case study was featured in the BIM special edition of the "Daily Construction Communication Newspaper." "Standardization within the Company using Tekla" Shobutani Co., Ltd., a steel fabricator, is recognized as a pioneering company with nearly 20 years of experience in implementing Tekla. In the published article, they shared their journey with Tekla and their future outlook. Please take a look. (If the PDF button is not displayed) ⇩ The catalog can be downloaded from the special site below ⇩

企業：トリンブル・ソリューションズ
価格：Other

antenna
2D CAD Construction
3D CAD

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

A comprehensive document explaining the seven reasons successful companies adopt BIM is now available!

Explaining the benefits and utilization methods of 'BIM' that contribute to solving issues such as design stage defects, rework in construction, and project schedule delays!

To promote DX in Japan's construction industry, the Ministry of Land, Infrastructure, Transport and Tourism is actively encouraging the spread of BIM/CIM, leading many companies, including major general contractors, to adopt BIM one after another. BIM is expected to provide innovative solutions as a trump card to solve the complex challenges faced by the construction industry, such as defects in the design phase, rework during construction, and delays in project timelines. This article will thoroughly explain the significant advantages that BIM brings to designers, contractors, and clients, detailing its specific benefits and utilization methods from a functional perspective. By exploring the potential of BIM, you may find new solutions to the challenges your projects face. If you are considering the introduction of BIM, please use this as a reference. [Contents (Excerpt)] ■ Definition of BIM: BIM is not just a design tool ■ Centralized management of all information ■ Data consistency ■ Prevention of errors and reduction of rework and correction tasks *For more details, please download the PDF or feel free to contact us.

企業：トリンブル・ソリューションズ
価格：Other

3D CAD

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Tekla Structures Domestic Case Study] Takenaka Corporation

A case study utilizing Tekla Structures was published in the "Daily Construction Communication News."

In the November 29, 2024 issue of the "Daily Construction Communication Newspaper," a case study from our client was featured. "First in Japan to Apply 'Approval Within BIM Model'" The major general contractor, Takenaka Corporation, has completely eliminated traditional 2D detailed drawings and was the first in Japan to apply "Approval Within BIM Model." "We accomplished everything with the Tekla model instead of creating detailed drawings. The approval process has been shortened for both the general contractor and the steel fabricator due to the approval within the model, leading to a reduction in the creation of detailed drawings," they discussed the effects. For more details on this initiative that overturns the conventional wisdom of "not relying on drawings," please check out the article.

企業：トリンブル・ソリューションズ
価格：Other

antenna

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

What is the digital twin that holds the key to construction DX? An explanation of the benefits of BIM collaboration.

We are offering materials that explain the role of 'Digital Twin', which is gaining attention in the construction industry, and the benefits of the integration of Digital Twin and BIM!

Have you ever heard the term "digital twin"? The digital twin, which creates a complete digital replica of real-world objects, is gaining global attention, particularly in the manufacturing and construction industries. This document provides a clear explanation of the concept of digital twins, their role in the construction industry, and the benefits of integrating digital twins with BIM, among other noteworthy backgrounds. If you are interested in industry reforms such as construction DX, please read on. [Contents (excerpt)] ■ Diverse applications of digital twins ■ Digital twins and the construction industry ■ BIM and digital twins are a perfect match ■ Benefits of digital twins *For more details, please download the PDF or feel free to contact us.

企業：トリンブル・ソリューションズ
価格：Other

3D CAD

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

設計BIMソフト×トリンブル・ソリューションズ - メーカー・企業と製品の一覧

設計BIMソフトの製品一覧