日本マテック List of Products and Services

The "A1020 MIRA LITE" is a compact and lightweight concrete reinforcement, hollow, and inspection flaw detector. It is a lightweight sister device to the "A1040 MIRA," compacting the conventional 12 channels down to 8 channels. The antenna array and display unit have been separated. Additionally, the 3D data analysis software "INTROVIEW" is included as standard. 【Features】 ■ Lightweight sister device to the A1040 MIRA ■ Real-time B-scope display ■ Shear wave ultrasound that does not require water or oil ■ Improved near-distance resolution ■ 3D data analysis software "INTROVIEW" included as standard *For more details, please refer to the PDF materials or feel free to contact us.

• Testing Equipment and Devices

The "A1410 PULSAR" is an ultrasonic velocity meter that measures the speed of sound in concrete, allowing for easy evaluation of compressive strength. In addition to numerical display of measurement values, it can also display waveforms, enabling estimation of crack depth from the increase in propagation time due to cracks. Furthermore, data can be transferred to a smartphone via Bluetooth. 【Features】 ■ Easy and accurate measurement of propagation time T, with sound speed calculation based on distance input ■ Displays both numerical measurement values and waveforms ■ Sensitivity auto-adjustment for ease of use on site ■ Enables estimation of crack depth from the increase in propagation time due to cracks ■ Data transfer to smartphones via Bluetooth *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "A1525 SOLO" is an array ultrasonic flaw detector that employs multi-SAFT, enabling accurate B-scan display and analysis through skip calculation display. With 2D wide-range high-sensitivity adjustment, it allows for precise defect separation, shape display, dimensional analysis, and position measurement. The groundbreaking wedge-free transducer design offers exceptional ease of use for operation and analysis, enabling high-precision analysis. 【Features】 ■ Capable of B-scope display ■ Utilizes TFM with multi-SAFT ■ Sensitivity adjustment can be semi-automatically adjusted ■ Standard A-scope flaw detection available ■ Works with two vertical or angled transducers *For more details, please refer to the PDF materials or feel free to contact us.

• Testing Equipment and Devices

The ETi-200 is a multi-wave, multi-channel eddy current testing device that can use either a single or dual probe. With the dual probe, it is possible to switch between 4 channels for each probe, and many settings can be configured from the channel settings screen, not just the frequency. The single probe allows for switching between 8 channels and is equipped with many flexible features and characteristics that are unprecedented for a portable device. 【Features】 ○ High sensitivity and high signal-to-noise ratio analog circuits ○ Latest software including mixing, measurement cursors, alarms, and settings save functions ○ Robust aluminum die-cast housing and rubber mold designed ergonomically ○ Long battery operating time (6-7 hours) with easy battery replacement "quick swap" ○ Eddy current cartridges are detachable for future upgrades and expansions For more details, please contact us or download the catalog.

• Flaw detection testing

"WeldCheck" is a portable eddy current testing device ideal for detecting weld defects. It features a large 5.7" monitor with 18-bit color, providing a clear and easy-to-read display even in bright outdoor conditions. 【Features】 ○ Frequency: 20Hz-20MHz, Sensitivity 100dB ○ Long-lasting battery operation, 8.5 hours ○ Easy-to-use simple operation ○ Weld probe compatible with magnetic materials and excess weld areas For more details, please contact us or download the catalog.

• Flaw detection testing

The portable eddy current testing device "Vantage" is ideal for aviation and maintenance inspections. It features a display that is easy to see both during the day and at night with Day mode and Night mode indicators. Designed for one-handed operation, it is user-friendly and easy to operate. 【Features】 ○ 2 frequency + MIX channel display ○ Recorder display: 2 channels ○ Interpolating probes can also be used ○ Rotary probes can also be used For more details, please contact us or download the catalog.

• Flaw detection testing

The EMAT electromagnetic ultrasonic thickness gauge "A1270" generates ultrasonic waves in materials through electromagnetic induction, eliminating the need for a coupling medium. It allows for thickness measurement of the base material from the surface of the coating. This is an unprecedented high-sensitivity EMAT that can detect the JIS test specimen V5 (distance 50mm, φ2 flat-bottom hole) with a signal-to-noise ratio of 6dB or higher. You can also select the thickness measurement display mode (standard) and the A-scope waveform display screen, enabling flaw detection as well. 【Features】 ○ Uses SH wave probe ○ No coupling agent required ○ 2000 data memory ○ Data can be transferred to a PC via USB ○ Signal correlation process analysis possible For more details, please contact us or download the catalog.

• Other measurement, recording and measuring instruments
• Coating thickness gauge

The conductivity meter "Sigma Check" is ideal for aircraft, maintenance inspections, and material identification. It can measure conductivity in % IACS, MS/m, perform lift-off measurements, temperature measurements with automatic temperature compensation, and display material names. It is suitable for applications such as material identification and evaluation, heat treatment evaluation, inspection of heat-affected zones, evaluation of aluminum aging, and measuring the thickness of non-conductive coatings. 【Features】 ○ High precision ○ High functionality ○ Stability ○ Reliability ○ User-friendly operation For more details, please contact us or download the catalog.

• Other measurement, recording and measuring instruments
• Other electric meters

The ultrasonic thickness gauge "Echo Meter 1077 DATA" is a high-performance ultrasonic thickness and sound velocity gauge that allows for switching between thickness measurement and sound velocity measurement, equipped with waveform display functionality and a data logger. With A-Scope display, it enables measurements that were previously difficult, such as those on damping materials. By selecting the B1-B2 measurement mode, it allows for thickness measurement over coatings. 【Features】 ○ Selectable probe mode ○ Large display area of 50mm x 37mm with backlight ○ Compact and lightweight ○ Capable of measuring over coatings ○ Drip-proof case: equivalent to IP54, with protective rubber For more details, please contact us or download the catalog.

• Coating thickness gauge
• Other measurement, recording and measuring instruments

The ultrasonic tomographer A1040, New MIRA, is the latest advanced concrete inspection system that has further enhanced the performance of MIRA, which has been highly praised for its capabilities, penetration power, and innovation since its announcement. It can be applied to ordinary concrete, reinforced concrete, and stone, and by simply making contact with the uniquely developed DPC sensor from one side, it is possible to detect and measure internal foreign objects, voids, defects, honeycombing, and cracks. Since it uses ultrasound, it can inspect not only rebar but also the position and depth of resin pipes, and it can be applied even when there is a mesh near the surface. 【Features】 ○ Excellent penetration power, capable of inspection up to a depth of 2 meters ○ Uses DPC ultrasonic sensors → No need for contact media such as water or oil as in conventional methods ○ Each sensor is independently spring-held → Can accommodate surface irregularities ○ Employs transverse waves with excellent penetration power, sensitivity, and SN ratio ○ Sensors are arranged in a 12-channel array For more details, please contact us or download the catalog.

• Flaw detection testing

The flaw detector A1220 consists of a main unit (screen, keyboard) and an antenna array (AA) arranged with 24 matrix DPCs (6x4). The AA elements of the device enable dry contact ultrasonic transmission and reception without coupling agents. Each AA element is equipped with springs, allowing it to conform to curved or rough surfaces. An optional two-probe method is also available. 【Features】 ○ Pulse-echo method ○ No coupling agent required ○ A-Scan and B-Scan display of echo signals ○ Detection of weak signals from noise ○ Automatic or manual defect classification or thickness determination For more details, please contact us or download the catalog.

• Flaw detection testing

The ultrasonic phased array flaw detector "Pragma PA" features a compact and robust aluminum housing combined with a battery, making it portable and capable of withstanding harsh environments. The platform uses a common interface that can be utilized with other inspection methods such as ET and EMAT. 【Features】 ○ Easy to use with a rotary wheel operation, necessary direct function keys, and a large screen that combines usability with visibility. ○ Bright screen with clear signal display and a vertically elongated screen design. For more details, please contact us or download the catalog.

• Flaw detection testing

Phased arrays have been expected to serve as a new era of inspection devices due to their diverse functionalities. However, there have also been opinions that their excessive diversification makes them too difficult for general use. Going back to the basics, the primary feature of phased arrays is the ability to instantly display cross-sectional views, allowing for immediate confirmation of the shape, position, and number of defects. This capability helps prevent oversight and misjudgment, enhances usability and ease of assessment, enables accurate inspection judgments, and expands the range of applications. Additionally, since the current standards involve assessments based on A-scopes, the current evaluations on PA cross-sections do not meet the standards. Therefore, the display screen of the phased array is positioned as a supplementary screen to prevent oversights, focusing the assessment concept on A-scope evaluations. We have completed a low-cost phased array inspection device that combines the minimum necessary functions and performance of phased arrays with the standard functions of conventional inspection devices. I am confident that this direction will lead to the future of general-purpose inspection devices. For more details, please contact us or refer to the catalog.

• Flaw detection testing
• Other measurement, recording and measuring instruments

The ECHOMETER 1075 DATA is a high-performance ultrasonic thickness and sound velocity gauge that can switch between thickness measurement and sound velocity measurement with just one device. It features a large display area of 50mm x 27mm with a backlight, is compact and lightweight at 131mm x 81mm x 32mm and 250g, operates for 150 hours on two AA batteries, and includes a low battery warning alarm. It is a pocket-sized thickness gauge that can fit into a shirt pocket, measuring only 32mm in thickness and weighing 250g! It also supports the use of high-frequency small probes for enhanced performance. This is a feature-packed hit product. For more details, please contact us or refer to the catalog.

• Other measurement, recording and measuring instruments

The ECHOMETER 1076 TC DATA is a high-performance ultrasonic thickness and sound velocity gauge that can switch between thickness measurement and sound velocity measurement with just one device. Equipped with a multiple echo interval measurement mode, it can measure the thickness of the base material without being affected by surface coatings, even when measuring between repeated bottom echoes. It has a built-in data logger function, and data can be transferred to a PC using dedicated software. This pocket-sized thickness gauge is only 32mm thick and weighs 250g, making it small enough to fit in a shirt pocket! It also supports the use of high-frequency small probes, offering high performance! This product is packed with features. For more details, please contact us or refer to the catalog.

• Other measurement, recording and measuring instruments

The Leptoscope 2042 is a high-performance electromagnetic film thickness gauge that can use a variety of detachable probes. It features a unique small-diameter microprobe available only from Karl Deutsch. It has a built-in data logger (up to 3850 points) with RS232C output, allowing data transfer to a computer, and offers options for calibration from simple operational calibration to high-precision measurement calibration. For more details, please contact us or refer to the catalog.

• Coating thickness gauge

The Labino(R) Torch Light UVG3 is a compact and lightweight UV-A light that provides a high intensity of 12,000μW/cm2 at a distance of 400mm. It uses LEDs, which offer high durability and excellent cost performance. The housing case is designed to be robust and user-friendly, with military specifications. It can be used in tight spaces and areas that were previously inaccessible. It complies with ISO and JIS2320 standards, with a wavelength of 365nm and visible light below 1Lx. Additionally, we also offer a high-brightness black light "UV LAMP 3818" that can be used during the day. For more details, please contact us or refer to the catalog.

• Ultraviolet irradiation equipment
• LED lighting

All SITE X/SITE XS models use rod-shaped electrodes. The focal spot is positioned outside the explosion-proof high-voltage section. This idea is very advantageous for other performance improvements, reducing the number, thickness, and amount of lead used in lead shielding, contributing to weight reduction. This realization of lightweight and simplification further leads to improvements in quality and performance. As a result, it has made it possible to enhance performance, such as increased durability and improved cooling performance. For more details, please contact us or refer to the catalog.

• X-ray inspection equipment

The temate(R) PowerBox H is the first handheld battery-powered EMAT device capable of outputting a peak power of MAX 1200V/8kW at a PRF of 100Hz. The device is equipped with a digitizer and a broadband pulser/receiver, designed for various applications such as flaw detection, thickness measurement, and material evaluation, suitable for use in manufacturing plants as well as in the field. It can generate spike pulses and burst waves in the range of 100kHz to 6MHz, allowing for the use of various modes such as longitudinal waves, transverse waves, guided waves, and SH waves in both single and dual probe methods. Both single and dual probe methods can be easily selected using the built-in transmit/receive switch without the need for additional equipment. It also features a port for a thermosensor, enabling automatic correction of sound velocity changes due to the temperature of the inspected object. For more details, please contact us or refer to the catalog.

• Flaw detection testing
• Other measurement, recording and measuring instruments

● The digital portable dual-frequency eddy current testing device is a handheld high-performance eddy current tester that incorporates the latest technology with dual frequencies. ● The popular MIZ-21A has been unified to dual frequency, achieving the highest sensitivity while also providing the best resolution and signal-to-noise ratio, resulting in overwhelming performance. ● It excels in detecting cracks, corrosion, heat effects, and material identification, and also features a digital conductivity measurement function. ● The mixing of dual frequencies allows for the elimination of unwanted signals. ● It meets MIL and aerospace specifications with a design that is robust, durable, and resistant to low temperatures. ● In low temperatures, the heater automatically activates to maintain the display. ◆ The multi-display mode facilitates testing with various display options. The MIZ-21B offers seven selectable display modes: - XY impedance plane (Lissajous waveform) - Bar graph - Trigger time sweep waveform - Automatic sweep waveform (slow/fast) - C-Scan display - Conductivity numerical display This allows for the selection of a display mode that is easy to read and suitable for the intended application.

• Testing Equipment and Devices
• Flaw detection testing

The ultrasonic flaw detector Echograph 1090 is a revolutionary device equipped with a thin, compact, lightweight aluminum body and a color LCD display. It boasts robustness and has enhanced shock resistance with protective rubber. 【Features】 ◆ Uses lithium batteries! Operates for 13 hours! Energy-saving mode! Safe automatic charging with an internal charging circuit processor! ◆ Color settings available for measurement screens and menu screens! ◆ Parameters, help texts, etc., can be edited on a computer and transferred to the main unit for storage! ◆ Abundant setting assist functions: For example, delay material length correction for probes can be easily set. ◆ Upgradeable via USB from an external PC ◆ Pulse Repetition Frequency (PRF): 1500Hz ◆ Real-time hardware gate output (2 gates) ◆ Sync mode: Internal/External (in/out)

• Ultrasonic Oscillator
• Image Processing Equipment
• Flaw detection testing

● The high-precision ultrasonic thickness gauge for quality control displays the thickness digitally by simply placing the probe on one side of the measured object. 【Features】 ◆ Labor-saving - No special skills required, easy for anyone to use. ◆ Time-saving - No preparation needed, quick measurements save time. ◆ Cost-saving - Products do not need to be cut for inspection, allowing for strict thickness management and material cost savings. ◆ Quality improvement - Significantly increase the number of inspection points in the same amount of time, enabling confident delivery of inspected products. ◆ High precision - ±0.01 to ±0.001mm, the highest accuracy of ultrasonic measurements.

• Image Processing Equipment
• Other measurement, recording and measuring instruments

● The USB-connected ultrasonic module transforms your computer into a high-performance ultrasonic flaw detector via USB connection. ◆ It operates the pulser/receiver solely on power supplied from the USB. ◆ The transfer speed is displayed without issues using USB 2.0. ◆ Designed based on an online system, it possesses the performance of a high-performance flaw detector. ◆ High frequency: 35MHz, low noise! ◆ Spot inspection, module can be mounted (optional).

• Ultrasonic Oscillator
• Image Processing Equipment
• Other measurement, recording and measuring instruments

● Very efficient inspection of the inner surface of tubes with diameters from 5mm to 120mm and weld inspections! ● Wide range of applications from pharmaceuticals, chemicals, and food to plants. 【INVIZ Revolver 12.7】 Electric rotating model with the smallest diameter (continuous 360°), field of view direction: 90° side, 0° possible. 【INVIZ Inspector】 Equipped with a robust protective outer covering, detachable 90° mirror can be attached. 【INVIZ iNSPECTOR 10/8】 Revolutionary model for bends equipped with remote focus function. 【INVIZ H4】 Hybrid type combining a micro camera and fiber, ideal for narrow spaces and multiple bends (supports up to 7 bends).

• Optical microscope
• Microscope
• Other image-related equipment

● The high-brightness spot hand lamp is a spot type, but it can achieve a high illuminance of 40,000μw/cm2 at a distance of 500mm. ● Not only does it not require dark curtains, but it also enables magnetic testing outdoors during the day. 【Benefits】 ◆ It can be operated while standing, reducing strain on the legs and back. ◆ Magnetic testing is possible even under bright sunlight. 【Night work can be shifted to daytime work】 As a result: Night shifts are eliminated, 1. Cost reduction! 2. Healthier work! 3. Improved safety! 4. Peace of mind in labor management! 5. Resolution of nighttime noise issues! 6. Easy photography of shapes and defects! 【Device Features】 ◆ Separate type for power supply and lamp! ◆ Lightweight lamp: Weight 1.2Kg ◆ Power unit: Weight 1.5Kg ◆ Low power consumption 35W bulb ◆ Cool design with minimal heat generation ◆ Easy-to-hold pistol grip ◆ Robust design, drop-tested ◆ Does not use filaments ◆ Ready to use immediately upon power ON (5-15 seconds) ◆ Quick re-ignition is also possible! ◆ Drip-proof housing equivalent to IP65 ◆ Bulb lifespan of over 2000 hours.

• Other lighting equipment
• Signal lights and rotating lights

The ultrasonic PC board 3100 is a high-speed 200MSS sampling plug-in board for PCs that can also be applied to industrial automation systems. - It integrates ultrasonic and AD conversion on a single PCI board. - Sample display software is included, so it can be used immediately. - Sample software API, as well as source and DSP software (DLLs for LabVIEW/C++/VB, ActiveX, Help) are also included, allowing for the construction of a custom system. (Note: LabVIEW main software is required for development.) 【Features】 - Square pulse with a fall time of 5ns - Wideband amplifier from 0.5 to 20MHz - Equipped with a 200MHz high-speed AD converter - Amplification linearity within ±0.5dB - Short near-field dead zone - TOF/thickness measurement resolution of 5ns - Vertical axis resolution of 10 bits - Pulse repetition frequency of 20kHz - Equipped with a 105dB dynamic range amplifier - Low noise of <20% FSH - Vertical axis linearity within ±1% - DAC function of ±40dB/μs

• Image Processing Equipment
• Expansion Boards

◆Measurement range: 0.7 to 250mm (steel) (varies depending on probe selection) ◆Display resolution: 0.1mm / 0.01mm ◆Measurement resolution: 0.05mm ◆Measurement accuracy: ±0.1mm ◆Sound speed setting range: 100 to 9999m/s ◆Power supply: 2 AA alkaline batteries, 200 hours of use; 2 AA Ni-Cd batteries, 90 hours of use ◆Dimensions: W65×H120×D22mm ◆Weight: 20g (main unit only) 160g (including batteries) ◆For inquiries, please contact us at the following: Tokyo Headquarters: TEL: 03-3221-7531 Osaka Branch: TEL: 06-6885-6201

• Image Processing Equipment
• Other measurement, recording and measuring instruments

The ultrasonic robot system is the high-end system from FORCE, which has been developing automatic flaw detection systems, including ultrasonic scanners and image display software, for over 25 years. 【Features】 ◆ All-in-one configuration: The ultrasonic unit and scanner control unit are integrated into one body. ◆ Can be connected to all FORCE scanners without additional parts. ◆ Remote control is possible even over long distances. ◆ Supports water pumps and allows for remote operation. ◆ Durable and robust design suitable for industrial environments. ◆ Compact and lightweight. ◆ Underwater robot inspection (optional). ◆ Operates in a standard Microsoft Windows environment (for use in harsh environments, the use of industrial laptops is recommended). ◆ Compatible with P-scan System 4. ◆ Supports all inspection methods including P-scan, T-scan, transmission method, TOFD, and A-scan full waveform recording.

• Other industrial robots
• Image Processing Equipment

◆32-channel system ◆2048 types of Focal Laws ◆Transmission voltage 80-200V ◆Standard built-in hard disk 40GB ◆Supports 2D array probes ◆Focal selection: equidistant focus, constant depth focus, constant Y distance focus ◆Battery-operated, rechargeable NiLith, 3 hours of operation ◆Display: TFT 800x600 pixels ◆Frequency range: 500kHz to 15MHz ◆Max Element Delay: 81 seconds ◆Display method: A/B/S-scan real-time ◆Dimensions: 307x290x94mm ◆Weight: 4kg including battery ◆Video output: SVGA ◆Remote: Ethernet 10/100 ◆For inquiries, please contact us at the following: Tokyo Headquarters: TEL: 03-3221-7531 Osaka Branch: TEL: 06-6885-6201 Email: sales@matech.co.jp

• Ultrasonic Oscillator
• Image Processing Equipment

● The latest ultrasonic technology phased array system is now available in a portable type with a built-in battery! ● It can be easily carried to the field, significantly expanding its range of applications. ● Experience the user-friendly setup screen and the high-speed response waveform display on the actual device. ● The Focal Law has a high resolution of up to 2048. ● In addition to the standard equidistant focus, you can also select constant depth focus and constant Y distance focus. ● High power with an applied voltage of 200V. ● It has a data memory capacity of 40GB, allowing for data analysis even as a standalone unit.

• Ultrasonic Oscillator
• Image Processing Equipment
• Other measurement, recording and measuring instruments

This is an efficient optical inspection device specifically developed for the inspection of pipes and pipe welds. The autofocus camera continuously rotates, providing remarkably clear image data. Through digital processing of speed and rotation position, it delivers highly reproducible data. 【Features】 ● Two cameras mounted on one system ● 10x optical zoom ● Autofocus (manual operation possible) ● Ultra-high brightness LED lighting ● Low-speed rotation possible (0.1°/second) ● High-speed rotation: 4 seconds per rotation ● Variable rotation speed ● Excellent lighting layout design

• Other measurement, recording and measuring instruments

For inquiries, please contact us at the following: Tokyo Headquarters: TEL: 03-3221-7531 Osaka Branch: TEL: 06-6885-6201

• Image Processing Equipment
• Flaw detection testing

□■ Global Technology Award Winning Product ■□ High-resolution computer tomography (CT) has become a powerful inspection tool with a wide range of applications in quality control for electronic components and more. Tomography images are created by rotating the object being inspected within an X-ray beam. The data includes positional information of the object and information about the object's absorption density, allowing for the reconstruction of three-dimensional data. 【Features】 ◆ Depending on the dimensions and materials of the inspected object, the resolution can be a few microns or sub-micron. ◆ Any internal changes, density variations, or voids within the material are visualized, and distance measurements and volumes can be assessed. ◆ Once the full data from the 3D CT is collected, various analyses (slice images, arbitrary cross-sections, tone displays, magnified views, 3D measurements, etc.) become possible.

• Testing Equipment and Devices
• Radiation detector
• Image Processing Equipment

● Visual inspection for heat exchangers/steam generators ● Has the necessary hardness and a flexible bellows mechanism ● Equipped with high-performance video and high-brightness LED lighting ● Eliminates fragile fiberglass ● The 25-lumen light achieves sufficient brightness for an inner diameter of 100mm in turbo mode ● The 100° and 60° field of view can be used for a wide range of inspection applications ● Color display and high brightness performance eliminate noise issues! <DE2.4> With a thickness of only 2.4mm, the DE2.4 can navigate through narrow tubes such as those in heat exchangers and steam generators. Developed as the world's thinnest and only flat scope for this application, it enables inspections. 【Resolution】250,000 pixels / 330 scan lines <DE4.0> Offers higher resolution, with focus adjustment and field direction adjustment (±30°). 【Resolution】380,000 pixels / 460 scan lines

• Image Processing Equipment

The crack depth gauge RMG4015 is a tool for measuring the crack depth in conductive materials. 【Applicable to conductive materials such as iron, steel, stainless steel, copper, aluminum, and others】 【Features】 ● Measures the depth of cracks located between the measuring pins ● Not affected by the width of the crack ● The body is designed to be shock-resistant ● The keyboard has a waterproof structure ● The probe pins are detachable and replaceable ● Operates for 8.5 hours using two AA batteries ● Measurement range: 0 to 99.9 mm 【Probe Selection】 ◆ Standard Probe RMSQ: Ideal for non-magnetic materials ◆ Parallel 90° Probe RMSL: Comes with a guide convenient for curved surfaces ◆ Inclination Probe: Capable of measuring the angle of inclination 【Contact Pins: 3 Types】 ◆ Standard Pin: General-purpose type with a spring ◆ Needle Tip Pin: Can penetrate and measure even with a non-conductive coating ◆ Twist Pin: Twists 90° when pressed, making strong contact

• Image Processing Equipment
• Other measurement, recording and measuring instruments

◆Built-in data logger (up to 3850 points) ◆RS232 output ◆Calibration selection available for easy operation to high-precision measurement, even on unknown film thickness ◆Upper and lower limit alarm setting function ◆Calculation functions, number of measurement points, maximum, minimum, average, standard deviation ◆Offset function ◆Wide variety of probes Choose from a rich variety, from small microprobes to ZP probes for thick materials. ◆Measurement range: 0 to 12500μm (up to 20mm with NEW probe) ◆Measurement accuracy: Single pole probe, 1%±1μm for 100μm or less, 1.3%±1μm for over 100μm ◆Dimensions: W83×H151×D35mm, 300g Power: Two AA batteries, 26 hours of use ◆For inquiries, please contact us at the following: Tokyo Headquarters: TEL: 03-3221-7531 Osaka Branch: TEL: 06-6885-6201 Email: sales@matech.co.jp

• Coating thickness gauge

Ultrasound is generated within the material through electromagnetic induction, so no contact medium is required. Non-contact is possible from the coating film. 【Features】 ◆ SH wave probe adopted ◆ No coupling agent required ◆ Less affected by surface conditions ◆ 2000 data memory ◆ Data can be transferred to a PC via USB ◆ Correlation process analysis of signals is possible

• Distance measuring device

The pencil-type ultrasonic thickness gauge is a compact ultrasonic thickness gauge weighing only 55g. 【Features】 ◆ Operates from -30℃ to +55℃ ◆ Integrated probe (replaceable) ◆ Compact and lightweight at 55g ◆ Built-in nickel-hydrogen battery ◆ Digital circuit ◆ AC power/charging connector included ◆ Easy to operate ◆ High durability probe (only for 1207C) A1207: For thin materials 0.8 to 35mm A1207C: For thick materials 10 to 200mm available in the lineup!

• Image Processing Equipment
• Other measurement, recording and measuring instruments