Parker TAIYO List of Products and Services

In response to customer feedback, we have developed the drive unit section that was set with our Atsukan servo actuator as an independent unit. In addition to the existing small to medium flow servo units (1.1cc, 3.5cc, 11cc), we have now added larger flow servo units (19cc, 30cc, 40cc, 60cc) to our lineup. The addition of the large servo units enables high-speed operation at high thrust. Despite their size, they offer excellent energy efficiency (operating energy efficiency is 85-95%). They can be easily mounted on hydraulic actuators equipped with various length sensors and load sensors. Being hybrid, they use a small amount of operating oil, making them environmentally friendly servo units.

The Clamp Unit HY CLAMP LIGHT "JEH/JEA Series" adopts an embedded magnetic proximity switch with a focus on ease of use. It has been developed in response to the demands of machine tool and fixture manufacturers for a more compact body shape. Our company responds to the diverse needs of users of hydraulic and pneumatic equipment for labor-saving and rationalization with our technical expertise and a wide range of products.

The "TCM Series" cartridge valve system, designed for high pressure ranges, is a cartridge valve system with a long track record at Parker. The cartridge valve system is compact yet capable of handling high pressure ranges. It allows for reduced system maintenance time during valve replacement operations. A wide variety of high-performance cartridge valves are available, enabling a comprehensive hydraulic system solution.

Parker's LSHT (Low Speed High Torque) torque motor is a compact hydraulic motor that excels in low-speed rotation with high torque.

Despite its compact size, it achieves high output from the hydraulic rotary actuator and operates solely on 100V electrical wiring. This eliminates the need for hydraulic circuit design and piping work, allowing for a reduction in labor hours.

It is a hydraulic unit + integrated hydraulic actuator with hydraulic cylinder. It achieves high output, compactness, lightweight, and ease of use!

The "160S-1 series" thin hydraulic cylinder rated at 16MPa has added a variation with a "direct port specification" that allows for further compactness of the device by omitting piping space. Three types of piping methods are available: rod side, head side, and foot type, allowing for selection as needed. This also contributes to improved maintainability.

The highly praised D1VW series hydraulic solenoid valves now have new connection methods added, including Deutsch connectors and conduit types. In addition to providing hydraulic solenoid valves, we also offer basic hydraulic circuit modules as a set. By selecting a basic circuit module, it is possible to easily obtain a hydraulic valve unit. The basic circuit includes speed control, output control, and intermediate stop modules.

- This is a compact air-oil cooler with high heat exchange efficiency. - It accommodates large flow rates with a large diameter port size. - Despite its small size, it is equipped with a powerful fan that delivers higher cooling capacity. - It is also available with an optional thermostat.

We will customize the air oil cooler with a long-standing track record from Parker for domestic specifications and offer it as the "LC Series."

We have added a new variation of the "160S-1 series" thin hydraulic cylinder rated at 16MPa, featuring a "head-side cushion specification" that further contributes to increased speed. The additional cushion mechanism reduces shock during stopping. The built-in cushion valve allows for adjustment of the cushion according to usage conditions. The installation space has also been kept to just an additional 20mm compared to the standard type. For more details, please visit our website. https://www.taiyo-ltd.co.jp

The movement towards motor efficiency is spreading worldwide, and in Japan, high-efficiency regulations based on the Top Runner standards began in 2015. Our company has also added the NHU2 series of compact hydraulic units equipped with IE3 motors that comply with the Top Runner standards to our lineup. For more details, please visit our website. https://www.taiyo-ltd.co.jp

21MPa specification hydraulic cylinder compatible with lightweight, compact, and high-speed devices.

A hydraulic cylinder with a specification of 21MPa that contributes to the lightweight and compact design of the device.

The 16MPa double-acting compact hydraulic cylinder "160ST-1 Series" is a tie-rod type compact hydraulic cylinder that has some compatibility with TAIYO's thin hydraulic cylinder "160S-1 Series," which has a strong track record. It achieves space-saving similar to that of thin cylinders while also being lighter than thin cylinders. Additionally, we have made available large diameters ranging from φ100 to φ250, which were not present in the ST type of the "160S-1 Series."

The "HQS2 Series" thin hydraulic cylinder uses aluminum for the cylinder body, achieving weight reduction. It offers a wide variety of options, including inner diameters from φ20 to φ100, four types of support configurations, single rod, double rod, standard type, switch set, general-purpose type, and specifications for cutting materials, among others.

The 21MPa specification position sensing hydraulic cylinder "PTT-2B series" is developed based on the general-purpose 21MPa specification hydraulic cylinder "210C-2 series," following the 7/14MPa specification position sensing hydraulic cylinder "PTN/PTH-1B series." It employs the same magnetostrictive sensor as the "PTN/PTH-1B series," enabling high-precision detection of absolute positions. There is no need for a switch for origin setting, and no correction is required.

We have standardized the position sensing cylinders "PTN-1B, PTH-1B series," which enable continuous position detection accuracy. The cylinder body is based on our long-established and highly varied hydraulic cylinder 70/140H-8 series, equipped with a CE-mark compliant position sensor that offers high heat resistance and seismic resistance (protection structure IP67).

We have traditionally offered a wide variety of thin hydraulic cylinders, and to better meet market demands, we have added small diameters of φ20 and φ25, as well as a large diameter of φ100, to our lightweight and long-lasting thin hydraulic cylinder "100S-1 series."

The hydraulic unit system "HPU Series" is a custom-made hydraulic unit system provided by our company to meet the specifications of our customers. Maintenance parts can be procured not only domestically but also through the global Parker network.

The 16MPa double-acting hydraulic cylinder "160H-1 Series" has been designed to pursue significant weight reduction and compactness compared to our "140H-8 Series." A switch set has been standardized for all inner diameters from φ32 to φ160, and the adoption of floating cushions has improved the startup performance. The rod series includes A and B rods as standard, and a wide range of related components such as support brackets, end fittings, and dust covers are also readily available.

The "100Z-1 Series" round small-diameter hydraulic cylinder with a 10MPa specification has the same dimensions as the old 7MPa specification hydraulic cylinder "70Z-1 Series," but it has significantly improved operability during startup by adopting a float ring that incorporates a check valve mechanism in the cushion section. Additionally, the length of the cushion ring and the shape of related components have been reviewed to enhance the energy absorption capacity of the cushion. The adoption of a newly designed cushion valve has also made cushion adjustment easier, and furthermore, the nominal pressure has been increased to 10MPa. The expansion of the manufacturing stroke range for standard products and the use of hydrogenated nitrile rubber seals in sliding parts such as the gland make this a compact hydraulic cylinder that matches a wide range of operating environments.

The 10MPa tie rod type hydraulic cylinder "100H-2 series" has been developed following the ISO standards, succeeding the 16MPa hydraulic cylinder "160H-1 series" and the thin type hydraulic cylinder "100S-1 series." This 100H-2 hydraulic cylinder has been designed to achieve significant weight reduction and compactness compared to our 70H-8 series.

Our space-saving hydraulic cylinder has been enhanced with the addition of the 21MPa specification thin hydraulic cylinder "210S-1 Series." This "210S-1 Series" is an optimal compact cylinder for situations where high pressure power is required in a small installation space. The 21MPa specification thin hydraulic cylinder is introduced with the industry's smallest mounting dimensions. Additionally, a switch set equipped with a magnetic proximity switch is also available as standard. Furthermore, since the mounting pitch is the same as our "100S-1 Series" and "160S-1 Series," changing the pressure due to product modifications can be done easily. With the introduction of the "210S-1 Series," TAIYO's space-saving hydraulic cylinders now offer a lineup of five series ranging from 3.5MPa to 21MPa, allowing for better series selection based on the customer's usage environment.

We have completed the advanced energy-saving intelligent hydraulic control unit "Atsukan Servo/PQCS2 Series," which combines a direct drive hydraulic servo with excellent economic efficiency and a cylinder equipped with load and length measurement sensors, in an environment without control valves and piping. The data from the built-in position sensor and load sensor in the cylinder enables arbitrary load and positioning control. (The cylinder with load sensor has been patented in the United States, Japan, and eight European countries.) Positioning accuracy: ±0.02mm Load accuracy: ±3% High thrust with continuous holding capability.

The "PSR-1A series" thin hydraulic cylinder with a specification of 16MPa for position sensing is a product that incorporates a sensor capable of continuously detecting the piston position into TAIYO's thin hydraulic cylinder "160S-1 series." The sensor adopts a sleeve-type design, allowing for high-precision absolute position detection. This product is suitable for applications requiring position accuracy feedback signals in closed control systems, such as continuous position detection and automatic control machinery, which are difficult to achieve with magnetic proximity switches.

The "H8BT1 series" high-temperature specification tie rod hydraulic cylinder, rated at 14MPa, is a heat-resistant hydraulic cylinder that can be used at ambient temperatures up to 150°C. The switch set can accommodate up to 130°C by incorporating the heat-resistant switch SW013. With cylinder inner diameters ranging from φ40 to φ80, and a variety of support types including SD, LA, LC, FK, FY, FZ, FZ, FC, FD, CA, CB, TA, and TC, we offer a wide selection. Accessories such as end fittings and dust covers are also available, allowing for customization to meet customer needs.

Our company's unique press-fitting management system, "Atsukan PQC Series," has a history of over 30 years and boasts more than 3,000 successful installations. Developed by a team of assembly machine professionals, it follows the AC servo nut runner designed to streamline screw tightening operations and ensure quality. This system consolidates the know-how of the press-fitting process, one of the assembly tasks, and is built on a highly reliable hydraulic cylinder.

The hydraulic and pneumatic cylinders, as well as various hydraulic and pneumatic equipment handled by Parker TAIYO, are highly durable. However, due to the usage environment and the passage of time, while the main body may remain intact, wear parts such as seals in the sliding sections will wear out and need to be replaced. Therefore, we have prepared MRO parts such as packing and seals for overhauls, maintenance, and servicing. Additionally, we also offer maintenance and service kits for diaphragm pumps and valves handled by Parker TAIYO, in addition to cylinders.

The combination of the booster (Newma Lock) and the fastening device allows for a high output of 1.5 to 44.1 kN to be obtained as needed. The booster (Newma Lock) is available in two types: direct pressure type and pre-pressure type. It accommodates a wide range of operations from short strokes to long strokes of the actuator.

Parker's variable displacement axial piston pump is a compact hydraulic pump with low noise and high responsiveness.

The 15MPa double-acting two-stage hydraulic cylinder "150HD-1" is a hydraulic cylinder that contributes to space-saving in the die-casting mold industry. By reducing the internal volume of the cylinder, it decreases hydraulic flow and allows for a more compact hydraulic system. Additionally, convenient couplings and joints for connecting to equipment are also provided.

We have added the new NG10 size D3VW series to the well-received D1VW series of hydraulic solenoid valves.

General-purpose hydraulic cylinder with an inner diameter, support brackets, and accessories, featuring a wide range of related parts and equipped with a high-performance cushion as standard, designed for 7/14 MPa specifications.

Our company has traditionally offered a wide variety of thin hydraulic cylinders, and to better meet market demands, we have newly added direct port specifications and cushioned options to the durable and long-lasting thin hydraulic cylinder "160S-1 series."