アピア List of Products and Services

We would like to introduce the "Diamond Cleaning System" offered by Apia Co., Ltd. This revolutionary system can remove dirt from coated floors through cleaning and further restore them by polishing. By reducing waste generated during repainting and the use of strong alkaline cleaning agents during maintenance, we can eliminate the environmental burden. 【Benefits】 ■ Extension of repainting cycle ■ Consideration for the environment ■ Cost reduction ■ Maintenance of aesthetics *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

We would like to introduce the "Diamond Cleaning System" offered by Apia Co., Ltd. This revolutionary system can remove dirt from floor coatings through cleaning and further restore them by polishing. By using diamonds of different sizes for each type of pad, it allows for repairs and maintains a high gloss even with regular cleaning. 【Benefits】 ■ Extension of repainting cycle ■ Consideration for the environment ■ Cost reduction ■ Maintenance of aesthetics *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

We would like to introduce the "Diamond Cleaning System" offered by Apia Co., Ltd. The flexible diamond cleaning pad effectively removes dirt and can be applied to uneven surfaces. By extending the repainting cycle and reducing waste, it leads to cost savings. 【Benefits】 ■ Extension of repainting cycle ■ Consideration for the environment ■ Cost reduction ■ Maintenance of aesthetics *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

We would like to introduce a case of surface reinforcement work and polishing specifications carried out at a certain training center in Kyoto Prefecture. The surface reinforcement work was conducted over three days, followed by polishing work in five stages, resulting in a glossy finish. Our "Diamond Cleaning System" is a revolutionary system that can restore coated floors by removing dirt through cleaning and further polishing. 【Benefits】 ■ Extension of repainting cycle ■ Consideration for the environment ■ Cost reduction ■ Maintenance of aesthetics *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

We would like to introduce the "Diamond Cleaning System" offered by Apia Co., Ltd. This revolutionary system can remove dirt from flooring through cleaning and further restore it by polishing. By performing continuous maintenance, it is possible to suppress the accumulation of dirt and the progression of deterioration, which ultimately leads to an extension of the repainting period. 【Benefits】 ■ Extension of repainting cycle ■ Consideration for the environment ■ Cost reduction ■ Maintenance of aesthetics *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

We would like to introduce the "Diamond Cleaning System" offered by Apia Co., Ltd. This revolutionary system can restore surfaces by removing dirt through cleaning and further polishing. With the highly flexible diamond cleaning pads, it effectively removes dirt and can be applied to uneven surfaces. 【Benefits】 ■ Extension of repainting cycle ■ Consideration for the environment ■ Cost reduction ■ Maintenance of aesthetics *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

We would like to introduce a case of construction using hard diamond polishing specifications for concrete surface reinforcement in Hyogo Prefecture. By effectively removing dirt with a flexible diamond cleaning pad, it can also be applied to uneven surfaces. By using diamonds of different sizes for each type of pad, restoration can be achieved, and a high gloss can be maintained even with regular cleaning. 【Benefits】 ■ Extension of repainting cycle ■ Consideration for the environment ■ Cost reduction ■ Maintenance of aesthetics *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

We would like to introduce a case of construction using a hard diamond polishing specification for concrete surface enhancement in Shiga Prefecture. This revolutionary system allows for the removal of dirt from the floor through cleaning and further restoration by polishing. By performing continuous maintenance, it is possible to suppress the accumulation of dirt and the progression of deterioration, ultimately leading to an extension of the repainting period. 【Benefits】 ■ Extension of repainting cycle ■ Consideration for the environment ■ Cost reduction ■ Maintenance of aesthetics *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

We would like to introduce the "Diamond Cleaning System" offered by Apia Co., Ltd. This groundbreaking system can restore surfaces by removing dirt through cleaning and further polishing. With the highly flexible diamond cleaning pads, it effectively removes dirt and can be applied to uneven surfaces. 【Benefits】 ■ Extension of repainting cycle ■ Consideration for the environment ■ Cost reduction ■ Maintenance of aesthetics *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

At Apia Co., Ltd., we offer oil stain removal from concrete floors. During the construction of a warehouse, oil spilled from a rented work vehicle, resulting in oil stains on the concrete floor. Common issues such as these, where oil stains cannot be removed by regular cleaning, can be entrusted to us. We will remove the stains with our technology. Based on our extensive track record, we will respond quickly. Please consult with us before making a complaint. 【Examples of Services】 ■ Oil stains ■ Mold removal ■ Warehouse floor coating ■ Linoleum flooring ■ Tar removal *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

Here is a case study of concrete floor oil removal spin-back cleaning work conducted at a certain food factory in Gifu Prefecture. High-pressure cleaning work on a concrete floor that had a large amount of oil spilled. While cleaning, wastewater was collected with a vacuum, and the cleaning wastewater was temporarily stored in a drum, where it was neutralized with detergent before disposal. 【Benefits】 ■ Extension of repainting cycle ■ Consideration for the environment ■ Cost reduction ■ Maintenance of aesthetics *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

We would like to introduce the "Diamond Cleaning System" offered by Apia Co., Ltd. This revolutionary system can restore flooring by removing dirt through cleaning and further polishing it. By extending the repainting cycle and reducing waste, it leads to cost savings. 【Benefits】 ■ Extension of repainting cycle ■ Consideration for the environment ■ Cost reduction ■ Maintenance of aesthetics *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

We would like to introduce the "Diamond Cleaning System" offered by Apia Co., Ltd. This revolutionary system can restore flooring by removing dirt through cleaning and further polishing. By using diamonds of different sizes for each type of pad, it allows for repairs and maintains a high level of gloss even during regular cleaning. 【Benefits】 ■ Extension of repainting cycle ■ Consideration for the environment ■ Cost reduction ■ Maintenance of aesthetics *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

We would like to introduce the "Diamond Cleaning System" offered by Apia Co., Ltd. This revolutionary system allows for the removal of dirt from coated floors through cleaning and further restoration by polishing. By using diamonds of different sizes for each type of pad, it enables repairs and maintains a high gloss even with regular cleaning. 【Benefits】 ■ Extension of repainting cycle ■ Consideration for the environment ■ Cost reduction ■ Maintenance of aesthetics *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

We would like to introduce the "Diamond Cleaning System" offered by Apia Co., Ltd. This revolutionary system can remove dirt from coated floors through washing and further restore them by polishing. With the highly flexible diamond cleaning pads, dirt can be effectively removed, and it can also be applied to uneven surfaces. 【Benefits】 ■ Extension of repainting cycle ■ Consideration for the environment ■ Cost reduction ■ Maintenance of aesthetics *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

We would like to introduce the "Diamond Cleaning System" offered by Apia Co., Ltd. This revolutionary system can remove dirt from coated floors through cleaning and further restore them by polishing. By extending the repainting cycle and reducing waste, it leads to cost savings. 【Benefits】 ■ Extension of repainting cycle ■ Consideration for the environment ■ Cost reduction ■ Maintenance of aesthetics *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

We would like to introduce the "Diamond Cleaning System" offered by Apia Co., Ltd. This revolutionary system can remove dirt from floor coatings through cleaning and further restore them by polishing. By conducting continuous maintenance, it is possible to suppress the accumulation of dirt and the progression of deterioration, ultimately leading to an extension of the repainting period. 【Benefits】 ■ Extension of repainting cycle ■ Consideration for the environment ■ Cost reduction ■ Maintenance of aesthetics *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

At Apia Co., Ltd., we perform low-odor, mold sterilization cleaning. Not only is it low in odor and provides a good finish, but it can also significantly delay the reappearance of mold on surfaces compared to painting and cleaning. We determine the dilution ratio of the chemicals based on the progress of the mold and the number of years, and apply the chemicals using a dedicated mop, brush, or specialized sprayer. You can trust us to handle even the strong mold that has proliferated in your factory. 【Main Components of Mold Removal Agent】 ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

We would like to introduce a case of mold removal work conducted on ceiling gypsum board at a certain supermarket in Aichi Prefecture. Our system sterilizes even the mold spores inside the board, significantly delaying the visibility of mold. The mold had spread throughout the ceiling, but after the work, it became remarkably beautiful. 【Main Components of the Mold Removal Agent】 ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

We would like to introduce a case of mold removal work carried out on ceiling gypsum board at a certain supermarket in Aichi Prefecture. The main reason why commercially available mold removers cannot kill mold is that they cannot break down the partition, preventing the detergent (disinfecting component) from reaching the mold spores. With our original special chemicals, the area was thoroughly cleaned. Our system allows the chemicals to penetrate the ceiling board, disinfecting and cleaning the mold inside the board. 【Main Components of Mold Removal Agent】 ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

We would like to introduce a case of mold removal work carried out on the ceiling boards around the air conditioning at a certain hospital in Nara Prefecture. Our original mold removal agent has a low odor, allowing for safe completion of the work even in hospitals. Not only does it have a minimal smell and a good finish, but it can also significantly delay the reappearance of mold on surfaces compared to painting and cleaning. [Main Components of the Mold Removal Agent] ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

At Apia Co., Ltd., we conduct low-odor mold disinfection cleaning. We impregnate the ceiling boards with chemicals to disinfect and clean the mold inside the boards. Not only is there minimal odor and a good finish, but it also significantly delays the reappearance of mold on the surface compared to painting and cleaning. By applying ARA to the mold, the protein-decomposing components dissolve the partition, and the disinfecting components break down the fungal spores, allowing for complete disinfection. [Main Components of Mold Removal Agent] ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

We would like to introduce the mold removal service offered by Apia Co., Ltd. By applying ARA to the mold, the protein-decomposing components dissolve the partitions, and the antibacterial components completely eliminate the bacteria by breaking down the fungal spores. It has a low odor and provides a good finish, and compared to paint and cleaning, it can significantly delay the reappearance of mold on the surface. 【Main Components of the Mold Removal Agent】 ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

We would like to introduce the mold removal service offered by Apia Co., Ltd. The main reason why commercial mold removers cannot kill mold is that they cannot break down the septum, preventing the detergent (disinfectant component) from reaching the fungal spores. ARA has both disinfecting effects and the ability to break down oils and proteins. By applying ARA to the mold, the protein-decomposing components dissolve the septum, allowing the disinfecting components to break down the fungal spores, achieving complete sterilization. [Main Ingredients of Mold Removal Agent] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

At Apia Co., Ltd., we offer low-odor mold sterilization cleaning services. In this process, we will cover the entire area, and based on the progress of the mold and the number of years, we will determine the dilution ratio of the chemicals and apply them using a specialized mop, brush, or spray applicator. Not only is the finish good with minimal odor, but it can also significantly delay the reappearance of mold on the surface compared to painting or cleaning. [Main Components of Mold Removal Agent] ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

At Apia Co., Ltd., we perform low-odor, mold sterilization cleaning. We impregnate the ceiling boards with chemicals to sterilize and clean the mold inside the boards. Not only is there minimal odor and a good finish, but it also significantly delays the reappearance of mold on the surface compared to painting and cleaning. The dilution ratio of the chemicals is determined based on the progress of the mold and the number of years, and the chemicals are applied using a dedicated mop, brush, or specialized sprayer. 【Main Components of Mold Removal Agent】 ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

At Apia Co., Ltd., we impregnate ceiling boards with chemicals to disinfect and clean the mold inside the boards. The dilution ratio of the chemicals is determined based on the extent of mold progression and the number of years, and the chemicals are applied using a specialized mop, brush, or spray device. Since the chemicals are much safer compared to sodium hypochlorite and paint, they have a low odor and do not affect business operations. [Main Components of Mold Removal Agent] ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

At Apia Co., Ltd., we conduct low-odor, mold sterilization cleaning. We impregnate the ceiling boards with chemicals to sterilize and clean the mold inside the boards. Not only is the odor minimal and the finish excellent, but it also significantly delays the reappearance of mold on the surface compared to painting and cleaning. Since we use very safe chemicals compared to sodium hypochlorite and paint, there is little odor, and it does not affect the opening of your business. 【Main Components of Mold Removal Agent】 ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

At Apia Co., Ltd., we impregnate ceiling boards with chemicals to disinfect and clean even the mold inside the boards. We also thoroughly remove mold from the felt-like fabric of air conditioning vents. The dilution ratio of the chemicals is determined based on the extent of mold progression and the number of years, and the chemicals are applied using a specialized mop, brush, or spray device. 【Main Components of Mold Removal Agent】 ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

At Apia Co., Ltd., we conduct low-odor mold disinfection cleaning. After applying our original mold remover, we perform a low-pressure water flushing cleaning operation. By applying ARA to the mold, the protein-decomposing components dissolve the partitions, and the disinfecting components completely sterilize by breaking down the fungal nuclei. Not only is it low-odor and provides a good finish, but it can also significantly delay the reappearance of mold on the surface compared to painting and cleaning. [Main Components of Mold Remover] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactants (non-ionic) *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

We would like to introduce a case of mold removal work on the ceiling and wall surfaces at a certain factory in Gifu Prefecture. Mold that had adhered to the ceiling and walls was removed. It took three days to completely eliminate the stains. Our system impregnates the ceiling boards with a chemical solution that disinfects and cleans even the mold inside the boards. 【Main Components of the Mold Removal Agent】 ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

We would like to introduce the mold removal service offered by Apia Co., Ltd. The main reason why commercial mold removers cannot kill mold is that they cannot break down the septum, preventing the detergent (disinfectant component) from reaching the fungal spores. ARA has disinfecting properties as well as the ability to break down oils and proteins. By applying ARA to the mold, the protein-decomposing components dissolve the septum, allowing the disinfectant components to break down the fungal spores, achieving complete sterilization. [Main Components of Mold Removal Agent] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactants (non-ionic) *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

At Apia Co., Ltd., we conduct low-odor, mold sterilization cleaning. We impregnate the ceiling boards with chemicals to sterilize and clean the mold inside the boards. Not only is there minimal odor and a good finish, but it also significantly delays the reappearance of mold on the surface compared to painting and cleaning. Since we use very safe chemicals compared to sodium hypochlorite and paint, there is little odor, and it does not affect the opening of the business. 【Main Components of Mold Removal Agent】 ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools

We would like to introduce our "Mold Disinfection and Cleaning" service. In this process, we will cover the entire area with protective measures. Depending on the extent of mold growth and the number of years, we will determine the dilution ratio of the chemicals and apply them using a specialized mop, brush, or spray device. The chemicals used are very safe compared to sodium hypochlorite and paint, resulting in minimal odor and no impact on the opening of the business. [Main Components of the Mold Removal Agent] ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactants (Non-ionic) *For more details, please download the PDF or feel free to contact us.

• Other contract services

We would like to introduce our "Mold Disinfection and Cleaning" service. We use chemicals that are much safer compared to sodium hypochlorite and paints, resulting in minimal odor and no impact on your business operations. After 20 to 30 minutes, black mold will begin to turn brown. Once it turns brown, the mold spores are almost completely disinfected. We recommend taking prompt action as soon as mold becomes noticeable. 【Main Components of the Mold Removal Agent】 ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactants (Non-ionic) *For more details, please download the PDF or feel free to contact us.

• Other contract services

We would like to introduce our "Mold Sterilization Cleaning" service. Our system impregnates the ceiling boards with a chemical solution, allowing for sterilization and cleaning of mold even within the board itself. Not only does it have a low odor and excellent finish, but it can also significantly delay the reappearance of mold on the surface compared to painting and cleaning. [Main Components of the Mold Removal Agent] ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

• Other contract services

We would like to introduce our "Mold Sterilization Cleaning" service. Since we sterilize the mold spores inside the board, it is possible to significantly delay the onset of visible mold. If painting is done without addressing the root causes of mold growth, it can end up sealing in the mold. Therefore, we recommend using our system before painting. [Main Components of the Mold Removal Agent] ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

• Other contract services

In this construction, we will cover the products with full protection. Depending on the progress and the number of years, a chemical will be applied. After 20 to 30 minutes, the black mold will turn brown. Once it turns brown, the mold spores are almost completely sterilized. Once sterilization is complete, we will wipe away the brown areas. At that time, old mold that has been present for many years may have stained the board, and some brown discoloration may remain. [Main components of the mold removal agent] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

• Other contract services

Our system impregnates the ceiling boards with chemicals and performs sterilization and cleaning of the mold inside the boards. If painting is done in a situation where the root causes of mold growth cannot be resolved, it will effectively seal the mold. The sealed mold will soon reappear on the surface, and the mold will become noticeable again quickly. Therefore, we recommend using our system before painting. [Main Components of the Mold Removal Agent] ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

• Other contract services

Typically, even if you clean thoroughly, you cannot eliminate the mold spores inside the board, so mold will soon become noticeable. However, our system sterilizes even the mold spores within the board, significantly delaying the onset of visible mold. Additionally, if you paint over the situation where the root causes of mold growth cannot be resolved, it will effectively seal in the mold. We recommend using our system before painting. 【Main Components of the Mold Removal Agent】 ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

• Other contract services

Our system impregnates the ceiling boards with a chemical solution that disinfects and cleans even the mold inside the boards. By applying ARA, which has disinfecting effects and the ability to break down oils and proteins, to the mold, the protein-decomposing components dissolve the partition, and the disinfecting components break down the fungal nuclei, achieving complete sterilization. Please feel free to contact us when you need our services. 【Main Components of the Mold Removal Agent】 ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

• Other contract services

In this construction, we will provide full surface protection for the product. We will impregnate the ceiling boards with a chemical to disinfect and clean the mold inside the boards. Not only does it have a low odor and a good finish, but it can also significantly delay the appearance of mold on the surface compared to paint and cleaning. Please feel free to contact us when you need our services. [Main components of the mold removal agent] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

• Other contract services

Our system sterilizes even the mold spores inside the board, significantly delaying the visibility of mold. The dilution ratio of the chemicals is determined based on the progress of the mold and the number of years, and the chemicals are applied using a dedicated mop, brush, or spray. Since the chemicals are much safer compared to sodium hypochlorite and paint, they have a low odor and will not affect the opening of the business. [Main components of the mold removal agent] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

• Other contract services

Our system sterilizes even the mold spores within the board, significantly delaying the noticeable appearance of mold. It is said that the mold barrier is made of protein and is difficult to completely decompose. ARA has sterilizing effects as well as oil and protein decomposition effects. By applying ARA to the mold, the protein-decomposing components dissolve the barrier, and the sterilizing components break down the fungal nuclei, allowing for complete sterilization. [Main components of the mold remover] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

• Other contract services

Our system impregnates the ceiling boards with chemicals to disinfect and clean the mold inside the boards. In this construction, we will fully protect the product. Depending on the progress of the mold and the number of years, we will determine the dilution ratio of the chemicals and apply them using a special mop, brush, or dedicated sprayer. Since the chemicals only react to mold, there is a high possibility that dirt that is not mold, such as dust or burns, will not be cleaned. [Main components of the mold removal agent] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

• Other contract services