アピア List of Products and Services

At Apia Co., Ltd., we carry out special cleaning and washing work. We can offer solutions that fundamentally break down and remove "dirt" that cannot be completely eliminated by regular cleaning tasks. "Wait, can you really do that?" We often receive such surprised comments. Please feel free to consult with us at least once. 【List of Apia's Special Cleaning and Washing Works】 ■ Mold Removal Work ■ Stainless Steel Polishing and Cleaning Work (rust, silica, etc.) ■ Floor Coating Polishing and Restoration Work ■ Glass and Acrylic Polishing Work ■ Other Works (ducts, piping, smoking rooms (tar), granite, marble, porcelain tiles, interlocking) Additionally, the materials available for viewing in the [PDF Download] below include our "Mold Removal Work," which uses agents that can remove mold down to the core, as well as our unique methods for removing dirt, and we also introduce "Stainless Steel Polishing and Cleaning Work" and "Glass and Acrylic Polishing Work." We have included photos of the conditions before and after the work, so please take a look. *For more details, please feel free to contact us.

Our system sterilizes even the mold spores inside the board, significantly delaying the onset of visible mold. Additionally, if painting is done in a situation where the root causes of mold growth cannot be resolved, it will effectively seal the mold. The sealed mold will quickly resurface, causing visible mold to appear again sooner. We recommend using our system before painting. [Main Components of the Mold Removal Agent] ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

In this construction, we will provide full protective measures for the products. The dilution ratio of the chemicals will be determined based on the progress of mold and the number of years, and the chemicals will be applied using a dedicated mop, brush, or spray device. Since the chemicals are much safer compared to sodium hypochlorite and paint, they have little odor and will not affect the opening. After 20 to 30 minutes, the black mold will change to brown. When it turns brown, the mold spores are almost completely sterilized. [Main components of the mold removal agent] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

Our system impregnates the ceiling boards with a chemical that disinfects and cleans even the mold inside the boards. It has a low odor and provides a good finish, and it can significantly delay the reappearance of mold on the surface compared to painting and cleaning. Since we use a chemical that only reacts to mold, there is a high possibility that dirt that is not mold, such as dust or soot, will not be cleaned. [Main Components of the Mold Removal Agent] ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

Our system sterilizes even the mold spores inside the board, significantly delaying the visibility of mold. The dilution ratio of the chemicals is determined based on the progress of the mold and the number of years, and the chemicals are applied using a dedicated mop, brush, or spray device. We will cover the entire area for protection. Since we use very safe chemicals compared to sodium hypochlorite and paint, there is minimal odor, and it will not affect the opening of the business. [Main components of the mold removal agent] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

In this construction, we will cover the products with full protection. Since the chemicals used are much safer compared to sodium hypochlorite and paint, there is little odor, and it will not affect the opening. Once the disinfection is complete, we will wipe off the brown areas. At that time, old mold that has been present for many years may have stained the board, and some brown color may remain. [Main components of the mold removal agent] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

Our system impregnates the ceiling boards with a chemical solution that disinfects and cleans even the mold inside the boards. It has minimal odor and provides excellent results, and compared to painting and cleaning, it can significantly delay the reappearance of mold on the surface. We recommend taking prompt action as soon as mold becomes noticeable. 【Main components of the mold removal agent】 ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

Our system sterilizes even the mold spores inside the board, significantly delaying the visibility of mold. Typically, even if you clean the surface through wiping or scrubbing, you cannot sterilize the mold spores inside the board, so mold becomes noticeable again quickly. Additionally, if you paint over a situation where the root cause of mold growth cannot be resolved, it will seal in the mold, so we recommend using our system before painting. [Main Components of the Mold Removal Agent] ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

In this construction work, we will provide full protection for the products. The dilution ratio of the chemicals will be determined based on the progress of mold and the number of years, and the chemicals will be applied using a dedicated mop, brush, or spray device. Since the chemicals only react to mold, there is a high possibility that they will not clean dirt that is not mold, such as dust or burns. [Main components of the mold removal agent] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

Our system impregnates the ceiling boards with chemicals to disinfect and clean the mold inside the boards. In this construction, we will fully protect the product. Depending on the progress of the mold and the number of years, we will determine the dilution ratio of the chemicals and apply them using a special mop, brush, or dedicated sprayer. Since the chemicals only react to mold, there is a high possibility that dirt that is not mold, such as dust or burns, will not be cleaned. [Main components of the mold removal agent] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

Our system sterilizes even the mold spores within the board, significantly delaying the noticeable appearance of mold. It is said that the mold barrier is made of protein and is difficult to completely decompose. ARA has sterilizing effects as well as oil and protein decomposition effects. By applying ARA to the mold, the protein-decomposing components dissolve the barrier, and the sterilizing components break down the fungal nuclei, allowing for complete sterilization. [Main components of the mold remover] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

Our system sterilizes even the mold spores inside the board, significantly delaying the visibility of mold. The dilution ratio of the chemicals is determined based on the progress of the mold and the number of years, and the chemicals are applied using a dedicated mop, brush, or spray. Since the chemicals are much safer compared to sodium hypochlorite and paint, they have a low odor and will not affect the opening of the business. [Main components of the mold removal agent] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

In this construction, we will provide full surface protection for the product. We will impregnate the ceiling boards with a chemical to disinfect and clean the mold inside the boards. Not only does it have a low odor and a good finish, but it can also significantly delay the appearance of mold on the surface compared to paint and cleaning. Please feel free to contact us when you need our services. [Main components of the mold removal agent] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

Our system impregnates the ceiling boards with a chemical solution that disinfects and cleans even the mold inside the boards. By applying ARA, which has disinfecting effects and the ability to break down oils and proteins, to the mold, the protein-decomposing components dissolve the partition, and the disinfecting components break down the fungal nuclei, achieving complete sterilization. Please feel free to contact us when you need our services. 【Main Components of the Mold Removal Agent】 ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

Typically, even if you clean thoroughly, you cannot eliminate the mold spores inside the board, so mold will soon become noticeable. However, our system sterilizes even the mold spores within the board, significantly delaying the onset of visible mold. Additionally, if you paint over the situation where the root causes of mold growth cannot be resolved, it will effectively seal in the mold. We recommend using our system before painting. 【Main Components of the Mold Removal Agent】 ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

Our system impregnates the ceiling boards with chemicals and performs sterilization and cleaning of the mold inside the boards. If painting is done in a situation where the root causes of mold growth cannot be resolved, it will effectively seal the mold. The sealed mold will soon reappear on the surface, and the mold will become noticeable again quickly. Therefore, we recommend using our system before painting. [Main Components of the Mold Removal Agent] ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

In this construction, we will cover the products with full protection. Depending on the progress and the number of years, a chemical will be applied. After 20 to 30 minutes, the black mold will turn brown. Once it turns brown, the mold spores are almost completely sterilized. Once sterilization is complete, we will wipe away the brown areas. At that time, old mold that has been present for many years may have stained the board, and some brown discoloration may remain. [Main components of the mold removal agent] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

We would like to introduce our "Mold Sterilization Cleaning" service. Since we sterilize the mold spores inside the board, it is possible to significantly delay the onset of visible mold. If painting is done without addressing the root causes of mold growth, it can end up sealing in the mold. Therefore, we recommend using our system before painting. [Main Components of the Mold Removal Agent] ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

We would like to introduce our "Mold Sterilization Cleaning" service. Our system impregnates the ceiling boards with a chemical solution, allowing for sterilization and cleaning of mold even within the board itself. Not only does it have a low odor and excellent finish, but it can also significantly delay the reappearance of mold on the surface compared to painting and cleaning. [Main Components of the Mold Removal Agent] ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

We would like to introduce our "Mold Disinfection and Cleaning" service. We use chemicals that are much safer compared to sodium hypochlorite and paints, resulting in minimal odor and no impact on your business operations. After 20 to 30 minutes, black mold will begin to turn brown. Once it turns brown, the mold spores are almost completely disinfected. We recommend taking prompt action as soon as mold becomes noticeable. 【Main Components of the Mold Removal Agent】 ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactants (Non-ionic) *For more details, please download the PDF or feel free to contact us.

We would like to introduce our "Mold Disinfection and Cleaning" service. In this process, we will cover the entire area with protective measures. Depending on the extent of mold growth and the number of years, we will determine the dilution ratio of the chemicals and apply them using a specialized mop, brush, or spray device. The chemicals used are very safe compared to sodium hypochlorite and paint, resulting in minimal odor and no impact on the opening of the business. [Main Components of the Mold Removal Agent] ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactants (Non-ionic) *For more details, please download the PDF or feel free to contact us.

At Apia Co., Ltd., we conduct low-odor, mold sterilization cleaning. We impregnate the ceiling boards with chemicals to sterilize and clean the mold inside the boards. Not only is there minimal odor and a good finish, but it also significantly delays the reappearance of mold on the surface compared to painting and cleaning. Since we use very safe chemicals compared to sodium hypochlorite and paint, there is little odor, and it does not affect the opening of the business. 【Main Components of Mold Removal Agent】 ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

We would like to introduce the mold removal service offered by Apia Co., Ltd. The main reason why commercial mold removers cannot kill mold is that they cannot break down the septum, preventing the detergent (disinfectant component) from reaching the fungal spores. ARA has disinfecting properties as well as the ability to break down oils and proteins. By applying ARA to the mold, the protein-decomposing components dissolve the septum, allowing the disinfectant components to break down the fungal spores, achieving complete sterilization. [Main Components of Mold Removal Agent] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactants (non-ionic) *For more details, please download the PDF or feel free to contact us.

We would like to introduce a case of mold removal work on the ceiling and wall surfaces at a certain factory in Gifu Prefecture. Mold that had adhered to the ceiling and walls was removed. It took three days to completely eliminate the stains. Our system impregnates the ceiling boards with a chemical solution that disinfects and cleans even the mold inside the boards. 【Main Components of the Mold Removal Agent】 ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

At Apia Co., Ltd., we conduct low-odor mold disinfection cleaning. After applying our original mold remover, we perform a low-pressure water flushing cleaning operation. By applying ARA to the mold, the protein-decomposing components dissolve the partitions, and the disinfecting components completely sterilize by breaking down the fungal nuclei. Not only is it low-odor and provides a good finish, but it can also significantly delay the reappearance of mold on the surface compared to painting and cleaning. [Main Components of Mold Remover] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactants (non-ionic) *For more details, please download the PDF or feel free to contact us.

At Apia Co., Ltd., we impregnate ceiling boards with chemicals to disinfect and clean even the mold inside the boards. We also thoroughly remove mold from the felt-like fabric of air conditioning vents. The dilution ratio of the chemicals is determined based on the extent of mold progression and the number of years, and the chemicals are applied using a specialized mop, brush, or spray device. 【Main Components of Mold Removal Agent】 ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

At Apia Co., Ltd., we conduct low-odor, mold sterilization cleaning. We impregnate the ceiling boards with chemicals to sterilize and clean the mold inside the boards. Not only is the odor minimal and the finish excellent, but it also significantly delays the reappearance of mold on the surface compared to painting and cleaning. Since we use very safe chemicals compared to sodium hypochlorite and paint, there is little odor, and it does not affect the opening of your business. 【Main Components of Mold Removal Agent】 ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

At Apia Co., Ltd., we impregnate ceiling boards with chemicals to disinfect and clean the mold inside the boards. The dilution ratio of the chemicals is determined based on the extent of mold progression and the number of years, and the chemicals are applied using a specialized mop, brush, or spray device. Since the chemicals are much safer compared to sodium hypochlorite and paint, they have a low odor and do not affect business operations. [Main Components of Mold Removal Agent] ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

At Apia Co., Ltd., we perform low-odor, mold sterilization cleaning. We impregnate the ceiling boards with chemicals to sterilize and clean the mold inside the boards. Not only is there minimal odor and a good finish, but it also significantly delays the reappearance of mold on the surface compared to painting and cleaning. The dilution ratio of the chemicals is determined based on the progress of the mold and the number of years, and the chemicals are applied using a dedicated mop, brush, or specialized sprayer. 【Main Components of Mold Removal Agent】 ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

At Apia Co., Ltd., we offer low-odor mold sterilization cleaning services. In this process, we will cover the entire area, and based on the progress of the mold and the number of years, we will determine the dilution ratio of the chemicals and apply them using a specialized mop, brush, or spray applicator. Not only is the finish good with minimal odor, but it can also significantly delay the reappearance of mold on the surface compared to painting or cleaning. [Main Components of Mold Removal Agent] ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

We would like to introduce the mold removal service offered by Apia Co., Ltd. The main reason why commercial mold removers cannot kill mold is that they cannot break down the septum, preventing the detergent (disinfectant component) from reaching the fungal spores. ARA has both disinfecting effects and the ability to break down oils and proteins. By applying ARA to the mold, the protein-decomposing components dissolve the septum, allowing the disinfecting components to break down the fungal spores, achieving complete sterilization. [Main Ingredients of Mold Removal Agent] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

We would like to introduce the mold removal service offered by Apia Co., Ltd. By applying ARA to the mold, the protein-decomposing components dissolve the partitions, and the antibacterial components completely eliminate the bacteria by breaking down the fungal spores. It has a low odor and provides a good finish, and compared to paint and cleaning, it can significantly delay the reappearance of mold on the surface. 【Main Components of the Mold Removal Agent】 ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

At Apia Co., Ltd., we conduct low-odor mold disinfection cleaning. We impregnate the ceiling boards with chemicals to disinfect and clean the mold inside the boards. Not only is there minimal odor and a good finish, but it also significantly delays the reappearance of mold on the surface compared to painting and cleaning. By applying ARA to the mold, the protein-decomposing components dissolve the partition, and the disinfecting components break down the fungal spores, allowing for complete disinfection. [Main Components of Mold Removal Agent] ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

We would like to introduce a case of mold removal work carried out on the ceiling boards around the air conditioning at a certain hospital in Nara Prefecture. Our original mold removal agent has a low odor, allowing for safe completion of the work even in hospitals. Not only does it have a minimal smell and a good finish, but it can also significantly delay the reappearance of mold on surfaces compared to painting and cleaning. [Main Components of the Mold Removal Agent] ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

We would like to introduce a case of mold removal work carried out on ceiling gypsum board at a certain supermarket in Aichi Prefecture. The main reason why commercially available mold removers cannot kill mold is that they cannot break down the partition, preventing the detergent (disinfecting component) from reaching the mold spores. With our original special chemicals, the area was thoroughly cleaned. Our system allows the chemicals to penetrate the ceiling board, disinfecting and cleaning the mold inside the board. 【Main Components of Mold Removal Agent】 ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

We would like to introduce a case of mold removal work conducted on ceiling gypsum board at a certain supermarket in Aichi Prefecture. Our system sterilizes even the mold spores inside the board, significantly delaying the visibility of mold. The mold had spread throughout the ceiling, but after the work, it became remarkably beautiful. 【Main Components of the Mold Removal Agent】 ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

At Apia Co., Ltd., we perform low-odor, mold sterilization cleaning. Not only is it low in odor and provides a good finish, but it can also significantly delay the reappearance of mold on surfaces compared to painting and cleaning. We determine the dilution ratio of the chemicals based on the progress of the mold and the number of years, and apply the chemicals using a dedicated mop, brush, or specialized sprayer. You can trust us to handle even the strong mold that has proliferated in your factory. 【Main Components of Mold Removal Agent】 ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

In hospitals, it is important to maintain a clean environment to protect patients' health. In particular, mold can cause allergies and infections, increasing the risk of hospital-acquired infections. Our mold removal service reduces the risk of hospital-acquired infections by suppressing the odor of chemicals and breaking down and eliminating mold. Our system disinfects even the mold spores inside the boards and is suitable for pre-painting treatment. 【Usage Scenarios】 - Patient rooms - Operating rooms - Waiting rooms - Examination rooms - Other areas prone to mold growth 【Benefits of Implementation】 - Reduced risk of hospital-acquired infections - Protection of patients' health - Maintenance of a clean environment - Use of low-odor chemicals - Measures to prevent recurrence

In hotel guest rooms, cleanliness is crucial, and the occurrence of mold can significantly undermine customer satisfaction. Particularly during humid seasons or in poorly ventilated rooms, mold can easily proliferate, leading to situations where the use of guest rooms may need to be restricted. Our mold removal service uses odor-neutralizing agents to thoroughly eliminate mold within the guest rooms. By reducing the risk of mold occurrence and providing guests with a comfortable stay, we contribute to improving the hotel's ratings. 【Usage Scenarios】 - Mold removal from walls, ceilings, and bathrooms in guest rooms - Removal of mold odors - Mold prevention for painted boards 【Benefits of Implementation】 - Improved cleanliness of guest rooms - Increased customer satisfaction - Maintenance and enhancement of room occupancy rates - Reduced risk of health issues caused by mold

In food factories, foreign matter contamination is a serious issue, and the occurrence of mold increases that risk. Mold not only compromises product quality but can also cause health hazards. In particular, the emergence of mold in manufacturing lines and storage areas can easily become a pathway for contamination, necessitating thorough measures. Our mold removal service uses low-odor agents to eliminate mold at its source, thereby reducing the risk of foreign matter contamination. 【Usage Scenarios】 - Food manufacturing lines - Storage warehouses - Air conditioning systems - Walls and ceilings 【Benefits of Implementation】 - Reduced risk of foreign matter contamination - Improved product quality - Protection of employee health - Enhanced corporate reliability

In hygiene management at nursing facilities, it is important to suppress the growth of mold and maintain a clean environment to protect the health of residents. Particularly in areas where moisture is likely to accumulate and where cleaning is difficult, mold can easily thrive, increasing the risk of health issues. Our mold removal service improves the hygiene environment within the facility by minimizing chemical odors and eliminating mold at its source. We reduce the risk of mold growth and provide a space where residents can feel safe and comfortable. 【Usage Scenarios】 - Water areas such as bathrooms, toilets, and kitchens - Air conditioning systems and exhaust fans - Walls, ceilings, and floors 【Benefits of Implementation】 - Reduced risk of health issues caused by mold - Improved cleanliness throughout the facility - Increased resident satisfaction

In restaurants, hygiene management is extremely important in the kitchen. Mold not only compromises the quality of ingredients but also increases the risk of food poisoning. Particularly in kitchen environments with high humidity and abundant organic matter, mold tends to thrive, making appropriate measures essential. Our mold removal service uses low-odor agents to thoroughly eliminate mold within the kitchen. We support the creation of an environment that reduces the risk of mold growth and allows our customers to provide safe meals. 【Usage Scenarios】 - Kitchen walls and ceilings - Refrigerators and display cases - Ventilation fans and ducts - Sink areas - Food storage rooms 【Benefits of Implementation】 - Reduction of food poisoning risk due to mold - Preservation of ingredient quality - Protection of employee health - Improvement of the store's hygiene image

In the warehouse industry, it is important to suppress the occurrence of mold in order to maintain the quality of stored items. Especially in environments where humidity management is difficult, mold growth is an unavoidable issue. Mold not only accelerates the deterioration of stored items and diminishes product value, but it can also pose health risks. Our mold removal service protects stored items from mold by minimizing chemical odors and breaking down and eradicating mold. 【Usage Scenarios】 - Mold prevention for stored items in warehouses (products, materials, etc.) - Mold prevention in warehouse environments where humidity management is challenging - Preventing the decline in product value due to mold 【Benefits of Implementation】 - Maintenance of the quality of stored items - Preservation of product value - Improvement of hygiene conditions within the warehouse

In an office environment, the health of employees and a comfortable space are essential. In particular, mold can hinder air purification and potentially cause health issues. The occurrence of mold not only accelerates the deterioration of buildings and detracts from their aesthetic appeal but can also lead to allergies and respiratory diseases. Our mold removal service minimizes chemical odors and eliminates mold at its source, improving the overall air quality in the office. 【Usage Scenarios】 - Conference rooms within the office - Break areas - Surroundings of air conditioning equipment - Mold removal from walls and ceilings 【Benefits of Implementation】 - Reduction of health risks associated with mold - Creation of a comfortable office environment - Maintenance of the building's asset value - Improvement in employee productivity