西都電機 List of Products and Services

This document provides a detailed introduction to the heating system design guidelines, from the concept of heat tracing to the selection of heaters. Additionally, it includes calculations of heat dissipation using diagrams and a heat dissipation table for piping. Please use this for selecting heaters and materials. [Contents] ■ Concept of heat tracing ■ Purpose and characteristics of electric heating ■ Heating targets ■ Calculation of heat dissipation ■ Selection of heaters ■ Selection of materials *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "T-M-10-S/+x+y" is a mechanical thermostat for general use. When combined with the power connection kit C25-100, it is possible to directly connect heating cables. It can be used as a power connection kit with thermostat functionality. Temperature settings can be made from the plug attached to the cover without removing the cover itself. The thermostat is available in three different temperature ranges. 【Features】 ■ Direct connection of heating cables is possible ■ Temperature settings can be made from the plug attached to the cover ■ Capillary is made of stainless steel and is 2m long ■ The thermostat is available in three different temperature ranges ■ Connection kit must be arranged separately *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "E-100-L" is an end seal kit with a single light module. The light module uses high-brightness LEDs, offering excellent visibility and a long lifespan. It is an encapsulated industrial-grade electronics product with a highly reliable sealing method against moisture and dust. Additionally, the light module is replaceable and can be swapped with the existing lid of the E-100-E. 【Features】 ■ Usable with BTV, QTVR, XTV, KTV, VPL ■ Resistant to impact, high temperatures, chemicals, and UV ■ Double sealing structure ■ Light module uses high-brightness LEDs ■ Light module is replaceable *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

The "E-06" and "E-19" are end seal kits for Raychem self-regulating heating cables, while the "E-50" is for power-limited heating cables. The "E-06" is compatible with BTV and QTVR, the "E-19" with XTV and KTV, and the "E-50" with VPL. These products use adhesive heat shrink tubing, allowing for easy waterproof end termination through heating. They have a low profile, enabling installation on the surface of pipes. 【Overview】 ■ Applicable heating cables - E-06: For BTV and QTVR - E-19: For KTV and XTV - E-50: For VPL ■ Kit contents - Heat shrink tubing *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

The "PMK-HSE2" is an end seal kit for BTV-CT, BTV-CR, and QTVR-CT heating cables. One kit contains enough for 5 end seals. The kit includes heat shrink tubing of approximately 75mm and approximately 25mm. It can also be used in hazardous areas overseas. Please contact us for more details. 【Specifications】 ■ Maximum exposure temperature: 175℃ ■ Dielectric strength: 2.2MV/m ■ Volume resistivity: 10^13Ωcm ■ Industrial dryer: minimum output of 1460W hot air gun (or gas torch) *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

The E-150 is an end seal kit that can be installed under insulation materials. It can be used in applications with a temperature range of -40°C to 215°C. It has received approvals from FM, CSA, and PTB for use in hazardous locations overseas. The robust mechanism of the end seal excels in impact resistance, high-temperature resistance, and chemical resistance. It does not require heating treatment during installation, making maintenance quick and easy. 【Features】 - Usable in applications with a temperature range of -40°C to 215°C - Low-profile housing can be installed on surfaces such as piping - Excellent impact resistance, as well as high-temperature and chemical resistance - Designed as a reliable end seal that can be installed under insulation materials - Quick and easy maintenance *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

The "E-100-E" is an end seal kit for Raychem self-regulating heating cables with an IP66 rating. After installation, maintenance can be easily performed, allowing inspection of the heating cable without removing the end seal. This kit can be used in domestic Class 1 and Class 2 hazardous locations or in Type 1 and Type 2 hazardous areas. 【Features】 ■ Usable for VPL as well ■ Secures the heating cable with a strong fastening mechanism ■ Easy maintenance after installation ■ Replacement boots can be arranged separately ■ Explosion-proof certification: TIIS technical standards and TIIS technical guidelines 2008 for increased safety explosion-proof structure *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

Our company handles "accessories" manufactured by Reikem. We have a wide range of products including heater fixing tape, pipe straps, protectors, and more. Please be sure to use genuine products. 【Product Lineup (Partial)】 ■ Heater fixing tape ■ Pipe straps ■ Labels ■ Protectors ■ Adapter for small pipes (for piping under 25A) *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

This product is a general-purpose 2-wire Pt100 temperature measuring resistance with a connection box made of glass fiber reinforced polycarbonate. It cannot be used in hazardous locations. The connection to the temperature controller will be 3-wire, so it will be treated similarly to a standard 3-wire temperature measuring resistance. 【Product Overview (Excerpt)】 <Sensor> ■ Type: Pt100 temperature measuring resistance (2-wire) ■ Material - Sensor part: Stainless steel - Lead wire: Silicone ■ Temperature measurement range: -50°C to +180°C ■ Length/Weight: 2m/100g ■ Outer diameter: Lead wire 4.6mm, sensor part 6.0mm *For more details, please refer to the PDF document or feel free to contact us.

• Resistors

We handle Raychem's "Self-Regulating Heater." It allows for reliable and safe electric heating and insulation without the risk of abnormal overheating or burnout, even without using a thermostat. Additionally, due to its continuous parallel circuit structure, it can be cut to the necessary length on-site for use. 【Features (Self-Regulation)】 ■ The amount of heat generated increases or decreases with temperature changes, controlled by the heating element itself. ■ It will never operate above the self-regulating heater's heat resistance temperature, even with continuous use. ■ There is no need to install a thermostat for overheating prevention. ■ It will not create hot spots (overheated areas) even when used in a crossed configuration. ■ There is no risk of the heater burning out due to abnormal overheating. *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

"TraceTech" is a system that can pinpoint the location of oil, liquid, and water leaks. It quickly and accurately detects leaks of liquids such as fuel oil, acids, alkalis, water, and organic solvents from pipes and other sources in small amounts, preventing leakage accidents before they occur. Furthermore, it can operate as a standalone system or be easily integrated into SCADA systems, FA systems, and building management systems. 【Features】 ■ High-reliability Raichem conductive polymer technology applied ■ Simple detection and location detection circuit ■ Easy and straightforward operation of the detector ■ Entire sensor cable functions as a sensor ■ High accuracy in leak location detection (+/-1m) *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "HWAT Hot Water Temperature Maintenance System" is a hygienic system that reduces issues with bacteria such as Legionella by maintaining a low volume of water and low heat dissipation within the piping. There is no need for installation work on return pipes, valves, or pumps, and complex design work or balancing adjustments for the circulation system are also unnecessary. Furthermore, since there is no heat dissipation from the return pipe, only the heat dissipation from the hot water piping is present, resulting in a lower overall heat dissipation for the system and eliminating power consumption from the circulation pump. 【Features】 ■ Hygienic ■ Space-saving ■ Simple ■ Low energy consumption ■ Reduced maintenance costs *For more details, please refer to the PDF materials or feel free to contact us.

• tank

During cold periods such as winter, it is common for liquids handled in food and chemical factories to freeze or solidify. In the case of boilers, there can be delays when liquefying after a break, and it takes time for the temperature to rise to high levels, resulting in losses. Self-regulating heaters can be left unattended 24/7, 365 days a year! We recommend self-regulating heaters that prevent freezing and solidification. They can heat liquids evenly and uniformly in a semi-permanent manner. The equipment costs are also one-third of that of boilers, which helps reduce costs, making them increasingly popular recently! *For more details, please download the PDF.

• Other machine elements

Even without using a thermostat, it prevents overheating and burning, ensuring reliable and safe freeze protection and process heating. It is an auto-trace heater that can be cut to the required length on-site. 【Self-regulating heater product list】 ■ Up to 65°C ・Self-regulating trace heater: BTV1-CT, -CR (100V) ・Self-regulating trace heater: BTV2-CT, -CR (200V) ■ Up to 110°C ・Self-regulating trace heater: QTV1-CT, -CR (100V) ・Self-regulating trace heater: QTV2-CT, -CR (200V) ■ Up to 120°C ・Self-regulating trace heater: XTV1-CT, -CR (100V) ・Self-regulating trace heater: XTV2-CT, -CR (200V) ■ Up to 150°C ・Self-regulating trace heater: KTV1-CT, -CR (100V) ・Self-regulating trace heater: KTV2-CT, -CR (200V) ■ Up to 235°C ・Self-regulating trace heater: VPL1-CT (100V) ・Self-regulating trace heater: VPL2-CT (200V)

• Other heaters

The auto-trace heater (self-regulating heater) is a self-regulating parallel circuit heater developed by Raychem. Due to the reliability and ease of installation of Raychem's auto-trace heater (self-regulating type), it is widely used in various industries for process heating and freeze prevention. By switching from steam, energy costs can be reduced, maintenance and operating costs have been reduced to less than one-tenth annually, and installation time has been cut to less than one-fourth. 【Types of Auto-Trace Heaters (Self-Regulating Heaters)】 ● Self-Regulating Heater BTV Series (Freeze Prevention and Heating up to 65°C) ● Self-Regulating Heater QTVR Series (Heating up to 110°C) ● Self-Regulating Heater XTV Series (Heating up to 120°C) ● Self-Regulating Heater KTV Series (Heating up to 150°C) ● High-Temperature Power Control Heater VPL Series (Power-Controlled Heating Cable) This self-regulating heater has also been adopted by various power companies as part of energy-saving proposals.

• Other environmental equipment

We often receive the following concerns from those using heaters and boilers: - The temperature doesn't rise... there are temperature inconsistencies... - The heater deteriorates quickly... - I don't want to do double installation... - Maintenance is difficult... For those facing such issues, we are offering a must-see collection titled "Solutions for Heater and Boiler Concerns"! [Contents Overview] ■ Common problems with heaters and boilers ■ Types of heaters ■ Case studies for problem resolution ■ Company introduction If you have any issues with heaters or boilers, please leave it to Saito Electric for proposals that can expect labor-saving and energy-saving effects, as well as reductions in carbon dioxide. We can provide solutions tailored to your company, as we can accommodate various types of heaters.

• Other heaters

We often receive the following concerns from those using heaters and boilers: - The temperature doesn't rise... there are temperature inconsistencies... - The heater deteriorates quickly... - I don't want to do double installation... - Maintenance is difficult... For those facing such issues, we are offering a must-see, 【Heater and Boiler Troubleshooting Guide】! 【Contents Overview】 ■ Common concerns about heaters and boilers ■ Types of heaters ■ Troubleshooting case studies ■ Company introduction If you have any issues with heaters or boilers, please feel free to consult us. We can provide solutions tailored to your company's needs, as we are capable of addressing various types of heaters.

• Other heaters

The "Pipe Heater" is an environmentally friendly, self-regulating heater for pipes that does not waste water or energy. This system uses "self-regulating heating cables," which increase heater output at low temperatures, decrease heater output at moderate temperatures, and further reduce heater output to the minimum at high temperatures. The self-regulating feature helps avoid overheating and keeps power consumption low. 【Features】 ■ Self-regulating ■ Reduced power consumption ■ Low temperature = high heat output ■ Moderate temperature = low heat output ■ High temperature = minimum heat output *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

"Auto Trace" is a self-regulating heater for parallel circuits. It can provide reliable and safe freeze prevention and process heating without overheating or catching fire, even without using a thermostat. It is an Auto Trace heater that can be cut to the required length on-site due to its continuous parallel circuit structure. 【Features】 ■ Self-regulating heater ■ Parallel circuit heater ■ The heater itself controls its output according to the surrounding temperature 【Principle of Self-Regulation】 A resistive element made from a special blend of polymer and conductive carbon forms countless parallel electrical paths along the entire length of the two conductors. When the element heats up, this core expands slightly. This increases the electrical resistance and reduces the heater's output. When the core's temperature drops, it contracts slightly, decreasing the electrical resistance and increasing the heater's output. This technology allows the heater to continuously respond to changes in temperature. Thus, the principle of the Auto Trace heater is suitable for energy saving. *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

The tank heater is a heater specifically designed to efficiently warm tanks. It can maintain temperature regardless of tank size. It does not require a boiler manager and allows for automatic, worry-free heating 24 hours a day, 365 days a year. Compared to hot water steam systems, it prevents opportunity losses such as line stoppages. 【Features】 ■ Maintenance-free ■ Extremely energy-efficient, resulting in low costs ■ Self-regulating, eliminating concerns about burning ■ Short delivery time = immediate installation possible! *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

The Auto Trace Heater (self-regulating tape heater) is a self-regulating heater developed by Reikem that operates in a parallel circuit. The heat trace solution is an auto trace (self-regulating) tape heater that provides insulation and temperature maintenance, created from the know-how cultivated through products, technology, and achievements. By switching from steam, it can reduce energy costs, achieving a reduction in maintenance and operating costs to less than one-tenth annually, and construction time to less than one-quarter. **Features of the Self-Regulating Tape Heater System:** - Output changes according to ambient temperature (self-regulating characteristics) - Long lifespan (countermeasures against aging degradation) - No maintenance required, etc. Due to the reliability and ease of installation of Reikem's Auto Trace Heater (self-regulating tape heater), it is widely used in various industries for process insulation and freeze prevention. This self-regulating tape heater has also been adopted by various electric power companies as part of energy-saving proposals. *For more details, please contact us or download the PDF.*

• tank

The "Pipe Heater" is an environmentally friendly heater for piping that does not waste water or energy. This system uses "self-regulating heating cables," which increase heater output at low temperatures, decrease heater output at moderate temperatures, and further reduce heater output to the minimum at high temperatures. The self-regulating feature prevents overheating and helps to reduce power consumption. 【Features】 ■ Self-regulating ■ Reduced power consumption ■ Low temperature = high heat output ■ Moderate temperature = low heat output ■ High temperature = minimum heat output *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

Seido Electric provides safe insulation heaters (self-regulating heaters) that have a long lifespan, can adjust output according to ambient temperature, and can be used in hazardous areas. Since the temperature is maintained at the upper limit, it does not overheat and can provide uniform insulation. The insulation heater operates on electricity, so a boiler operator is not required. It offers significant cost advantages compared to hot water and steam, and has recently gained attention! [Challenge] A confectionery manufacturer reported spending 10 million yen per month to melt chocolate and jam, which is costly and requires a boiler operator. They requested to reduce costs, including labor expenses. [Solution] By replacing the existing hot water and steam systems with insulation heaters (self-regulating heaters), we achieved a 90% cost reduction. ↓ ↓ ↓ The heaters can operate 24 hours on electricity, requiring only the cost of the necessary energy, reducing the monthly cost from 10 million yen to about 1 million yen, which is roughly one-tenth of the usual cost. The absence of a boiler operator also significantly reduced expenses, much to their satisfaction.

• Other machine elements

The TraceTek systems we handle allow for easy design of leak detection systems across wider floors, multiple levels, and even non-contiguous small areas by combining analog measurement with digital technology. All SIMs are compatible with Modbus and Johnson Controls' N2 open protocol, and can be easily converted to BACnet, enabling TraceTek leak detection to be added to many building management systems as a plug-and-play solution. Additionally, TraceTek cables utilize conductive polymers to achieve long lifespans. Some of the oldest TraceTek water leak detection cables have been operational for over 25 years. *For more details, please refer to the PDF materials or feel free to contact us.*

• Other information systems

Commercial facilities often need to be equipped with backup power generation systems, and hospitals, server facilities, large office buildings, and many other commercial and public facilities require backup diesel generators. However, the pumping and storage of diesel fuel oil both inside and outside buildings carry the risk of rapidly spreading fires that exceed the coverage of sprinkler systems. The TraceTech high-speed fuel oil detection sensor "TT-FFS" and the "TT5000" fuel oil sensor cable can be installed around the generator's base, beneath a one-day supply tank, within double piping, in trenches where supply/return piping connects, and in other similar locations. Additionally, the "TT-FFS probe" is designed to react to diesel fuel oil within seconds. *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

Water damage often occurs when leaks go unnoticed for an extended period. The leaks that occur can cause significant damage before they are discovered. Libraries, museums, underground storage facilities, archived records, and similar collections are extremely vulnerable to damage. In addition to damage to furniture and equipment, water damage to carpets, hardwood floors, walls, and ceilings can lead to high recovery costs. The solution is the "T1000" and "T1100-OHP" sensor cables. These products can be placed in areas where leaks may occur or around places that need protection. *For more details, please refer to the PDF materials or feel free to contact us.*

• Other information systems

In many modern businesses, server equipment plays a central nervous system role, with thousands of optical cables and electrical wires concentrated in a narrow space. The equipment housed in racks generates a large amount of heat, necessitating heat removal to prevent equipment failure. The role of heat removal is handled by HVAC systems, where cooled water is pumped to the equipment as an important heat removal medium. However, water and electronic devices cannot coexist. To address this, TraceTech has developed a "leak detection sensor cable" that can detect water leaks and accurately pinpoint their locations. It can immediately detect any water leaks from HVAC units, cooling water piping joints, or backup drainage systems at precise locations, allowing for the appropriate floor tiles to be removed for remediation. *For more details, please refer to the PDF document or feel free to contact us.*

• Other information systems

In water leak detection, the important factors are rapid detection and accurate identification of the leak location. TraceTech's sensor cables and monitoring systems are equipped with features that enable precise identification. This solution provides significant flexibility in design, which is required for modern high-rise buildings. 【Features】 ■ Utilizes high-performance polymers to maximize the durability of sensor cables ■ Provides cables and probes that can accurately detect the location of leaks directly and pinpointedly ■ Capable of simultaneously tracking multiple leaks ■ Can be integrated with building management systems, email/SMS, or web pages ■ Offers options to automatically close pumps or valves as needed ■ Modular assembly allows for system configuration and expansion according to needs ■ Can independently handle up to 250 cables *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

We assist in the implementation of the "TraceTek Leak Detection System." This system, which has been installed in thousands of locations worldwide, including the Swiss Re Building, a symbol of London, and Shanghai Hills, serves as a powerful solution for water leak prevention within buildings. *For more details, please refer to the PDF document or feel free to contact us.*

• Other information systems

The "SEITO Smart System" is a high-value-added temperature system created through know-how cultivated by high-quality products, technology, and achievements. This system achieves approximately 60% energy savings compared to hot water steam systems and significantly contributes to CO2 reduction. 【Examples of Applicable Systems (Excerpt)】 ■ Plants 　・Freeze prevention system 　・Solidification prevention system 　・Liquefaction prevention system 　・Condensation prevention system ■ Civilian Use 　・Hot water supply system 　・Firefighting system 　・Sterilization system 　・Air conditioning system, etc. *For more details, please feel free to contact us.

• Other heaters

We would like to introduce the features of the "SEITO Smart System." This system is a high value-added temperature system created through know-how cultivated by high-quality products, technology, and achievements. Features include the safety of being grounded in case of an external injury, the ability to be layered, and the fact that heater maintenance is not required, among various other characteristics. 【Features】 ■ Grounded winding (ground fault measures in place) ■ No disconnections; low surface temperature ■ Maintenance-free ■ Smart system guarantee *For more details, please feel free to contact us.

• Other heaters

We would like to introduce the features of the "SEITO Smart System." This system is a high value-added temperature system created through know-how cultivated by high-quality products, technology, and achievements. Among its features, it can be noted that "heating only the low-temperature areas leads to cost reduction," as well as its ability to be used in "hazardous areas" and its "long lifespan and low cost," among various other characteristics. 【Features】 ■ Output can be adjusted according to ambient temperature ■ Constant surface temperature (explosion-proof certification obtained) ■ Long lifespan (measures against aging degradation in place) ■ Can be cut, connected, and overlapped (flexible response to equipment changes) *For more details, please feel free to contact us.

• Other heaters

Seido Electric provides safe, self-regulating heaters that have a long lifespan and can adjust their output according to ambient temperature, making them suitable for use in hazardous areas. Since the temperature is maintained at an upper limit, they do not overheat and can provide uniform heating. Being electric, there is no need for boiler operators, resulting in significant cost advantages compared to hot water and steam systems, which have recently garnered attention! **[Challenge]** A confectionery manufacturer was spending 10 million yen per month to melt chocolate and jam, which was costly and required a boiler operator. They requested a reduction in costs, including labor expenses. **[Solution]** We replaced the existing hot water and steam systems with self-regulating heaters, achieving a 90% reduction in costs. The electric heaters can operate 24 hours a day and only incur costs for the necessary energy, reducing the monthly expense from 10 million yen to about 1 million yen, roughly one-tenth of the original cost. Additionally, the elimination of the need for a boiler operator significantly lowered expenses, much to their satisfaction. *You can download the "Heater and Boiler Troubleshooting Guide" as a PDF!*

• Other machine elements

A "Heat Management System" is an industrial system designed to maintain or protect process piping, equipment, vessels, and instrumentation within a predetermined temperature or design criteria. By involving early in the planning of the process, we support decision-making to reduce the overall installation costs of the Heat Management System. 【Features】 ■ Participation in planning at an early stage ■ Detailed engineering ■ Procurement ■ Installation and construction ■ Site services ■ Commissioning ■ Quality assurance/quality control ■ Post-delivery services and maintenance *For more details, please refer to the PDF materials or feel free to contact us.

• others

As one of the world's largest suppliers of electric heat management systems, fire-resistant wires, and special heaters, we provide groundbreaking products and turnkey solutions from leading market brands such as Raychem and Tracer, primarily for the general equipment industry, oil and gas industry, chemical industry, power industry, and aerospace industry! We have also established a solid position as a global leader in heat management systems required for projects of all sizes and scopes. *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "PETROTRACE Downhole Heating System" has been trusted by oil companies worldwide for over 20 years as an advanced oil recovery and flow assurance tool that increases production, reduces overall costs, and provides environmentally friendly solutions. The "TRAC-LOC Tank Insulation System" is structurally superior to conventional tank insulation methods, maintenance-free, and achieves low costs. It is an ideal system for large flat-bottom tanks used for raw material storage that are sensitive to temperature fluctuations and require insulation and exterior treatment to suppress thermal variations. The "TraceTech Leak Detection System" is a reliable system equipped with sensor cables and monitoring systems for hydrocarbon liquids and environmental applications. It can accurately detect and indicate the location of leaks, allowing corrective actions to be taken before leak incidents become news or newspaper articles. *For more details, please refer to the PDF materials or feel free to contact us.

• Other core systems

The selection of control and monitoring systems suitable for various projects and applications is influenced by various aspects. To balance the total installed cost (TIC) over the lifespan of the factory with the long-term benefits related to the heat management system as a whole, the integration of various technologies can sometimes provide effective solutions. We offer a wide range of control and monitoring systems that provide scalable solutions, from proven, economical, and simple mechanical thermostats to local control and central monitoring systems. **Features** - A comprehensive product line that supports single circuit and multi-circuit applications - Advanced monitoring and diagnostic capabilities - Modular systems including single-point architecture - Multiple RTD functions - Ability to reduce distribution costs by switching to rated currents of up to 690V and 60A - Value-added accessories that lead to significant cost savings *For more details, please refer to the PDF materials or feel free to contact us.*

• Other security and surveillance systems

The STS system from Reikem, which we represent as an agency, is an industrial heat management system that can be used for various applications. It can transfer heat to long piping with a circuit length of up to 25 km. Additionally, the connection kit is robust and corrosion-resistant, can be installed in a short time, has a low number of components, and allows for visual monitoring of electrical and conductive conditions. One type of connection kit can accommodate all of Reikem's self-regulating cables. *For more details, please refer to the PDF document or feel free to contact us.*

• Other heaters

Our company is an authorized primary engineering distributor for Raychem. Raychem invented self-regulating heater technology over 40 years ago, bringing a significant transformation to the insulation industry at that time. Self-regulating heating cables contain heating resistors made from a polymer blended with conductive carbon, and due to the composition of this special material, an electrical circuit is formed between the parallel conductors along the entire length of the cable. Additionally, Raychem's Power Limiting (VPL) heaters are parallel heating cables that have a coiled alloy resistance heating element wrapped around two parallel conductors. The resistance of this heating element increases with temperature, creating a positive temperature coefficient (PTC) effect. VPL can be used for high output and high-temperature exposure requirements, which can reduce the number of heating cables needed for installation. *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

The "electric heat trace system" is not just about heating cables. With the Raychem brand, for which we are the distributor, we can provide all systems including transformers, control and monitoring panels, power connection boxes, heating cables, termination kits, and a wide variety of accessories. This enables you to achieve the desired heat management for preventing pipe freezing, maintaining process temperatures, and heating applications. 【Features】 ■ Heat trace ■ Turnkey solutions ■ Control and monitoring ■ Fire-resistant and heat-resistant wires ■ 3D printed modeling *For more details, please refer to the PDF materials or feel free to contact us.

• Other heaters

We are an authorized primary engineering distributor for Raychem. The Raychem brand we handle is one of the world's leading suppliers of electric heat management systems, fire-resistant cables, and special heaters, primarily serving the general equipment industry, oil and gas industry, chemical industry, power industry, and aerospace industry. [Before making a purchase, please consider the following points] - A wide range of heat trace technologies to suit all applications - Continuous innovation in products and services - A lineup of advanced control and monitoring systems - Excellent business operations supported by logistics hubs and customer service centers in major locations worldwide - A global company with over 85 locations and more than 2,500 employees worldwide *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

Our company is a licensed sales and engineering agent for Raychem's self-regulating heaters (auto-trace heaters), supporting energy-saving, cost-reduction, and CO2 reduction for systems. The Raychem brand is recognized for its technical leadership as the inventor of self-regulating heating cables. Additionally, Raychem's cables adjust their output according to surrounding and process conditions, accurately delivering the right amount of heat to the necessary location at the required time, making them ideal for heat management systems. [Features] ■ Authorized primary engineering agent for Raychem, handling self-regulating heaters and more ■ Supporting energy-saving, cost-reduction, and CO2 reduction for systems *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

The "Self-Regulating Heater Cable KTV Series" is an electric heating cable for process insulation that can maintain a maximum temperature of 150°C. The heat resistance specifications of this product are 150°C for continuous operation and 215°C for intermittent operation. It can be used as an electric heating system in hazardous locations of Class 1 and Class 2 in Japan, not only in general areas exposed to acids, alkalis, and organic materials but also through the specific system configuration of KTV products and their associated components. 【Features】 ■ Capable of maintaining process insulation up to 150°C ■ Type approval system ■ Complies with JIS testing (JISC3651) 【Product Composition】 ■ Conductor ■ Fluoropolymer resin insulation spacer ■ Self-regulating heating element ■ Fluoropolymer resin insulation coating ■ Tin-plated copper braid (shield) ■ CT: Fluoropolymer resin outer layer coating *For more details, please refer to the PDF materials or feel free to contact us.

• Other heaters

The "Self-Regulating Heater Cable XTV Series" is an electric heater cable designed for process temperature maintenance, capable of maintaining temperatures up to 120°C. The heat resistance specifications of this product are 120°C for continuous operation and 215°C for intermittent operation. It can be used as an electric heating system in hazardous locations of Class 1 and Class 2 in Japan, not only in general areas exposed to acids, alkalis, and organic materials but also in specific XTV products and their system configurations. 【Features】 ■ Capable of maintaining process temperatures up to 120°C ■ Type approval system ■ Complies with JIS testing (JISC3651) 【Product Composition】 ■ Conductor ■ Fluoropolymer resin insulated spacer ■ Self-regulating heating element ■ Fluoropolymer resin insulated coating ■ Tin-plated copper braid (shield) ■ CT: Fluoropolymer resin outer layer coating *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

The "Self-Regulating Heater Cable QTVR Series" is an electric heater cable for process heating that can maintain a maximum temperature of 110°C. It can also be used for freeze prevention in areas with significant heat loss. The heat resistance specification of this product is 110°C for both continuous and intermittent operation. Additionally, it can be used as an electric heating system in hazardous locations of Class 1 and Class 2 in Japan, thanks to the system configuration of specified QTVR products and their associated components, as well as in general areas exposed to acids, alkalis, and organic materials. 【Features】 ■ Effective freeze prevention in areas with significant heat loss ■ Capable of maintaining a maximum process temperature of 110°C ■ Model approval system ■ Compliant with JIS testing (JISC3651) 【Product Composition】 ■ Conductor ■ Self-regulating heating element ■ Fluoropolymer resin outer layer coating ■ Tin-plated copper braid (shield) ■ CT: Fluoropolymer resin outer layer coating *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters