プロフレックス List of Products and Services

The "S2AC (100V) Hose-Specific Crimping Machine" is a device that allows for quick repairs and DIY fixes of hydraulic and high-pressure hoses, even when they break. The required time is only 10 minutes. It also reduces the need for spare hoses and can cut costs by approximately 50% (with proven results). We will provide detailed guidance on hose manufacturing methods. Hoses and fittings will be selected for each customer. Fittings and joints can be shipped the same day, even if ordered in quantities of one. 【Features】 ■ Lightweight and compact ■ Can crimp from 25 to 350K ■ Time-saving ■ Cost reduction ■ Comprehensive after-sales support ■ Nationwide delivery available ■ When a contract is finalized, we will visit anywhere in the country for product instructions. <Support for Independent Hose Repair Service Startups> With 50 years of experience and know-how, we will provide heartfelt support for starting your own business or new ventures. Please feel free to contact us first! (Inquiries under personal names are also welcome.)

The "Stainless Steel Flexible Hose" is a product of Proflex Co., Ltd., a comprehensive manufacturer of hydraulic hoses, fittings, and crimping machines. This product is lightweight and flexible despite being made of stainless steel, with a bending force that is approximately one-third lower than conventional products, resulting in low reaction force. It can be manufactured in diameters ranging from 8A to 150A. Additionally, there is a wide variety of fittings available, and production can be done from a single unit. Short delivery times are also possible. 【Features】 ■ Ultra-flexible and low-reaction soft tube design ■ Soft and lightweight ■ Capable of manufacturing diameters from 8A to 150A ■ Materials include SUS304 and SUS316L ■ Production of double-blade exterior specifications and special fittings is also possible *For more details, please refer to the catalog or feel free to contact us.

Nationwide in Japan, wherever you are in need, we will go! Our technical staff will visit your factory or manufacturing site to measure hydraulic hoses/high-pressure hoses, fittings, valves, filters, and other piping components on-site, and will handle ordering and arrangements. [Free estimates available] We can accommodate new installations, transfers, repairs, and replacements. We are one of the largest distributors of Parker Hannifin in Japan. We have a wide stock of hoses and fittings that can accommodate any machinery worldwide, and we also offer custom manufacturing of specially shaped fittings and couplers. We have numerous achievements with imported machine tools from Germany and the United States, including presses, molding machines, testing machines, cutting machines, ships, and heavy machinery! For any issues with hoses marked with overseas manufacturers such as Parker, RYCO, SEL, Norma, Eaton, Semperit, Aeroquip, HANSA-FLEX, LETONE-FLEX, and Manuli, please contact us! We respond to a wide range of needs regarding hose operating pressure, standards, applicable fluids, and more, so feel free to consult with us!

1. Approximately 5,000 items are always in stock! 2. Amazing low prices! 3. Orders can be placed from just one item! 4. Same-day delivery anywhere in the country!

【Specifications and Uses】 There are types of fittings that are secured with a general hose and band, as well as types that are secured without a band. The materials also vary, including brass, SUS (stainless steel), and plastic.

For steel pipe piping, the operating pressure is 0 to 25 MPa (250 kgf/cm²). We offer sizes in inches and millimeters to match the pipe size. Please choose the fittings according to the pipe diameter.

This is a one-touch fitting specifically designed for resin tubes. 【Features】 ● Tool-free one-touch fitting Simply insert the tube lightly to complete the installation. It can be easily removed by pressing the push ring and pulling out the tube with one hand. ● Significantly reduces piping space No tool workspace is required when attaching or detaching the tube. Additionally, the structure allows for rotation of the main body’s threaded part, enabling free changes in piping direction, making it easy to work in tight spaces. ● Uses electroless nickel plating for brass parts The brass parts have improved aesthetics and corrosion resistance due to electroless nickel plating. ● Teflon resin coating on the threaded part No sealing tape or sealing material is needed, significantly reducing work time and labor hours, and eliminating concerns about leaks due to variations (wrapping inconsistencies) during work. It has excellent water and oil resistance.

This is a stainless steel piping fitting designed for a pressure of 1.0 MPa (10 kgf/cm²). We offer a wide variety of fittings, including standard fittings, fittings with different diameters, threaded long pipes, flanges, and more. We can accommodate almost all sizes up to 2 inches. Additionally, fittings not listed can also be ordered or custom-made.

Compatible with fluids such as air, water, oil, and gas, with an applicable temperature range of -20°C to 150°C. The maximum operating pressure is 7.0 MPa (70 kgf/cm²). - Straight (hexagonal nipple, round nipple, hexagonal socket) - Bushing (to increase diameter, to decrease diameter) - 90-degree elbow - Tee - Fluid stoppers (plug, cap) And more, with a wide variety available!

Features - Low price - Lightweight and compact design - Abundant variations - Excellent durability, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance of resin material - Ideal for production lines, machine tools, electrical machinery, food machinery, and medical device components Maximum operating pressure: 1.4 MPa (at 20°C) Applicable temperature: -20°C to 110°C

It is an American standard screw. Production is possible from just one piece!

The connection position of the high-pressure hose can be oriented in any direction, allowing for shorter piping and reduced installation time. It is prepared to match the standards of high-pressure hose fittings. The swivel joint can easily rotate 360 degrees even when pressurized. There are two types of operating pressures: 21MPa (210kgf/cm²) and 35MPa (350kgf/cm²).

It is ideal for repairing pipes. From pipe welding to hose conversions and fittings, from fixed types to pipes. There are also various types available, including 90-degree and 45-degree elbows, tees, and straight connectors.

This is a high-pressure stainless steel threaded fitting. We have fittings for piping as well as fittings for hoses. If you are having trouble with fittings, please consult Proflex. We can manufacture from one piece.

This is a high-pressure steel screw fitting. We offer a variety of sizes for hydraulic piping as well as fittings for hydraulic hoses compatible with various construction machinery! We have a diverse lineup including gas threads, metric threads, unified threads, NPT threads, seated types, root O-ring types, and eyeglass types. If you are having trouble with fittings, please consult with Proflex! We can also search for items not listed in the catalog. Additionally, for special fittings, we can manufacture from just one piece.

Features - Lightweight and compact design - Rich variety - Excellent durability, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance in resin material - Ideal for production lines, machine tools, electrical machinery, food machinery, and medical device components Maximum operating pressure: 1.0 MPa (at 20°C) Applicable temperature: -20°C to 60°C

We perform greasing at wear points such as work machines and bearings using grease pumps. We offer five types: A type, B type, C type, pin type, and button type. Please choose according to your application.

It is of high quality. There is a wide range of sizes. It is used by welding stainless steel pipes.

Stainless steel compression fittings. Double ferrule design. Suitable for stainless steel pipes SUS316TP and SUS304TP. Can also be used with FE fluororesin tubes (translucent)! *The inch sizes are φ1/16 = φ1.59, φ1/8 = φ3.18, φ3/16 = φ4.76, φ1/4 = φ6.35, φ5/16 = φ7.94, φ3/8 = φ9.53, φ1/2 = φ12.7, φ5/8 = φ15.87, φ3/4 = φ19.05, φ7/8 = φ22.23, φ1'' = φ25.4.

Proflex sanitary products are all compliant with IDF and ISO standards, ensuring safe usage. We cover a wide range of items, including hygienic fittings, welded joints, threaded (IDF) joints, butterfly valves, and pipes, as well as other food and pharmaceutical hoses. We strive to offer products that consider the customer's perspective. We have also developed products that convert hoses to hygienic fittings without the use of hose clamps.

It can be connected to bare copper pipes, straight copper pipes, and plastic tubes (insert rings are required). There are types that connect with ring balls and types that connect with flaring. Cut the copper pipes and tubes to the required length. For copper pipes, it is recommended to cut them using a method that does not produce burrs, such as a dedicated pipe cutter. The ring type is fixed with ring balls, while the flare type is fixed with a sheet.

Aluminum, stainless steel, polypropylene, and bronze are available in the lineup. Complies with American MIL standards. The standard packing is NBR, but it can be changed to fluorine-based or EPDM packing. Compatible with safety cam locks. Features - Stainless steel, aluminum, bronze, and polypropylene are available for use with any fluid. - No special tools are required, making it easy for anyone to connect. - Manufactured based on A-A-59326 (MIL-C-27487), widely compatible with other products. - The standard packing is NBR (nitrile rubber), but it can be changed to other materials. Maximum operating pressure Up to 1.8 MPa (at 20°C) *Polypropylene is up to 0.7 MPa (at 20°C) Applicable fluids Food, pharmaceuticals, water, oil, air, gas, steam, etc. It can be used not only for liquids but also for gases and powders.

Features of the Safety Cam Lock 【Safety Mechanism Included】 The arm will not open unless the ring is pulled down. This prevents accidents caused by the cam lock disengaging due to vibrations or impacts. 【Auto Lock Mechanism Included】 Simply lowering the cam arm automatically engages the lock. The lock can be released by pulling down the ring. 【360° Rotating Swivel Type】 The SCLS type comes with a swivel function. It rotates 360°, allowing for smooth installation without twisting the hose. Easy operation in tight working spaces. Material: Made of SCS14 (equivalent to SUS316) Maximum Operating Pressure: Up to 1.8MPa (at 20°C) Applicable Fluids: Food, pharmaceuticals, water, oil, air, gas, steam, etc. It can be used not only for liquids but also for gases and powdered solids.

The cam lock and sanitary hose, flange, and valve have been combined into one. Made of SCS13 (equivalent to SUS316). Features of the Safety Cam Lock 【Equipped with Safety Mechanism】 The arm will not open unless the ring is pulled down. This prevents accidents where the cam lock may disengage due to vibrations or impacts. 【Equipped with Auto Lock Mechanism】 Simply lowering the cam arm automatically engages the lock. The lock can be released by pulling down the ring. Material: Made of SCS14 (equivalent to SUS316) *For the flange (FC type), the material of the flange part is SUS304. Maximum Operating Pressure: Up to 1.8 MPa (at 20°C) Applicable Fluids: Food, pharmaceuticals, water, oil, air, gas, steam, etc. It can be used not only for liquids but also for gases and powdered solids.

There are general-purpose and one-touch types of air couplers. For those who frequently detach the coupler, the one-touch type is recommended for its easy connection. There are also options with locks and swivels. The lock type should be used in areas with a lot of vibration or where the coupler tends to come off easily. The swivel type is used to prevent hose twisting. Maximum operating pressure: 1.0 MPa Applicable fluids: Air, water (made of SUS)

Features - It is a lightweight and easy-to-handle resin air coupler. - Equipped with "safety lock mechanism" and "one-touch connection system" as standard! - Compatible with the most commonly used air couplers in Japan. - The direction of fluid flow is from "socket" to "plug." Maximum operating pressure: 1.0 MPa Applicable temperature: 0℃ to 50.0℃ Applicable fluid: Air

Features - A lightweight and easy-to-handle resin water piping coupler. - Equipped with "safety lock mechanism" and "one-touch connection system" as standard! - Compatible with the most commonly used air couplers in Japan. - The flow direction of the fluid is from "socket" to "plug." Maximum operating pressure: 1.0 MPa Applicable temperature: 0℃ to 50.0℃ Applicable fluid: Water

There are two types of materials: made of brass and SUS304. The sealing material is NBR (nitrile rubber), but it can be changed to other materials. Both the socket and the plug do not have valves, so the effective cross-sectional area inside the pipe is wide, minimizing pressure loss. Maximum operating pressure: up to 7.4 MPa Applicable fluids: water, steam, oil, grease, powders

There are two types of materials: made of brass and SUS304. When the plug is inserted, the valve opens automatically and the fluid passes through. It remains unaffected even during rolling. It uses a coupling method in accordance with SAE standards. It has withstood 100,000 attachment and detachment tests. The standard packing is NBR (nitrile rubber), but it can be changed to VT-20 (fluoro rubber) or EPT (ethylene propylene). Maximum operating pressure: up to 7.35 MPa Applicable fluids: water, air, oil

There are three main types of hydraulic couplers available in the country. Please select the manufacturer you are currently using. If you are using a coupler in a location with strong vibrations, please choose one with a locking mechanism (with a pin). Additionally, if you are unsure of the manufacturer you are currently using, feel free to contact Proflex! It is recommended to regularly replace O-rings and backup rings. Prolonged use can lead to oil leakage.

We handle compatible products from Kärcher, Makita, and Asada, as well as compatible products from Zao Sangyo and Super Industry! They are made of brass. There are also types that can be directly connected to the nozzle of the cleaning hose!

It has pressure resistance and is used when pressure is applied from both inside and outside, such as during suction. It is made up of a hard part and a soft part, with the hard part being spiral-shaped. - The unique lightness of the vinyl suction is significantly lighter compared to rubber hoses, greatly improving workability. - Made from a special blend of materials, it has a clever combination of flexible elasticity and rigid parts, providing excellent flexibility. - The combination of flexible elasticity and strong rigidity produces outstanding pressure resistance, making it suitable for both suction and delivery. - It can be cut to your desired length according to the application, saving on fittings and making it very economical.

It is not pressure-resistant and is used for blowing air and liquid drainage. It consists of a hard part and a soft part, with the hard part being spiral-shaped. The soft part is lightweight due to its thin wall thickness, and the minimum bending radius for use is smaller than that of a suction hose. *Please use a suction hose when pressure is applied to the hose. It is extremely lightweight, highly flexible, and easy to work with in piping tasks. Uses of duct hoses: - For air supply and exhaust in indoor work sites, for environmental conservation. - For dust collection and air supply/exhaust in grinding machines for wood, metal, ores, etc. - For various applications such as deodorization, dehumidification, drying, refrigeration, heating, and air conditioning.

The adaptable fluids include air, water, gas, fuel oil, and various hydraulic oils. They are lightweight, flexible, and easy to handle. There are types ranging from general air hoses to fuel hoses. The operating pressure is up to 1.5 MPa. *Please check the operating pressure for each hose. Using it at a pressure higher than that is not recommended. In such cases, please use high-pressure hoses or hydraulic hoses.

Kohshin Rubber Product Material: Soft PVC This is a hose for water supply and drainage piping in factory machinery and equipment. It is transparent and has a fabric reinforcement layer. Applicable fluids: Water, air, powders

Hoses for food, beverages, and brewing. Complies with Ministry of Health, Labour and Welfare Notification No. 20 of the Food Sanitation Act (n-hexane compliant). The flexible fluorine hose can also be used for transporting chemicals and oils. It is a transparent type that allows visibility of the fluid inside. We have a variety of hoses available, from piping and transport hoses to those for food and pharmaceuticals.

A heat-resistant, strong synthetic fiber is sandwiched between the inner and outer surfaces of the silicone hose. It has excellent electrical insulation, chemical resistance, and ozone resistance. It is tasteless, odorless, non-toxic, and chemically inert, so it does not cause biological reactions and can be used in various food-related equipment.

It has excellent electrical insulation properties, chemical resistance, and ozone resistance. It is tasteless, odorless, non-toxic, and chemically inert, so there is no biological reaction, making it suitable for various food-related equipment. *This is not a pressure-resistant product.

Introducing polyurethane, nylon, fluorine tubes, and coiling tubes. These are piping tubes for general air pressure control lines. They can be used for water, chemicals, and more. Cut to the desired length and insert the fittings. Fittings include quick-connect fittings and push-in fittings. Proflex also offers quick-connect fittings and push-in fittings!

This is an air hose available in various colors. We also have air hoses for spatter resistance. Reasonably priced blade tubes (standard length) are also available. *One-touch fittings and copper pipe insertion fittings cannot be used.

It is ideal for general water supply and various covers. The transparent vinyl hose is not a pressure-resistant product. It is not recommended for connections with couplers or cam locks.

This is a spring-loaded vinyl hose that is ideal for oil, water, air, and more. In addition to withstanding pressure, it can also handle reduced pressure, making it perfect for vacuum applications!

It can be used for various purposes such as fuel lines and refrigeration piping. There is also a pipe cutter for cutting copper pipes. Cut with a dedicated pipe cutter. Please ensure that there are no burrs. Proflex also offers pipe cutters!

We offer mill and inch sizes! Perfect for swage lock type fittings! Ideal for food processing and chemical processing machinery, made with rust-resistant SUS316. We use specialized carbon for optimal fitting engagement. Cut to your desired length for use. Please ensure there are no burrs. We recommend using dedicated stainless steel engagement fittings. Proflex also offers stainless steel engagement fittings!

Using rust-resistant SUS304. We also accept threading processing at both ends. In addition to straight processing, we also perform bending processing. Furthermore, if you need to attach a joint, we can handle threading processing.