サンコーテクノ List of Products and Services

The Easy Anchor is a post-installed anchor for hanging objects that complies with various standards and specifications (public construction work). 【Features】 ● Complies with various standards and specifications (EZI-3045CN, EZI-4060CN, SEZI-3045CN, SEZI-4060CN) - Standard drawings for public building equipment construction (Mechanical Equipment Construction Edition) 2022 version - Guidelines for supervising mechanical equipment construction 2019 version - Guidelines for supervising electrical equipment construction 2019 version - SHASE-S 012-2021 Post-installed anchors for building equipment - Guidelines for seismic design and construction of building equipment 2014 version ● Completion of anchor installation can be visually confirmed When tightened with an impact driver, installation is complete when the check ring protrudes. (Recommended impact driver: 14.4V or 18V) ● Visual confirmation of hanging bolt screwing Installation is complete when the hanging bolt is screwed in and the bolt checker protrudes at two points. ● Zero plastic waste Installation can be done without generating waste. ● Easy Drill With a stopper, managing the drilling length is easy. The notched part of the stopper also allows for recessing fireproof covering material.

This product, the "Metal Undercut Anchor Smart Type," is designed to meet the needs of customers who want to use a metal expansion type anchor in high places within tunnels or in areas where a long drilling depth cannot be secured. Compared to conventional products, this product has a shorter embedment length and can be installed using a compact SDS-plus type hammer drill, allowing the anchor itself to expand (widen) while cutting into the hole wall, enabling quick installation even in upward positions. Additionally, by using the included anti-loosening nut (hard lock nut), a safer installation can be achieved, and it is also possible to inject the filler material beforehand, preventing deterioration from the gap between the drilled hole and the anchor after installation. These features make it suitable for use in telecommunications equipment construction and repair work in narrow environments where upward installation and maneuverability are required. 【Features】 - Accurate widening formation with self-undercut method - Short embedment length with a small diameter - Comfortable for upward installation - Resistant to loosening - Compatible with filler material

The Ministry of Land, Infrastructure, Transport and Tourism is promoting the "ICT transformation of the construction industry." Particularly gaining attention is the reproduction and drafting of construction sites using 3D laser scanners. By utilizing 3D scanners, it is possible to easily obtain point cloud data from high or distant sites while minimizing time constraints. However, to further utilize the acquired point cloud data, "modeling" is necessary, and the complexity of this process has become a bottleneck in the industry. Our company handles the entire process from scanning to modeling in-house, allowing us to safely and quickly reproduce and draft construction sites. We provide detailed explanations through web meetings and other means. [Scanning] - High-precision scanning using the RTC360 from Leica Geosystems. [Modeling] - Accurate modeling using Elysium's InfiPoints (and several other software). <First 30 companies only - 50% OFF campaign> To commemorate the release of our new service, we are offering a 50% discount from the usual estimated price. Applications can be made through the "Contact Us" section.

The All Anchor is a product characterized by its simple installation, which only requires driving in a core rod. The "C type (steel)" is a threaded anchor that uses a core rod driving method, the "SC type (stainless steel)" is made of stainless steel with excellent corrosion resistance, and the "C-D (steel with hot-dip galvanized treatment)" is an economical corrosion-resistant anchor. It is suitable for mounting handrails, installing equipment frames, and setting up vending machines. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/metal/anchor01/?parent_url=https://sanko-techno.co.jp/products/fastening/metal/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration (free) is required.

The "SC type" is made of stainless steel that is resistant to rust, while the "C-D type" is an economical steel anchor treated with hot-dip galvanization. This product can be used for a variety of applications, including handrail installation, fence post fixing, and equipment platform installation. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/metal/anchor01/?parent_url=https://sanko-techno.co.jp/products/fastening/metal/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration is required (free).

The "BA type (made of steel)" is a tapered bolt male thread anchor, the "SBA type (made of stainless steel)" is an excellent corrosion-resistant stainless steel, and the "BA-D (steel with hot-dip galvanized treatment)" is an economical corrosion-resistant anchor. They are suitable for mounting signs, installing distribution boards, and erecting fences. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/metal/anchor14/?parent_url=https://sanko-techno.co.jp/products/fastening/metal/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration (free) is required.

The "NSL type" is an anchor that maintains strength even in areas subjected to repeated loads. It is suitable for mounting surgical microscopes, installing mobile cart rails, and attaching tanks. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/metal/anchor18/?parent_url=https://sanko-techno.co.jp/products/fastening/metal/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration (free) is required.

The "NSB type" is an anchor that can be installed from above the equipment. It is suitable for securing elevated water tanks, attaching signs, and fixing temporary elevators. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/metal/anchor18/?parent_url=https://sanko-techno.co.jp/products/fastening/metal/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration (free) is required.

The "NT type" is an anchor that allows for construction management based on torque values. It is suitable for mounting communication equipment, medical devices, and other installations. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/metal/anchor19/?parent_url=https://sanko-techno.co.jp/products/fastening/metal/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration (free) is required.

The Torque Control Anchor is a torque management type anchor. The "TCW type (made of steel)" is a wedge-type anchor with a male thread, the "STCW type (made of stainless steel)" is an excellent corrosion-resistant stainless steel anchor, and the "TCW-D (steel with hot-dip galvanized treatment)" is an economical corrosion-resistant anchor. It is suitable for chair installation, piping, and duct installation. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/metal/anchor20/?parent_url=https://sanko-techno.co.jp/products/fastening/metal/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration (free) is required.

The "GA type (made of steel)" is a screw anchor with a wide range of sizes, the "SGA type (made of stainless steel)" is an excellent corrosion-resistant screw anchor, and the "GA-D type (made of steel with hot-dip galvanized coating)" is an economical corrosion-resistant anchor. They are suitable for light steel construction and temporary scaffolding installation. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/metal/anchor09/?parent_url=https://sanko-techno.co.jp/products/fastening/metal/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration (free) is required.

The "CT Anchor CT/SCT/GT/SGT/GT-D type" is suitable for lightweight construction work and temporary scaffolding installation. The "CT type" is a steel internal cone driven anchor, the "SCT type" is a stainless steel internal cone driven anchor, the "GT type" is a steel internal cone driven anchor that allows for flush installation, the "SGT type" is a stainless steel internal cone driven anchor that allows for flush installation, and the "GT-D type" is a steel internal cone driven anchor with hot-dip galvanized treatment that allows for flush installation. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/metal/anchor06/?parent_url=https://sanko-techno.co.jp/products/fastening/metal/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration (free) is required.

The "CD Method Stud Welding System" can instantly weld metal studs of various materials to the same or different base metals, allowing for the creation of external and internal threads. Welding is completed in 3/1000 to 6/1000 seconds, resulting in minimal thermal impact on the base material, making it possible to weld even on the backside of thin base materials or those finished with paint or plating. By setting the welding gun according to the stud material and simply pulling the trigger, welding can be performed without any qualifications or experience. 【Features】 ■ Compatible with studs made of mild steel, stainless steel, brass, aluminum, and titanium. ■ The welding gun is compact, lightweight, and easy to handle, allowing for vertical, horizontal, and corner applications. Additionally, the three legs make it easy to achieve perpendicular welding and positioning relative to the welding surface. ■ Welding can be performed without using any solvents such as flux. ■ Four shapes of studs are available: straight, flange, internal thread, and insulweld pin. *For more details, please refer to the product documentation. If you would like a demonstration, please apply through the contact form.

The "Eagle Anchor EG / SEG type" is a threaded anchor specifically designed for AR chemical setters EA-350/500S/500/500W and EX-350/EX-400L. It maximizes the performance of adhesive resins and firmly anchors within concrete holes. It is suitable for bench fixing, sound barrier installation, and more. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/adhesion/anchor08/?parent_url=https://sanko-techno.co.jp/products/fastening/adhesion/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration is required (free).

The "Chemical Bolt CB-V/CB-VS type" is a dedicated anchor bolt for AR Chemical Setter and Denkaku Quick Capsule. By being cut from both ends, it enhances mixing performance, improves the center of gravity balance of the bolt during mixing, and has features that enhance workability. It is used for the installation of AR Chemical Setter, Denkaku Quick Capsule, and Seismic Eco Filler. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/adhesion/anchor10/?parent_url=https://sanko-techno.co.jp/products/fastening/adhesion/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration required (free).

The "AX type" is a screw-in anchor that opens up and strongly adheres vertically, making it ideal for non-combustible ALC panels. It is suitable for mounting lighting fixtures, exhaust vents, switch boxes, and more. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/other/anchor06/?parent_url=https://sanko-techno.co.jp/products/fastening/other/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration required (free).

The "AZ type" is a driven anchor that is evenly fixed to ALC panels and excels in tensile strength. It is suitable for mounting lighting fixtures, switch boxes, and more. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/other/anchor07/?parent_url=https://sanko-techno.co.jp/products/fastening/other/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration (free) is required.

The "ALC Drive ALD/FALD/CALD type" allows for perfect installation even in corner and edge areas. It uses a special screw thread with a wide pitch that enables drilling, tapping, and installation in one process. This ensures smooth installation on ALC panels and provides stable and high holding power. It is suitable for switch box installation, ventilation fan installation, and hanging fasteners. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/other/anchor05/?parent_url=https://sanko-techno.co.jp/products/fastening/other/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration required (free).

The "MG type" is made of 100% nylon, is rust-proof, rot-proof, and does not change in quality, featuring a screw-in plug. It has an internal guide to prevent wood screws from protruding during installation, and two wings to prevent co-rotation. It is suitable for mounting handrails, washbasins, lighting fixtures, and more. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/other/anchor10/?parent_url=https://sanko-techno.co.jp/products/fastening/other/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration required (free).

The "SPS type" is a driven plug that opens up when struck and firmly secures itself. It features easy installation by simply hammering it in, can be easily removed with just a screwdriver, and demonstrates stable holding power. It is suitable for mounting handrails and lighting fixtures. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/other/anchor12/?parent_url=https://sanko-techno.co.jp/products/fastening/other/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration is required (free).

The "All Plug MILT type" is a resin-made, corrosion-free, easy-to-install screw-in plug. It is suitable for shelf installation, indoor decorative item installation, bulletin board installation, and more. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/other/anchor11/?parent_url=https://sanko-techno.co.jp/products/fastening/other/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration (free) is required.

The "AS type" is a screw-in plug bolt that allows for easy attachment and detachment of bolts and can be reworked. It features reliable bolt tightening and excellent corrosion resistance. It is suitable for mounting control panels, washbasins, bulletin boards, and more. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/other/anchor09/?parent_url=https://sanko-techno.co.jp/products/fastening/other/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration required (free).

The "IT Hanger" features a screw body and roll plate of the same diameter, allowing for installation while the mounted object remains in place. We offer a lineup that includes the "IT Type/IT-S Type" for hollow structure fasteners and the "ITW-S Type," which has a W structure plate. Made entirely of steel (stainless steel), it excels in fire resistance. It is suitable for handrail fastening, rain gutter installation, and bracket fastening. For more details, please refer to our website. 'IT/IT-S Type/ITW-S Type' https://sanko-techno.co.jp/products/other/anchor14/?parent_url=https://sanko-techno.co.jp/products/fastening/other/

The "ITL-W/ITL-M type" is an IT hanger for ALC panels that provides stable holding power through penetrating construction. It features adjustable bolt embedding depth that does not damage the ALC panels, and good workability due to its spring effect. It is suitable for the installation of equipment and for securing hanging materials. For more details, please contact us or view the catalog on our website: https://sanko-techno.co.jp/products/other/anchor15/?parent_url=https://sanko-techno.co.jp/products/fastening/other/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration is required (free).

"Board fasteners" are fasteners that feature easy installation, uniform finishing, and the ability to easily attach and detach screws. The "Type B" is a steel clamping-type board fastener that can be fixed to hollow wall surfaces. The "Type BS" is a stainless steel clamping-type board fastener suitable for areas requiring corrosion resistance. They are suitable for mounting lighting fixtures, audio equipment, and shelf brackets. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/other/anchor19/?parent_url=https://sanko-techno.co.jp/products/fastening/other/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration required (free)

The "TM type" is a clip-fixed anchor that allows for the installation of fixtures on any wall surface. The "BT/BTP type" is a screw-in tap that offers easy installation with just a screwdriver, requiring no pre-drilling, making it highly efficient to work with. The "TM type" is suitable for installing lighting fixtures and towel hangers, while the "BT/BTP type" is ideal for installing towel hangers and curtain rails. For more details, please refer to our website. 'TM type' https://sanko-techno.co.jp/products/other/anchor08/?parent_url=https://sanko-techno.co.jp/products/fastening/other/ 'BT/BTP type' https://sanko-techno.co.jp/products/other/anchor20/?parent_url=https://sanko-techno.co.jp/products/fastening/other/

The Easy Anchor EZ-I is a post-installed anchor for hanging objects that conforms to various standards and specifications (public construction work), featuring easy installation with power tools and a function that allows both the installer and the manager to visually confirm the completion of the installation. 【Features】 ● Conforms to various standards and specifications Complies with various standards and guidelines such as the standard drawings for public building equipment construction (standard type). ● Visual confirmation of anchor installation completion When tightened with an impact driver, a check ring that protrudes a certain amount allows for visual confirmation of the anchor installation completion. ● Visual confirmation of hanging bolt screwing When screwing in the hanging bolt, a bolt checker that protrudes from the high nut at two points allows for visual confirmation of the proper screwing length.

"Easy Installation" - Can be tightened with an impact driver (14.4V or 18V) * Please prepare commercially available hex bits separately. "Visual Confirmation" - Installation is complete when the check bolt contacts the top of the main body. - Installation is possible even from above the mounted object. - Exhibits stable strength with the "following expansion function" that follows tensile force and opens the expansion part.

The Easy Ice Screw Anchor is tightened with an impact driver, and the installation is complete when the check ring protrudes. There is no need to manage torque values or strike the anchor, making both installation and supervision easy. Additionally, when the hanging bolt is inserted, a colored bolt checker protrudes, allowing for visual confirmation of the screw engagement. Due to its screw type design, the drilling diameter is smaller than that of conventional products (EZI-CN), which improves workability.