ルミテクノ List of Products and Services

Slim double-sided LED light panel. This is a slim double-sided light panel with a thickness of 24mm and a visible width of 22mm. It is ideal for hanging in store windows, enhancing advertising effectiveness by displaying visuals both outside and inside the store.

• Signs, banners, lanterns, and curtains
• LED lighting
• LED Module

Easy media exchange with a door opening and closing. Outdoor LED light panel.

• Lighting for image processing
• LED lighting
• Indicator Light

Outdoor LED light panel. It has a built-in AC adapter and can be used immediately with AC power supply. Ideal for outdoor signs and displays. It uses an LED light guide plate method, providing uniform illumination without shadows on the panel surface. The exchange of printed media is easy with a front door that opens and closes. Sizes can be custom ordered from a minimum of 600mm x 600mm to 2000mm x 3000mm.

• Other lighting equipment
• LED lighting
• Lighting for image processing

This is a light guide panel type LED panel with LED chips directly inserted into the light guide plate. It can be used as a lightweight surface light source with fewer components. The shape can be freely designed, and light guide characters can also be created. Signage can also be produced. The color temperature (color tone) can be changed. By connecting them together, you can create a long surface light source without gaps. It is ideal as an alternative light source for existing signs, display lighting, and architectural lighting. Please use it for backlighting decorative lighting at counters or backlighting for parapets.

• LED Module
• Lighting for image processing
• LED lighting

This is a light guide panel type LED panel with a heat dissipation frame only at the insertion part of the LED chip. It can be used as a lightweight surface light source with fewer components. By connecting areas where LED chips are not inserted, it is also possible to create a larger surface light source. It is ideal as an alternative light source for existing signs, fixture lighting, and architectural lighting.

• LED Module
• Other inspection equipment and devices

The L-shaped aluminum heat sink is grounded on the back of the light guide plate to adhere to the light guide plate and absorb the heat dissipation from the LED chip. The light guide plate section consists of a 5mm light guide plate, a reflective sheet, and a backing plate, making it only 6mm thick, which is thinner and more flexible than any LED panel. The chip insertion area is also very thin, with a thickness of just 7mm, making it an extremely thin surface light source. One of the features of the L-angle heat sink frame is that it does not intrude into the front of the light guide plate, allowing the entire light guide plate to be utilized for illumination. (Additionally, the maintenance of the L-angle heat sink frame is very simple, making it easy to address any issues that may arise.)

• Other lighting equipment
• LED lighting
• Lighting for image processing

This is a light guide plate type LED panel surrounded by an aluminum frame. It is a slim surface light source with a 4mm light guide plate set in a 7mm thick frame. The LED light module consists of a 4mm light guide plate, LED chips, and a heat dissipation frame, providing bright illumination with a surface brightness uniformity of over 80% and a color rendering index (Ra) of over 82, resulting in vibrant colors. It is ideal as an alternative light source for existing signs, display lighting for store fixtures, and architectural lighting.

• Lighting for image processing
• Other lighting equipment
• LED lighting

The diffusion plate is ideal for use in inspection and research applications where LED panels are required to provide a uniform bright surface light source. Our LED panels utilize a light guide plate method, allowing the panel surface to emit light uniformly, making them suitable for various inspection and research applications. The light guide plate method involves shining light from LED chips onto a light guide plate (made of acrylic) that has a dot-patterned module printed on it, enabling efficient and even illumination of the entire panel surface with a minimal number of LED chips. The LED panel, with its low power consumption and high luminous efficiency, is an extremely eco-friendly light source. Additionally, by using a variable dimmer, you can adjust the brightness of the panel surface as desired, and we can also provide optimal surface light sources by drilling holes or modifying the light guide plate. Please feel free to contact us for more information.

• LED Module
• Other lighting equipment
• Lighting for image processing

This is a light guide plate LED panel with a heat dissipation frame only at the insertion part of the LED chip. It can be used as a lightweight surface light source with few components. It can be connected without gaps to create a long surface light source. It is ideal as an alternative light source for existing signs, fixture lighting, and architectural lighting. Please use it as backlighting for decorative lighting on counters or for parapet backlighting.

• Lighting for image processing
• Other lighting equipment
• LED lighting

The double-sided illuminated light guide panel LED signs are ideal for hanging signs and projecting signs. The frames are available in corner right-angle type and corner rounded type. SB22 type: visible width 22mm, thickness 24mm SB25 type: visible width 22mm, thickness 27mm SB45 type: visible width 18mm, thickness 48mm SB50 type: visible width 31mm, thickness 50mm BS90 type: with sleeve type BS95 type: guide sign type

• Other lighting equipment
• LED lighting

The diffusion plate is optimal for use as a uniform bright surface light source for inspection and research purposes with LED panels. Our LED panels utilize a light guide plate method, allowing the panel surface to emit light uniformly, making them suitable for various inspection and research applications. The light guide plate method involves shining light from LED chips on the side of a light guide plate (made of acrylic) that has a dot-patterned module printed on it, enabling efficient and uniform illumination of the entire panel surface with a minimal number of LED chips. The LED panel, with its low power consumption and high luminous efficiency, is an extremely eco-friendly light source. Additionally, by using a variable dimmer, you can adjust the brightness of the panel surface as desired, and we can also provide optimal surface light sources by drilling holes or altering the light guide plate. Please feel free to contact us.

• LED Module
• Other lighting equipment
• Lighting for image processing

This is an LED panel with a diffusion plate specification featuring aluminum frames of widths 23mm and 28mm. The SFR series is designed with safety in mind, as the four corners of the frame are rounded to reduce the risk of injury. The standard frame is used not only in commercial facilities such as stores but also to make the light guide plate invisible by using a diffusion plate, and it is also utilized as a light source for inspections in factories and research institutions. With a size approximately A2 and a brightness of over 4000 Lux, it is an excellent LED panel that excels in design, performance, and quality, known as the "LED light panel with diffusion plate specification."

• Lighting for image processing
• LED lighting
• LED Module

This is a light guide panel type LED panel with a heat dissipation frame only at the insertion part of the LED chip. It can be used as a lightweight surface light source with few components. It allows for the creation of long surface light sources without light gaps through connected connections. It is ideal as an alternative light source for existing signs, display lighting, and architectural lighting. Please use it for backlighting decorative lighting at counters or for backlighting parapets. Since it has a diffusion plate specification, it emits a uniform white light when lit, and the dot modules of the light guide panel are not visible. Additionally, you can apply illuminated sheets to the surface of the diffusion plate for use.

• LED Module
• Other inspection equipment and devices

弊社のLEDライトパネルは精度の高いLEDチップと効率の良い導光板により、平均板面照度3500Lux以上、光源面の輝度均一度８0％以上で全体に輝度ムラの少ない高輝度面発光の照明パネルです。 LEDの光と導光板を使用したLEDパネルは明るく消費電力が少ないので非常に環境にも優しい製品です。 サインパネルのバックライト光源に最適で平均寿命50,000時間で5年８ヶ月以上メンテナンスフリーで使用いただけます。10年以上ご使用いただいている店舗や商業施設もございます。 高輝度で輝度ムラの少ない導光板は、拡散板を用いて導光板＋拡散板仕様とすることでより輝度ムラを少なくします。検査用の光源として国内外の大手メーカー様の工場で永年ご使用いただいております。

• LED Module
• Other lighting equipment
• Lighting for image processing

This is an LED panel with a standard frame width of 23mm. The SFR series features safety considerations, with R-shaped processing applied to the four corners of the frame, reducing sharp edges and minimizing the risk of injury. The standard frame is used not only in commercial facilities such as stores but also employs a diffusion plate to make the light guide plate invisible, making it suitable as a light source for inspections in factories and research institutions. It is approximately A2 size with a brightness of over 4000 Lux, making it an excellent LED panel in terms of design, performance, and quality, known as the "LED Light Panel (SFR23)."

• Lighting for image processing
• LED lighting
• LED Module

フレーム幅28mmの大型用フレームの導光板式LEDパネルです。 羽根を開いたフレーム周囲に取付穴が有ります。 SFRシリーズの特徴は安全に配慮し、フレームの４つの角にR加工処理を施してあるため尖っておらず怪我のリスクを減らしております。 標準より5mm発光面へのフレームの食い込みは大型LEDパネルとなっても前面アクリルやメディアのズレ・落下を防ぎます。また、導光板の周囲4方向に壁面取付用取付穴を設置することができますので簡単に壁面設置をしていただくことができます。

• Other lighting equipment
• Lighting for image processing
• LED lighting

SFR23,SFR28の23mm幅,28mm幅フレームのLEDライトパネルです。 厚みは共に24mmで連結取付が可能です。 ショッピングセンターやサービスエリアなどのフードコートのメニューサインに最適です。 パネル間の隙間が必要ありませんので、一体感のあるメニューサインに仕上げります。 また、SFRシリーズの特徴は安全に配慮し、フレームの４つの角にR加工処理を施してあるため尖っておらず怪我のリスクを減らしております。 サイズの特注製作が出来ますので、施設の柱間などにあわせて隙間無く設置可能です。デザイン、性能、品質と共に優れたLEDパネル、"LEDライトパネル(SFR23型)(SFR28型）"です。

• Lighting for image processing
• LED lighting
• LED Module

The diffusion plate is ideal for use in inspections and research applications as a uniform bright surface light source for LED panels. Our LED panels utilize a light guide plate method, allowing the panel surface to emit light uniformly, making them suitable for various inspection and research purposes. The light guide plate method involves shining light from LED chips onto a light guide plate (made of acrylic) that has a dot pattern printed on it, enabling efficient and even illumination of the entire panel surface with a minimal number of LED chips. The LED panel, with its low power consumption and high luminous efficiency, is an extremely eco-friendly light source. Additionally, by using a variable dimmer, you can adjust the brightness of the panel surface as needed, and we can also provide services such as drilling holes or altering the light guide plate to create the optimal surface light source. Please feel free to contact us.

• LED Module
• Other lighting equipment
• Lighting for image processing

周囲が放熱フレームで囲まれた導光板式のLEDパネルです。 固定し易いように取付穴を周囲の放熱フレームに開けました。 4mmの導光板とLEDチップ、放熱フレームから構成されたLEDライトモジュールですが明るく、板面の輝度均一度80%以上の均斉度抜群のLEDパネル。 放熱フレームの厚さはわずか7mmで薄型の面光源となります。 検査機器の光源や各施設の既存サインの代替光源。店舗の什器照明。建築化照明などの光源として最適です。 LEDチップの演色性はRa80以上の高演色です。自然光近く対象物が自然に見えます。色温度は3000K,4000K,5000K,6500K,8000Kが選べます。

• LED Module
• LED lighting
• Lighting for image processing

It is a light guide plate type LED panel surrounded by a heat dissipation frame. The LED light module consists of a 4mm light guide plate, LED chips, and a heat dissipation frame, providing bright illumination with a panel brightness of over 80%. The thickness of the heat dissipation frame is only 7mm, making it a slim surface light source (9mm with a diffusion plate). It is ideal as an alternative light source for existing signs, display lighting for store fixtures, and architectural lighting.

• Lighting for image processing
• others
• Other lighting equipment

導光板方式を使用した広範囲発光するLEDパネルです。 LEDライトシートのLEDチップ挿入部以外は放熱フレームがついておらず光源面を並列させることができます。 最軽量のモデルではありますが効率の良い発光原理と質の高いLEDチップを使用しておりますので非常に明るく消費電力が少ない省エネの製品です。 板面の色温度は3000K(電球色)/4000K(蛍光灯白色)/5000K(昼白色)/6500K(標準白色)/8000K(少し青みのかかった白色)からお選びいただくことができます。

• LED lighting
• Other lighting equipment
• Lighting for image processing

You can choose from a minimum size of 100mm×100mm to a maximum size of 2400mm×1200mm, with color temperatures of 3000K, 4000K, 5000K, 6500K, and RGB full color for the panel surface. By finely configuring options such as a light guide plate with a diffusion plate specification that makes the dot pattern of the light guide plate invisible, you can select the optimal surface-emitting light source for your intended use. With a panel brightness uniformity of over 80%, the applications of the lightest and thinnest LED light sheets are prominent in architectural lighting and display fixture lighting in the architectural field, as well as embedded light sources in machinery in the manufacturing sector.

• Lighting for image processing
• LED lighting
• LED Module

This is a large LED panel with a light guide plate and a frame width of 28mm. It has mounting holes on all four sides for easy wall installation. When installed with the wings open, the mounting screws and holes are not visible when the wings are closed. The SFR series features corner components with approximately 1mm rounded edges at the four corners of the frame for safety, reducing the risk of injury. The media has a greater bite of 5mm into the frame compared to the SFR23, preventing misalignment or falling of the front acrylic or media even with a large LED panel. It is suitable for wall-mounted installation.

• Other lighting equipment
• Lighting for image processing
• LED lighting

From a minimum size of 200mm × 200mm to a maximum of 2400mm × 1200mm, with color temperatures of 3000K, 4000K, 5000K, 6500K, 8000K, and RGB full color, you can select the optimal surface-emitting light source for your application by finely configuring options such as the diffusion plate specification that makes the light guide plate printing invisible, the use of transparent light guide plates for double-sided emission, and wiring positions. The applications of LED light panels with a panel brightness uniformity of over 80% cover a wide range from commercial uses such as sign panels and POP advertising, backlight panels in custom frames, to inspection light sources in factories and research fields. We will propose the optimal light source based on our extensive achievements and experience in all these areas.

• LED Module
• Other lighting equipment
• LED lighting

LEDライトパネルの特注仕様 ご自由に選んでいただけるサイズ・板面の色温度（LEDチップ）・フレーム幅・厚み・などを選択いただいて製作する、LEDライトパネルの特注仕様です。 その他の特殊加工として、導光板印刷が見えなくなる「導光板＋拡散板仕様(-LDP)」「壁面取り付け仕様(-R)」などのオプションを細かく設定することでお客様の使用用途に最適な面発光の光源をご選択していただくことができます。 板面輝度均一度80%以上のLEDライトパネルの使用用途はサインパネルやPOP広告のバックライトパネル、工場や研究分野での検査用光源など商用から検査・研究用とまで幅広くカバーしております。10年以上の販売実績と多くの出荷台数で最適の光源をご提案させていただきます。 弊社のLEDライトパネルは壁面に埋込方法で使用いただけます。 埋込の場合はフレーム厚の2/3程度（24mmタイプで15mm程度）埋込しましても、前面羽根扉が開閉できますので、高級感のある埋込コルトンのようにご使用頂けます。

• LED Module
• Other lighting equipment
• LED lighting

This is a LED panel with a high-quality wood grain sheet finish. It has mounting holes on all four sides for easy wall installation. When installed with the wings open, the mounting screws and holes are not visible when the wings are closed. The SFR series features corner components with approximately 1mm rounded edges for safety, reducing the risk of injury. The media has a deeper frame engagement of 5mm compared to the SFR23, preventing misalignment or falling of the front acrylic or media. It is suitable for wall mounting in retail environments.

• Other lighting equipment
• Lighting for image processing
• LED lighting

By rounding the four corners, it can be safely introduced to a reachable position. (The corner rounding process does not create a rounded form.) The built-in AC adapter has the power plug coming out from the main unit. It can be used with household power sources of AC 100V-240V 50/60Hz. You can choose the color temperature of the LED chip from 3000K, 4000K, 5000K, 6500K, or 8000K. The frame color of the main unit can be selected from aluminum silver, white, or black.

• Lighting for image processing
• Other lighting equipment
• LED lighting

The double-sided illuminated light guide panel LED sign is ideal for hanging signs. Considering safety, the frame is designed for large sizes, and frame colors are available in aluminum, black, and white. We can provide estimates and production for one unit or more in your desired dimensions.

• Other lighting equipment
• LED lighting
• Display

This is a light guide plate type LED panel with a built-in AC adapter in a semi-recessed frame. It is a semi-recessed type with a thin panel installation. Since the AC adapter is built-in, there is no need to place an external power supply, and it can be used with a household outlet of AC 100-240V 50/60Hz.

• Other lighting equipment
• LED lighting
• Lighting for image processing