アイエムティー List of Products and Services

Compactly stored next to the grinding device. Equipped with functions for adjusting supply time, flow rate, and drop interval, as well as a polishing agent recovery feature through pump reversal. The simple operation with just three buttons makes polishing more comfortable. Please feel free to consult us about applications for dripping liquids other than polishing agents!

• Other inspection equipment and devices

We would like to introduce our product, "Alumina Grinding Paper." In April 2023, silicon carbide contained in SiC waterproof grinding paper became subject to management regulations under the Industrial Safety and Health Act, making it mandatory to keep work records for 30 years and to wear protective gear during work. This product frees workers from such cumbersome management. 【Specifications】 ■ Name: Alumina Grinding Paper ■ Size: φ200mm, φ223mm, φ250mm, φ305mm ■ Grit: #60, #80, #120, #220, #320, #400, #500, #600, #800, #1200, #1500, #2000 ■ Abrasive: Aluminum oxide ■ Notes: No adhesive, 50 sheets per pack *For more details, please refer to the PDF document or feel free to contact us.

• Other abrasives

According to a notification from the Ministry of Health, Labour and Welfare, it is mandated that individuals engaged in work involving carcinogenic substances must retain work records and other documentation for a period of 30 years, effective from April 1, 2023. Workers engaged in the manufacture or handling of substances that are clearly hazardous to health must be instructed to wear the following protective equipment: (1) Dust mask (2) Safety goggles (3) Protective gloves Please adhere to the laws and regulations of your local municipality regarding wastewater. Disposal will be classified as industrial waste. ■ Measures to reduce exposure levels must be minimized. As part of future initiatives with IMT, we will consider the following: (1) Examination of alternative products (2) Proposals for overall ventilation systems and local exhaust systems (3) Improvement of work methods We welcome inquiries regarding initiatives like those mentioned above, so please feel free to consult with us. *For more details, please do not hesitate to contact us.*

• others

Thinking he would be able to buy it, the guy from IMT came over with a grin. I decided to tease him a bit by mentioning that there was a competing candidate. His expression changed; he looked desperate. (laughs) He desperately promoted his achievements and features, sharing stories about a customer who embedded 5,000 units in 10 months. I told him, "I'll consider it." *In reality, it was already decided on IMT. (laughs)* Many of the same models had been delivered to our clients and affiliated companies, and it seemed my boss had heard good reviews, indicating that the track record was sufficient. Since the product is made in Japan, I would prefer to use Japanese-made equipment. The next day, I informed him that it was decided on IMT. "Thank you so much!!" I could hear him bowing over the phone. I could picture his happy face. I was also pleased. To be continued - Let's visit the IMT lab in Wakayama - Part 1

• Wafer processing/polishing equipment

One day, the heater temperature of the manual embedding machine wouldn't rise... it was broken... "I want to express my gratitude to the senior machine that was delivered before I was born. Thank you for your service." When I reported this to my boss... I was told to contact maintenance. "Really? Are we still making the senior work... please let it go!" I thought I could contact the guy from IMT... what a disappointment... Maintenance: "Unfortunately, we don't have the parts, so it's impossible." "I did it!" I made a small fist pump! My colleagues saw me and I turned red (laughs). I immediately called the guy from IMT. Actually, I had my eye on an automatic embedding machine for a while. It's called 'AgoraX.' Until now, embedding took about 25 minutes, but it solidifies in 8 minutes and comes out cool, reducing the risk of burns. Things were progressing smoothly with 'AgoraX,' but a competitor from overseas has emerged...

• Wafer processing/polishing equipment

"Cyrex" is a fully automatic polishing machine equipped with a grinding stone stage, polishing and lapping stage, automatic dressing mechanism for the grinding stone, and grinding amount adjustment mechanism as standard features. It achieves high throughput through simultaneous polishing at each stage. Each stage is equipped with a cleaning tank and drying tank as standard, preventing contamination from foreign substances from previous processes. It can flexibly accommodate various customizations. 【Features】 - Adopts PLC control with high design flexibility - Each process is equipped with a head, significantly increasing productivity - Holder stock can be selected as either conveyor type or stacked type - Large polishing machine available in 3 to 6 series options - Capable of stocking a large number of sample holders For more details, please contact us or download the catalog.

• Other physicochemical equipment

When we requested to borrow the demo unit, it was popular, and we had to wait for a rental reservation... Finally, it was our turn! The device looks a bit like a face, which is kind of cute lol. When we actually used it, the water that was supposed to be dirty from polishing became very clean. He said, "Even if you spray circulating water on a 1μm polishing cloth, it won't get scratched." I was skeptical, but when I tried it, it really didn't get scratched. I created a proposal incorporating SDGs. Since it was necessary to consider the environment, it was quickly approved and ordered— Even during delivery, he explained everything diligently, which was reassuring. I want to see him... 【To be continued】 -Manual embedding machine breaks-

• Wafer processing/polishing equipment

My company needed improvement... After I had gotten a bit used to the work, my boss presented a new challenge: "I want to do something about the drainage." I contacted IMT, and a salesperson came right away. As always, he greeted me with a refreshing smile, but I felt a bit nervous. "I need to pull myself together," I thought, switching my mindset back to work. When I asked, "How do other companies handle drainage?" I received an explanation that included examples from other companies. I can't say it out loud, but our company's drainage treatment is not good... It's bad. We have to improve somehow. Recently, there has been a need to address SDGs, and I was told that there are many questions like mine. They mentioned that there is a suitable product and introduced me to it. It's the "RYUZIN Filtration System." [To be continued in the next part]

• Wafer processing/polishing equipment

I had a worry that I might not be able to polish well. While recalling the days of polishing by hand, I listened to the salesperson's explanation. The result was that a task that used to take a whole day was shortened to about 30 minutes. The parallelism was also well established and satisfactory. I thought I could catch up to the senior's skilled techniques with this. With the polishing time reduced to one day, I was able to do other tasks, making work a bit more enjoyable. The seniors also started using it, and one machine was no longer enough. Overtime has decreased, and my private time has increased. In a fleeting moment, I think about wanting to meet that salesperson from IMT... And then the next challenge arises... 【To be continued】

• Wafer processing/polishing equipment

Every day after joining the company, I receive strict guidance on hand polishing from my supervisor. It's difficult to grind parallel, and it takes a whole day to finish just one piece. Colleagues from other departments often ask, "Why is that new employee standing there all day?" It's a bit tough... One day, I searched for sample polishing on Ipros and found IMT, which ranked first in the search results. When I requested information, a cheerful and friendly salesman came to see me right away and offered to help. He introduced me to the IM-P2 and SP-L1, providing detailed explanations. (For uses not listed in the catalog, please inquire.) I convinced my supervisor and got permission to conduct a demo of the IM-P2/SP-L1. [To be continued in the next part]

• Wafer processing/polishing equipment

We would like to introduce the "Hot Acrylic Resin" handled by IMT Corporation. Even after curing, it remains transparent, making it easy to distinguish samples, and after inspection, samples can be retrieved by applying ethanol. 【Features】 ■ Transparent, allowing for sample identification ■ Can be broken with ethanol for sample retrieval *For more details, please refer to the related links or feel free to contact us.

• Composite Materials

"Naraseru-kun" is a polishing buff cleaning stick with dimensions of L160mm W20mm T14mm. It is made of a soft material that does not damage the buff, allowing for easy customization of size with a cutter or similar tool. Simply press it against the buff on the polishing machine for easy cleaning, effectively removing any residual alumina/silica dirt from the buff. 【Features】 ■ Easy size customization with a cutter or similar tool ■ Simple cleaning by pressing against the buff on the polishing machine ■ Effectively cleans residual alumina/silica dirt from the buff ■ Size: L160mm W20mm T14mm *For more details, please refer to the PDF document or feel free to contact us.

• Other abrasives

The sample rotation machine M-05 is a revolutionary device that simplifies sample preparation. It allows for secure holding and thorough polishing without the need to embed specially shaped samples. You can also select the polishing process (recipe) in advance, so please feel free to consult us. 【Device Description】 ■ Connects to the manual polishing machine IM-P2. Shared power outlet 100V ■ Three-stage pressure setting for overall load ■ Rotational speed 0~200rpm ■ W510/D620/H730 ■ Safety cover option available 【Active in Various Fields】 ■ Product quality inspection ■ Polishing of physical property test samples ■ Mirror finishing of analytical samples ■ Polishing of steel, electronic components, heat treatment, semiconductors, etc. *For more details, please contact us below.

• Wafer processing/polishing equipment

Here are the reasons why our company is chosen. We primarily use domestic parts, which makes maintenance easy due to Japanese standards. It is also possible to dispatch dedicated technical staff on-site. Our meticulous work, characteristic of Japanese manufacturers, is complemented by prompt responses from sales staff who understand the technology. We thoroughly resolve customer dissatisfaction through close communication between sales and technical teams. 【Features】 ■ Detailed follow-up visits by sales representatives even after installation ■ Design and manufacturing at our headquarters in Wakayama Prefecture ■ Use of carefully selected domestic parts ■ Possibility of dispatching dedicated technical staff on-site ■ Prompt responses from sales staff knowledgeable in technology *For more details, please refer to the PDF materials or feel free to contact us.

• Wafer processing/polishing equipment

At IMT Corporation, we accept custom holder production. Based on our extensive data from past polishing achievements, we not only create but also deliver precise and reliable polishing. If you are a customer who wants to polish large samples, or if you want to polish many small samples, or if you have reasons that prevent embedding, please consult with us. 【Examples of polishers we can produce】 ■ Semiconductor wafer polishing machine ■ Surface polishing equipment for LCD panels ■ Shaft polishing equipment ■ Robot polishing machine *For more details, please refer to the related links or feel free to contact us.

• Wafer processing/polishing equipment

IMT Corporation handles the "RYUZIN Filtration System." This product is a cooling water filtration circulation device aimed at achieving sustainability in water. By incorporating a filter, it reduces cleaning tasks and minimizes industrial waste by allowing water to be reused in a continuous cycle. 【Features】 ■ Equipped with a filter ■ Reduces cleaning tasks ■ Reuses water in a continuous cycle ■ Capable of reducing industrial waste 【Specifications of RYUZIN】 ■ Width × Depth × Height: 284 × 480 × 454 ■ Weight: 30kg ■ Power supply: 100V 50, 60Hz ■ Air pressure: Air pressure 0.4–0.6MPa * Compressor required * For more details, please refer to the PDF document or feel free to contact us.

• Cooling system

IMT Corporation is a precision grinding equipment manufacturer headquartered in Wakayama. We previously had sales offices in Tokyo, Osaka, and Nagoya, but we have now decided to finally expand into Kyushu. Our company has been providing production equipment for the semiconductor and liquid crystal panel industries, as well as equipment for preparing materials for microscopic observation, for many years. Through our "domestic sample grinding machines" and "consumables for microscope sample preparation and grinding materials," we will consult on our customers' quality assurance operations. 【Features】 - Consistent support: A unified production system from design to assembly in-house - Speedy response: Detailed and prompt support *For more details, please download the materials or contact us directly.

• Wafer processing/polishing equipment

【Overview】 - Dedicated polishing staff available - Providing satisfactory polished surfaces based on accumulated polishing experience data - Proposing jigs as design and production are conducted in-house - Offering detailed polishing reports to clarify the polishing process 【Demo Process】 1. Preliminary meeting 2. Sample collection 3. Setting conditions 4. Demo (on-site or online)

• Wafer processing/polishing equipment

We would like to introduce our precision grinding polishing pad "Rock" that we handle. It is suitable for shortening the grinding process and can accommodate a wide range of materials and hardness (HV). It is a long-life product that emphasizes flatness and the grinding surface. Additionally, the sales unit starts from one piece, and we offer three sizes: Ф300mm, Ф250mm, and Ф200mm. 【Features】 ■ Compatible with a wide range of materials and hardness (HV) ■ Emphasizes flatness and grinding surface ■ Uses diamond abrasives for polishing ■ Ideal for shortening the grinding process ■ Long life *For more details, please refer to the PDF document or feel free to contact us.

• Other abrasives

The "DISK NEO" has achieved an increase in polishing speed and high flatness. The surface structure is an ultimate square, which reduces diamond penetration. It is suitable for polishing composite materials such as electronic materials. Additionally, it can be polished using only water. 【Features】 ■ Suitable for polishing composite materials such as electronic materials ■ Achieves high flatness ■ Increases polishing speed ■ Reduces diamond penetration ■ Can be polished using only water *For more details, please refer to the PDF document or feel free to contact us.

• Other abrasives

The "Cyhawk" is a diamond polishing pad that features a magnetic disc attachment and double-sided tape application. With a new abrasive grain pattern, the polishing speed and flatness have significantly improved. Special particles are mixed with the diamond abrasives to achieve excellent grinding power. It can be used with just water, like sandpaper. 【Features】 ■ Can be used with just water, like sandpaper ■ Polishing speed and flatness have significantly improved with the new abrasive grain pattern ■ By using Cyhawk Mid <#1500>, the intermediate process of "slurry + buff" can be replaced with just this one pad ■ Outstanding long life (equivalent to more than 150 sheets of sandpaper) ■ Special particles mixed with diamond abrasives achieve excellent grinding power ■ High quality and high performance, made in Japan *For more details, please refer to the PDF document or feel free to contact us.

• Other abrasives

We would like to introduce our new resin products. The fast-drying acrylic resin "Falcon F1" has a mixing ratio of 2:1, a curing time of approximately 10 to 20 minutes, and a heat resistance of 100°C. Additionally, we also offer hot resin products such as "Carbon-filled Phenolic Resin," "Epoxy Resin," and "Diallyl Resin." 【Falcon F1 Features】 ■ Two-component room temperature curing resin ■ Mixing ratio: 2:1 ■ Curing time: approximately 10 to 20 minutes ■ Heat resistance: 100°C ■ Hardness after curing: hardness 82 ■ Heat generation temperature (HDD82) *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

"Araeru-kun" is a sponge designed for cleaning samples, gently removing dirt without scratching the polished surface. The material is polyurethane, and the size is 9.0cm (H) x 7.0cm (W) x 3cm (D). It has excellent foaming and tactile qualities, making it a perfect match for cleaning after sample polishing. 【Features】 ■ Excellent compatibility for cleaning after sample polishing ■ Gently removes dirt without scratching the polished surface ■ Good foaming and tactile qualities ■ Material: Polyurethane ■ Size: 9.0cm (H) x 7.0cm (W) x 3cm (D) *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our surface grinding machine, 'Cyrex-G', which uses grinding wheels. It comes with a safety cover that protects the body from high-speed rotating objects, and the holder rotation speed ranges from 60 to 200 rpm. Additionally, it features a 50L tank for circulating cooling water. IMT, although small in scale, responds to customer requests with a consistent and meticulous "manufacturing" system and a sense of speed. 【Specifications (partial)】 ■ Power supply: Three-phase 200-220V 50/60Hz ■ Air: Requires an air source of 0.5MPa or more ■ Holder rotation speed: 60-200 rpm ■ Maximum sample holder diameter: φ200mm ■ Grinding wheel rotation speed: 800-1700 rpm *For more details, please refer to the PDF document or feel free to contact us.

• Other physicochemical equipment

The "Cyrex-8" is a fully automatic polishing machine that can make two types of changes during a single polishing process. It is possible to set the machine to gradually increase pressure for a few seconds right after the polishing starts (e.g., 15 seconds) and then gradually decrease pressure for a few seconds before finishing (e.g., 10 seconds). We also accept requests for the production of holders with hole shapes tailored to the samples, such as leveling machines and sample holders, so please feel free to consult with us. 【Polishing Unit Specifications】 ■ Holder Size: MAX. φ200mm ■ Disc Size: φ250, 300, 310mm ■ Primary Side Air: Requires an air source of 0.5MPa or more ■ Power Supply: Three-phase 200-220V 50/60Hz ■ Dimensions/Weight: W830×D855×H1730mm / Approximately 450kg *For more details, please refer to the PDF document or feel free to contact us.

• Other physicochemical equipment

We would like to introduce our product "NEO." This product is a diamond wrapping film that can be used for fine polishing with fixed abrasive particles. We offer particle sizes of 0.5μm, 2μm, and 9μm. For more details, please refer to the related catalog. 【Sizes】 ■203 ■229 ■154 ■305 *For more information, please refer to the PDF document or feel free to contact us.

• Hand polishing and filing

We would like to introduce our "Plate Cross" that we handle. This product is a polishing cloth with a metal plate that can be attached to a magnetic disc for use. We offer a wide range of options, including natural silk "Kaga," wool "Senba," and "Silica Final." For more details, please refer to the related catalog below. 【Features】 【Lineup (partial)】 ■ Kaga: Natural silk ■ Senba: Wool ■ Tosa: Non-woven fabric ■ Azai: Non-woven fabric, suede ■ Rapt: Acetate *For more information, please refer to the PDF materials or feel free to contact us.

• Hand polishing and filing

We would like to introduce our "Polishing Cloth" that we handle. This product uses 100% Japanese-made materials, achieving high reproducibility. It employs an adhesive that makes it easy to peel off from the disc. For more details, please refer to the related catalog below. 【Lineup (partial)】 ■ Kaga: Natural Silk ■ Senba: Wool ■ Tosa: Non-woven Fabric ■ Azai: Non-woven Fabric / Suede ■ Rapt: Acetate *For more information, please refer to the PDF document or feel free to contact us.

• Hand polishing and filing

Easy grinding amount control by simply fitting the resin-embedded sample. High-precision sample adjustment is possible with hand polishing. Samples can be created without compromising the target position, allowing for grinding of 1mm per rotation with a scale of 5μm. The stop ring is made of tungsten carbide. 【Features】 ■ Samples can be created without compromising the target position. ■ Flat grinding surfaces can be created with a carbide ring. ■ Grinding of 1mm per rotation with a scale of 5μm is possible. ■ Can be used with the automatic polishing machine "KIRIME" for automatic polishing. ■ The stop ring is made of tungsten carbide. *For more details, please refer to the PDF document or feel free to contact us.

• Grinding Machine

We would like to introduce the "Back Grind Tape" handled by IMT Corporation. It protects the surface of important samples and can be easily removed. In cases where both sides of the sample need to be polished, you can apply this product after polishing one side to protect it and then polish the opposite side. 【Features】 ■ Protects the surface of important samples ■ Can be easily removed ■ In cases where both sides of the sample need to be polished - Apply this product after polishing one side to protect it and then polish the opposite side *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• others
• Adhesive tape

We would like to introduce "Tsukameru-kun," handled by IMT Corporation. It can be softened by warming it in hot water, allowing you to freely shape it, and it can be used repeatedly. It can be hardened and polished to serve as a handle for small samples, and then melted and removed. 【Features】 ■ Can be softened in hot water and shaped freely ■ Reusable multiple times ■ Can be hardened and polished to serve as a handle for small samples, then melted and removed *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• others

We would like to introduce "Light Lubricant," handled by IMT Corporation. This product is a water-free lubricant. We offer two sizes: 1L and 5L. It is suitable for soft metals and samples where water cannot be used. 【Lineup】 ■1L ■5L *For more details, please refer to the PDF document or feel free to contact us.

• Lubricants
• Other consumables

We would like to introduce our product, "Lubricant AO (Alcohol-based)." This product is an alcohol-based lubricant, available in two sizes: 1L and 5L. Please use it as a spreading liquid for diamond polishing agents. 【Lineup】 ■1L ■5L *For more details, please refer to the PDF document or feel free to contact us.

• Lubricants
• Other consumables
• Other abrasives

IMT Corporation offers the diamond spray "KAGAYAKI." It prevents rust as it does not contain moisture. It uses diamond abrasives with a uniform particle size distribution, allowing for a clean application. The amount of diamond abrasives is available in standard and save types. The save type has a slightly lower concentration of diamond abrasives. 【Features】 ■ Prevents rust as it does not contain moisture ■ Uses diamond abrasives with a uniform particle size distribution ■ Crystals: Polycrystalline standard ■ Amount of diamond abrasives: Standard type / Save type *For more details, please refer to the PDF document or feel free to contact us.

• spray
• Rust Inhibitor

Octo Plate with Gel for Adhesion of Abrasive Paper Simply place the adhesive-free abrasive paper onto the gel and place the plate with the abrasive paper onto the magnetic disc for easy use! Prevents shifting of the abrasive paper during grinding, reduces consumable costs through repeated use, and can also prevent entanglement by automatic machines. 【Octo Plate Lineup】 ■S53IM-200P: φ200mm ■S53IM-250P: φ250mm ■S53IM-300P: φ300mm For those without a magnetic disc, we also offer magnetic pads that can be attached to aluminum discs. *For more details, please refer to the PDF document or feel free to contact us.

• Other abrasives
• others

Vacuum Impregnation Device for Sample Grinding 'Gsn' [Made in Japan] 'Gsn' is a vacuum impregnation device that allows for the injection of resin in a vacuum state for embedding fine samples in epoxy resin. It features a slow-release valve that allows for a gradual return from vacuum to atmospheric pressure. The spacious chamber can accommodate seven of our φ30mm molding cups and allows for table rotation. [Features] ■ Spacious chamber that can hold seven of our φ30mm molding cups ■ Slow-release valve for gradual return from vacuum to atmospheric pressure ■ Table can be rotated *For more details, please refer to the PDF document or feel free to contact us.

• Vacuum Equipment
• Vacuum forming machine

The "KIRIME 250" is an automatic polishing machine that can perform two polishing styles with one unit. It features a Φ250mm disc and offers a lineup of various polishing discs including polishing discs (with pressure rings), lapping discs, and magnetic surface discs, which can be exchanged according to the application. The rotation speed is adjustable, with the disc operating at 50–500 rpm and the holder at 50–200 rpm (reversible). 【Disc Lineup】 ■ Polishing disc (with pressure ring) ■ Lapping disc ■ Magnetic surface disc *For more details, please refer to the PDF materials or feel free to contact us.

• Wafer processing/polishing equipment
• Other abrasives

We would like to introduce the "UP Colloidal Silica Abrasive" handled by IMT Corporation. This product uses silica classified as "not applicable" under the Industrial Safety and Health Act's managed chemical substances. The product is an abrasive that can be dispersed in various organic solvents such as alcohol. With a particle size of 0.045μm, it is resistant to aggregation and sedimentation, resulting in a transparent liquid. For more details, please feel free to contact us. 【Product Lineup (Volume)】 ■1L ■5L *For more information, please refer to the PDF document or feel free to contact us.

• Wafer processing/polishing equipment
• Other abrasives

We would like to introduce the "IMT Colloidal Silica Polishing Agent" handled by IMT Corporation. This product uses silica classified as "non-regulated" under the Labor Safety and Health Act. The product is a final polish solution for sample polishing with a pH of 9 to 10 and a particle size of 0.08 μm. By using it in conjunction with the polishing cloth "Silica Final," it achieves the highest level of polished surface. 【Product Lineup (Volume)】 ■1L ■5L *For more details, please refer to the PDF document or feel free to contact us.

• Wafer processing/polishing equipment
• Other abrasives

The "GI-Do" is a fully automatic embedding machine that can embed a large number of samples automatically, producing finished samples of equal height. It is equipped with a numbering engraving function and also supports QR code engraving as an option. A large number of prepared samples can be held on a rotating table, where the volume of each sample is automatically measured, and the amount of resin is automatically adjusted. 【Features】 ■ A large number of prepared samples can be held on a rotating table ■ The volume of each sample is automatically measured, and the amount of resin is automatically adjusted ■ Equipped with a numbering engraving function ■ Optionally supports QR code engraving ■ Gas release during embedding can also be set with conditions *For more details, please refer to the PDF document or feel free to contact us.

• Special Processing Machinery
• Other processing machines

"Rana-5" is an individual load type automatic polishing machine equipped with a standard automatic water supply function. The polishing section and sample rotation section are common specifications with "Rana-3," but the head mechanism is robust with LM guides, making it less prone to lateral shaking during polishing and providing high rigidity. The waterproof model comes with a touch panel and an emergency stop button, and the digital version allows for automatic stop via a timer. It can store 16 polishing conditions and allows for two-step operation settings during polishing. 【Specifications】 ■ Power supply: Single-phase 100V / Single-phase 220V ■ Dimensions/Weight: W450×D640 (to the back)×H520mm (610mm when head is raised) / 94kg ■ Water supply and drainage: Standard automatic water supply function included *For more details, please refer to the PDF document or feel free to contact us.

• Wafer processing/polishing equipment

"Agora XX" is an automatic embedding machine that has the same functions as "Agora X" and can create two samples simultaneously. It features a two-tube embedding type with a preheating setting mode. It can automatically embed from heating to cooling, and the water flow during cooling can be adjusted. 【Features】 ■ Has the same functions as "Agora X" ■ Can create two samples simultaneously ■ Two-tube embedding type ■ Includes preheating setting mode ■ Water flow during cooling can be adjusted *For more details, please refer to the PDF materials or feel free to contact us.

• Special Processing Machinery

"Murakumo" is a polishing pad that can be used with just water, like sandpaper, and maintains a stable grinding amount even during long hours of work. It has approximately twice the lifespan of conventional products and can accommodate a wide range of materials from soft to hard. It can polish everything from steel and automotive parts to non-metal materials with just one pad. It is ideal for use in quality control and development departments. Tasks that you thought could only be done with sandpaper may be replaceable with Murakumo. Its non-paper nature ensures a reliable high cost-performance ratio. Samples are currently available for loan. Please contact us using the information below. 【Features】 - Developed in-house using high-quality diamonds, made in Japan - No hardness changes that are likely to occur during polishing - Durability is about twice that of conventional products, equivalent to over 200 sheets of sandpaper in long life *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Other abrasives

The "Aqua Coolant Circulator" is a cooling water circulation filtration device equipped with two types of filters and a dual-chamber tank, offering three selectable types. Each chamber of the tank is fitted with a discharge valve for easy water disposal, making water replacement simple. It has a generous 45-liter tank. 【Features】 ○ Primary filter captures large debris → Equipped with a washable and reusable Saran Lock ○ Available in configurations with two outlet pipes and two return ports (for two polishing machines) ○ Safe ON/OFF switch with a leakage breaker ○ Capable of accommodating a 1μm filter For more details, please contact us or download the catalog.

• Other physicochemical equipment

The "λ-105" is a sample dryer with a high-power, large airflow nozzle-type outlet. The nozzle airflow is 1.6m³/min, the outlet is a φ10mm pipe nozzle, and the heater can reach a maximum temperature of 70℃. 【Features】 ○ Compact yet high-power large airflow nozzle-type outlet ○ The heater operates only when the blow is ON, equipped with a safety feature ○ Installation of a sensor switch and foot switch is possible For more details, please contact us or download the catalog.

• Other physicochemical equipment