アイエムティー List of Products and Services

The U-104 is a sample dryer (hot air dryer) that removes moisture from samples quickly, using a wind similar to that of an air knife. It is equipped with a clean air filter that removes dust and other particles from the air, preventing oxidation of the samples and maintaining the finished observation surface. 【Features】 - Quickly dries samples using the air knife method - High-capacity heater and blower dry samples in a short time - Prevents fires caused by forgetting to turn off the heater switch - Optional foot switch improves usability by allowing for foot switch installation For more details, please contact us or download the catalog.

• Other physicochemical equipment

"Agora X" is an automatic embedding machine that dramatically shortens the embedding time from heating to cooling. It is equipped with a memory function for 10 embedding conditions. It also includes an easy-to-use touch panel along with analog buttons. 【Features】 ○ Speedy embedding time ○ Capable of embedding epoxy resin ○ The upper lid (with upper ram) can be removed and cleaned For more details, please contact us or download the catalog.

• Other physicochemical equipment

The "GI-20" is a low-cost manual sample embedding machine that integrates the upper lid and upper ram. It features an auto-stop mechanism with a digital timer to prevent forgetting to turn off the heater. In the event of an emergency, it completely shuts down with a thermal fuse. 【Features】 ○ A handy hydraulic jack type with few failures ○ Adjustable heater temperature → It is possible to maintain a constant heater temperature during embedding. For more details, please contact us or download the catalog.

• Other physicochemical equipment

The "GI-10" is a manual sample embedding machine equipped with a water-cooled cooling mechanism as standard. It features an auto-stop system with a digital timer to prevent forgetting to turn off the heater. In the event of an emergency, it will completely shut down with a thermal fuse. 【Features】 ○ Embedding with transparent acrylic resin is possible ○ Reliable hand-operated hydraulic jack type ○ Adjustable heater temperature For more details, please contact us or download the catalog.

• Other physicochemical equipment

The "GI-Do" is a fully automatic embedding machine that repeatedly performs a series of processes, including transporting to the embedding press section, supplying embedding resin, molding through pressurization and heating, and printing sample identification on the resin after molding. The table of the loader-unloader section transports each sample through rotation and cylinders. 【Features】 ○ The resin supply hand moves onto the pressurization ram to supply resin. ○ Compression molding of resin and heating are possible with the pressurization ram. ○ After positioning is complete, it is transported to the printing section to print the set characters. For more details, please contact us or download the catalog.

• Other physicochemical equipment

"Cyrex" is a fully automatic polishing machine equipped with a 1-stage grinding stone plus polishing, 4 stages of lapping, an automatic dressing mechanism for the grinding stone, and a grinding amount adjustment mechanism as standard features. It achieves high throughput through simultaneous polishing at each stage. Each stage is equipped with a cleaning tank and drying tank as standard, preventing the transfer of foreign substances from previous processes. It can flexibly accommodate various customizations. 【Features】 ○ High design flexibility with PLC control ○ Significantly increased productivity ○ Large 6-station polishing machine ○ Capable of stocking a large number of sample holders For more details, please contact us or download the catalog.

• Other physicochemical equipment

The abrasive automatic supply device "Auto Drip Device" is a drip device that can automatically drop and collect abrasives. By adding it to the automatic polishing machine "KIRIME" or the polishing machine (with grinding amount control function) "Q-roy," automatic finishing polishing can be performed without the assistance of an operator. 【Features】 ○ The 5-tube type is equipped with an auto-change function → 16 dripping conditions can be memorized ○ The 1-tube type is available in two options: with or without a stirrer For more details, please contact us or download the catalog.

• Other physicochemical equipment

The "Q-roy" is a sample polishing machine that allows for the setting of grinding values in the Z-axis (height) direction for each of the three samples. It can set grinding values in units of 1μm and will automatically stop when the grinding value is reached. Automatic polishing is also possible in time mode. The operation is easy with a large button touch panel and convenient analog buttons. 【Features】 ○ Grinding value setting possible for each of the three samples ○ Polishing possible through time management ○ Automation with auto-drip polishing agent ○ Correction of grinding value errors is possible For more details, please contact us or download the catalog.

• Other physicochemical equipment

"KIRIME" is an automatic polishing machine that handles both overall load/individual load with two polishing styles in one unit. You can create an auto-change recipe by selecting and combining up to six memory conditions. It features easy operation with a large button touch panel. It is capable of communication and connection with an automatic abrasive drip device. 【Features】 ○ Two selectable polishing styles → Overall load method with high polishing power → Individual load method: pressurized legs for individual loads ○ Polishing disk cooling function included ○ Automation with automatic abrasive drip For more details, please contact us or download the catalog.

• Other physicochemical equipment

The "Rana-30" is a powerful automatic polishing machine equipped with a safe dual start button feature. It utilizes a 750W servo motor for the polishing section and a 120W brushless motor for the sample rotation section, achieving high torque, a maximum disk rotation speed of 400 rpm, and a maximum pressing force of 400N. It also includes a memory function for 16 polishing conditions and ABC settings (allowing operation during polishing to be set in three stages) for efficient work. 【Features】 ○ A powerful tabletop polishing machine with an overall load system ○ Capable of accommodating polishing discs with a maximum diameter of φ310mm ○ Designed with safety in mind, featuring a dual start button function ○ Optional parts that can be selected according to the sample For more details, please contact us or download the catalog.

• Other physicochemical equipment

The "Rana-3" adopts an individual load method and is a sample polishing machine that allows for the free setting of 1 to 6 samples. Since it is possible to change the holder rotation speed, the holder and disk can be polished at the same rotation speed, preventing the polishing surface from tilting or becoming pencil-shaped. Both the holder and disk can rotate in both forward and reverse directions. 【Features】 ○ Grinding can be performed without losing parallelism ○ Automatic increase and decrease of pressing force up to the set seconds ○ Three-stage variable polishing conditions (pressure/rotation speed) ○ Memory for 16 polishing conditions For more details, please contact us or download the catalog.

• Other physicochemical equipment

The "Eo2" is a two-disk device specifically designed for hand polishing. It features a table height that makes hand polishing easy, allowing for comfortable work. It is equipped with a motor that delivers strong torque even at high speeds and low ranges. It comes with two water supply taps and a drainage hose at the back. 【Disc Sizes】 ○ Polishing Disc: Φ223mm or Φ200mm ○ AL Polishing Disc: Φ200mm ○ Magnetic Surface Disc: Φ200mm For more details, please contact us or download the catalog.

• Other physicochemical equipment

The "SP-As1/As2" is a roller-type sample rotation device for mounting on the polishing machine IM-P2. When SP-As1 is attached to the polishing machine IM-P2 for non-embedded sample polishing, automatic polishing becomes possible. It is ideal for samples that require long-duration low-speed lapping. Custom holders tailored to the samples can also be manufactured. 【Features】 ○ Equipped with a swinging function → The swinging allows for light polishing, which extends the lifespan of the polishing cloth. ○ Automatic polishing of non-embedded samples is possible → Ideal for samples that require long-duration low-speed lapping. For more details, please contact us or download the catalog.

• Other physicochemical equipment

The "SP-L1" is a sample rotation device that can be attached to the polishing machine IM-P2, enabling automatic polishing during embedded sample grinding. It allows for changes in head rotation speed, enabling the holder and disk to be polished at the same speed, which prevents tilting of the polished surface and pencil-like shapes, allowing for grinding without losing parallelism. By adopting an individual loading method when grinding electronic materials down to observation lines (such as via holes), samples can be sequentially removed from the target position. 【Features】 ○ Adoption of individual loading method → Allows for a maximum set of 3 samples ○ Enables cutting of workpieces without losing parallelism ○ Semi-automatic polishing possible → Loop replicator included as standard For more details, please contact us or download the catalog.

• Other physicochemical equipment

The 『IM-P2』 is a tabletop polishing device specifically designed for hand polishing. It features an easily interchangeable disc and a table height that facilitates hand polishing. It is equipped with a motor that delivers strong torque even at high speeds and low speeds. The essential components of the polishing machine, the motor and inverter, are reliably made in Japan. It can also be transformed into an automatic rotating machine with an additional attachment! We can propose three types of automation attachments tailored to your company's needs. If you're interested, please check the pages for [SP-L1]/[SP-As]/[M-05]. 【Features】 ○ Polishing table height that is easy for hand polishing ○ Strong torque in both low and high-speed ranges (50–400rpm stepless speed change) ○ Easy disc replacement ○ Drip-proof ring is standard equipment 　Custom sizes and shapes can be made according to safety specifications (for a fee) ○ Rust-resistant resin cover ○ Design allows for easy replacement of consumable parts such as water supply taps and drainage hoses ○ A storage platform for consumables can also be attached * There is also a manual polishing machine 【IM-P3】 that can use Φ300mm discs. For more details, please contact us or download the catalog.

• Other physicochemical equipment

"KIRIME" is an automatic sample polishing machine that allows for overall load/individual load and offers two polishing styles. You can select up to six conditions from memory to create an auto-change recipe. It is ideal for producing high-precision samples necessary for quality improvement and the development of new materials. 【Features】 ■ Two selectable polishing styles 　・ Overall load method → A high polishing force overall load method. 　・ Individual load method → Capable of mounting up to six samples. ■ Equipped with a polishing disk cooling function ■ Capable of communication and connection with an automatic abrasive drip device ■ Demonstration machines are available at various locations in Tokyo, Nagoya, and Osaka for demonstrations All products are domestically produced, and maintenance and after-sales support are available on the same day. Additionally, based on our achievements in the semiconductor, LCD, electronics, and machinery industries, we can customize (special fixtures) and propose solutions according to customer requests. We also offer suggestions for optimal polishing conditions. *For product details, please request materials or view the PDF data available for download. A free technical document with sample polishing recipe selection guidelines is also available for download below.

• Wafer processing/polishing equipment

We offer a variety of polishing machines, including the automatic sample polishing machine "KIRIME." By optimizing the polishing conditions for samples, we achieve process reduction and improved accuracy. In terms of process reduction, there are cases where the conventional working time has been halved. Additionally, the improvement in polishing accuracy has resulted in better inspection results. This time, we are pleased to offer our customers the highly praised "Technical Book for Sample Polishing Recipe Selection Guidelines" as a special gift. <Reasons Why IMT's Polishing Machines Are Chosen> ■ All products are domestically produced. Maintenance and after-sales support are available on the same day. ■ We have various demonstration machines in Tokyo, Nagoya, and Osaka, making demonstrations possible. ■ Based on our track record in the semiconductor, LCD, electronics, and machinery industries, we can customize (special fixtures) and propose solutions according to customer requests. ■ We can also propose optimal polishing conditions. *Currently, we are also offering the "Technical Book Sample Polishing Recipe Selection Guidelines" for free, which can be viewed from the "Download" section.

• Wafer processing/polishing equipment

It holds thin samples that are difficult to stand on their own. It helps to keep the samples upright. It is an essential tool for sample polishing. *Can be used in conjunction with a molding cup.

• Other physicochemical equipment

This is a molding cup for embedding epoxy resin. It is a reusable silicone rubber type. Made of silicone rubber, it allows for easy removal of the resin.

• Other consumables

【ZeroMa-K Plus】 An ultra-low viscosity type with excellent permeability. Due to its superior adhesion, it is suitable not only for general use but also for fine samples such as electronic components. It takes time to cure, but it is a top performer in the ZeroMa series with low-temperature curing and good adhesion. 【ZeroMa-S】 A versatile resin with no peculiarities. A popular choice in the ZeroMa series, it is a low-cost, low-viscosity type. 【ZeroMa-TH】 Cures in a short time of 1.5 to 2 hours! It has high transparency, allowing for sample confirmation from the side. A new star in the ZeroMa series designed for those who want to finish work quickly with short curing times. In addition to these, there are other room-temperature curing resins. Supersonic acrylic resin 【Falcon】 A handy tool in the sample polishing world 【Tsukamerukun】

• Other laboratory equipment and containers

Please use it in conjunction with diamond slurry. By utilizing the lubricant, you can control the amount of diamond slurry used, which helps reduce costs. It is a water-soluble product that is safe and secure.

• Other physicochemical equipment

This is a diamond paste for sample grinding. It comes in a syringe-type container, allowing you to use only the amount you need. We offer it at an affordable price.

• Other abrasives

This is a product from one of the few diamond manufacturers in the world. It maintains a uniform particle size distribution thanks to an advanced grading system. The abrasive particles do not settle and maintain a stable colloidal state. Affordable pricing. An all-in-one type that does not require lubricants is also available.*1 Using the dedicated spray bottle (S90KS-0337) allows for efficient spraying without waste. Diamond suspension Poly & Mono. *Please purchase it together with the cloth for sample polishing.

• Other abrasives

It can be attached to a magnetic disc or affixed with double-sided tape, and can be polished with coolant. There is no need for the hassle of replacing like sandpaper, and flatness is significantly improved! By using Saihawk (#1500), this single piece can substitute for the intermediate process of "slurry + buff." It offers an overwhelming long life (equivalent to more than 150 sheets of sandpaper).

• Grindstone

Excellent sharpness and outstanding polishing power. This product offers very high cost performance.

• Other abrasives

It has a thin PET base with uniform thickness. It is ideal for precision finishing without grinding marks. It is used for final wrapping of electronic materials and composite materials.

• Other consumables

All materials are made in Japan, achieving the highest level of reproducibility. Silk: By using natural silk, polishing scratches are minimized to an extremely small size. Silica Final: The world's top-class final cloth for silica!! Splendid and fine polishing cloth [made in Japan]

• Other abrasives

Is there a person in charge of the electrical control department at your company? Our engineering department will handle it on your behalf.

• Calibration and repair

By replacing it with a new PLC, we can prevent production stoppages caused by failures of control equipment.

• PLC

● High throughput polishing is possible without selecting wafers ● Improved processing surface accuracy ● Chemical-free polishing is possible ● Removal of various films is possible ● Can be introduced into each process of wafer manufacturing

• Wafer processing/polishing equipment

This is a space-saving, low-cost tape-type precision grinding device specialized for bevel grinding and oil-free grinding.

• Wafer processing/polishing equipment

It is a full-spec tape-type precision polishing device compatible with Si wafers and the bevel, notch, and orientation flat of compound wafers.

• Wafer processing/polishing equipment