Levitronix Japan List of Products and Services

The "PuraLev 4000MU (Multi-Use)" is a groundbreaking pump series that does not have wear-prone bearings and does not use shaft seals that could leak. Based on the principle of magnetic levitation, the pump impeller floats non-contact within a sealed casing and is driven by the rotating magnetic field of the motor. It is configured with a multi-use pump head that allows for sterilization through Cleaning In Place (CIP) and Sterilization In Place (SIP). By adopting magnetic bearings instead of mechanical bearings and designing an independent pump head, the risk of contamination has been significantly reduced. 【Features】 ■ Low shear characteristics ■ Reduced contamination risk due to self-contained magnetic bearings ■ Pump that does not generate particulates ■ Does not create excessive pressure situations compared to roller pumps ■ The gap between the impeller and casing is not narrow enough to trap bacteria *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "PuraLev 2000SU (Single Use)" is a revolutionary pump series that does not have bearings that may wear out and does not use shaft seals that may leak. Based on the principle of magnetic levitation, the pump impeller floats non-contact within a sealed casing and is driven by the rotating magnetic field of the motor. The single-use pump head adopts a bayonet-type socket mechanism, allowing for intuitive and easy attachment and detachment. 【Features】 ■ Low shear characteristics ■ Reduced contamination risk due to self-contained magnetic bearings ■ Pump that does not generate particles ■ Does not create excessive pressure situations compared to roller pumps ■ The gap between the impeller and casing is not narrow enough to trap bacteria *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "PuraLev 2000MU (Multi-Use)" is a groundbreaking pump series that does not have bearings that may wear out and does not use shaft seals that may leak. Based on the principle of magnetic levitation, the pump impeller floats non-contact within a sealed casing and is driven by the rotating magnetic field of the motor. Both the impeller and casing are made of biocompatible high-purity fluororesin that can be sterilized using Clean-In-Place (CIP), Sterilize-In-Place (SIP), and autoclaving, which together form the multi-use pump head. 【Features】 ■ Low shear characteristics ■ Reduced contamination risk due to self-contained magnetic bearings ■ Pump that does not generate particulates ■ Does not create excessive pressure situations compared to roller pumps ■ The gap between the impeller and casing is not narrow enough to trap bacteria *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "PuraLev 600SU (Single Use)" is a groundbreaking pump series that does not have bearings that may wear out and does not use shaft seals that could leak. Based on the principle of magnetic levitation, the pump impeller floats non-contact within a sealed casing and is driven by the rotating magnetic field of the motor. The single-use pump head employs a bayonet socket mechanism, allowing for intuitive and easy attachment and detachment. 【Features】 ■ Low shear characteristics ■ Reduced contamination risk due to self-contained magnetic bearings ■ Pump that does not generate particulates ■ Does not create excessive pressure situations compared to roller pumps ■ The gap between the impeller and casing is not narrow enough to trap bacteria *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "PuraLev 600MU (Multi-Use)" is a groundbreaking pump series that does not have wear-prone bearings and does not use shaft seals that could leak. Based on the principle of magnetic levitation, the pump's impeller floats non-contact within a sealed casing and is driven by the rotating magnetic field of the motor. By adopting magnetic bearings instead of mechanical bearings and designing an independent pump head, the risk of contamination has been significantly reduced. The gap between the impeller and casing is not narrow, and with a low-shear pump design, it can gently transfer delicate liquids. 【Features】 ■ Low shear characteristics ■ Reduced contamination risk due to self-contained magnetic bearings ■ Pump that does not generate particulates ■ Does not create excessive pressure situations compared to roller pumps ■ The gap between the impeller and casing does not trap bacteria *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "PuraLev 200SU (Single Use)" is a revolutionary pump series that does not have bearings that may wear out and does not use shaft seals that could leak. Based on the principle of magnetic levitation, the pump impeller floats non-contact within a sealed casing and is driven by the rotating magnetic field of the motor. By adopting magnetic bearings instead of mechanical bearings and designing an independent pump head, the risk of contamination is significantly reduced. Additionally, the gap between the impeller and casing is not narrow, and the low-shear pump design allows for the gentle transfer of delicate liquids. 【Features】 ■ Low shear characteristics ■ Reduced contamination risk due to self-contained magnetic bearings ■ Pump that does not generate particulates ■ Does not create excessive pressure situations compared to roller pumps ■ The gap between the impeller and casing does not trap bacteria *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "PuraLev 200MU (Multi-Use)" is a revolutionary pump series that does not have bearings that may wear out and does not use shaft seals that may leak. Based on the principle of magnetic levitation, the pump impeller floats non-contact within a sealed casing and is driven by the rotating magnetic field of the motor. The pump casing employs tri-clamp fittings and features an aseptic seal design. 【Features】 ■ Low shear characteristics ■ Reduced contamination risk due to self-contained magnetic bearings ■ A pump that does not generate particulates ■ Does not create excessive pressure situations compared to roller pumps ■ The gap between the impeller and casing is not narrow enough to trap bacteria *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "LCO-i100" is a system that integrates and manages the Levtronics Maglev pump and ultrasonic flow sensor, featuring an extremely sophisticated user interface and the latest external connectivity options. The system operates as a standalone pump, enabling flow monitoring and control, as well as pressure monitoring with up to two connected pressure sensors, and temperature monitoring, achieving various operating modes. The housing is designed to be IP65 dustproof and waterproof, capable of withstanding strong jets of water from all directions. Protective caps with an IP66 rating or higher are provided for unused connection ports. 【Features】 ■ High-precision flow monitoring and control ■ Built-in signal converter for easy connection of pressure and temperature sensors ■ Maximum pressure limit function to avoid the risk of tube rupture ■ Plug-and-play standalone operation ■ Intuitive user interface via a 7" color multi-touch screen *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• others

The "LCO-600 (600 W)" is a pump console that enables various operating modes, including standalone pump operation, flow monitoring and control, pressure monitoring with up to two connected pressure sensors, and temperature monitoring. The housing is designed to be IP66 dustproof and waterproof, capable of withstanding powerful jets of water from all directions. Protective caps exceeding IP66 specifications are provided for unused connection ports. The console can be placed horizontally on a table or installed vertically on a wall, and the panel display direction can be changed via software to match this setup. 【Features】 ■ High-precision flow monitoring and control ■ Built-in signal converter for easy connection of pressure and temperature sensors ■ Maximum pressure limit function to avoid the risk of tube rupture ■ Plug & play standalone operation ■ Intuitive user interface with a 7" color multi-touch screen *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• others

The "PuraLev i100SU (Single Use)" is a groundbreaking pump series that does not have bearings that may wear out and does not use shaft seals that could leak. Based on the principle of magnetic levitation, the pump's impeller floats non-contact within a sealed casing and is driven by the rotating magnetic field of the motor. By adopting magnetic bearings instead of mechanical ones and designing an independent pump head, the risk of contamination is significantly reduced. Additionally, the space between the impeller and casing is not narrow, and due to the low shear pump design, it can gently transfer delicate liquids. 【Features】 ■ Low shear characteristics ■ Reduced contamination risk due to self-contained magnetic bearings ■ Pump that does not generate particulates ■ Does not create excessive pressure situations compared to roller pumps ■ The non-narrow gap between the impeller and casing does not trap bacteria *For more details, please request materials or view the PDF data from the download.

• Other pumps

The "PuraLev i30SU (single-use)" is a groundbreaking pump series that does not have bearings that may wear out and does not use shaft seals that could leak. Based on the principle of magnetic levitation, the pump impeller floats non-contact within a sealed casing and is driven by the rotating magnetic field of the motor. The pump housing allows for the easy attachment and detachment of an intuitive and user-friendly bayonet-type pump head. The controller and motor are integrated into the driver's housing, eliminating concerns about cable connections. 【Features】 ■ Low shear characteristics ■ Reduced contamination risk due to self-contained magnetic bearings ■ Pump that does not generate particulates ■ Does not create excessive pressure situations compared to roller pumps ■ The wide gap between the impeller and casing does not trap bacteria *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "Clamp-On D Series for Flexible Tubes" is a flow meter designed to measure the flow of high-purity fluids flowing through flexible tubes without causing any intrusion. It is equipped with two piezoelectric transducers facing each other in the sensor housing, each responsible for receiving and transmitting ultrasonic signals. This product consists of a flow sensor and a converter equipped with a digital signal processor (DSP) that processes the sensor signals. 【Features】 ■ Non-invasive flow measurement that prevents contamination ■ No moving parts → No generation of particulates ■ Uses reusable sensors, resulting in low disposal costs (only tubing costs) ■ Enhanced robustness against bubbles due to DSP processing technology ■ Flow control in conjunction with Levtronics magnetic levitation pumps *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

The "LFS-SU Single Use Flow Meter" is a flow meter that can measure high-purity fluids flowing through soft tubes without invasive interference. Two piezoelectric transducers facing each other are installed in the sensor housing, with each performing the reception and transmission of ultrasonic signals. The measurement values from the flow sensor are displayed on a 4-digit display. It is possible to perform tasks such as debugging, data collection, and configuration using a PC. 【Features】 ■ High precision (1%) flow measurement ■ Non-invasive flow measurement that does not cause contamination ■ No moving parts → No generation of particles ■ Enhanced robustness against bubbles through DSP processing technology ■ Flow control in conjunction with Levtronics magnetic levitation pumps *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

The motor-controller integrated BPS-i30 pump system is an innovative centrifugal pump that does not use consumable bearings or seals. Based on the principle of magnetic levitation, the pump's impeller floats non-contact within a sealed pump casing and is driven by the rotating magnetic field of the motor. Both the impeller and the pump casing are made of high-purity fluororesin with excellent chemical resistance. These components, along with the rotor magnets, make up the pump head. Unlike conventional BPS systems, the controller and motor are integrated as a driver housing, freeing users from the hassle of cable wiring and space issues. The impeller's rotation speed is precisely controlled by electronic circuits, resulting in no pulsation. With a pulsation-free valve-less structure, inline boosting is possible. The control system features a PI function, allowing for easier construction of closed-loop flow or pressure control using various sensors.

• Other pumps
• Resist Device
• Plating Equipment

The motor-controller integrated BPS-i100 pump system is an innovative centrifugal pump that does not use consumable bearings or seals. Based on the principle of magnetic levitation, the pump's impeller floats non-contact within a sealed pump casing and is driven by the rotating magnetic field of the motor. Both the impeller and the pump casing are made of high-purity fluororesin with excellent chemical resistance. These components, along with the rotor magnets, form the pump head. Unlike conventional BPS systems, the controller and motor are integrated as a driver housing, freeing users from the hassle of cable wiring and space issues. The impeller's rotational speed is precisely controlled by electronic circuits, eliminating pulsation. With a pulsation-free, valveless structure, inline boosting is possible. The control system features PI functionality, allowing for easier construction of closed-loop flow or pressure control using various sensors.

• Other pumps
• Other semiconductor manufacturing equipment
• Mixer/agitator

The BPS-200 pump system is an innovative centrifugal pump that does not use consumable bearings or seals. Based on the principle of magnetic levitation, the pump's impeller floats non-contact within a sealed pump casing and is driven by the rotating magnetic field of the motor. Both the impeller and the pump casing are made of high-purity fluororesin with excellent chemical resistance. These components, along with the rotor magnets, make up the pump head. The rotor speed is electronically controlled, allowing for precise control of fluid pressure and flow rate without pulsation. This pump has two basic system types. The standalone type includes a control panel that allows manual speed setting on the controller, eliminating the need for a PLC to set the speed via an analog signal. The expanded type has a built-in PLC interface, enabling speed setting via external signals or precise flow or pressure control using flow or pressure sensors. For more details, please contact us.

• Other pumps

The BPS-600 pump system is an innovative centrifugal pump that does not use consumable bearings or seals. Based on the principle of magnetic levitation, the pump impeller floats non-contact within a sealed pump casing and is driven by the rotating magnetic field of the motor. Both the impeller and the pump casing are made of high-purity fluororesin with excellent chemical resistance. These components, along with the rotor magnets, make up the pump head. The rotor speed is electronically controlled, allowing for precise control of fluid pressure and flow rate without pulsation. This pump has two basic system types. The standalone type includes an operation panel that allows manual speed setting on the controller, eliminating the need for a PLC to set speed via an analog signal. The expanded type has a built-in PLC interface, allowing speed to be set via external signals, or enabling precise flow or pressure control using flow or pressure sensors. For more details, please contact us.

• Special Pump
• Turbo Pump
• CMP Equipment

The BPS-2000 pump system is an innovative centrifugal pump that does not use consumable bearings or seals. Based on the principle of magnetic levitation, the pump impeller floats non-contact within a sealed pump casing and is driven by the rotating magnetic field of the motor. Both the impeller and the pump casing are made of high-purity fluororesin with excellent chemical resistance. These, along with the rotor magnets, constitute the pump head. The rotor speed is electronically controlled, allowing for precise control of fluid pressure and flow rate without pulsation. This pump has two types of basic systems. The standalone type includes an operation panel for manually setting the speed on the controller, allowing for the omission of a PLC that sets the speed via an analog signal. The expanded type has a built-in PLC interface, enabling speed to be set by external signals, or allowing for precise flow or pressure control using flow or pressure sensors. For more details, please contact us.

• Other pumps
• CMP Equipment
• Wafer processing/polishing equipment

The BPS-4H pump system is an innovative centrifugal pump that does not use consumable bearings or seals. Based on the principle of magnetic levitation, the pump's impeller floats non-contact within a sealed pump casing and is driven by the rotating magnetic field of the motor. Both the impeller and the pump casing are made of high-purity fluororesin with excellent chemical resistance. These components, along with the rotor magnets, make up the pump head. The rotor speed is electronically controlled, allowing for precise control of fluid pressure and flow rate, with no pulsation. This pump has two types of basic systems. The standalone type includes a control panel for manually setting the speed on the controller, allowing for the omission of a PLC that sets the speed via an analog signal. The expanded type has a built-in PLC interface, enabling speed to be set by external signals, or allowing for precise flow or pressure control using flow or pressure sensors. For more details, please contact us.

• Other pumps
• Other semiconductor manufacturing equipment
• Pure water production equipment

The BPS-4000 pump system is an innovative centrifugal pump that does not use consumable bearings or seals. Based on the principle of magnetic levitation, the pump's impeller floats non-contact within a sealed pump casing and is driven by the rotating magnetic field of the motor. Both the impeller and the pump casing are made of high-purity fluororesin with excellent chemical resistance. These, along with the rotor magnets, constitute the pump head. The rotor speed is electronically controlled, allowing for precise control of fluid pressure and flow rate without pulsation. This pump has two types of basic systems. The standalone type includes a control panel that allows manual speed setting on the controller, eliminating the need for a PLC to set the speed via an analog signal. The expanded type has a built-in PLC interface, allowing speed to be set by external signals, or enabling precise flow or pressure control using flow or pressure sensors. For more details, please contact us.

• Wafer processing/polishing equipment
• Special Pump

The LEVIBOOST series is a standalone booster unit designed for high-purity chemicals and ultra-pure water. It can be installed in the line without modifying existing systems. Additionally, it utilizes Levtronics' magnetic levitation bearing-less pump and high-precision pressure sensors to enable feedback-controlled constant pressure of the fluid. There are two types available: one with a maximum of 75L at 600W and another with a maximum of 140L at 1500W, capable of boosting pressure from 0.1 to 0.4 MPa depending on the type, accommodating both low and high flow rates. For more details, please contact us.

• Other pumps
• Mixer/agitator

The PTM pump mixer is an innovative system that performs mixing (stirring) inside a tank provided by the customer and transfers the contents to another location using a single component. The stirring utilizes the discharge jet of the pump. The pump is based on our magnetic levitation bearingless pump system, which has no bearings that could wear out and does not use shaft seals that could lead to liquid leakage, making it a groundbreaking non-contact pump and mixer. Based on the principle of magnetic levitation, the pump impeller floats non-contact within a sealed casing and is driven by the rotating magnetic field of the motor. Both the impeller and the casing are made of high-purity fluororesin with high chemical resistance. These, along with the rotor magnets, constitute the pump head.

• Other pumps
• Mixer/agitator

The LEVIFLOW?LFS flow meter series is designed for high-precision flow measurement with minimal contamination and impact on fluids, suitable for high-purity chemicals and ultra-pure water. In particular, it achieves simple fluid control when combined with Levtronics' magnetic levitation bearing-less pumps. There are models with six flow ranges, two of which are also suitable for high-temperature applications.

• Flow Meter