ルータ List of Products and Services

Materials handled: Engineering plastics PA6, PA66, POM, PC, PPE, U-PE, etc. Super engineering plastics PEEK, PPS, PEI, PI, PSU, PTFE, etc. General-purpose plastics HDPE/PE, PP, PS, ABS, PVC, PMMA, PET, etc. Thermosetting resins PU, EP, SI, PUR, etc.

• Engineering Plastics
• plastic
• Other pumps

Molybdenum (Mo) and tungsten (W) are metals with high density, high melting points, and low thermal expansion coefficients. By adjusting the ratio of MoCu and WCu alloys, optimal materials with suitable thermal expansion coefficients are created, which are applied as heat sinks for semiconductor LED chips. The radiation shielding properties of Mo and W are also commonly used in medical device components.

• Chip type LED
• Wafer
• diode

Precision machining of high melting point rare metals and their alloy materials: Mo, MoCu, W, WCu. High melting point rare metals possess unique properties such as high melting point, high density, high corrosion resistance, wear resistance, sufficient electrical resistance, low thermal expansion rate, good thermal conductivity, and high radiation absorption capacity, making them applicable in a wide range of fields including medical, electronics, and semiconductors.

• Chip type LED
• Wafer
• diode

Molybdenum (Mo) and tungsten (W) are metals with high density, high melting points, and low thermal expansion coefficients. By adjusting the ratios of MoCu and WCu alloys, optimal thermal expansion coefficient materials are created, which are used as heat sinks for semiconductor LED chips. The radiation shielding properties of Mo and W are also commonly utilized in medical device components.

• Chip type LED
• Wafer
• diode

We handle fused quartz, synthetic quartz, high purity, and high transmittance materials. We will challenge at a low cost.

• Glass

Quartz glass optical substrate Wafer: Maximum 6 Inch diameter 300mm, thickness: 0.5mm and above Square: Within 300*300mm, thickness: 0.5mm and above Flatness: 0.01mm We will challenge at a low cost.

• Glass

We can accommodate flat quartz windows and curved glass lenses of various shapes. We will challenge ourselves to offer them at a low cost.

• Glass

Precision processing of quartz glass Transmittance: 99% or higher Flatness: ±0.002mm We will challenge at a low cost.

• Glass

High purity, High transmittance: over 90% Flatness: up to ±0.002mm We will challenge at a low cost.

• Glass

We will process high-temperature resistant quartz boards and quartz cassettes for 2, 4, 6, and 8-inch wafers of each size. We will challenge at a low cost.

• Glass

Quadrilateral: Within 700*700mm, Thickness: 2~10mm Rectangle: Within 300mm*2000mm, Thickness: 2~15mm Circle: Maximum diameter 500mm, Thickness: 4mm~ We will challenge at a low cost.

• Glass

We will challenge the production of optical components such as lenses and prisms, as well as photomasks for semiconductor manufacturing and masks for liquid crystal panel production, at low cost.

• Glass

We supply ultra-large diameter quartz pipes with a diameter of 2mm to a maximum of 450mm. We will challenge at a low cost.

• Glass

We will supply ultra-large diameter quartz core tubes with a maximum diameter of 450 mm and a maximum length of 3000 mm. We will challenge at a low cost.

• Glass

● Alumina (Al2O3) substrate Thickness: 0.38mm and above Metallization: MoMn, W, Ni, Ag, Au ● AlN substrate Thermal conductivity 170W/m·k and above Thickness: 0.38mm and above Metallization: Cu, Ti/W, Pt, Ag, Au We will challenge at a low cost.

• Fine Ceramics

Precision processing of alumina (Al2O3), zirconia (ZrO2), silicon carbide (SiC), silicon nitride (Si3N4), and various ceramic materials. We will challenge at low cost.

• Fine Ceramics

We use high-purity alumina (Al2O3) materials with excellent heat resistance, abrasion resistance, and insulation properties (up to 96%, 99%, 99.5%, and 99.8%). We will challenge at a low cost.

• Fine Ceramics

We use high-purity alumina (up to 96%, 99%, 99.5%, and 99.8%) as the material and perform high-precision processing. We will challenge at a low cost.

• Fine Ceramics

Please leave the processing of ceramic parts that require strength, such as axes, pins, and bottles, to us. We will take on the challenge at a low cost.

• Fine Ceramics