クレアクト List of Products and Services

The "NEON" from the German company Pupil Labs is a mega-type eye tracker that requires no calibration. When combined with a dedicated smartphone, it can measure gaze from the moment the glasses are worn. It allows for stable gaze measurement regardless of visual stimuli or measurement location, and is not affected by weather conditions, even in direct sunlight. All the necessary eye tracking hardware, including a high-speed eye camera, wide-angle scene camera, stereo microphone, and IMU, is housed in a small package called the "Neon Module," which is wrapped in waterproof silicone.

• others

The "Misty2 Robot," built with the latest technology, is the most charming social robot in the world. Using Misty’s eyes, sound, and movement, you can create a friendly character and interactions. Be sure to try out the Misty2 Robot, which changes its expressions vividly.

• Other industrial robots

The Tactilus insole sensor is the smallest and lightest insole sensor in this field, featuring a high-performance sensor that is strong against shear and has excellent durability. Based on decades of research in plantar pressure analysis and sensor design, it is resistant to electromagnetic noise and changes in temperature and humidity, allowing for measurements in various scenarios. The measurement device (smartphone or tablet) can be moved up to approximately 10 meters, and the collected data is displayed as 2D and 3D heat maps. Threshold processing allows for the narrowing down of specific areas and high-pressure or low-pressure zones.

• Pressure

The sensors can be placed inside the gloves, made of fabric, to fit snugly on the hands. Each glove is connected to a controller that communicates via Bluetooth with mobile devices (smartphones and tablets). As a result, data acquisition is synchronized between the gloves, allowing for direct data collection during dynamic measurement experiments. The collected data can be imported to a PC and analyzed using the dedicated TS (Tactilus Scientific) 10 software. The control unit connects to the sensors via a connector and accommodates different sensor sizes. Typically, the sensor sizes are S, M, and L.

• Pressure

The package designed for use at the work site differs from those intended for other scientific investigations by employing a tablet PC for device control. The dedicated application features an interactive device setup that allows for intuitive use. Once data measurement is conducted, a statistical and visually comprehensible report can be generated with just a few taps. It is also easy to attach to the worker; without the need for a specialized suit, a motion sensor the size of a matchbox can be securely and comfortably fixed using a dedicated strap. For those whose work primarily involves stationary tasks, a version with 9 sensors for the upper body is used, while a full-body version with 15 sensors is employed for tasks involving movement or lifting from ground level. Once accustomed to the setup, the full-body version can be prepared in about five minutes, allowing for immediate assessment of the worker and the work environment. By comparing data from individual workers, it is possible to identify differences and risks between experienced and novice workers, and by statistically analyzing data from multiple workers in the same workplace, the risks associated with that workplace can be assessed.

• Analytical Equipment and Devices

■What is CardioWheel? CardioWheel performs biometric authentication required for Advanced Driver Assistance Systems (ADAS) from ECG signals, detecting and measuring fatigue and drowsiness. By monitoring ECG, it quickly detects abnormalities in the driver, serving as a system to assist in driver management and safe driving. It is an advanced driver monitoring system that issues alerts every time drowsiness is detected based on the Karolinska Sleepiness Scale (KSS). ■What is CardioVest? CardioVest is a system that allows ECG (electrocardiogram) measurement simply by wearing a smart shirt (with built-in sensors that are washable) in combination with a dedicated device. By measuring ECG in daily life without any sense of discomfort, it can be used for health monitoring, such as confirming the well-being of employees during work hours or detecting abnormalities in heart signals, like heart failure.

• Other measurement, recording and measuring instruments

The wearable motion analysis system "Physilog Census" provides data that can be used not only for assessing fall risk and screening frail elderly individuals but also for research and clinical applications related to conditions such as stroke. Additionally, being wearable allows for measurements to be taken without restricting the subject's movements. It offers seven standardized tests, including the 10-meter walk test and the Timed Up and Go (TUG) test, with immediate report display on a tablet device, as well as the option to obtain more detailed reports through post-processing. *There are 39 parameters available. - In gait analysis, parameters such as stance phase and toe-heel clearance are output. - In running analysis, parameters such as stance time and heel contact angle are output. - Automatic calibration. - Output of all data per step is possible (.xls). - Access to raw data (3-axis accelerometer, 3-axis gyro, barometric pressure). - PDF reports including visualization with color coding, compatible with online/offline analysis software (offline version scheduled for release in 2024). - Compatible with macOS/Windows. - Over 500 scientific references available.

• Other measurement, recording and measuring instruments

The "Furhat Robot," which is ideal for those who want to incorporate an interactive social interface into their development and research, allows you to set facial expressions, eye movements, head movements, voice, and emotions, all of which are realized on the Furhat Robot through its unique rear projection mapping, resulting in a highly expressive face. It also comes with a cutting-edge platform that makes programming conversations easy. The Furhat Robot is equipped with an advanced motion platform that enables natural head movements similar to those of humans. It also includes sensors that detect sound and vision, along with sufficient processing power, memory, and storage capacity. Standardized I/O ports allow for the expansion of the robotic system and integration into a wider range of systems.

• others

This is a multi-channel EEG measurement suitable for research in cognitive science, psychology, and human-computer interaction (HCI). By attaching a removable 32-channel gel-free Ag/AgCl sensor, it transmits raw data in real-time. This innovative design allows for stable measurements over extended periods, from children to the elderly. The free data acquisition software "Cygnus" is included in the package.

• Other measurement, recording and measuring instruments

St.EE Gemini is an 8-channel wearable electroencephalogram (EEG) system equipped with saline-soaked sponge sensors, miniature amplifiers, and wireless telemetry. The provided 19-channel electrode cap is arranged according to the international 10-20 system. The innovative electrode holder design allows users to select up to 8 target channels according to their needs. Additionally, an optional 8-differential channel cable for acquiring ECG (electrocardiogram) / EMG (electromyogram) can be provided. For 8-channel EEG measurement, options include Satellite, hyperscanning, or simultaneous acquisition of EEG and biological signals with Gemini (a set of 2 Satellites + RJ45 interface).

• Other measurement, recording and measuring instruments

For those who feel that "I want to measure brain waves simply and quickly, but finding the right electrode placement is difficult," we recommend the Altaire wearable EEG device based on the 10-20 system. It is a dry-type device that requires no preparation; simply wear the headset and turn it on to start measuring. The sampling rate is 1 kHz, and the resolution is 24 bits. One of its features is the ability to measure brain waves across a wide range from DC to 262 Hz. With a full charge, it can be used for up to 10 hours. Using the included software Cygnus, you can check band power, spectrum, spectrogram, topography, and more in real-time. Additionally, it supports event-related potentials (ERP) and can record precise synchronization signals for analysis in Python, Matlab, and other platforms.

• Other measurement, recording and measuring instruments

The new 3DM-GQ7 GNSS/INS is an all-in-one navigation solution with centimeter-level positioning accuracy. It is equipped with various correction sensors for harsh environments and situations, and it demonstrates stable and excellent performance through a newly developed dual antenna and the latest RTK-compatible INS, based on years of experience and proprietary algorithms. It features a dual multi-band GNSS receiver, low noise and low drift MEMS inertial sensors, and a robust adaptive Kalman filter, delivering performance that sets it apart from others in its class.

• Other Auto Parts

The "e-skin MEVA" is the world's simplest motion capture system that requires no camera and can start measuring just 30 seconds after being worn. No specialized knowledge is needed, and it converts motion into 3D animation while monitoring joint angles in real time. Additionally, because it uses the smart apparel "e-skin" developed by Xenoma, it does not hinder the subject's movements and captures natural motion. It is a high-performance motion capture system that can be used in a wide range of fields, including rehabilitation, biomechanics, gerontology, sports, and gait pathology.

• Other measurement, recording and measuring instruments

The motion capture system Simi Motion and its software add-on module Simi Shape 3D enable full-body 3D motion capture and analysis without the use of markers! By combining AI-driven motion capture with over 30 years of experience and algorithms in computer vision-based motion analysis, it achieves the highest accuracy in the world. 【Features】 ■ Markerless measurement ■ Zero installation time loss ■ Natural measurement without awareness ■ Customizable for research and investigation purposes *For more details, please refer to the PDF document or feel free to contact us.

• Analytical Equipment and Devices

The "Facekit Module" is an add-on software that adds head tracking and eyelid tracking to the FX3 eye tracker. It measures the gaze data along with the orientation of the subject's face, the angle of the head, and the degree of eyelid opening. It works perfectly fine even if the subject is wearing glasses or sunglasses. Moreover, no special calibration for Facekit is required. 【Features】 ■ Non-contact measurement of the subject's head position and angle with 6 degrees of freedom ■ Measurement of the subject's eyelid opening from 0 to 100% ■ No calibration required ■ Fast recovery from loss *For more details, please refer to the PDF document or feel free to contact us.

• Other operation management software

This is a biosignal measurement system designed for researchers and engineers working in universities and companies. You can freely combine a variety of biosensors, such as electroencephalography (EEG), electrocardiography (ECG), surface electromyography (EMG), and blood volume pulse (BVP/optional). It can be used in any field, including research in affective engineering, driver state detection, and behavior analysis. Additionally, it is priced competitively compared to other products on the market. It is also possible to develop your own applications using various APIs.

• others

All inertial measurement unit (IMU) models have the capability to directly measure acceleration, angular velocity, delta theta, and delta velocity. The 3DM-CX5 is a board-mounted type that conforms to GXS specifications. The 3DM-CV5 has optional features such as automatic magnetic anomaly correction, gyro, and acceleration noise effect correction. In the output model of calculated data, high-precision calculated data can be output even in dynamic operating conditions using an automatically adaptive estimation filter algorithm. Depending on the model, it calculates and outputs values for roll, pitch, and yaw.

• Other measurement, recording and measuring instruments

The non-contact FX3 is a high-performance eye tracker capable of acquiring data on binocular fixation points, eye movements, and head position in space in environments such as cars, simulators, and cockpits. It features a USB3 plug-and-play connection for easy measurement initiation. With a wide tracking area and strong resistance to ambient light, the FX3 can be used for measurements in any location. Please use it according to your research and development needs, such as monitoring driver attention, research and development, gaze scan patterns for in-vehicle devices, and fixation on objects. 【Resistant to ambient light, so it can be used in any measurement location】 The FX3 has a cylindrical shape with a diameter of 4 cm and a length of 17 cm. Data exchange with a PC is conducted via a USB3 cable. Additionally, its unique algorithm provides excellent robustness to lighting conditions, allowing for stable data measurement even in complex lighting environments, such as the driver's seat of a car. The "Facekit module" that can be used with the FX3 allows for head tracking and eyelid tracking measurements. *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments

The TEA Corporation's outdoor motion and biometric data measurement system "Motion-Captiv" is capable of measuring full-body motion outdoors. Additionally, it can measure physiological data such as heart rate, respiration, body temperature, skin conductance, and electromyography, along with gaze data and EEG data, allowing for simultaneous analysis with video images. This system is ideal for sports, driver behavior analysis, rehabilitation engineering, and ergonomics. 【Features】 [CAPTIV-L7000] ○ Motion function behavior analysis system ○ Various sensors can acquire data wirelessly ○ Compact, lightweight, and provides a natural wearing experience ○ Synchronization with various eye-tracking systems is possible ○ All acquired data is integrated and can be analyzed together For more details, please contact us or download the catalog.

• Other measurement, recording and measuring instruments

The portable EEG measurement device "B-Alert X Series" manufactured by ABM (USA) achieves a weight of just 110 grams, making it so light that you can forget you are wearing it. It allows for comfortable measurements even during long periods of use. By adopting wet electrodes that use conductive cream, it enables stable data measurement with minimal noise even when subjected to vibrations. The hardware headsets X10 and X24 come with Basic software for raw data acquisition and an SDK (Software Development Kit). We also provide synchronization devices. Data can be obtained for monitoring driving fatigue and drowsiness, event-related potentials, cognitive load analysis, and single-trial ERP analysis. For more details, please contact us or download the catalog.

• Other measurement, recording and measuring instruments