メディアロジック List of Products and Services

The DTW2U3-EPR is a tool designed to assist in the protocol analysis of the USB Type-C Power Delivery standard (supporting 5V-48V 240W). It connects between two USB Type-C devices to capture voltage and current information of the VBUS/CC/VCONN signals, as well as the Power Delivery messages transmitted between the USB Type-C devices. The captured data is sent to a host PC connected via a USB Micro-B port, where a dedicated application can graphically display the voltage and current of various signals and perform protocol analysis of the PD messages.

• Other measurement, recording and measuring instruments
• others

The "DTP1U0" is a device for evaluating power source products such as batteries and charging AC adapters that comply with the USB Power Delivery (USB PD) standard. It can send Request packets for the supported USB PD voltages (5, 9, 15, 20V), eliminating the need to prepare various devices that were previously necessary for evaluating each voltage. 【Features】 ■ Easy and efficient evaluation of power output and load for USB PD compliant devices ■ Supports evaluation of power supplies with multiple Source Capabilities ■ Operates on USB bus power, eliminating the need for an external power source ■ Allows for unique load testing by connecting an electronic load for current evaluation ■ Compact and lightweight *For more details, please refer to the PDF document. Feel free to contact us with any inquiries.

• Other measurement, recording and measuring instruments

The new USB standard "USB Power Delivery" (USB PD) supports high power charging and power supply up to 100W (20/5A). This time, we will introduce three key products that comply with the USB PD standard and the new connector USB Type-CTM. 【Product Lineup】 ◎ USB Hub 'PHUB1U3' (Reference Exhibit) 　■ High output power supply (up to 60W per port) and power optimization to reduce AC adapters 　■ Port indicators visualize the automatic power supply status ◎ Hard Disk Case 'PHDC1U3' (Reference Exhibit) 　■ Supports USB bus-powered operation for 3.5-inch HDDs 　■ Power supply from the 3.5-inch HDD ◎ USB Analyzer 'DTW2U3' 　■ Assists in protocol analysis of USB-PD standard Rev3.0 　■ Acquired data can be displayed in graphs for various voltages, currents, and power using dedicated software, and protocol analysis of PD messages is possible *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Logic Analyzer
• Routers, Switches, and Hubs
• Other electronic parts

Achieve operation as an alternative to floppy disk drives! Compatible with PC-98 and DOS/V! A must-see for those struggling with reading floppy disks on older machinery. The "Silicon FDD (Floppy Disk Drive)" is a media conversion adapter that allows the use of SD cards or USB memory instead of floppy disks as media. It is compatible with the 3.5-inch FDD form factor, allowing it to be installed in existing FDD bays. You can build a long-lasting and environmentally resistant FDD system. 【Examples of Use】 ■ Semiconductor manufacturing equipment ■ NC machine tools ■ Machine tools ■ Measuring instruments ■ Pipe benders ■ Surface mount machines (mounting machines) *For more details, please request materials or view the PDF data from the download.

• Storage

Achieve operation as an alternative to the now hard-to-obtain floppy disk drives! Have you ever experienced operational failures due to floppy disks in old machine tools or PCs? The "FD Conversion Adapter" is a retrofitting product that allows you to easily replace floppy disks with USB memory or SD cards. We offer compatible products for 3.5-inch FDD shapes supporting 1.44/1.2MB, as well as slim types and special models. For more details, please refer to the documentation and feel free to contact us. You can replace floppy disks with SD cards or USB memory, allowing you to build an FDD system that is long-lasting and highly resistant to environmental factors. ◆ It is possible to replace hard-to-obtain floppy disks with silicon FDDs! ◆ First, we will ask about your specifications and lend you a sample for evaluation that can be replaced, so please feel free to contact us. 【Examples of Use Cases】 PC98 Series FC98 Series PC-AT Compatible Machines Machine Tools Semiconductor Manufacturing Equipment Printing Machines Industrial Sewing Machines Measuring Instruments Musical Instruments, etc.

• Storage

The "MLUSB Mount" is a file manager app (filer) born in Japan that allows for file operations and organization on smartphones and tablets. Easily utilize USB memory and hard disks just like on a PC! Nexus users who have been struggling with the inability to use SD cards and USB devices can now organize their files freely. Additionally, files from PCs that could not be read before can now be easily handled. 【Features】 ■ Unique technology by Media Logic ■ Access USB devices on the Nexus series where file extraction is not possible ■ Rich file system support ■ Smooth and intuitive operation ■ Easy-to-understand file operations with dual screen display *For more details, please refer to the PDF. For inquiries regarding development outsourcing requests, please contact us.

• others
• Embedded applications for mobile phones and PDAs

Media Logic Co., Ltd. offers pre-compliance test services for USB 3.0 and SATA 6Gbps. We conduct channel measurements for your USB/SATA devices and provide reports, as well as technical support including improvement suggestions. 【Test Overview】 ■ USB 3.0 Pre-Compliance Test - SuperSpeed USB compliance testing in accordance with USB-IF Electric Test Specification Rev 0.9 ■ SATA 6Gbps Pre-Compliance Test - Compliance testing for PHY, TSG, OOB, and RSG as specified in the Serial ATA Unified Test Document Ver 1.4 *For more details, please refer to our catalog or contact us via email or fax.

• Contract measurement
• others

The "DTE1U2" is a device that is inserted between a USB 2.0 host and device, intentionally generating CRC errors by varying the impedance of the transmission line. It allows you to observe the behavior of the host or the device when a CRC error occurs. We have sample boards available, so please feel free to contact us if you are interested. 【Features】 ■ Intentionally generates CRC errors ■ Allows for the observation of the host's behavior and the device's behavior when a CRC error occurs *For more details, please refer to the catalog or feel free to contact us.

• Semiconductors and ICs
• Other electronic components and modules

The "DTC1U3" is a device installed between USB 2.0/3.0 host and device that electrically emulates the connection and disconnection of USB cables. It allows independent control of the connection and disconnection timing for both VBUS and USB signals, quantifying the USB device insertion and removal tests that were previously done manually over a time axis. Additionally, with timing settings from a configuration computer, it enables tests for fast and slow insertions and removals that cannot be performed manually. 【Features】 ■ Enables high-speed and low-speed insertion and removal tests that cannot be done manually ■ Allows for the extraction of issues and reproduction of faults during cable insertion and removal *For more details, please refer to the catalog or feel free to contact us.

• Other analytical and testing equipment

The "DTW1U3" (product name "USB Watt Monitor") is a monitoring device that measures the current consumption and VBUS voltage of USB bus-powered devices. It allows for easy measurement of the current consumption and operating VBUS voltage of devices connected via USB 3.0/2.0. The product's LCD displays the current measurement values, VBUS voltage, and peak measurement results. 【Features】 ■ Measures the current consumption and VBUS voltage of USB bus-powered devices ■ Easy to measure *For more details, please refer to the catalog or feel free to contact us.

• Other measurement and measuring equipment

The "MLDU03" is a bridge SLI that converts SATA 6Gbps output to a USB 3.0 device. In addition to supporting SATA HDD/SSD, it also supports optical devices such as DVDs and Blu-ray Discs through ATAPI protocol. It features unique smart mount and smart security functions, and now supports the next-generation content protection standard, SeeQVault. Additionally, firmware customization to meet customer specifications is also possible. 【Features】 ■ Host Interface: USB 3.0 (5Gbps) ■ Device Interface: SATA 6Gbps Supports ATA/ATAPI devices and NCQ ■ Compliant with USB Mass Storage Class ■ Equipped with 10 GPIOs ■ Single +5V power supply *For more details, please refer to the catalog or feel free to contact us.

• Semiconductors and ICs
• Other electronic components and modules

The "MLDU3L" is a bridge LSI that converts SATA 6Gbps devices to USB 3.0. This MLDU3L now supports the next-generation content protection standard SeeQVault, enabling high-speed access to hard disks. Additionally, the built-in voltage regulator allows for a compact board design by reducing the number of components. 【Features】 ■ Supports the next-generation content protection standard SeeQVault ■ Compatible with USB 3.0 (5Gbps) - SATA 6Gbps ■ Enables high-speed access to hard disks ■ Built-in voltage regulator ■ Allows for a compact board design *For more details, please refer to the catalog or feel free to contact us.

• Other electronic components and modules
• Semiconductors and ICs

The "DTC2U3" is a device installed between USB 2.0/USB 3.0 host and device that performs electrical emulation of USB cable connection and disconnection, as well as induces CRC errors. It enables the extraction and reproduction of issues during USB cable insertion and removal, or when a CRC error occurs, making it useful for improving the efficiency of USB device development and production processes. It is equipped with various operating modes that automatically execute different USB operations (connection, disconnection, error induction). 【Features】 ■ Enables extraction and reproduction of issues during USB cable insertion/removal or CRC error occurrence ■ Can be utilized for improving the efficiency of USB device development and production processes *For more details, please refer to the catalog or feel free to contact us.

• Electronic Components
• Other electronic components and modules
• Semiconductors and ICs

The "SQVA" is an adapter designed to convert storage devices that are not compatible with SeeQVault into storage devices that are compatible with SeeQVault. By using "SQVA-SATA" and "SQVA-USB," you can reduce the development time for your SeeQVault-compatible products. The LSI MLDU3L included in the SQVA is a USB-SATA conversion LSI compatible with SeeQVault, supporting USB 3.0 (5Gbps). 【Features】 ■ Simply attach it to a hard disk to immediately enable the development and evaluation of SeeQVault-compatible hard disks. ■ Compact design ■ Fully utilize the unique advantages of SeeQVault hard disks. *For more details, please refer to the catalog or feel free to contact us.

• Electronic Components
• Other electronic components and modules
• Semiconductors and ICs

The "Silicon FDD (Floppy Disk Drive)" is a media conversion adapter that allows the use of SD Cards or USB memory instead of floppy disks (FD) as media. It is compatible with the 3.5-inch FDD form factor, allowing it to be installed in existing FDD bays. You can replace floppy disks with SD Cards or USB memory, creating an FDD system that is long-lasting and highly resistant to environmental factors. Additionally, it can replace floppy disks that have become difficult to obtain in recent years. 【Features】 ■ Allows the use of alternative media (SD Card, USB memory) instead of physical floppy disks ■ The product dimensions are compatible with 3.5-inch FDDs, allowing for direct replacement ■ Enables smooth data exchange with a PC when connected ■ Can be used as a substitute device for existing systems that utilize FDDs *For more details, please refer to the catalog or feel free to contact us.

• Other electronic components and modules
• Semiconductors and ICs

SQVA is an adapter that converts storage devices not compatible with SeeQVault into storage devices compatible with SeeQVault. By using "SQVA-SATA" and "SQVA-USB," you can reduce the development workload for your SeeQVault-compatible products. The LSI MLDU3L equipped in SQVA is the industry's first USB-SATA conversion LSI compatible with USB 3.0 (5Gbps) for SeeQVault.

• Evaluation Board

MLDU3L is a bridge LSI that converts SATA 6Gbps devices to USB 3.0. This MLDU3L now supports the next-generation content protection standard SeeQVault. 【Applications】 SATA 6Gbps devices USB 3.0 devices Bridge LSI Protocol conversion LSI Support for ATAPI protocol Customizable firmware SeeQVault UAS protocol BOT protocol SQVA (Content protection standard SeeQVault conversion adapter) Conversion to SeeQVault compatible SQVA-SATA SQVA-USB SeeQVault Reduction of development man-hours *For more details on MLDU3L, please refer to the PDF.

• Dedicated IC

MLDU3L is a bridge LSI that converts SATA 6Gbps devices to USB 3.0 devices. It supports not only SATA HDD/SSD but also optical devices such as DVDs and Blu-ray Discs through ATAPI protocol support. In addition to its unique smart mount and smart security features, it now supports the next-generation content protection standard SeeQVault. Furthermore, firmware customization is available to meet customer specifications.

• Dedicated IC

This external PC-controlled USB insertion and removal testing device (DTC2U3) is installed between USB 2.0/USB 3.0 host-device connections and is designed to electrically emulate the connection and disconnection of USB cables, as well as induce CRC errors. It enables the extraction and reproduction of issues that occur during USB cable insertion and removal, or when CRC errors arise, making it useful for improving the efficiency of USB device development and production processes. 【Applications】 External PC control function USB insertion and removal testing device CRC error generation USB cable insertion and removal emulation Induction of CRC errors Extraction of issues during CRC error occurrence Extraction of issues during USB cable insertion and removal Efficiency improvement in USB product development evaluation Efficiency improvement in USB product production processes *Instruction manual is available! Please check it out via the catalog download.

• Testing Equipment and Devices

At Media Logic Co., Ltd., we leverage our extensive design and development experience in computer peripherals, LSI, and embedded systems to undertake contract development tailored to customer specifications. We provide a comprehensive range of development and production solutions from product planning, circuit design, ASIC/FPGA design, prototype board creation, to mass production support, all in a one-stop service. We can also accept projects for design and prototyping only. We specialize in various device interfaces, storage systems such as HDD, USB, SATA, and 1394, as well as custom designs and specifications that are generally difficult to accommodate, so please feel free to consult with us. [Development Achievements] - Circuit design, prototype board creation, mass production support - ASIC/FPGA design - Product planning and development (product planning, development, mass production) *For more details, please refer to our catalog or contact us via email or fax.

• Circuit board design and manufacturing