マウンテック List of Products and Services

The large canned goods that went out to the bathhouse came back as beautiful tempura. Welcome back. The final touches are waiting from now on. *You can view the detailed content of the blog through the related links. For more information, please feel free to contact us.

• Control Panel

A groove 1 millimeter wide was carved into a 5t × 50 × 100 channel steel. It was processed using a long-length machining center. Such processing is also possible. *For more details, you can view the related links on the blog. Please feel free to contact us for more information.

• Control Panel

We received an inquiry from a customer who manufactures resin products. They requested a jig to remove burrs from their products, and since they needed it urgently, we designed and created it within two days. It seems that it will function as intended. *You can view the detailed content of the blog through the related link. For more information, please feel free to contact us.*

• Processing Jig

We received a lot of orders for frames this summer as well. We are making them steadily! Frames, Gadai, Base *You can view the detailed content of the blog through the related links. For more information, please feel free to contact us.*

• Control Panel

We accommodate both requests for finishing the frame, whether it is a painted finish or a hot-dip galvanized finish. For painting, we can provide simple brush painting with natural drying, as well as baked painting. *You can view the detailed content of the blog through the related links. For more information, please feel free to contact us.

• Control Panel

We are manufacturing free access racks for data centers. It seems that data centers are often installed in urban buildings that can receive high voltage power. Recently, we have been receiving many requests for racks for data centers. If you are having trouble with racks for data centers, please feel free to contact us. *You can view the detailed content of the blog through the related links. For more information, please feel free to contact us.

• Control Panel

Today, I am grinding the stripes of the patterned steel plate. The stripes on the patterned steel plate have a non-slip effect, but at the request of a customer, I am diligently grinding them down. In fact, I am only grinding the part where the feet of the transformer will make contact. However, this task is extremely challenging. *For more details, you can view the related links. Please feel free to contact us for more information.

• Control Panel

Today, Mount Tech is having a platform festival! We have received many large platform production requests. Moreover, we are offering express service. Ten platforms of this size! Thank you for your wonderful order to complete them in just three days. *You can view the detailed content of the blog through the related link. For more information, please feel free to contact us.

• Control Panel

I had a meeting at Nagoya Castle for a bit. Previously, I went to see the base of the Kinshachi replica that was made by Mountech at the souvenir shop Shachijojyo in Kinshachi Yokocho. The Mountech sticker was still properly attached. Thank you very much. *You can view the detailed content of the blog through the related links. For more information, please feel free to contact us.

• Terminal Blocks

To prevent rust, a hot-dip galvanized finish is used. Commonly referred to as "dobu-galvanizing." Some people call it "tempura," but there are hardly any such people. Occasionally, there might be one among the customers. However, the finish is beautifully galvanized. Only those in the industry might understand what makes it beautiful. What is beautiful about it? I think this galvanizing is beautiful. *For more details, you can view the related links on the blog. Please feel free to contact us for more information.*

• Control Panel

Today, I am steadily working on the framework. At one company, it's called a base. At another company, it's called a framework. At another company, it's called a stand. At yet another company, it's referred to as a "kadai." In English, it seems to be referred to as trestle, abutment, frame, stand, or channel base. *For more details, you can view the related links on the blog. Please feel free to contact us for more information.*

• Control Panel

We are currently producing many racks. The electrical box will be placed on top. *For more details, you can view the related links. Please feel free to contact us for more information.*

• Control Panel

Layout line We will weld the H-beam. We are drawing lines to specify its position. *For detailed content of the blog, you can view it through the related links. For more information, please feel free to contact us.

• Control Panel

The thickness of the board is 12mm. Even such a thick board can be bent. *You can view the detailed content of the blog through the related links. For more information, please feel free to contact us.*

• Control Panel

This blog introduces "a distorted frame with some parts floating." You can also view actual images through the related links. Please take a look. *For more detailed information about the blog, you can view it through the related links. Feel free to contact us for more details.

• Control Panel

Channel steel 7.5×80×200 We are manufacturing the framework for a new project that started this spring. Dreams are expanding. *You can view the detailed content of the blog through the related links. For more information, please feel free to contact us.

• Control Panel

This is a base frame with a hot-dip galvanized finish. Hot-dip galvanizing refers to the surface treatment applied to metal objects, such as shiny utility poles. There are various plating companies across the country, but the plating company in this neighborhood produces a very beautiful finish without any unevenness. While the precision of the canning process is important, there are also customers who require a clean plating. I'm glad to have a good plating company nearby. *For more details, you can view the related links. Please feel free to contact us for more information.

• Control Panel

A channel base frame with a simple design, measuring 200mm in height. The appearance of the weld beads and the minimal sanding finish means it has not been overly ground down, resulting in a very clean finish. This is what catches the eye of the general public. In fact, more than anything, it is the craftsmanship to correct the rough shape of the structural steel that ensures the area where the distribution board will be placed is made perfectly flat. *For more details, please refer to the related links on the blog. Feel free to contact us for more information.

• Control Panel

This is a stage manufactured for inspection purposes, installed around equipment in the manufacturing industry. It also comes with handrails. The area where workers stand is made of checker plate. *For more detailed information, you can view it through the related links. Please feel free to contact us for more details.

• Control Panel

We have created a inspection walkway. We are making a passage by attaching striped steel plates on the frame. There are also handrails. Since a metal fabrication shop that is making enclosures for distribution boards is involved, the walkway is a bit too precise, haha. *For more details, you can view the related links on the blog. Please feel free to contact us for more information.

• Control Panel

While we promote ourselves as a sheet metal shop, we have been specializing in the framework of shaped steel materials since our founding. In particular, we have mastered the production of frames using shaped steel materials such as equal angle steel and channel steel for distribution boards. In recent years, we have been focusing on "supports" that are required in various industries, leveraging our expertise. - For distribution boards and control panels - For solar power - For substation equipment - For free access floors in data centers - For air conditioning equipment - For robots - For piping - For wiring, etc. Supports, referred to as "kadai," are used in various situations. Previously, we only performed primary processing (cutting, drilling, notching) with ironworkers, but by incorporating machining centers capable of processing long-shaped steel materials, we can now perform various machining operations using end mills even without molds. As a result, we can process H-shaped steel, square pipes, round pipes, and everything can be handled in-house, leading to reduced lead times and satisfaction among many customers. Regarding the amount of welding associated with the framework of shaped steel materials and the technology for distortion removal, our company, which employs many skilled welders, is well-equipped to handle these needs.

• Control Panel

For many years, we have been manufacturing angle frames made of shaped steel and channel bases for distribution boards (such as cubicles). Regarding the quality of individual components, we ensure precision not only in outer diameter and hole dimensions but also in angles and diagonals. Moreover, when it comes to creating a row of panels (panels that are continuously connected), we consider where to focus to ensure that the overall length dimensions fit accurately. We also pay attention to the relationship between the main body and the base during production. 【Strengths】 ■ Capable of meeting urgent delivery deadlines ■ Own a long machining center, with primary processing handled in-house ■ Safe for heavy loads; welding is done robustly and extensively ■ Proximity to painting and plating factories *For more details, please download the PDF document or feel free to contact us.

• Control Panel

There is a large galvanizing contractor that can handle hot-dip galvanizing about 20 minutes away. They not only perform can manufacturing but also handle hot-dip galvanizing, and they are skilled in post-galvanizing processes such as re-drilling holes that have been filled with galvanizing, re-tapping, and re-filling drainage holes for the galvanizing. They purchase standard-length steel materials of 11 meters and carry out cutting. Drilling is done using ironworkers and long-length machining centers. With years of experience in manufacturing angle frame enclosures, they also produce channel bases, frames, and supports with high precision. Since the angles and edge lengths of structural steel materials vary by lot, you can trust our company, which has the know-how, to handle it with confidence.

• Cabinets and Boxes

We are very skilled in manufacturing frames using angles (shaped steel and L-shaped steel). For structures like the one in the photo, we have a track record of producing 200 units per month, including painting. Since our founding, we have excelled in angle frames for distribution boards. We actively utilize our accumulated skills to manufacture structures as well. We also offer surface treatment services: - Painting finish: There is a painting contractor within the same complex, so there are no transportation costs for horizontal transport. - Hot-dip galvanizing finish: There is a galvanizing contractor just 20 minutes from our company. Typically, we can accommodate galvanizing within three days.

• Cabinets and Boxes

The "Custom-Made Water Tank" can be used as a storage layer for water discharge at demolition sites, as well as a storage container for various items ranging from liquids like water to solids such as waste. We can accommodate various requests such as "I want it made to fit the width of a truck bed" or "I want it to be stronger than conventional models." Please feel free to consult with us first. 【Features】 ■ Usable as a storage container for various items ■ Custom-made production ■ Responding to various requests ■ Can also be used as a storage container for non-liquid items such as scrap and industrial waste (buckets, containers) *For more details, please feel free to contact us.

• tank

The "Custom-Made Rack" is a rack specifically designed for closets and storage rooms that can create shelves that fit perfectly. It is lightweight and durable, and it works well even in narrow spaces. Assembly is easy, so it solves problems like "the storage case and shelf sizes don't match." Made of stainless steel, it is designed to be easy to handle even for women, making it significantly lighter and portable compared to wire racks or shelves made of iron. 【Features】 ■ Solves troublesome gaps in storage rooms ■ Effectively accommodates complex shapes ■ Shelf spacing can be easily adjusted in 25mm increments ■ Made of stainless steel, rust-resistant, lightweight, and easy for women to handle ■ Disposal is also taken care of when no longer needed *For more details, please feel free to contact us.

• rack
• Storage

"Custom-made slopes" are handmade ramps that can accommodate complex shapes. They can be installed in places you may have given up on, and they are made of steel, making them very sturdy with excellent drainage. With easy installation by simply placing them, they solve various height difference issues. If you think, "There can't be a car ramp that fits this place," please feel free to consult with us. 【Features】 ■ Custom-made production ■ Installation possible in places you may have given up on ■ Made with galvanized steel plates to resist rust ■ Handmade by skilled sheet metal workers ■ Reliable quality backed by years of experience *For more details, please feel free to contact us.

• Other Auto Parts
• others

Our main production achievements include various types of distribution boards, control panels, operation panels, information display panels, monitoring panels, and desk-type operation panels, such as outdoor cubicles, indoor cubicles, and road centers. On our company website, we introduce some of the products we have manufactured in the past, including "distribution boards" and "desk-type operation panels" made for businesses, as well as "ramp slopes" and "water tanks" made for individuals. 【Production Achievements】 <For Businesses> ■ Distribution Boards ■ Desk-Type Operation Panels ■ Information Display Panels ■ Control Panels ■ Frames *For more details, please feel free to contact us.

• Processing Contract
• Other processing machines