丸八ポンプ製作所 List of Products and Services

The stainless steel spiral pump "MAP type" is a stainless steel spiral pump that accommodates a wide range of fluids such as slurry and viscous liquids by adopting a full-open impeller. It is effective in various applications including the transfer, injection, filtration, stirring, and pumping of low-boiling point liquids and special liquids. 【Features】 ■ Low NPSH-Re (compared to our company) ■ Capable of pumping viscous liquids up to 450 mPa·s ■ The adoption of a full-open impeller allows for the handling of solid materials. ■ The back pull-out design makes disassembly and assembly easy without removing the piping. ■ Various customizations are possible, including options with sleeves and shaft seals. *For more details, please request materials or view the PDF data from the download.

• Special Pump

We would like to introduce a case study of a special vehicle manufacturer that implemented the "Stainless Steel Self-Priming Centrifugal Pump MAPS Type" from Maruhachi Pump Manufacturing. Pumps for special watering vehicles require corrosion resistance to salt, vibration resistance during operation, space limitations for installation, and self-priming capabilities to reduce tank loading time. Additionally, with the snow season approaching, a short delivery time was necessary. In response, our company modified the stainless steel self-priming centrifugal pump MAPS Type, accommodating two drive methods: belt drive powered by an engine and hydraulic motor drive, tailored to the mounting vehicle. This significantly reduced the installation space compared to conventional direct motor connection systems. [Overview] ■ Background - Corrosion resistance, vibration resistance, space-saving, self-priming capability, short delivery time ■ Solution - Special modification of the stainless steel self-priming centrifugal pump MAPS Type *For more details, please refer to the PDF document or feel free to contact us.

• Special Pump
• Other pumps

This document provides a detailed introduction to the background and solutions of cases where our pumps have been implemented, as well as the effects after implementation. We are currently offering a free document that includes various case studies, such as a pharmaceutical manufacturing company that wanted to reduce high overhaul costs and labor expenses, and an instant noodle manufacturing factory that achieved cost reduction through the use of a non-water-injection centrifugal pump. Please feel free to download it. 【Case Summary (Excerpt)】 ■ Cost reduction through optimal pump selection ・Pharmaceutical manufacturing company ■ Cost reduction using a non-water-injection pump ・Instant noodle manufacturing factory ■ Proposal for pumps suitable for preventing cavitation ・Aluminum electrolytic capacitor manufacturing factory, among others *For more details, please refer to the PDF document or feel free to contact us.

• Special Pump
• Other pumps
• Syringe Pump

Since aluminum electrolytic capacitors are directly related to the safety and quality of automobiles, there is a demand for further improvement in their performance and quality. In the manufacturing equipment for aluminum electrolytic capacitors, vertical axis pumps of the tank type are used for transferring electrolyte liquid close to its boiling point (95°C). However, in the new product manufacturing process, the electrolyte liquid becomes even hotter, and it was found in internal tests by users that the existing pumps could not meet the required suction performance of NPSH.Av1.3m or higher, leading to cavitation. We received a consultation from users who wanted to consider a maintenance-friendly horizontal land pump that would not cause cavitation, instead of a tank-type pump. [Case Study] ■ Site: Aluminum electrolytic capacitor manufacturing factory ■ Challenge - To suppress cavitation even with high-temperature liquid at low water levels using a horizontal land pump ■ Proposal - Introduction of a low NPSH stainless steel vortex pump, MAP type ■ Effect - Achieved stable transfer of high-temperature liquid and reduction of initial and running costs *For more details, please refer to the PDF document or feel free to contact us.

• Special Pump
• Other pumps

Here is a case study of a liquid seasoning manufacturer that introduced Maruhachi Pump Manufacturing's "Pump." At the company, it took a long time to dissolve salt crystals in the circulation tank that produces saturated saltwater, creating a bottleneck in the process. In response, we conducted a thorough investigation of the piping conditions and usage requirements, and proposed the replacement with a "same diameter, high head pump" that could utilize the existing piping as is, which was adopted. As a result, we achieved an increase in flow rate (theoretical value of 20%), speeding up the circulation rate and reducing the time required for dissolution. We received positive feedback for maximizing the use of existing equipment. If you have any concerns regarding corrosion resistance or special liquids, please contact us. [Case Study] ■ Background - It took a long time to dissolve salt crystals in the circulation tank producing saturated saltwater. - We wanted to increase the dissolution speed in the circulation tank. ■ Solution - We proposed replacing it with a same diameter, high head pump that could utilize the existing piping as is. *For more details, please refer to the PDF document or feel free to contact us.

• Special Pump
• Other pumps
• Other food machinery

The stainless steel spiral pump "MAP type" is a stainless steel spiral pump that accommodates a wide range of fluids, including slurry and viscous liquids, thanks to the adoption of a full-open impeller. It is effective in various applications such as the transfer, injection, filtration, stirring, and pumping of low-boiling point liquids and special liquids. 【Features】 - Easy disassembly and assembly using a back pull-out method without removing the piping - Various customizations available, including with sleeves and shaft seals - Capable of handling severe suction conditions such as hot water, low-boiling point liquids, and vacuum extraction - Available in a wide range of sizes for various applications *Demo units are available for loan. Please give it a try. For detailed specifications, please download the PDF or feel free to contact us.

• Special Pump

The pump circulating plant oil for frying is always exposed to high temperatures, so conventional methods require cooling water to reduce damage to the shaft seal area. This entails not only water utility costs but also the need for piping for the cooling water and drainage measures for the cooling water. Our company has developed a shaft seal method that does not require cooling water. By adopting a water-free mechanical seal, we have eliminated the need for cooling and drainage facilities, contributing to a reduction in initial and running costs of the equipment. [Case Summary] ■ Background: The shaft seal area becomes high temperature, making operation impossible without cooling. ■ Solution: Adoption of a shaft seal method that does not require cooling water. ■ Effect: Simplification of factory equipment and reduction of running costs. *For more details, please refer to the PDF document or feel free to contact us.

• Special Pump
• Other pumps
• Syringe Pump

This time, we received an inquiry from a pharmaceutical manufacturing company expressing a desire to "reduce high overhaul costs and labor expenses," and we proposed a solution. The plunger pump they were using required an overhaul every six months due to wear and seal leakage. Each time, they incurred high repair costs and labor expenses for the removal and installation of the pump. In response, we proposed the AP type, which features a mechanical seal (with a reduced pressure structure) that excels in wear resistance and durability. As a result, even after three years since its adoption, there have been no troubles. The customer expressed satisfaction, stating, "We are glad to have reduced overhaul costs and labor expenses." [Case Overview] ■ Background: Desire to reduce high overhaul costs and labor expenses ■ Solution: Adoption of the slurry pump AP type (vertical, semi-open) ■ Effect: Extended pump life, eliminating the need for parts replacement every six months *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• others
• Special Pump

Our cast iron self-priming pump is used primarily for loading fuel oils such as diesel, kerosene, and gasoline from underground tanks into tank trucks. This product achieves high sealing performance by selecting packing materials and shaft seals that match high suction performance and liquid lifting. 【Overview】 ■ Application Field: Automotive-related ■ Application Process: Fuel oil transportation (gasoline, etc.) ■ Product Used: Cast iron self-priming vortex pump *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

Our 'FVS type' and 'SVC type' vertical pumps are used for paint circulation and UF filter supply (high pressure) in electrodeposition coating equipment. Due to the structure without a shaft seal, there is no concern about liquid leakage. Additionally, the L dimension can be changed to match the depth of the tank. 【Overview】 ■Application fields: Automotive-related ■Process used: Electrodeposition paint (anionic, cationic) ■Products used: Vertical tank pumps FVS type and SVC type *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

Pressurized flotation is one of the treatment methods mainly used in water treatment, which generates fine bubbles (microbubbles) in water, mixes these bubbles with water containing suspended solids to capture the suspended substances, and then utilizes the buoyancy of the bubbles to float them to remove the suspended solids from the water. Our "MBT type" generates nano-level fine bubbles. [Overview] ■ Application Field: Water Treatment ■ Process: Pressurized Flotation ■ Product: MBT Type *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Other water treatment equipment

Pure water plays an important role in various industries such as boiler water, cleaning water, and food ingredients. Our "2FH type stainless steel centrifugal pump" is used in the process of passing raw water through ion exchange resin. 【Overview】 ■ Application Field: Water Treatment ■ Application Process: Pure Water Production ■ Product Used: 2FH Type Stainless Steel Centrifugal Pump *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Other water treatment equipment

The solvent recovery device is a system that distills and regenerates used solvents. Our "Stainless Steel Cascade Pump" is adopted in this recovery device. 【Overview】 ■Adopted Field: Environment ■Adopted Process: Solvent Recovery Device ■Adopted Product: Stainless Steel Cascade Pump *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Wastewater/wastewater treatment equipment
• Other water treatment equipment

In our waste oil recycling equipment, we use our "gear pumps" that can handle high viscosity materials such as viscous lubricating oils or greases, in addition to fuel oils. The "T type" and "NHG type" are medium to high pressure models, and they achieve low noise levels particularly due to the adoption of non-circular gears. [Overview] ■Application Field: Environment ■Process: Waste Oil Recycling ■Products Used: Gear Pumps T type, NHG type *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps
• Wastewater/wastewater treatment equipment

Binary power generation is a method of geothermal power generation that utilizes steam generated by heating a medium with a lower boiling point than water, such as ammonia or freon, using hot water when only relatively low pressure and temperature hot water can be obtained. This steam is then used to drive a turbine for electricity generation. For the transfer of hot water with high concentrations of sulfate ions and chloride ions, our 'FIE-type stainless steel pump', which is resistant to corrosion and has high durability, is used. [Overview] ■ Application Field: Environment ■ Application Process: Geothermal Power Generation (Binary) ■ Product Used: FIE-type Stainless Steel Pump *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Other energy equipment

Our resin, which has excellent chemical resistance, is widely used in various chemical industries against corrosive substances such as hydrofluoric acid, hydrochloric acid, and sulfuric acid that can corrode metal materials. Additionally, we offer a wide range of pumps made from standard stainless steel and special stainless steel. For more details, please contact us. 【Overview】 ■Application Fields: Chemicals ■Resin Materials: PP, FRP, HT-PVC *For more information, please refer to the PDF document or feel free to contact us.

• Other pumps
• Plastic utensils and containers

We offer special stainless steels such as SCS16, Carpenter, Hastelloy C, and duplex stainless steel for transfer liquids that cannot be handled with standard stainless materials. Chemical slurries and special liquids require expertise in material selection due to factors like corrosion resistance, wear resistance, and heat resistance. If you provide us with the transfer liquid and usage conditions, we will select the appropriate material for you. [Overview] ■Application Fields: Chemicals ■Special Stainless Steels: SUS316L, Hastelloy, Duplex Stainless Steel *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• stainless

Our company uses SUS304 and SUS316 as standard stainless steel materials. They are resistant to various solvents, acetic acid, concentrated sulfuric acid, and caustic soda, and are widely used in chemical plants. Additionally, they have numerous applications as pure water, edible oil, and alcohol transfer pumps in food and beverage factories as well as semiconductor plants. [Overview] ■Adopted fields: Chemistry ■Standard stainless steel materials: SUS304, 316 *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• stainless

Bond treatment refers to a type of metal surface treatment known as phosphate coating. It forms a layer of phosphate compounds on the surface of metals (mainly iron) to protect the metal itself from corrosion such as rust. Our 'FM type' is used after the acid cleaning and rinsing processes, which are part of the pre-treatment for metals. [Overview] ■ Application fields: Plating, surface treatment ■ Process used: Bond treatment (phosphate treatment) ■ Product used: FM type *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

Electroless plating, also known as chemical plating, is a method that differs from electroplating in that it reduces and deposits metal from a solution using chemical agents. This method allows for uniform thickness plating on parts with complex shapes and can also be applied to non-conductors such as plastics and ceramics. Our "2PDM type" is suitable for the transfer of electroless plating solutions that meet the wear resistance, durability, and corrosion resistance required for automotive parts and electronic components. [Overview] ■ Application Field: Chemistry ■ Process Used: Electroless Nickel Plating ■ Product Used: 2PDM Type *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps

Our "2PM type line pump" is used in equipment for shower washing and filtering dry film applied to printed circuit boards. It is adopted by a wide range of users due to its resistance to some foreign matter contamination, compatibility with highly permeable liquids, and the ability to be installed in a space-saving manner. 【Overview】 ■Adoption fields: Semiconductors, Batteries ■Adoption process: Printed circuit board cleaning ■Adopted product: 2PM type line pump *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps

Silicon wafers for solar cells are in high demand across a wide range of fields, including semiconductors and LEDs. The wire is operated at high speed, and an abrasive slurry is applied to the wire. The material is cut by the abrasive. Our 'PP Pump', which has excellent wear resistance, is used for the transfer of that abrasive slurry. [Overview] ■ Application Fields: Semiconductors, Batteries ■ Application Process: Slicing Process ■ Product Used: PP Pump *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The stainless steel spiral pump "MAP type" is a stainless steel spiral pump that accommodates a wide range of fluids, including slurry and viscous liquids, thanks to the adoption of a full-open impeller. It is effective in various applications such as the transfer, injection, filtration, stirring, and pumping of low-boiling point liquids and special liquids. 【Features】 - Easy disassembly and assembly with a back pull-out method without removing the piping - Various customizations available, including with sleeves and shaft seals - Capable of handling severe suction conditions such as hot water, low-boiling point liquids, and vacuum extraction - Available in a wide range of sizes for various applications *Demo units are also available. Please feel free to contact us. In addition to the catalog for this product, we are also offering a comprehensive catalog. You can view a wide lineup of stainless steel spiral pumps.

• Special Pump

We will introduce a case study on the development of an engine-driven fuel pump. We received a request for a pump that can be used for refueling even without a power supply during disasters. Therefore, we developed and proposed a compact, lightweight, and portable engine-driven fuel pump. Our customers have provided positive feedback, stating that it is easy to handle and convenient to carry. 【Case Study】 ■ Client's Request - A pump that can be used for refueling even without a power supply during disasters. ■ Proposal - Easy to operate - Compact, lightweight, and portable *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

We will introduce a case study of the development of a "PP pump." We were using a metal coolant pump for the transfer of abrasive slurry, but due to severe wear on the impeller and the need for frequent replacements, we were asked to create a pump that is resistant to wear. As a result, we manufactured a PP pump with high wear resistance, featuring a seal-less and completely metal-free design. The excellent wear resistance was recognized, leading to its formal adoption. 【Case Study】 ■ Client's Requests and Challenges - Severe wear on the impeller due to slurry, requiring frequent replacements. ■ Proposal - Completely seal-less and metal-free design. - Suggested using resin materials for hard slurry. - Designed with a focus on wear resistance to accommodate special slurries. *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

This is an introduction to a case study on the development of a stainless steel spiral pump. In a hot spring area in Kyushu, the construction of a geothermal power plant (binary power generation) was underway. The pumps used here needed to be durable enough to withstand high temperatures and sulfate springs. Additionally, there were many accommodations and residences in the vicinity, so high quietness was also required for the equipment used. Therefore, the pump was manufactured using SUS316, which is resistant to corrosion and durable. Furthermore, at the time of delivery, noise tests (dB) and octave band analysis were conducted, and only those that met the noise standards were used. [Case Study] ■ Client's Requests and Challenges - Due to the construction of a geothermal power plant (binary power generation) in a hot spring area, durability to withstand high temperatures and sulfate springs was necessary. - Since there were many accommodations and residences nearby, high quietness was desired. ■ Proposal - Use of SUS316 material, which is resistant to corrosion and durable. - Conduct noise tests (dB) and octave band analysis at the time of delivery to meet noise standards. *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

This is an introduction to the development case of the electrolysis nickel plating solution transfer pump "2PDM-27M." Electroless nickel plating solution plates all objects it comes into contact with. Furthermore, the pumps used by the customer had mechanical seals and gland packing that were also plated, requiring frequent replacement and repair. In response, we designed and proposed a pump specifically for the electroless nickel plating solution. After implementation, a single pump can transfer and circulate both the electroless nickel plating solution and nitric acid, simplifying operations to just valve switching and reducing work time. [Case Study] ■ Client's Requests and Challenges - The electroless nickel plating solution plates all objects it comes into contact with. - The previously used equipment required frequent replacement and repair. - A resin pump with a special seal experienced thermal deformation at high temperatures. ■ Proposal - Corrosion and heat resistance measures for plating solutions and cleaning processes. - A special seal structure that does not come into contact with the liquid. - An internal structure that eliminates sliding parts in the liquid. *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "SVC type" is a stainless steel vertical shaft vortex pump. The casing has a seal-less structure in the liquid. It can be used for applications such as the transfer of corrosive liquids, the transfer of general wastewater, and the treatment of sewage. Additionally, since it is installed on top of a liquid tank or reservoir, there is no concern about liquid leakage and it is durable. 【Features】 ■ Installed on top of a liquid tank or reservoir ■ No concern about liquid leakage ■ Durable ■ Can be installed in a space-saving manner ■ Custom manufacturing of external types is also possible *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps
• Wastewater/wastewater treatment equipment
• Other physicochemical equipment

Our Cascade Pump 'FKF Type' is compact, lightweight, and easy to integrate into equipment. It uses a mechanical seal for the shaft seal. The 'FKF Type Series' includes two models: 'FKF-M Type' and 'FKF-27M Type'. The 'FKF-M Type' is made of FC + CAC and can be used for clean water, hot water, and heat transfer fluids. The 'FKF-27M Type' is made of SCS13 and is suitable for acid resistance. We also offer the "2CJS-FM Type Cast Iron Self-Priming Motor Pump," which can be used for the transfer of chemical liquids. 【Features】 ＜FKF-M Type＞ ■ Uses a mechanical seal for the shaft seal ■ Made of FC + CAC ■ Suitable for clean water, hot water, and heat transfer fluids ＜FKF-27M Type＞ ■ Made of SCS13 ■ Acid resistant *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Other cleaning machines
• Filtration Equipment

The "MAP type" is a stainless steel vortex pump that accommodates slurry liquids and viscous liquids (performance: 450 mP·s) by adopting a full-open impeller. It achieves a low NPSH-Re (compared to our products) and can be used under severe suction conditions such as hot water, low boiling point liquids, and vacuum extraction. 【Features】 ■ By adopting a full-open impeller, it can handle a wider range of fluids than conventional models. ■ The back pull-out design allows for easy disassembly and assembly without removing the piping. ■ Customization options are available for various components, including sleeves and shaft seals. ■ It is widely used for applications such as injection, filtration, mixing, and pumping. *For more details, please refer to the documentation. We also have demo units available. Feel free to contact us.

• Special Pump

Maruhachi's "Stainless Steel Magnetic Spiral Pump" adopts a seal-less structure that does not use either gland packing seals or mechanical seals. As a result, there is no liquid leakage, making it an appropriate pump for the transfer and circulation of various chemical agents, cleaning solutions, expensive special liquids, and liquids at high or low temperatures. Since there is no liquid leakage, it does not dirty the area around the pump, and it is increasingly in demand as a pump for creating a clean environment. Customers troubled by liquid leakage from the shaft seal of existing pumps, as well as those planning for a seal-less structure in the future, are encouraged to consult with us freely. For more details, please contact us or download the catalog.

• Other pumps

Maruhachi's chemical pumps are available in the following types: "SFV self-priming type," "TFV non-self-priming type," and "RE tank internal and external hard type." Due to their excellent durability, they can be used in various applications such as waste liquid and wastewater treatment, chemical industry, metal industry, etching equipment, exhaust gas cleaning equipment, and more. 【Features】 <SFV Type> - Excellent corrosion resistance and heat resistance - The seal operates with an automatic centrifugal opening and closing device, ensuring a non-contact state during operation - When the rotation decreases towards stopping, the seal closes, preventing liquid leakage - Only the initial water supply is required for self-priming - Self-priming pump that automatically retains self-priming water *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "Cascade Pump" from Maruhachi is a registered trademark name given by our founder, and "Cascade" means "a narrow waterfall." As it has been widely and commonly used in household and industrial applications, this name has become synonymous with this type of pump, and it was made publicly available in 1949. The "Cascade Pump" can produce high lift despite its small capacity and is easy to compact, making it suitable for a wide range of applications, such as built-in units for devices and washing machines, and we are mass-producing it. We offer products including stainless steel motor pumps, stainless steel self-priming motor pumps, stainless steel boiling point pumps, stainless steel self-priming cascade pumps, stainless steel cascade pumps, cascade pumps, and cast iron self-priming motor pumps. For more details, please contact us or download the catalog.

• Other pumps

It has a wide range of applications and stable performance. By freely combining the optimal structures and materials that can be selected according to the purpose and use, it can accommodate a wide range of applications from clean water to special liquids, refrigerants, and heat transfer fluids. Additionally, you can choose the most suitable model from a rich variety of options. There is no waste from operating at specifications beyond what is necessary, and it operates with high efficiency at all times, resulting in reduced running costs and economic benefits. You can use it with confidence even under harsh conditions. Each component is highly modularized, making maintenance easy. For more details, please contact us or download the catalog.

• Other pumps

It features an easy-to-handle, rational design with high-quality reliability and durability, and in the case of disassembly, the impeller, shaft, and bearings can be removed as a unit without disconnecting the piping, making maintenance easy. Since it is equipped with a self-priming structure developed by our company that includes a vortex air-water separation mechanism, once the pump is filled with water initially, it will begin self-priming simultaneously with operation thereafter, maintaining a fast and high suction capability at all times. Because it is mass-produced using a standardized method, the delivery time is short, and it can be purchased at a low cost. We have adopted a semi-open impeller design, but for the SP type, a closed impeller assembly is also possible (the model will be SG type). The shaft sealing part is standardly equipped with gland packing or mechanical seal. The materials for the packing, gland packing, and mechanical seal, including the self-priming valve, can be changed depending on the handled liquid, so please consult us. For more details, please contact us or download the catalog.

• Other pumps

The "MPHO type" is a SUS304 spiral pump designed for embedded devices. Made of stainless steel plate (pump section), it achieves a compact and lightweight design. The applicable liquid temperature (for clean water) can reach up to 80°C. Due to its integrated structure with the motor, centering is unnecessary. The motor is an outdoor type with a totally enclosed external fan and has a built-in protector (manual reset type). 【Features】 ■ Compact, lightweight, and inexpensive ■ High efficiency, low noise ■ No need for centering due to the integrated structure with the motor ■ Capable of handling liquid temperatures up to 80°C ■ The motor is an outdoor type with a totally enclosed external fan and has a built-in protector (manual reset type) *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "2PDM type" is a stainless steel line pump designed for the transfer of electroless plating solutions, featuring a non-contact sealing method and no galling. With the adoption of a special dry seal, there is no leakage from the seal during operation. Its vertical design allows for easy installation and minimal space usage, and it can be disassembled and assembled while still piped. There is a proven track record of over 1,500 units delivered to a major plating processing company. 【Features】 ■ Suitable for the transfer and circulation of high-temperature electroless plating solutions (85-95°C). ■ Non-contact sealing method and galling-free stainless steel pump. ■ No leakage from the seal during operation due to the use of a special dry seal. ■ No sliding parts such as internal bearings in the pump. ■ Can operate dry. 【Applications】 Electroless plating solutions, slurry waste liquids, rust prevention liquids, various pre- and post-treatment liquids, various plating solutions, various high-temperature chemical liquids, cleaning liquids, and other scientific liquids. *For more details, please request documentation or view the PDF data available for download.

• Other pumps

The "Non-self-priming Cascade Pump MM type" achieves high lift with low power consumption and is compact and lightweight, using a mechanical seal for the shaft seal. The "Self-priming Cascade Pump MSSK type" has a maximum suction height of 6m with clean water. It also achieves high lift with low power consumption and is compact and lightweight, using a mechanical seal for the shaft seal. For more details, please contact us or download the catalog.

• Other pumps

Utilizing the suction power of the pump, air is automatically drawn from the air control unit, and the gas-liquid mixture is stirred and pressurized with a mixing pump that has excellent gas-liquid mixing capabilities. By dissolving the gas and liquid in the blender box, fine bubbles are generated from the discharge side adjustment valve. 【Examples of Applications】 ■ Pressurized floating device ■ Gas-liquid mixture transfer ■ Milky white bath ■ Hydroponics ■ Dissolved oxygen increase ■ Cleaning device 【What are fine bubbles?】 Bubbles smaller than 1 to 100 μm are called microbubbles, and bubbles smaller than 1 μm are referred to as ultrafine bubbles (nanobubbles). All bubbles smaller than 100 μm are collectively called fine bubbles. *For more details, please request materials or view the PDF data available for download.

• Other physicochemical equipment

The "gather pump" can self-prime to a height of 6 meters in one minute. Additionally, it is possible to continuously move the suction hose to the next tank without stopping the pump. It is ideal for continuous operation in processes such as bottling food and drinking water, filter pressing of food and drinking water (filtration in the shochu production process), and extracting liquids from individual drums. We also have demo units available, so please contact us. 【Specifications】 ○ Flow rate → 50L/min (50Hz), 100L/min (60Hz) ○ Total lift → 15m ○ Rotational speed → 1450min-1 (50Hz), 1750min-1 (60Hz) ○ Power → 3.7kW ○ Standard accessories → Portable cart (with handle) → Drain valve (1/4B) → ON/OFF switch For more details, please contact us or download the catalog.

• Other pumps

【Stainless Steel Gear Pump ORV-27 Type / Lockless Pump ORV Type】 ○ For discharge pressure up to 0.3MPa ○ Standard V-belt drive at 550 RPM or below 【High Lockless Pump NHG Type】 ○ Built-in safety valve as standard ○ Direct coupling type ○ For discharge pressure up to 0.6MPa 【Stainless Steel Cast Iron Gear Pump T Type】 ○ Suitable for lubricating liquids due to internal bearings (metal) ○ For discharge pressure up to 1MPa ○ 1000min-1 and 1500min-1 are direct motor connection, others are V-belt drive 【External Bearing Stainless Steel Gear Pump HG-27 Type】 ○ Standard V-belt drive for use at 430 RPM or below ○ For discharge pressure up to 0.3MPa 【Rotary Pump W Type】 ○ External bearing structure, no metal contact in liquid contact parts, wear-resistant, high durability ○ Easy to assemble sanitary structure ○ Does not destroy or change the liquid quality For further details, please inquire or download the catalog.

• Other pumps

【Specifications】 ○Diameter →10, 15, 20, 25, 40, 50, 65 (All models have RC threads) ○Flow Rate →1L/min to 500L/min (Approximately 2/3 if the impeller is NBR) ○Head →1m to 30m (Approximately 1/2 if the impeller is NBR) ○Shaft Seal Type →Oil seal type, Mechanical seal type ○Motor Pole Count →4P, 6P ○Pump Rotation Speed →1000 min-1 to 1800 min-1 For more details, please contact us or download the catalog.

• Other pumps

The magnet drive vane pump, designed to pursue "quietness," features a completely sealed structure that prevents liquid leakage. It is also suitable for applications in the "low flow range," which are difficult to achieve with standard pumps. Please select the pump you desire from the standard performance table. Additionally, this product is a collaboration with Tohshin Technical Co., Ltd., which boasts cutting-edge precision technology. For more details, please contact us or download the catalog.

• Other pumps
• Vacuum pump

The self-priming cascade pump "SUP type" is a product that can be used for various solvent transfer, cleaning machines, chemical industry applications, and plant integration. The impeller features an automatic balance structure, ensuring complete thrust balance and exceptional durability. Disassembly and assembly are easy for anyone during maintenance and inspection. It is a compact and lightweight type that provides high lift with low power. Moreover, it boasts high-performance self-priming capability and can accommodate various motors. 【Features】 ■ Suitable for various solvent transfer, cleaning machines, chemical industry applications, and plant integration ■ Easy disassembly and assembly during maintenance and inspection ■ High-performance self-priming capability *For more details, please request documentation or view the PDF data available for download.

• Other pumps

"Sludge sedimentation causes the pump to not restart..." "Due to sludge, the pump experiences uneven wear..." "Due to sludge, the shaft seal fails quickly..." "Vacuum extraction is not quite effective and doesn't work well..." The slurry high-concentration liquid transfer dedicated "ALL PUMP AP type" solves these problems! 【Features】 ■ Excellent wear resistance. ■ Outstanding durability of the mechanical seal for the shaft. ■ Easy transfer of high-concentration, high-viscosity liquids. ■ Exceptional suction power at high vacuum levels. Self-priming capability is also possible. *For details, please request materials or view the PDF data from the download. *Demo units are also available. Please feel free to contact us.

• Other pumps
• Vacuum pump