八洲興業販売 List of Products and Services

The "Sickle Shape Series" features a blade shape resembling a sickle, which reduces rear turbulence and achieves noise reduction by elongating the chord and thinning the trailing edge. Additionally, this blade shape can secure high static pressure at low rotation speeds, allowing for even greater noise reduction. As for applications in devices/machines, it is suitable for radiators/engine cooling in refrigeration equipment, oil coolers, compressors, generators, etc., where relatively high static pressure is required. 【Features】 ■ Low noise ■ Blade shape resembling a sickle ■ Impeller diameters can be manufactured from 284mm to 2490mm *For more details, please refer to the PDF document or feel free to contact us.

• fan

The "Broad Battle Series" generates a large airflow even at low rotations due to its wide blades, resembling a canoe paddle battle. The low rotation results in reduced wind noise, contributing to noise reduction. The impeller diameter can be manufactured from 360mm to 1630mm. Leveraging its low noise, it is widely used in cooling towers, air-cooled condensers, evaporators, oil coolers, and large ventilation fans. 【Features】 ■ Low rotation, large airflow ■ Wide blades resembling a canoe paddle battle ■ Reduced wind noise, contributing to noise reduction ■ Impeller diameter can be manufactured from 360mm to 1630mm *For more details, please refer to the PDF materials or feel free to contact us.

• fan

The "Increasing Arc Series" features a non-twisted arc cross-section shape, with blades that widen towards the tip, allowing for the maintenance of airflow and static pressure even with inefficient suction shapes. It is suitable for applications such as engine-driven radiator units, construction machinery, and compressors. Additionally, impeller diameters can be manufactured from 284mm to 1250mm. 【Features】 ■ Large airflow and high static pressure ■ Non-twisted arc cross-section shape ■ Impeller diameters can be manufactured from 284mm to 1250mm *For more details, please refer to the PDF document or feel free to contact us.

• fan

The "Aerofoil Series" features blades with a wing cross-section shape that incorporates twists for high efficiency, and has a sales record of over 50 years. Impeller diameters can be manufactured from 200mm to 2700mm. Applications widely utilize high efficiency in cooling devices and blowers, such as those involving coils and radiators, as well as dryers and other equipment that require airflow. 【Features】 ■ High efficiency ■ Blades with twists added to the wing cross-section shape ■ Impeller diameters can be manufactured from 200mm to 2700mm ■ Widely used in all types of equipment that require airflow *For more details, please refer to the PDF document or feel free to contact us.

• fan

The combination of the Pressure Max 6 type blade and 7 types of hubs (for blade counts of 5, 6, 7, 8, 9, 12, and 16) allows for the selection of 64 different types of impellers by choosing the number of blades and pitch angle. The impeller diameter can be set from 627mm to 1270mm in 1mm increments. *For more details, please contact us or download the catalog.*

• fan

The "King Nozzle TYPE-S Series" is a full cone spray nozzle that sprays in the same (straight) direction as the attached piping. The spray angle is relatively small, and the mist particles are coarser and larger compared to a hollow cone, making it suitable for applications that require impact force. It is ideal for cleaning, cooling, watering, defoaming, and also for cleaning off residues. Additionally, since it is made of resin (polypropylene: PP), it is resistant to acids and alkalis, making it well-suited for surface cleaning before painting or plating. 【Features】 ■ Full cone type ■ Built-in cross blades ■ Relatively small spray angle *For more details, please contact us or download the catalog.

• nozzle

The "King Nozzle TYPE-CD Series" is a full cone spray nozzle made of PP (polypropylene). It was developed as an enlarged version of our product "TYPE-AS." The spray angle is relatively small, and the mist particles are coarser and larger compared to hollow cone types, making it ideal for cleaning, cooling, watering, and defoaming. Additionally, since it is made of resin (polypropylene: PP), it is resistant to acids and alkalis, making it suitable for surface cleaning before painting or plating. 【Features】 ■ Relatively small spray angle ■ Full cone type ■ Built-in cross blades *For more details, please contact us or download the catalog.

• nozzle

The "King Nozzle TYPE-AS Series" is a basic type spray nozzle with a full cone spray pattern. The spray angle is relatively small, and the mist particles are coarser and larger compared to hollow cone types, making it ideal for cleaning, cooling, watering, and defoaming. Additionally, it is made of resin (polypropylene: PP), which is resistant to acids and alkalis, making it suitable for surface cleaning before painting or plating. 【Features】 ■ Full cone spray type ■ Relatively small spray angle ■ Built-in cross blades *For more details, please contact us or download the catalog.

• nozzle

The "King Nozzle TYPE-CDH Series" is a PP (polypropylene) spray nozzle with a hollow cone spray pattern. It was developed as an enlarged version of TYPE-NF. Compared to other hollow cone types, the particles are larger, and the flow rate is also higher, making it ideal for large-volume cooling, humidification, and defoaming. Additionally, it is suitable for air cleaning and washing in large-volume air washers and scrubbers, watering in large-scale agricultural irrigation and livestock applications, as well as defoaming in wastewater treatment plants. Being made of resin, it is resistant to acids and alkalis, making it suitable for surface cleaning before painting or plating. 【Features】 - Ideal for large-volume cooling, humidification, and defoaming - Structure that is resistant to clogging - Two sizes of mounting screw threads: 1/2” and 3/4” *For more details, please contact us or download the catalog.

• nozzle

The "King Nozzle TYPE-NF Series" is a PP (polypropylene) spray nozzle with a hollow cone spray type. Like TYPE-F, it generates relatively fine mist particles within the King Nozzle series, making it ideal for cooling and humidifying. It is also suitable for air cleaning applications such as air washers and scrubbers, as well as for irrigation in agriculture and livestock, and for defoaming in wastewater treatment plants. Being made of resin, it is resistant to acids and alkalis, making it suitable for surface cleaning before painting or plating. 【Features】 ■ Structure with minimal clogging ■ Relatively fine mist *For more details, please contact us or download the catalog.

• nozzle

The 【TYPE-MY】 is a metal spray nozzle that produces a large volume of fine mist at low pressures of 0.2 to 0.3 MPa (approximately the pressure of tap water). It contains fine mist particles around 10 µm and relatively larger particles of about 250 µm, so it is not a dry mist. However, in outdoor settings where water wetness is not an issue, it provides cooling through latent heat with a large amount of fine mist, as well as cooling effects from the water splash effect. - In gardens and rooftop gardens: It sprays upward, simultaneously achieving cooling and watering effects for the surrounding atmosphere, as well as visual effects. - On building rooftops: The fine mist and splash effects cool the surrounding rooftop area, provide watering, and contribute to the cooling of the rooftop surface, thereby reducing the building's cooling load. - In sports fields, golf courses, tennis courts, and outdoor pools: A refreshing breeze containing droplets is generated, effectively mitigating heat.

• nozzle
• spray
• Plating Equipment

The 【TYPE-ID】 is a PP (polypropylene) spray nozzle of the jet type that ejects water into the solution. By spraying water into the solution, it attracts the surrounding solution and stirs up several times the amount of solution ejected. Made of PP (polypropylene), it has excellent chemical resistance and is ideal for stirring in pre-treatment tanks for painting and plating. It is manufactured through machining and is a single-piece design, so there are no combinations. There is only one connection size available.

• nozzle
• spray
• Plating Equipment

The 【TYPE-FF】 is a flat-type spray nozzle made of PP (polypropylene) that sprays in a nearly semicircular pattern. Its wide spray angle makes it most suitable for watering and effective for agricultural irrigation and snow melting measures. Due to its wide-angle spray, it can also be adapted for extensive cleaning and defoaming. Additionally, being made of resin, it is resistant to acids and alkalis, making it ideal for surface cleaning before painting or plating. As it is a one-piece design, there are no combinations available. There are six types in the lineup based on different spray nozzle diameters. The differences in nozzle diameter result in variations in spray angle and spray volume.

• nozzle
• spray
• Plating Equipment

The 【TYPE-FMS】 is a flat-type spray nozzle made of PP (polypropylene) that provides a strong spray even with a small amount of water. Due to its low flow rate, the mounting screw size is also small at 1/8” (male thread), and it generates a fine mist in a one-piece design. It was developed for use in automatic car wash watering systems, but its applications have expanded widely. It is suitable not only for cleaning and watering but also for defoaming, and larger spray diameters can utilize impact force. Additionally, being made of resin, it is resistant to acids and alkalis, making it ideal for surface cleaning before painting or plating. As it is a one-piece design, there are no combinations available. There are four types in the lineup based on different spray diameters, which result in variations in spray angle and spray volume.

• nozzle
• spray
• Plating Equipment

The 【TYPE-FML】 is a flat-type spray nozzle made of PP (polypropylene). It was developed as a high-flow version of our "TYPE-FM" and further enhances the impact power of FM. It is particularly effective for washing off dirt and is also suitable for watering and defoaming. Since it is a one-piece design, there are no combinations. There are four types available based on the difference in spray nozzle diameter. The spray angle and spray volume vary depending on the nozzle diameter. Additionally, being made of resin, it is resistant to acids and alkalis, making it ideal for surface cleaning before painting or plating.

• nozzle
• spray
• Plating Equipment

The 【TYPE-FM】 is a flat-type spray nozzle made of PP (polypropylene) that provides a strong spray even with a small amount of water, making it suitable for cleaning tasks that require high impact force. It is a one-piece design, so there are no combinations. There are six types available, differing in spray nozzle diameter. The spray angle and spray volume vary depending on the nozzle diameter. It is ideal for cleaning tasks that require impact force, such as rinsing, as well as for watering and defoaming. Additionally, being made of resin, it is resistant to acids and alkalis, making it well-suited for surface cleaning before painting or plating.

• nozzle
• spray
• Plating Equipment

We only handle the TF type among the products of Bete-Fog Inc. in America. Its spiral shape has no internal obstructions, making it less likely to clog, and it has a larger particle diameter, which provides a strong impact force at high spray pressures. In addition to resin materials like PP, PVC, and Teflon, there are also metal options such as SUS-316 and brass, making it suitable for high-temperature environments where resin nozzles cannot be used, as well as for firefighting applications. It can be used for a variety of purposes, including washing, cooling, watering, firefighting, and humidifying.

• nozzle
• spray
• Plating Equipment

The 【TYPE-S-100】 is a full cone spray type large flow rate spray nozzle. There are four types available based on the mounting screw size, each offering two spray angles of 90° (M) and 120° (W). The type with the largest mounting screw size of 2-1/2” (S-104X) achieves a flow rate exceeding 800 L/min at 0.5 MPa. The mist particles are very large and can also be utilized for their impact force. (Due to the large particle size, our measurement method cannot measure particle diameter.) It is ideal for watering large cooling towers, as well as for cleaning, cooling, defoaming, and humidifying with large volumes of water.

• nozzle
• spray
• Plating Equipment

The 【TYPE-SL】 is a high-flow full cone spray nozzle "TYPE-S" that sprays in the same (straight) direction as the installation piping. The spray angle is relatively small, around 90°, and the mist particles are coarser and larger compared to "TYPE-S," making it suitable for applications that require impact force. It is ideal for cleaning, cooling, watering, defoaming, and is also perfect for washing off contaminants. Additionally, since it is made of resin (polypropylene: PP), it is resistant to acids and alkalis, making it well-suited for surface cleaning before painting or plating.

• nozzle
• spray
• Plating Equipment

The 【TYPE-S】 is a full cone spray nozzle that sprays in the same (straight) direction as the installation piping. The spray angle is relatively small, and the mist particles are coarser and larger compared to a hollow cone, making it suitable for applications that require impact force. It is ideal for cleaning, cooling, watering, and defoaming, as well as for cleaning that involves rinsing off. Additionally, since it is made of resin (polypropylene: PP), it is resistant to acids and alkalis, making it well-suited for surface cleaning before painting or plating.

• nozzle
• spray
• Plating Equipment

The 【TYPE-CD】 is a full cone spray type nozzle made of PP (polypropylene). It was developed as an enlarged version of our "TYPE-AS." The spray angle is relatively small, and the mist particles are coarser and larger compared to the hollow cone type, making it ideal for cleaning, cooling, watering, and defoaming. Additionally, since it is made of resin (polypropylene: PP), it is resistant to acids and alkalis, making it suitable for surface cleaning before painting or plating.

• nozzle
• spray
• Plating Equipment

The 【TYPE-AS】 is a basic type spray nozzle with a full cone spray pattern. The spray angle is relatively small, and the mist particles are coarser and larger compared to the hollow cone type, making it ideal for cleaning, cooling, watering, and defoaming. Additionally, it is made of resin (polypropylene: PP), making it resistant to acids and alkalis, and suitable for surface cleaning before painting or plating.

• nozzle
• spray
• Plating Equipment

The 【TYPE-NF】 is a PP (polypropylene) spray nozzle of the hollow cone spray type. It was developed as an enlarged version of TYPE-NF. Compared to other hollow cone types, the particles are larger, and the flow rate is higher, making it ideal for large-volume cooling, humidifying, and defoaming. It is also suitable for air cleaning and washing in large-volume air washers and scrubbers, as well as for irrigation in large-scale agriculture and livestock, and for defoaming in wastewater treatment plants. Being made of resin, it is resistant to acids and alkalis, making it suitable for surface cleaning before painting or plating.

• nozzle
• spray
• Plating Equipment

The 【TYPE-NFB】 is a PP (polypropylene) spray nozzle with a hollow cone spray type. It shares the body with TYPE-NF. Due to the rounded edges around the spray opening, it has a large spray angle, allowing for wide-angle spraying. Among the King Nozzle series, it generates relatively fine mist particles, making it ideal for cooling and humidifying. It is also suitable for air cleaning applications such as air washers and scrubbers, as well as for irrigation in agriculture and livestock, and for defoaming in wastewater treatment plants. Being made of resin, it is resistant to acids and alkalis, making it suitable for surface cleaning before painting or plating.

• nozzle
• spray
• Plating Equipment

The 【TYPE-NF】 is a PP (polypropylene) spray nozzle with a hollow cone spray pattern. Like the TYPE-F, it generates relatively fine mist particles within the King Nozzle series, making it ideal for cooling and humidifying. It is also suitable for air cleaning applications such as air washers and scrubbers, as well as for irrigation in agriculture and livestock, and for defoaming in wastewater treatment plants. Being made of resin, it is resistant to acids and alkalis, making it suitable for surface cleaning before painting or plating.

• nozzle
• spray
• Plating Equipment

The 【TYPE-F】 is a basic type spray nozzle with a hollow cone spray pattern. Among the King Nozzle series, it generates relatively fine mist particles, making it ideal for cooling and humidifying. It is also suitable for air cleaning applications such as air washers and scrubbers, as well as for irrigation in agriculture and livestock, and for defoaming in wastewater treatment plants. Made of resin (polypropylene: PP), it is resistant to acids and alkalis, and can be used for surface cleaning before painting or plating.

• nozzle
• spray
• Plating Equipment