グーリングジャパン List of Products and Services

The 'AL' tap for aluminum machining enables ideal thread processing at the highest cutting speeds in both cutting and rolling. It is compatible with almost all aluminum and aluminum casting alloys. The newly developed Carbo+ coating suppresses built-up edges and adhesion. Internal lubrication through radial coolant ducts optimizes coolant supply. It achieves high process reliability and maximizes tool life in both cutting and rolling. *For more details, please refer to the PDF document or feel free to contact us.*

• Tap

The insert exchangeable drill 'GMD' supports hole machining up to a maximum diameter of Φ50 for standard products, and offers holders compatible with inserts and machining depths from 2xD to 5xD according to the workpiece material. It employs two types of inserts with different shapes and characteristics, achieving excellent surface quality and long tool life. The inner blade exhibits outstanding self-positioning performance due to its special shape, enabling high-precision and stable hole machining. The outer blade features optimal carbide material and a high-adhesion, high-hardness HiPIMS coating for extended tool life. Inserts can be easily and securely fastened to the holders, which come in four types, using Torx Plus screws. *For more details, please refer to the PDF document or feel free to contact us.*

• drill

High-efficiency rough machining high-speed milling cutter 'GHM' that balances cost performance and process stability. The stable insert cutting edge achieves the maximum chip removal rate and can be used on four corners for long life. High chip removal capability and reliability achieved by combining with a robust holder. Holder shapes can be selected from straight shank, screw-in type, and shell type. *For more details, please refer to the PDF document or feel free to contact us.

• Milling

Gühring's modular taps, which combine the advantages of carbide and HSS, feature high flexibility and cost-effectiveness. The HSS tool shank can be used up to eight times, and the carbide tool head can be used until it needs to be replaced, resulting in a long lifespan for the taps. The easy-to-replace insert system reduces equipment downtime. With long lifespan and easy head replacement flexibility, it demonstrates excellent cost-effectiveness. The ability to use carbide taps even under unstable conditions is another advantage of this head-replaceable tap. *For more details, please refer to the PDF document or feel free to contact us.*

• Tap

The filter-equipped pull stud bolt, an accessory for GUHRING's tool holder 'GM300', can be used simply by attaching it to an existing BT30 holder. It captures chips by installing a filter on both the coolant tank side and the holder side. This prevents chips from entering the tool's coolant holes. It is effective in preventing sudden tool breakage and coolant hole clogging. *For more details, please refer to our catalog or feel free to contact us.

• Other cutting tools

The 'RT 100 T AL' is optimal for high-precision deep hole machining of aluminum alloys, thanks to its unique cutting edge and ultra-smooth groove shape. The main cutting edge features a concave edge shape and a well-engaged facet grind. It achieves smooth chip evacuation with an extremely smooth ground groove inner surface. With a double margin, it offers high stability for straightness in machining holes, enabling high-precision deep hole machining. *For more details, please refer to the PDF document or feel free to contact us.*

• drill

The ultra-hard three-flute flat drill 'FB 200 U' can be used on flat surfaces without the need for pre-drilling or reducing feed rates, significantly shortening processing time. Compared to two-flute flat drills, it can apply cutting conditions up to 50% higher. It reduces processing costs as no pre-processing is required even for inclined surfaces. The 3xD type can perform spot hole drilling on inclined surfaces and curved surfaces up to 45°. It also achieves higher dimensional accuracy and better roundness for hole quality.

• drill

The "RT 100 FB" ultra-hard micro flat drill with a tip angle of over 180° is optimal for drilling holes in inclined and curved surfaces. Tool diameters range from Φ1 to Φ3 with increments of 0.05. It suppresses burrs at the hole exit. It can drill holes on surfaces inclined up to 45° or on curved surfaces. With a double margin design, it achieves good roundness and allows for optimal guide hole processing. *For more details, please refer to the PDF document or feel free to contact us.*

• drill

The multifunctional turning tool "Quattro Drill" supports various applications with a single tool, enabling tool consolidation and reduction of tool change cycle times. It can perform various turning operations such as center hole processing, drilling, boring, and chamfering with just one tool. The surface treatment uses Signum coating with a hardness of 5500 HV. Its unique diamond-shaped coolant outlet holes provide excellent cooling effects and maximize chip evacuation. *For more details, please refer to the PDF document or feel free to contact us.*

• Other cutting tools

General-purpose square carbide end mills from Guhring's "ECO LINE" series, which balances high quality and cost-effectiveness. Combines high quality and cost-effectiveness through Guhring's technology, offering excellent cost performance. Available in three types: 2-flute, 3-flute, and 4-flute. The outer corner is designed with a pinned edge. *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

General-purpose carbide drills from Guhring's "ECO LINE" series, which achieve a balance of high quality and cost-effectiveness. They combine high quality and economic efficiency through Guhring's technology, offering excellent cost performance. Available in two sizes: 3xD and 5xD. Suitable for machining various materials, including aluminum. *For more details, please refer to the PDF document or feel free to contact us.*

• drill

The ultra-hard end mill series 'POWERMILL' excels in both performance and cost-effectiveness, and is capable of handling various work materials with high versatility. It achieves high chip removal rates through a uniquely developed tool shape, offering high-performance capabilities. Utilizing high-quality, self-manufactured ultra-fine particle carbide materials, it also provides reliability in terms of tool life. This is a versatile ultra-hard end mill series equipped with all-around performance suitable for all types of work materials. *For more details, please refer to the PDF document or feel free to contact us.*

• End Mills

The ultra-hard end mill series 'POWERMILL' excels in both performance and cost-effectiveness, offering high versatility to accommodate various work materials. It achieves high chip removal rates through a uniquely developed tool shape, providing high-performance capabilities. Utilizing high-quality, self-manufactured ultra-fine particle carbide material, it also ensures reliability in terms of tool life. This is a versatile ultra-hard end mill series equipped with all-around performance suitable for all types of work materials. *For more details, please refer to the PDF document or feel free to contact us.*

• End Mills

The ultra-hard end mill series 'POWERMILL' excels in both performance and cost-effectiveness, and is capable of handling various work materials with high versatility. It achieves high chip removal rates through a uniquely developed tool shape, offering high-performance capabilities. Utilizing high-quality, self-manufactured ultra-fine particle carbide materials, it also ensures reliability in terms of tool life. This is a versatile ultra-hard end mill series equipped with all-around performance suitable for all types of work materials. *For more details, please refer to the PDF document or feel free to contact us.*

• End Mills

The 'HT 800 WP' accommodates hole machining up to a maximum diameter of Φ40 with standard products, offering a variety of inserts and holders that support machining depths from 1xD to 10xD, tailored to the workpiece material. The inserts feature a special finish on the cutting edge, providing excellent wear resistance. The holders are designed with a size increment of 0.5mm, ensuring a robust design with high rigidity. The unique groove shape allows for optimal chip evacuation even in deep hole machining. By incorporating a coolant duct on the groove heel side, effective coolant supply to the cutting edge is made possible. *For more details, please refer to the cutting conditions table in the product catalog or feel free to contact us.

• drill

The filter-equipped coolant duct, an accessory for GUHRING's tool holder 'GM300', can be used simply by attaching it to existing HSK holders. In addition to the coolant tank side, a filter is also installed on the holder side to capture chips. This prevents chips from entering the tool's coolant holes. It effectively addresses issues such as unexpected tool breakage and coolant hole clogging. *For more details, please refer to our catalog or feel free to contact us.*

• Other cutting tools

The innovative nozzle for 3D printers with a diamond chip, 'DIANOZ', in FFF (Fused Filament Fabrication) technology ensures uniform material extrusion and smoothens the surface of components during printing. 【Ultra wear resistance for high-friction filaments】 - Capable of continuous extrusion of high-difficulty materials such as CFRP, GFRP, ceramics, and high-temperature filaments for extended periods without the need for nozzle replacement, enabling large parts and mass production. 【High print quality】 - The high thermal conductivity of diamond allows for uniform filament flow, and the ironing effect at the nozzle tip creates a smooth surface. 【Improved process reliability】 - Eliminates process interruptions due to nozzle replacement, prevents uneven layering caused by nozzle wear, and mitigates increased energy costs due to temperature drops. 【High cost-effectiveness】 - Reduces the number of nozzles purchased and labor costs associated with maintenance and replacement, decreasing extra energy costs related to temperature settings. *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The tool management system 'GTMS' developed by Gooling Japan is a tool issuance system that can fully support the optimization of tool management. In contrast to the tool usage amount, which is always a target for in-house cost reduction measures, indirect tool costs are hidden expenses managed by the tool management system. These costs are difficult to quantify, but they arise through processes such as purchasing and inventory costs, and insufficient management of these processes can be a significant factor leading to increased costs. This document includes actual examples from Europe where an annual cost reduction of approximately 7 million yen was achieved. It is a collection of case studies including user interviews from within Japan. [Contents] - What is the tool management system 'GTMS'? - Effects and case studies of GTMS implementation - Interview - Ishikawa Tool Polishing Co., Ltd. - *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

The "Cutting Tool Adoption Case Studies Vol. 2" is a booklet that collects examples of the adoption and improvement of Gühring cutting tools, focusing on work materials such as iron and stainless steel. This volume contains 20 case studies, and the types of tools and improvement points cover a wide range as listed below. 【Featured Themes】 　■ Extension of tool life 　■ Reduction of tool costs 　■ Improvement of processing efficiency 　■ Shortening of processing time 　■ Improvement of surface quality *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

The "Cutting Tool Case Studies Vol. 1" is a booklet that collects 16 case studies where the GUHRING sales department has engaged with users on-site to address their cutting-related concerns and challenges, leading to improvements and solutions. It introduces various examples, such as reducing drilling processing time and cost savings through extending tap lifespan. We hope it serves as a hint for solutions to your company's challenges. 【Featured Themes】 　■ Reduction of processing time 　■ Increased tool lifespan 　■ Improved chip management 　■ Tool consolidation 　■ Machining of difficult materials (nickel-based alloys) *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

Guhring has built a track record of implementation around the world with its intelligent tool management software 'GTMS', which is packed with know-how for tool management. The Guhring Tool Management Software, which is the brain behind high performance, also demonstrates significant power in the field of inspection tool management. It is crucial that the calibration of inspection tools is reliably conducted within the deadline, ensuring that the tools in use are always calibrated and capable of measuring accurate values. However, on-site, various challenges, such as those illustrated below, are faced. [Examples of Challenges] ■ Calibration oversights and shortages occur with ledger-based management ■ Uncertainty about whether the inspection tools in use are properly calibrated and traceable ■ Use of inspection tools that have exceeded their calibration deadline, resulting in defective product judgments at delivery points ■ Lack of transparency regarding the location of inspection tools and who is holding them, among others However, by using the solutions provided by GUHRING, the challenges mentioned above can be improved, bringing "certainty" and "transparency" to inspection tool management, as well as resulting in "time-saving effects" by eliminating the time lost searching for the whereabouts of inspection tools.

• Other cutting tools

The 'PCD Diver', an aluminum processing specialized end mill, expands the 'RF 100 Diver' series, which demonstrates outstanding chip removal performance and tool life in milling operations. The extremely long tool life is achieved with high-hardness PCD material. It features smooth milling processing and burr suppression due to its unique design. It allows for ramping operations of up to 60°. Since it can perform drilling, ramping, and grooving with a single tool, it reduces both the number of tools used and setup time. *For more details, please refer to the PDF document or feel free to contact us.*

• End Mills

High-efficiency carbide drill 'RT 100 InoxPro' specialized in the processing of stainless steel and titanium/titanium alloys, achieving both reduced processing time and extended tool life through high cutting conditions. Processing time can be reduced by up to half compared to conventional drills, lowering processing costs. Tool life can be extended by up to 60% compared to conventional drills, reducing tool costs. Improved web thinning provides high positioning performance. The concave cutting edge optimized for processing stainless steel and titanium alloys offers excellent wear resistance, and the generated chips are smoothly discharged. *For more details, please download the PDF or contact us.*

• drill

Guhring has accumulated a track record of implementation around the world with its intelligent tool management software 'GTMS', which is packed with know-how for tool management. The Guhring Tool Management Software, which is the brain behind high performance, can manage not only the inventory in GUHRING cabinets but also the tools stored in existing shelves that you have been using traditionally. Therefore, it can flexibly respond to needs that arise when considering improvements in tool management, such as: - To be honest, I don't feel the necessity to manage all items with an electronic control cabinet. - I want to manage inventory using only existing shelves / I want to use existing shelves in conjunction with GTMS cabinets. - I want to centrally manage inventory that cannot fit into the cabinet, such as large items or long materials. With GTMS, even with such implementation styles, you can break away from analog handwritten ledgers and digitize all inbound and outbound records, allowing for data accumulation, aggregation, and analysis. Of course, you can also utilize various features provided by the software, such as the automatic ordering function to prevent stockouts and recommendations for optimal inventory levels based on usage analysis.

• Other cutting tools
• Other production management systems
• cabinet

The carbide drill 'VB 100 P' for cast iron enables high-efficiency machining and good hole accuracy with its patented "2-flute + 4-flute combination cutting edge." The initial 2-flute design performs center machining with high positioning accuracy. The 4-flute design distributes the feed force, minimizing tool wear. It generates short chips and achieves machining under high cutting conditions. High feed machining contributes to reducing cycle time and machining costs.

• drill

The "FT 200 U" three-flute carbide drill enables high-efficiency machining at high feed rates. By using a three-flute design, the issue of chip evacuation is addressed by a newly designed flute shape that finely divides the chips. Additionally, maximizing the coolant hole diameter increases the flow rate, allowing for smooth chip removal. The increase in coolant flow also positively impacts cooling performance. Furthermore, the spiral point tip shape and the effect of the three flutes improve straightness, resulting in good hole accuracy.

• drill

The 'RT 100 FB' is a carbide flat drill with a tip angle of over 180°, ideal for drilling holes on inclined and curved surfaces. It is also perfect for applications such as pilot hole processing for gun drills and long drills, as well as interlap processing. It can drill holes on surfaces with a maximum incline of 45° or on curved surfaces. By eliminating the need for counterboring, it reduces processing costs. There is minimal burr formation at the hole exit, making it also suitable for processing cross holes. *For more details, please refer to the PDF document or feel free to contact us.*

• drill

There are endless concerns related to tools on-site. ● It takes time to find tools. ● The ledger shows they are available, but the actual items are out of stock, preventing processing. ● Even though we should use re-sharpened tools, we end up using new ones, and so on... The GTMS, which can be accurately managed digitally, features "easy operation," "information collection capabilities," "information analysis capabilities," and "information instruction capabilities." By improving tool management, we can enhance on-site efficiency, and the accurate data obtained from this will benefit management departments and executives. Additionally, there is a solution for the "management of inspection instruments," which many users struggle with, addressing both calibration management and inventory management issues all at once. 【Examples of Benefits】 ■ The storage locations for all tools are clear at a glance! ■ Easy and reliable check-in/check-out records with touch panel input! ■ Visualize optimal inventory levels to reduce tool costs! ■ Prevent stockouts with inventory notification and automatic ordering functions! ■ Contributes to increased on-site productivity and factory operating rates! ■ Manage calibration cycles of inspection instruments by serial number! And more... ★ Demonstrations can be conducted while operating the actual machine at the Gühring Nagoya factory. *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

The stainless steel processing expert 'InoxPro' has been added to the micro drill series, expanding the lineup. The cutting edge shape is optimized for stainless steel processing. It comes with a new coating, Perrox, using the HiPIMS method. There are four types of processing hole depths: 3xD, 6xD, 10xD, and 15xD. The type with oil holes is also ideal for deep hole processing. *For more details, please refer to the PDF document or feel free to contact us.

• drill

The micro drill 'Type N' is applicable to a wide range of work materials and is standardized for machining hole depths from 4xD to 20xD. It is available in diameters starting from Φ0.5. The machining hole depths come in six types: 4xD, 5xD, 7xD, 8xD, 15xD, and 20xD. It features a TiAlN coating that excels in heat resistance and oxidation resistance. The 20xD type is equipped with a new coating, Ferrox, using the HiPIMS method. *For more details, please refer to the PDF document or feel free to contact us.*

• drill

The long-selling micro drill model number 3899 for small diameter machining features standard programming with size increments of 1/100, making it ideal for machining general steel and cast iron. It is available in sizes starting from a minimum diameter of Φ0.01, with size increments of 1/100. It comes with a TiAlN coating that offers excellent heat resistance and oxidation resistance. *For more details, please refer to the PDF document or feel free to contact us.*

• drill

GUHRING's lineup has been expanded with the addition of the 'G-Mold' carbide unequal lead end mill <65U>, specialized for mold processing! It features a high-efficiency four-flute design with unequal leads. The hardness of the applicable workpiece material can reach up to 65 HRC. A wide range of machining methods is applicable, including groove processing up to HRC 65. *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

GUHRING's end mill product line has been expanded to include the 'G-Mold' finishing radius end mill <65FR>, specifically designed for mold processing! It is a finishing tool with six cutting edges. The corner R tolerance is ±0.02. It can be used on workpieces with a hardness of up to 65 HRC. Length options include regular and extra long. *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

The GUHRING end mill product line has been expanded to include the 'G-Mold' finishing end mill <65F>, which is specialized for mold processing! It is designed for finishing operations with six cutting edges. The hardness of the applicable workpiece material can be up to 65 HRC. Both regular and extra-long lengths are available. *For more details, please refer to the PDF document or feel free to contact us.*

• End Mills

GUHRING's end mill product line has been expanded with the addition of the high-precision finishing end mill 'G-Mold' <μ65F>, specialized for mold processing! It is optimal for high-precision finishing. The hardness of the applicable workpiece material can be up to 65 HRC. Available lengths include regular and long (3xD cutting length). *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

GUHRING's end mill product line has been expanded with the addition of the high-precision finishing end mill 'G-Mold' <μ48F>, specialized for mold processing! It is optimal for high-precision finishing. The hardness of the applicable workpiece material can be up to 48 HRC. Available lengths include regular and long (3xD cutting length). *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

GUHRING's end mill product line has been expanded with the addition of the 'G-Mold' high feed end mill <65HF>, specialized for mold processing! It is optimal for high feed (maximum fz) rough machining (with low cutting depth ap). The hardness of applicable work materials can reach up to 65 HRC. Available in diameter sizes from Φ1.0 to Φ16.0. Lengths range from regular to extra long. *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

GUHRING's end mill product line has been expanded with the addition of the 'G-Mold' torus end mill <55T>, specialized for mold processing! It is optimal for fine machining with a minimum diameter of Φ0.5. The hardness of the applicable workpiece material can go up to 55HRC. The corner R tolerance is ±0.01mm. We offer a wide variety of lengths from regular to long. *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

GUHRING's lineup has been expanded with the addition of the 'G-Mold' torus end mill <65T>, specialized for mold processing! The hardness of applicable work materials can reach up to 65HRC. The corner R tolerance is ±0.01mm. Available in diameter sizes from Φ1.0 to Φ12.0. Lengths are offered in both regular and long options. *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

GUHRING's end mill product line has been expanded with the addition of the 'G-Mold' high-precision torus end mill <μ65T>, specifically designed for mold processing! The corner R tolerance for the high-precision type is ±0.005mm. With a minimum diameter of Φ0.3, it is also ideal for micro-machining. The hardness of the applicable work materials can go up to 65HRC. We offer a wide variety of lengths, from short to long. *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

GUHRING's end mill product line has been expanded with the addition of the 'G-Mold' ball end mill <55B>, which is specialized for mold processing! It is optimal for micro machining with a minimum diameter of Φ0.5. The hardness of the applicable workpiece material can be up to 55HRC. The ball radius tolerance is ±0.01mm / ±0.02mm. It is available in two types: 2-flute and 4-flute. *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

GUHRING's range of end mills has been expanded with the addition of the 'G-Mold' ball end mill <65B>, specialized for mold processing! It is optimal for micro-machining with a minimum diameter of Φ0.5. The hardness of the applicable workpiece material can be up to 65 HRC. The ball radius tolerance is ±0.01mm / ±0.02mm. It is available in two types: 2-flute and 4-flute. *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

GUHRING's end mill product line has been expanded with the addition of the high-precision ball end mill 'G-Mold' <μ65B>, specialized for mold processing! The tolerance for the ball radius of the high-precision type is ±0.005mm. With a minimum diameter starting from Φ0.2, it is also ideal for micro-machining. The hardness of the applicable workpiece material can be up to 65HRC. We offer a wide variety of lengths, from short to long. *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

HSS general-purpose straight drill 'Type N' with S-type thinning. This is the long size available in a wide variety of options.

• drill

HSS general-purpose straight drill 'Type N' with S-shaped thinning. This is our semi-long size, available in a wide variety of options.

• drill