中部クリーン List of Products and Services

We would like to introduce a case study of the cutting oil filtration device from Chubu Clean. In the spindle of the machining center, the existing pump is used as is, and only the housing of the "JPX500" has been introduced. (A BF-50 filter is used to prevent clogging from pipe chips.) This product filters foreign substances in the tank using the built-in cartridge filter, removing chips and other debris. It helps reduce waste volume and contributes to cost reduction. [Case Study] ■ Used in the spindle of a machining center ■ Introduced product: JPX500 (housing only) Our company resolves issues with unique products, not limited to off-the-shelf items. If you are having trouble with floating oil, please consult us first. *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce a case study of the hydraulic fluid and lubrication oil filtration device "FCP-551" from Chubu Clean. This product is suitable for purifying large machinery and oils with high contamination levels. It typically comes with casters, but in this case, it has been installed as a fixed unit. 【Case Study】 ■ Installed on the hydraulic fluid of a cutting guillotine (fixed installation) ■ Product used: FCP-551 (filter used: Debus filter) Our company is committed to solving problems with unique products, not limited to off-the-shelf solutions. If you are having difficulties with floating oil, please consult us first. *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce a case study of the hydraulic oil and lubrication oil filtration device "FCP-3201" from Chubu Clean. This product can forcibly scrape out floating substances (such as scum) and other debris or cloth that may be mixed in the oil using the attached impeller, especially when there are many impurities present. (Special design) 【Case Study】 ■Product Introduced: FCP-3201 Our company resolves issues with unique products that are not limited to off-the-shelf solutions. If you are having difficulties with floating oil, please consult us first. *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce a case study of the hydraulic oil and lubrication oil filtration system from Chubu Clean. To collect the scum floating on the factory wastewater bit, we have introduced the "FCP-3201." This product uses a special non-woven fabric that has the same adsorption properties, strength, and water absorption as Mino washi paper. It can remove ultra-fine contaminants and carbon, which were difficult to eliminate with conventional filtration systems, achieving purification up to NAS Class 7. [Case Study] - Collection of scum floating on factory wastewater bit - Introduced product: FCP-3201 Our company will solve your problems with unique products, without being constrained by ready-made solutions. If you are having difficulties with floating oil, please consult us first. *For more details, please refer to the PDF materials or feel free to contact us.

We would like to introduce a case study of the introduction of Chubu Clean's hydraulic oil and lubrication oil filtration system. To recover floating oil from the tank of a machining center, we have implemented the "FCP-3101." This product purifies the hydraulic oil while removing both foreign substances and water, maintaining a condition equivalent to new oil at all times, and can be reused repeatedly, contributing to cost reduction. [Case Study] - Recovery of floating oil from the tank of a machining center - Introduced product: FCP-3101 Our company resolves issues with unique products, not limited to ready-made ones. If you are having difficulties with floating oil, please consult us first. *For more details, please refer to the PDF materials or feel free to contact us.

The filtration device "Super Clean Mate" JPX750 is a filtration system capable of purifying cutting oil both in online and offline modes. When cutting oil is used for an extended period, foreign substances and water can mix in, leading to oxidation. Continuing to use it in this state can cause problems, resulting in equipment failure or damage. This product purifies the operating oil while removing both foreign substances and water, maintaining a condition equivalent to fresh oil at all times. The filter uses a special non-woven fabric that has the same adsorption properties, strength, and water absorption as Mino washi (traditional Japanese paper). It removes ultra-fine contaminants and carbon, which were difficult to eliminate with conventional filtration devices, purifying to NAS grade 7. Compared to replacing with fresh oil, it reduces costs to about 1/5 to 1/10 of the expense. Furthermore, it can reduce the amount of waste generated, thereby lowering disposal costs. 【Features】 ■ Maintains a constant level of cleanliness ■ Cost reduction ■ Reduces the amount of waste *For more details, please refer to the catalog or feel free to contact us.

The "Super Clean Mate Series" is a filtration device that enables the purification of oils, from hydraulic oil to cutting oil, both online and offline. When hydraulic oil or cutting oil is used for an extended period, foreign substances and water can mix in, leading to oxidation. Continuing to use the oil in this state can cause problems, resulting in equipment failure or damage. This product purifies hydraulic oil while removing both foreign substances and water, maintaining a condition equivalent to new oil at all times. The filter uses a special non-woven fabric that has the same adsorption properties, strength, and water absorption as Mino washi (traditional Japanese paper). It removes ultra-fine contaminants and carbon, which are difficult to eliminate with conventional filtration devices, purifying to NAS 7 level. Compared to replacing with new oil, it reduces costs to 1/5 to 1/10 of the expense. Furthermore, it can reduce the amount of waste, thereby lowering disposal costs. 【Features】 ■ Maintains a constant level of cleanliness ■ Cost reduction ■ Reduces the amount of waste *For more details, please refer to the catalog or feel free to contact us.

The filtration device "Super Clean Mate" JPX250 is a filtration system that allows for the purification of cutting oil both in online and offline modes. Cutting oil, when used for extended periods, can become contaminated with foreign substances and water, leading to oxidation. Continuing to use it in this state can cause problems, resulting in equipment failure or damage. This product purifies the working oil while removing both foreign substances and water, maintaining a condition equivalent to fresh oil at all times. The filter uses a special non-woven fabric that has the same adsorption properties, strength, and water absorption as Mino washi (traditional Japanese paper). It removes ultra-fine contaminants and carbon, which were difficult to eliminate with conventional filtration devices, purifying to NAS grade 7. Compared to replacing with new oil, it reduces costs to 1/5 to 1/10 of the expense. Additionally, it can reduce the amount of waste generated, thereby lowering disposal costs. 【Features】 ■ Maintains a constant level of cleanliness ■ Cost reduction ■ Reduces the amount of waste *For more details, please refer to the catalog or feel free to contact us.

The "Super Clean Mate Series" is a filtration device that enables the purification of oils, from hydraulic fluids to cutting oils, both online and offline. When hydraulic fluids and cutting oils are used for extended periods, foreign substances and water can mix in, leading to oxidation. Continuing to use them in this state can cause problems, resulting in equipment failure or damage. This product purifies hydraulic fluids while removing both foreign substances and water, maintaining a condition equivalent to new oil at all times. The filter uses a special non-woven fabric that has the same adsorption properties, strength, and water absorption as Mino washi (traditional Japanese paper). It removes ultra-fine contaminants and carbon, which were difficult to eliminate with conventional filtration devices, purifying to NAS grade 7. Compared to replacing with new oil, it reduces costs to about 1/5 to 1/10 of the expense. Furthermore, it can reduce the amount of waste, thereby lowering disposal costs. 【Features】 ■ Maintains a constant level of cleanliness ■ Cost reduction ■ Reduces the amount of waste *For more details, please refer to the catalog or feel free to contact us.

The "Super Clean Mate Series" is a filtration device that enables the purification of oils, from hydraulic oil to cutting oil, both online and offline. When hydraulic oil and cutting oil are used for extended periods, foreign substances and water can mix in, leading to oxidation. Continuing to use the oil in this state can cause problems, resulting in equipment failures and damage. This product purifies hydraulic oil while removing both foreign substances and water, maintaining a condition equivalent to new oil at all times. The filter uses a special non-woven fabric that has the same adsorption properties, strength, and water absorption as Mino washi (traditional Japanese paper). It removes ultra-fine contaminants and carbon, which conventional filtration devices find difficult, purifying to NAS grade 7. Compared to replacing with new oil, it reduces costs to about 1/5 to 1/10 of the expense. Additionally, it can reduce the amount of waste, thereby lowering disposal costs. 【Features】 ■ Maintains a constant level of cleanliness ■ Cost reduction ■ Reduces the amount of waste *For more details, please refer to the catalog or feel free to contact us.

The "Super Clean Mate Series" is an efficient "sludge recovery device" that stirs up foreign substances accumulated inside the coolant tank of machine tools. Inside the coolant tank of machine tools, foreign substances oxidize and accumulate due to prolonged operation. Continuing to use it as is can lead to problems with pumps and cutting tools, causing equipment failure or damage. This product allows for the recovery of deposits and sludge by inserting a nozzle through a small gap, functioning even while the equipment is in operation, without moving the tank. The filter includes a wire mesh filter and a back filter, with the standard filter capable of handling particles down to 5 microns. There are five types of filters available, and a 1-micron filter can also be provided as an option. Compared to replacing with new oil, it reduces costs to about 1/5 to 1/10 of the expense. Additionally, it can reduce the amount of waste, thereby lowering disposal costs. [Features] ■ Maintains a constant level of cleanliness ■ Cost reduction ■ Reduces the amount of waste *For more details, please refer to the catalog or feel free to contact us.

The "Super Clean Mate Series" is an efficient "sludge recovery device" that stirs up foreign substances accumulated inside the coolant tank of machine tools. Inside the coolant tank of machine tools, foreign substances oxidize and accumulate due to prolonged operation. Continuing to use it as is can lead to problems with pumps and cutting tools, causing equipment failure or damage. This product allows for the collection of accumulated substances and sludge by inserting a nozzle through a small gap, all while the equipment is in operation, without needing to move the tank. The filters include a wire mesh filter and a back filter, capable of handling up to 5 microns as standard. There are five types of filters available, with an option to accommodate up to 1 micron. Compared to replacing with new oil, this offers a cost reduction of 1/5 to 1/10 of the expense. Additionally, it reduces the amount of waste, thereby lowering disposal costs. 【Features】 ■ Maintains a constant level of cleanliness ■ Cost reduction ■ Reduces the amount of waste *For more details, please refer to the catalog or feel free to contact us.

The "Super Clean Mate Series" is a "sludge recovery device" that can collect foreign substances accumulated inside the coolant tank of machine tools. Inside the coolant tank of machine tools, foreign substances oxidize and accumulate due to prolonged operation. Continuing to use it as is can lead to problems with pumps and cutting tools, causing equipment failures and damage. This product can function even while the equipment is operating, as it collects sludge through a small gap without changing the position of the tank. The filter includes a wire mesh filter and a back filter, capable of handling up to 5 microns as standard. There are also five types of filters available, with options that can handle down to 1 micron. Compared to replacing with new oil, this offers a cost reduction of 1/5 to 1/10 of the expense. Furthermore, it can reduce the amount of waste, thereby lowering disposal costs. 【Features】 ■ Maintains a constant level of cleanliness ■ Cost reduction ■ Reduces the amount of waste *For more details, please refer to the catalog or feel free to contact us.

The "Super Clean Mate Series" is a "sludge recovery device" that can collect foreign substances accumulated inside the coolant tank of machine tools. Inside the coolant tank of machine tools, foreign substances oxidize and accumulate due to prolonged operation. Continuing to use it as is can lead to problems with pumps and cutting tools, causing equipment failure or damage. This product can function even while the equipment is operating, as it collects sludge through a small gap without changing the position of the tank. The filter includes a wire mesh filter and a back filter, capable of handling up to 5 microns as standard. There are five types of filters available, with an option for 1 micron as well. Compared to replacing with new oil, it reduces costs to about 1/5 to 1/10 of the expense. Additionally, it can reduce the amount of waste, thereby lowering disposal costs. 【Features】 ■ Maintains a constant level of cleanliness ■ Cost reduction ■ Reduces the amount of waste *For more details, please refer to the catalog or feel free to contact us.

The "Super Clean Mate Series" is a "sludge recovery device" that can collect foreign substances accumulated inside the coolant tank of machine tools. Inside the coolant tank of machine tools, foreign substances oxidize and accumulate due to prolonged operation. Continuing to use it as is can lead to problems with pumps and cutting tools, causing equipment failure or damage. This product can function even while the equipment is operating, as it collects sludge through a small gap without changing the position of the tank. The filter includes a wire mesh filter and a back filter, capable of handling up to 5 microns as standard. There are five types of filters available, and an option for 1 micron is also possible. Compared to replacing with new oil, it reduces costs to 1/5 to 1/10 of the expense. Additionally, it can reduce the amount of waste, thereby lowering disposal costs. 【Features】 ■ Maintains a constant level of cleanliness ■ Cost reduction ■ Reduces the amount of waste *For more details, please refer to the catalog or feel free to contact us.

The "Super Clean Mate Series" is a filtration device that enables the purification of oils, from hydraulic oil to cutting oil, both online and offline. When hydraulic oil or cutting oil is used for an extended period, foreign substances and water can mix in, leading to oxidation. Continuing to use it in this state can cause problems, resulting in equipment failure or damage. This product purifies hydraulic oil while removing both foreign substances and water, maintaining a condition equivalent to fresh oil at all times. The filter uses a special non-woven fabric that has the same adsorption properties, strength, and water absorption as Mino washi (traditional Japanese paper). It removes ultra-fine contaminants and carbon, which are difficult to eliminate with conventional filtration devices, purifying to NAS grade 7. Compared to replacing with fresh oil, it reduces costs to about 1/5 to 1/10 of the expense. Additionally, it can reduce the amount of waste generated, thereby lowering disposal costs. 【Features】 ■ Maintains a constant level of cleanliness ■ Cost reduction ■ Reduces the amount of waste *For more details, please refer to the catalog or feel free to contact us.

At Chubu Clean Co., Ltd., we provide various services related to environmental machinery, including coolant automatic supply systems, floating oil recovery systems, sludge recovery systems, various filtration devices, and factory wastewater treatment equipment, contributing to factory automation, cost reduction, and environmental improvement. We offer total engineering from production lines to wastewater treatment. By merging production technology with environmental technology, we achieve the long life of cutting fluids and the reduction of wastewater volume. [For example] ○ Coolant automatic dilution supply system → Automating liquid replenishment to reduce fixed costs and environmental improvement expenses. ○ Floating oil recovery system → Extending the life of cutting fluids and cleaning liquids from each machine through floating oil recovery and oil-water separation. ○ Sludge recovery system → Inserting nozzles through gaps in tanks to remove accumulated foreign substances, preventing contamination and rust deterioration. ○ Filtration devices → Incorporating them inline prevents pump lifespan and processing accuracy deterioration, significantly reducing the need for regular major cleaning. For more details, please contact us or download the catalog.

Chubu Clean Co., Ltd. is engaged in residential renovations, industrial chemicals, machinery maintenance, wastewater treatment equipment, wastewater treatment facilities, and wastewater reduction. In the industrial machinery business, we handle products such as the "Automatic Coolant Supply System" that can accommodate water-soluble cutting oils and the "Floating Oil Recovery Device" that collects oil floating on the water surface. In the materials, we introduce examples of environmental maintenance projects, civil engineering construction examples, and water supply construction examples, using photographs. 【Business Activities】 ■ Industrial Chemicals Sales ■ Environmental Maintenance ■ Industrial Machinery ■ Construction and Lifestyle Related Business *For more details, please refer to the PDF materials or feel free to contact us.

The "RCC300-SX2" filtration device from Chubu Clean is a high-precision vertical type backwash filtration system that achieves both filtration and floating oil recovery in one unit. It is characterized by its wide applicability to machining centers, grinding machines, cleaning machines, and various specialized machines. It reduces the hassle of filter replacement and contributes to lower running costs. Additionally, a horizontal type "RCC350-MX2" is also available. By recovering sliding oil and hydraulic oil, it effectively reduces decay and unpleasant odors. 【Features】 - The filter medium is made of ceramic filter, ensuring reliability and improved precision. - It is possible to backwash the filter using air. - Reduces filter clogging and keeps running costs down. - The ceramic filter is reusable, generating no waste. - Foreign substances after backwashing are separated using tanks, reducing industrial waste. - By recovering oil containing fine chips, it improves cutting precision and reduces processing defects. *For more details, please refer to the PDF document or feel free to contact us.