広和 List of Products and Services

- The grease exchange is simply done by replacing the 400g cartridge. - Since it is battery-operated, no electrical wiring is required, making installation easy. - With a maximum discharge pressure of 2.94 MPa, reliable lubrication is possible. - The lubrication interval can be set using the built-in timer. - The operating time can be set from 1 to 7 seconds, allowing for adjustment of the lubrication amount. - As it is motor-driven by batteries, the discharge pressure remains constant until the end. - By using the separately sold distribution valve KU-4N-2, the outlet can be made into two ports.

• Other pumps

By centralizing manual lubrication to multiple locations with a single pump, the time-consuming lubrication process can be significantly shortened. We have all the necessary components for centralized lubrication, and we offer models for 4 outlets and 6 outlets. The grease pump is a manual type that can use a 400g cartridge. Assembly and installation can be easily done by anyone.

• Piping Materials

We would like to introduce a case study of the "Grease Checker" handled by Hirokazu Corporation. In a dual-line system, even if there is damage to the piping between the distribution valve and the bearing, the distribution valve operates normally, making it difficult to detect abnormalities. By installing the Grease Checker close to the bearing, the grease supply status to the bearing can be easily confirmed at a glance. [Case Overview] ■ Introduced Product: Grease Checker ■ After Installation - The Grease Checker was installed close to the bearing, and the grease pump was operated. - The indicator pops out for normal areas, while it remains down for abnormal areas, making it easy to identify the problematic locations. *For more details, please refer to the PDF document or feel free to contact us.

• Lubricants
• others

We would like to introduce a case study of the "Wired Monitoring System" handled by Hirokazu Co., Ltd. Inspecting multiple distribution valves scattered at high locations of large transport equipment such as unloaders and stacker reclaimers is dangerous and labor-intensive. Most distribution valves are installed at the top of the equipment, making it impossible to check the indicator rods due to rust and dirt. Therefore, all distribution valves were replaced with limit switch-equipped distribution valves, and the wiring for the limit switches was consolidated into a monitoring box to display the number of times the indicator rods operate. The counter is battery-operated, eliminating the need to draw a new power supply. 【Case Overview】 ■ Introduced Product: Wired Monitoring System ■ Benefits - Early detection of issues through efficient lubrication monitoring - Prevention of accidents before they occur - Leads to labor savings *For more details, please refer to the PDF document or feel free to contact us.

• Lubricants
• others

The centralized lubrication device "Single Line System / Dual Line System" is designed to supply lubricants in a timely and appropriate manner, ensuring the stable operation of machinery and equipment. Proper lubrication management of machinery not only contributes to stable operation but also extends lifespan, reduces energy consumption, minimizes hazardous work and environmental impact, and streamlines maintenance tasks. As a specialized manufacturer of lubrication devices, we possess the know-how and products to propose suitable lubrication solutions for various customers' machinery. 【Features】 <Single Line System> ■ Quickly detects oil supply abnormalities ■ Suitable for small to medium-sized applications ■ All oil supply lines are composed of a single pipe ■ The supply amount of lubricant can be set for each lubrication point by selecting the distribution valve piston ■ Classified into six types based on drive method, scale of machinery, and lubricated mechanical elements, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Lubricants
• others

We would like to introduce the centralized lubrication systems and forced circulation lubrication systems that we handle. We offer a single line system, where the oil supply line (from pump to distribution valve to bearing) consists of a single pipe, as well as a dual line system, which is composed of two pipes from the pump to the distribution valve. Please feel free to contact us when introducing or updating lubrication systems. 【Featured Products】 ■ Single Line System ■ Dual Line System ■ Electric Lubrication Pump ■ Lubrication Monitoring Items ■ Filling Pump (KGP Series) *For more details, please refer to the PDF materials or feel free to contact us.

• Lubricants

This document is an introductory guide to the "Dual Line Distribution Valve Wireless Monitoring System." The "Dual Line System" is a representative system among lubrication methods, and by using it in conjunction with bearing monitoring items, it enables further system upgrades for centralized lubrication. We provide a detailed explanation of "lubrication management for equipment," as well as "mechanisms" and "product specifications," using photos and diagrams. We encourage you to read it. [Contents] ■ Lubrication management for equipment ■ The necessity of condition monitoring for the dual line system ■ Mechanism of the wireless monitoring system ■ Monitoring screen ■ Product specifications ■ Before considering implementation... Checking communication status *For more details, please refer to the PDF document or feel free to contact us.

• Lubricants
• others

A centralized lubrication system is a device that supplies lubricants in a timely and appropriate amount based on lubrication technology (tribology) to ensure the stable operation of machinery and equipment. 【Benefits of Implementation】 ■ Savings on equipment downtime (increased productivity) ■ Optimization of oil supply amount (savings on lubricant costs) ■ Labor saving ■ Energy savings through smoother equipment operation ■ Extension of equipment and bearing lifespan ■ Prevention of missed lubrication points ■ Prevention of hazardous work ■ Prevention of foreign matter contamination in lubricants ■ Improvement in product quality and savings on consumables 【Contents】 ■ Introduction ■ Benefits of Implementation ■ Steps for Improving Lubrication Work Methods ■ Components ■ Mechanism and Features of the System *For more details, please refer to the PDF document or feel free to contact us.

• Lubricants
• others

This document is an introductory guide to Kowa's "Oil Air." "Oil Air lubrication" is a system that utilizes a continuous flow of compressed air to continuously supply a small amount of lubricating oil. It provides a detailed explanation of topics such as "Characteristics of Oil Air Lubrication," "Lubrication Methods of Oil Air," and "Equipment where Oil Air is Active," using photos and diagrams. Please take a moment to read it. [Contents] ■ About Oil Air Lubrication ■ Characteristics of Oil Air Lubrication ■ Comparison with Oil Mist Lubrication ■ Lubrication Methods of Oil Air *For more details, please refer to the PDF document or feel free to contact us.

• Lubricants
• others

★★ KOWA Cyclone Clean System 2-Piece Mattress Cleaning and Drying Device ★★ ★★★ Cyclone Clean System CCS-D02 Model ★★★ Disinfection alone cannot remove dirt and odors! A new idea of "washing mattresses thoroughly"! ◆ Unique Cleaning Method ◆ Using the impact force of water and centrifugal force, we achieve deep cleaning that penetrates every detail of the mattress. Cleaning water and rinsing water are evenly sprayed across the entire mattress, efficiently cleaning not only the center, which is prone to odors, but also the interior of the mattress. Since we effectively utilize the power of water, there is no need for gas or other heat sources, making it low-cost. ◆ Easy Setup ◆ The height of the mattress insertion opening is designed for easy lifting, allowing you to set it up without having to stand the heavy mattress up. The fixing is also simple with a one-touch mechanism, so anyone can operate it. ★ Unique Deodorization System ◆ Approaching odors with a double action of deodorizing detergent and deodorizer! This reduces the hassle of pre-treatment and lessens the burden on the operator. It also leads to improved finishing quality and reduced waste! ◆ High Drying Efficiency ◆ Our unique drying system effectively dries the mattress by applying warm air while dewatering! ☆

• Other cleaning machines

We will introduce a case where the labor-intensive task of greasing roll chocks has been easily automated using an "Automatic Grease Filling System." The task of filling grease into roll chocks with a grease gun nozzle is time-consuming for maintenance personnel, and since the grease is filled based on human judgment, the actual amount of grease used varies each time, making it difficult to manage. This system uses our high-capacity drum-connected electric grease pump to fill the necessary grease into the roll chocks through a distribution valve. Customers calculate the required amount of grease for the chocks, and based on that calculation, we select the piston size for the distribution valve. The system then performs lubrication at each location until the required amount of grease is filled, controlled by the operation count of the distribution valve. [Challenges] ■ The task of filling grease into roll chocks with a grease gun nozzle consumes a lot of time for workers. ■ Since the grease is filled based on human judgment, the actual amount of grease used varies each time and is difficult to manage. *For more details, please refer to the PDF document or feel free to contact us.

• Filling and bottling machines

This document is an introductory guide to the flow control device "High Precision Oil Flow KOF Series." This product is well-suited for equipment and facilities in the paper and pulp industry, allowing for precise oil flow settings according to the size of roll bearings, starting from the dryer part of the paper machine. We provide detailed explanations of examples of implementation, structure and principles, and maintenance, using photos and diagrams. We encourage you to read it. [Contents] ■ Product Overview ■ Implementation Examples ■ Structure and Principles ■ Maintenance *For more details, please refer to the PDF document or feel free to contact us.

• Flow Control
• Flow Meter
• Other measurement, recording and measuring instruments

★★★ KOWA Cyclone Clean System 4-Sheet Mattress Cleaning Device ★★★ ★★★ Cyclone Clean System CCS-04 Model ★★★ Disinfection alone cannot remove dirt and odors! A new idea of "washing mattresses thoroughly"! ◆ Unique Cleaning Method ◆ Using the impact force of water collisions and centrifugal force, we achieve deep cleaning throughout the mattress. Cleaning water and rinse water are evenly sprayed over the entire mattress, efficiently cleaning not only the center, which is prone to odors, but also the interior of the mattress. Since we effectively utilize the power of water, there is no need for gas or other heat sources, resulting in low costs. ◆ Easy Setup ◆ The height of the mattress insertion opening is designed to be approximately 65 cm, allowing for easy setup without having to lift or stand heavy mattresses high. Fixing is also simple, making it accessible for anyone to operate. ★ Unique Deodorization System ◆ Approaching odors with a double action of deodorizing detergent and deodorizer! Reducing the hassle of pre-treatment, it lessens the burden on operators. It also leads to improved finishing quality and reduced waste!

• Other cleaning machines

- Spray Valve [KP-0・KP-2] Allows for the application of lubricants to tire rollers used in various open gears and swivel parts. - Y-Shaped Strainer [YST3/8・YST/1/2] A Y-shaped strainer for lubrication piping with a working pressure of 20.6 MPa. You can choose the thread diameter and mesh size. - High-Pressure Ball Valve [HT0210 Series] Available in four thread diameters. With a working pressure of 20.6 MPa, it can be used in main pipes such as pump outlets. - Two-Way Check Valve for Grease [TWCV3/8] Please use it in areas with significant elevation differences during piping.

• valve

The production of oil supply devices and various units requires not only know-how related to can-making, piping assembly, and pickling, but also extensive knowledge about the component devices of the units, such as oil pumps, oil coolers, oil filters, instrumentation related to temperature, pressure, differential pressure, and oil level management, as well as valve-related components like pressure control valves and temperature control valves. Additionally, various know-how is necessary throughout the design, manufacturing, and inspection processes. Our company has already produced over 10,000 oil supply devices and hydraulic power units, among other unit products, accumulating a wealth of know-how and experience. In particular, we have numerous achievements in forced circulation oil supply devices (LO) as lubrication units for major equipment in various industries, focusing on chemical plants, steelmaking, papermaking, and power generation. We have also applied that know-how to the production of units using fluids such as water and gas, as well as units for applications other than lubrication. We have a track record of complying with various international standards. If you provide us with the necessary conditions for the production of oil supply devices and various units, we will respond after consultation. We also offer a series of forced circulation oil supply devices, so please refer to our dedicated catalog.

• Hydraulic Equipment

We would like to introduce four types of items as "Lubrication Monitoring Items." 1. Distribution Valve Monitoring System: This system allows for centralized management of the operational status of widely distributed distribution valves. The monitoring box is battery-operated and can be customized according to the number of distribution valves. 2. Counter-equipped Distribution Valve: By visually checking the counter attached to the distribution valve, you can easily monitor for abnormalities in the piping line and bearings after the distribution valve. The counter is mechanical, so no power supply is required. 3. Grease Checker: By installing it close to the bearing, you can visually check for troubles between the distribution valve and the bearing. Installation is easy, and it ensures the reliability of inspection work. 4. Grease Flow: By installing it close to the bearing, you can centrally manage troubles between the distribution valve and the bearing using the monitoring box. *Please note that each product has specific installation conditions and constraints depending on the lubrication system, so please refer to the catalog or feel free to contact us for more details. ★ We will be exhibiting at "Maintenance & Resilience TOKYO." For details, please see the basic information.

• Positive Displacement Pump

This catalog introduces the forced circulation lubrication system "K Series," designed for large, ultra-high-speed rotating machinery that operates under high loads, using oil as a lubricant. It features a range of products, starting with "K1," which has a base unit configuration and does not include an oil tank, as well as "K2" and "K3," which effectively supply oil to machinery with low heat generation. Please use this for selecting products. [Featured Products (Excerpt)] ■K1 ■K2 ■K3 ■K4A *For more details, please refer to the PDF document or feel free to contact us.

• Lubricants
• others

This catalog introduces the "Dual Line Central Lubrication System," which uses grease as a lubricant and operates the distribution valve through two pipes in a parallel operation system. It includes a wealth of information about products such as central lubrication systems, oil supply pumps, and switching valves. Specifications and features are also provided, so please use this information to assist in product selection. [Contents (excerpt)] ■ Central Lubrication System ■ Oil Supply Pump ■ Switching Valve ■ Distribution Valve ■ Grease Filling Pump *For more details, please refer to the PDF document or feel free to contact us.

• Lubricants
• others

This catalog mainly introduces the "Single Line Central Lubrication System," which uses grease as a lubricant and supplies the lubricant to the distribution valve through a single pipe in a progressive action system. It includes a wealth of information about the product, such as system configuration, equipment configuration, drive methods, and lubrication methods. Please use this for selecting products. [Contents (excerpt)] ■ System configuration ■ Equipment configuration ■ Lubrication method ■ Lubrication pump ■ Distribution valve *For more details, please refer to the PDF document or feel free to contact us.

• Lubricants
• others

The "Oil/Air Central Lubrication System" is a system that uses compressed air flow as a lubricant, allowing for the continuous supply of a small amount of oil. Due to the supply air pressure, the internal pressure of the bearings is higher than the external pressure, preventing the intrusion of dirt and water. In the case of a dual line system, unnecessary lubrication points can be easily terminated by simply plugging the oil/air outlet of the mixing valve. Additionally, since the lubricant is supplied by compressed air, there are no restrictions on the installation direction of the piping. 【Features】 ■ Low oil consumption (supplies only the minimum necessary oil) ■ Continuous supply of oil to lubrication points ■ Provides a sealing effect for bearings ■ The amount of oil supplied to individual lubrication points can be easily adjusted on-site (in the case of dual line systems) *For more details, please refer to the PDF document or feel free to contact us.

• Lubricants
• others

We offer a wide range of products tailored to various applications and the scale of centralized lubrication, including options for dual-line and single-line systems, manual lifters, suspended types, and a variety of discharge volumes. 【Features】 ● Options available for dual-line and single-line systems. ● Discharge volume can be selected from 11 different types. ● Drum replacement can be done using either a manual lifter or a suspended type. ● Motor-driven for precise discharge. ● Equipped with a plunger pump that is resistant to air and foreign object entrapment. ● Includes a spreading blade to reduce grease residue. ● Drum cans can be easily replaced as there is no follower plate.

• Positive Displacement Pump

【Features】 ● Made of aluminum die-cast, it is lightweight. ● Maximum operating pressure is 14.7 MPa. ● Comes with a pointer for easy oil level checking. ● Available in four outlet configurations: 4, 6, 8, and 12 outlets. It can also accommodate odd numbers of outlets when using dedicated auxiliary fittings.

• valve

【Features】 ● Parallel installation type that draws in two pipes. ● Distributes lubricant sent from the pump in a fixed quantity to each bearing. ● Flow rate can be adjusted for each outlet within a certain range using adjustment screws. ● Easily expandable or reducible according to the increase or decrease of lubrication points. ■ KS Type (Single Discharge Type) Discharges grease from one location on both sides of the main piston. ■ KW Type (Double Discharge Type) Discharges grease from separate outlets on both sides of the main piston. Please use in combination with a dual-line lubrication pump. Limit switches for confirming the operation of the distribution valve, counters, and dustproof distribution valve covers are also available.

• valve

When refilling grease into the grease pump tank, always use a dedicated filling pump for grease. Refilling grease from the top of the tank can cause air to enter and lead to contamination with foreign substances, resulting in problems. The filling pump can be easily attached and detached from the grease pump's filling port using a quick coupling. *While it is generally limited to our products, we also accept adapters for pumps from other manufacturers. For drum cans, a stirring blade method without a follower plate is adopted. This allows for minimal residual grease and makes it easy to replace the drum can.

• Positive Displacement Pump

【Features】 ● Compact and lightweight. ● Maximum discharge pressure up to 14.7 MPa (for grease). ● Tank shapes available in refillable and 400g cartridge types. ● Usable for single line applications for grease and oil. Please use the dedicated filling pump KGP-420 for filling grease.

• Positive Displacement Pump

【Features】 ● High-pressure discharge Maximum operating pressure supports up to 20.6 MPa (when using grease). ● Choice of tank shape You can select from refillable tanks (2L acrylic tank, 3L and 6L steel tanks) suitable for 400g cartridges, depending on your application. *When using a refillable tank, please use the dedicated filling pump KSP-420. ● Available for single line and dual line applications ● Available for grease and oil

• Positive Displacement Pump

The KSP-33 model small electric grease pump is a compact and highly functional grease pump for single-line use. When used in conjunction with a distribution valve, it enables greasing at multiple locations. 【Features】 ● High-pressure discharge It can handle a maximum operating pressure of up to 20.6 MPa (when using grease). ● Equipped with two discharge outlets One pump can supply grease to two systems. It is also possible to combine the two outlets into one. ● Selection of discharge volume The discharge volume can be selected from three different options. ● Selection of tank shape Various lineups are available, including refillable tanks (2L acrylic tank, 6L steel tank) for 400g cartridges, with or without level switches. *When using a refillable tank, please use the dedicated filling pump KGP-420. Additionally, we can accommodate custom manufacturing requests, so please feel free to consult with us.

• Positive Displacement Pump

The "Grease Checker KGC-01" is a product that, when installed on bearings or nearby piping, allows the indicator to pop out if lubrication is good, making it easy to see the lubrication status at a glance. Anyone can easily check the lubrication, which improves work efficiency. It helps avoid problems caused by insufficient lubrication, such as bearing seizure. In emergencies, it is possible to temporarily grease through the grease nipple. Additionally, for sites with many lubrication points or where access to distribution valves is difficult, we also offer the "Lubrication Monitoring System," which allows for centralized monitoring of distribution valve operation via an LCD counter. *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Underwater Bottom Cleaning Robot" can clean without contaminating the water. The main camera allows for wide-area visibility with vertical movement and horizontal rotation. The sub-camera can confirm cleaning, while the main camera can be used for inspection. Additionally, the dimmable LED lighting ensures high transparency underwater, providing wide-area visibility. The underwater cable is highly durable and buoyant, enabling extensive cleaning. 【Features】 ■ Can clean without contaminating the water ■ Improved operability with twin cameras ■ Equipped with a camera that has up to 40x zoom ■ Pressure-resistant waterproof performance at depths of 40m ■ Capable of cleaning steep inclines *For more details, please refer to the PDF document or feel free to contact us.

• Other cleaning tools
• Other industrial robots

This product is an underwater camera system that can move freely. It features remote control with endless horizontal 360° and vertical 90°. Equipped with a high-intensity lamp. The zoom function allows for clear visibility of distant targets. 【Features】 ■ Hanging type with pan-tilt-zoom ■ Camera moves freely ■ Equipped with a high-intensity lamp ■ Includes zoom function *For more details, please refer to the PDF document or feel free to contact us.

• Color camera

The "150m ROV" is an underwater high-definition camera robot that demonstrates its power in long-distance exploration under tidal currents. It is equipped with a high-resolution 2.38 million pixel camera. The zoom lens features an optical 10x and digital 12x ultra-wide-angle lens. The camera can capture a wide range of 180° left and right, and 180° up and down through remote control operation. 【Features】 ■ Equipped with a high-definition 2.38 million pixel high-resolution camera ■ Lens features optical 10x and digital 12x zoom capabilities ■ Remote control operation ■ Includes depth and heading hold functions as an autopilot feature ■ Stable vehicle configuration and joystick controller for easy operation *For more details, please refer to the PDF document or feel free to contact us.

• Color camera

The "MARINE EYE-mini" is a compact underwater camera system that can easily observe narrow and tight spaces. It is resistant to continuous micro-vibrations and shocks due to its special manufacturing process, and it is maintenance-free. With its ultra-wide-angle lens, it ensures a broad field of view and can be mounted in various locations using support brackets. 【Features】 ■ Easily observe narrow and tight spaces with a diameter of 25mm and a length of 45.5mm ■ Maintenance-free ■ Waterproof structure with no worries about water ingress ■ High-resolution low-light camera that brightly captures dark underwater environments ■ High versatility suitable for both saltwater and freshwater *For more details, please refer to the PDF document or feel free to contact us.

• Color camera

The "LED-MARINE EYE" is a compact underwater camera system equipped with a high-brightness LED light. It is resistant to continuous micro-vibrations and shocks due to its special manufacturing process, and it is maintenance-free. With an ultra-wide-angle lens, it ensures a broad field of view and can be installed in various locations using support brackets. It has high versatility for both saltwater and freshwater environments, and it can easily observe narrow spaces. 【Features】 ■ Equipped with high-brightness LED light ■ Maintenance-free ■ Waterproof structure with no concerns about water ingress ■ High-resolution low-light camera that brightly captures dark underwater scenes ■ Easy observation of narrow spaces *For more details, please refer to the PDF document or feel free to contact us.

• Color camera

The "HD-SK4S-100" is a high-definition compact pan-tilt underwater camera that allows for high-quality shooting with 360° horizontal and 90° vertical freedom. It is waterproof up to a depth of 100 meters. Additionally, it is equipped with LED lights that are linked to the camera's up and down movements, enabling clear shooting even in dark or dim environments. It can be used for a wide range of applications, from observing fish in fixed nets and aquaculture tanks, checking for fish diseases, fry, and leftover feed, to equipment inspections. 【Features】 ■ Camera operation allows for a full 360° horizontal rotation (endless) and 90° vertical movement ■ Waterproof up to 100m ■ Equipped with LED lights linked to the camera's up and down movements ■ Extremely compact body and controller for ease of use ■ High-quality high-definition specifications *For more details, please refer to the PDF document or feel free to contact us.

• Color camera

The "HD-MARINE EYE" is a compact high-definition underwater camera that allows for clear imaging even in low-light environments. It can be used for observing fish in fixed nets and aquaculture cages, checking feeding behavior, and monitoring net conditions. 【Features】 ■ High definition ■ Waterproof up to 50m ■ Compact and lightweight with an outer diameter of φ51mm ■ High sensitivity for clear imaging in dark environments *For more details, please refer to the PDF document or feel free to contact us.

• Color camera

The "MODEL 881A" is a super compact variable frequency profiling sonar. It is capable of precisely measuring the cross-sectional shape of any space. The measurement distance can be set arbitrarily within the range of 1m to 100m, and the exploration range can be adjusted from a maximum of 360° to 0° (in increments of 0.3°). Control is done via a laptop, taking up minimal space, and data recording and editing on the hard disk is easy. 【Features】 ■ Super compact and lightweight ■ Frequency can be finely adjusted (600kHz to 1.1MHz in increments of 5kHz) ■ Easy operation with Windows-compatible software ■ Underwater measurement, scour investigation, river pier, and breakwater scour *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "MODEL 881A" is a super compact variable frequency imaging sonar. By changing the ultrasonic frequency according to the underwater target situation, it displays precise images. Additionally, it allows for measurement of the size of objects using a cursor between two points, enabling confirmation of targets and searches. Control is done via a laptop, making it space-efficient, and long-term recording and editing are easy. 【Features】 ■ Super compact and lightweight ■ Frequency can be finely adjusted (280kHz to 1.1MHz in 5kHz increments) ■ Easy operation with Windows-compatible software ■ Confirmation of targets and searches is possible ■ Long-term recording and editing are also simple *For more details, please refer to the PDF document or feel free to contact us.

• Other image-related equipment

The KSP850 is a direct connection type for pails and is compatible with high-viscosity grease. In addition to its compact design, it features a self-weight descending follower plate. The pump lowers according to the remaining grease, enhancing the vacuum level inside the drum and accommodating high-viscosity grease. 【Features】 ■ Compatible with NLGI No.0 to No.3 grease ■ Compact design ■ Pail replacement is done via an elevator system using rack and pinion ■ Utilizes a self-weight descending follower plate ■ Equipped with a mixing blade designed for high-viscosity grease *For more details, please refer to the PDF materials or feel free to contact us.

• Hydraulic Equipment
• Other pumps
• others

The "KSP820 Series" is an electric grease pump that enhances safety and convenience. It is a pump directly connected to a pail, which significantly reduces the contamination of grease with foreign substances. The stirring blades ensure that grease is consumed efficiently. Additionally, there is no cumbersome follower plate during pail replacement, allowing for easy swapping of pails. 【Features】 - Adoption of a double plunger pump greatly reduces troubles caused by foreign substances and air. - Direct connection to the pail eliminates the hassle of refilling from a filling pump. - A manual lifter that raises and lowers the pump improves safety and convenience. - The discharge volume can be selected from seven models according to application. - Vertical and horizontal motor placements are available, allowing for selection based on installation space. - Compatible with various lubrication systems (single line, dual line). - Patent and utility model registered. *For more details, please refer to the PDF document or feel free to contact us.

• Hydraulic Equipment
• Other pumps
• others

The "KS-C・KW-C Series" is a distribution valve for dual lines with a counter. It notifies you of the lubrication status through counting, making inspection work easy. With a mechanical structure, it boasts excellent durability and can be installed in any orientation. 【Features】 ■ Alerts you to blockages in the piping ■ No risk due to mechanical mechanism ■ Can identify areas of poor lubrication due to counting anomalies ■ Space-saving type that does not require much installation space ■ Utility model registered ■ Design registered *For more details, please refer to the PDF materials or feel free to contact us.

• Hydraulic Equipment
• others

The "Junpet KJP Type" is a battery-operated single-point grease dispenser that requires no piping or wiring, and minimizes grease waste through IC control, allowing for precise lubrication. With a maximum discharge pressure of 2.94 MPa, it ensures reliable oil supply. The built-in timer allows for setting the lubrication interval, and the operating time can be selected between 1 to 7 seconds, enabling the adjustment of grease quantity. It is a cartridge type that is convenient for grease replenishment and prevents contamination from foreign substances like dust. A version compatible with 400g grease cartridges can also be produced. 【Features】 ■ High-pressure type 3MPa / Dust and drip-proof type ■ Lubrication interval can be set with the built-in timer (1, 2, 4, 8 hours) ■ Operating time can be set between 1 to 7 seconds ■ Microcomputer control allows for the precise amount of grease to be dispensed at regular intervals ■ Minimal variation in grease quantity during initial and later stages of installation ■ If direct installation is not possible, it can be installed using piping (approximately φ8, 2m) *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "KSP-821GH Series" is an electric grease gun for pails that allows for grease dispensing anywhere, as long as there is power, without the need for air. Thanks to the electric plunger pump, it enables precise dispensing at any time. The mixing blades evenly reduce the grease, which is effective in minimizing the remaining amount. There is no follower plate, making it easy to replace the pail. 【Features】 ■ Electric drive type (compatible with AC100V/200V) ■ Utilizes an electric plunger pump ■ Mechanism that sucks while mixing, reducing grease residue ■ Two inspection windows to check the remaining grease *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "KBP Series" is a handheld, electric cordless grease gun that allows for lubrication in any location. You can choose between a one-touch cartridge type for easy grease replacement and a refillable type. 【Features】 ■ Equipped with a lithium-ion battery for repeated use ■ Battery level can be checked with a lamp ■ Convenient handheld design allows for work in any location ■ Easy to use for greasing ■ Available in two types: cartridge exchange type and refillable type ■ High-pressure discharge type also available ■ Total weight: 2.3 kg *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "Marine Systems Department" boasts a long history of achievements in marine research and surveys, creating numerous marine robots through innovative design thinking and excellent technical skills. We consistently handle everything from the design, manufacturing, and investigation of equipment used in the unique marine environment to the overall system. Additionally, our fiber-optic ROV "PICASSO" has been featured in the scientific magazine Newton. 【Business Activities】 ■ Development, design, and manufacturing sales of survey equipment related to marine research *For more details, please refer to our catalog or feel free to contact us.

• Environmental Analysis
• Other contract services
• Machine elements

Originally, the underwater camera TV robot "ROV150m specification" was designed to operate in dangerous deep-sea environments, water channels, and tanks, allowing for the movement and investigation of underwater areas such as fish reefs. Recently, due to a shortage of workers, there has been an increasing number of cases where it is used for underwater inspections on factory production lines. Weighing only 47 kg, it is lightweight and can be easily handled by a small number of people. Its powerful propulsion system, with two horizontal and two vertical thrusters, excels in strong currents and deep, long-distance exploration. Depth and orientation are digitally displayed on the monitor, and it can also be equipped with a high-definition camera (HDTV). **Features** - Equipped with a high-resolution camera with 410,000 pixels and horizontal resolution of 470 TV lines - Zoom lens with optical 10x and digital 4x ultra-wide angle - Features an automatic depth holding function - Equipped with a 3-degree-of-freedom manipulator (up/down, rotation, grab opening/closing) For more details, please contact us or download the catalog.

• Color camera