栃木屋 List of Products and Services

It is compact and has the highest allowable load. Even when fixed under heavy loads for long periods, there is no residual deformation due to the load. The swivel part has a packing structure that retains a large amount of grease, allowing for long-term storage, resulting in excellent waterproof, dustproof, and rustproof effects. The swivel components are surface-hardened (tempered), providing exceptional durability. The main shaft and upper plate (race) are securely fastened with a double crimp, making them very strong against twisting. The wheels are made of a special synthetic resin, primarily phenolic resin, specially developed in collaboration with Sumitomo Bakelite Co., Ltd. for wheels, and through a special molding method, they exhibit outstanding wear resistance, impact resistance, and load-bearing capacity. All rotating parts of the wheels use roller bearings, which not only provide high durability against loads but also ensure smooth wheel rotation.

This is a caster for heavy loads.

This is a caster for heavy loads. Due to its bolt type, it can be secured to equipment with a small mounting area.

Because it uses roller bearings, it has excellent starting and running performance.

By using roller bearings in the wheel rotation section, smoother and more agile movement has become possible.

Because it uses roller bearings, the starting and running performance is very excellent. Additionally, there is no distortion at all even when fixed for a long period of time under load.

This is a compact bolt-type heavy-duty caster. It is particularly excellent in oil resistance, making it suitable for use in special environments such as factories.

Compact integrated low-floor type: Moving and transporting is easy and smooth with casters. When you want to secure it, you can do so easily and firmly with adjustable feet. The installation work for the adjustable feet is minimized. Light touch lift operation: After installing the equipment, height adjustment can be done easily. Selectable foot position: The position of the feet can be freely changed depending on the conditions of the installation surface. Small turning radius: The wheels and feet are integrated into the same part and turn simultaneously, so the turning radius is almost the same as that of the casters alone.

This is a heavy-duty caster that can be used both indoors and outdoors.

The wheels are made of elastoplastic, which has the elasticity of rubber and the hardness of plastic. They have high elasticity, protecting the floor surface and not impacting the loaded items. Additionally, even when fixed for a long time, they do not retain any deformation from the load. The swivel part has a special packing structure, making it excellent in waterproofing, dustproofing, and rustproofing, ensuring smooth operation over a long period. The wheel axle uses roller bearings, providing outstanding rotational performance. They absorb vibrations, have good sound-absorbing effects, and operate quietly.

It has the highest allowable load. The starting resistance has been minimized to the limit. It has high elasticity and does not impact the loaded items. Even when fixed for a long time, there is no residual distortion from the load. The swivel part has a special packing structure, making it waterproof, dustproof, and rustproof, allowing for smooth rotation over a long period.

P.A is a polyurethane elastomer developed by the American company DuPont, recognized worldwide for its hardness, elasticity, load-bearing performance, and outstanding abrasion resistance. It employs aluminum for the wheel hub and high-performance engineering plastics for the bushings, achieving weight reduction while being gentle on the floor. Additionally, it uses two radial bearings in the wheel rotation section, resulting in good maneuverability and quiet operation due to its cantilever support structure.

The wheels have excellent shock resistance, can withstand harsh use, and are lightweight. Two radial bearings are used in the wheel rotation section, featuring a support structure at both ends, resulting in low noise and quiet operation.

This is a medium-duty caster that accommodates various conditions.

It is a compact caster with a high load capacity. Additionally, it does not retain any deformation even when fixed for long periods under load.

The large wheel diameter and the use of roller bearings on the axle make it significantly easier to transport and move heavy objects.

These are casters that are rich in variety and can be used for equipment of various sizes.

Due to its bolt type, it can be securely fixed to devices with a small mounting area.

This is a caster that can be easily installed by simply inserting it into the pipe and turning the washer.

This series, developed for medical use, has an eightfold safety factor, making it a product with very high safety and reliability. Additionally, the wheels are made of polybutadiene rubber, providing excellent cushioning and resulting in casters that produce very little noise.

The durability has significantly improved due to the steel wheels. It is suitable for use on concrete surfaces and for long-term fixed installations.

It is a caster with excellent design quality.

It is a caster that is lightweight compared to rubber wheels and does not deform even when left unattended for a long time.

This is a caster with adjustable feet. It is ideal for areas that require the use of adjustable feet for fixation. Since it is integrated, it is compact, space-saving for installation, and requires fewer installation steps.

This is a modified version of No. 103AF. It allows for the smooth crossing of thresholds and ramps when transporting computers and peripheral devices to and from designated locations (crossing height 15.4mm, angle 14 degrees).

This is a caster stop with added elastomer resin on the floor side. It demonstrates a high anti-slip effect on materials like P tiles.

This is a caster holder developed for ultra-heavy-duty casters and heavy-duty casters with minimal stopper effect. When inserted from the side of the wheel, it simultaneously secures the wheel and the swivel section. It can be used with all heavy-duty casters and is ideal for ultra-heavy vehicles.

When inserted from the side of the wheel, both the wheel and the swivel part are fixed simultaneously. It can be used with all types of casters. Item number 3 has a rubber version, which is safer because it is less slippery compared to the metal version.

This is a stainless steel caster for heavy loads with a low mounting height. There are two types of plate shapes, each available in swivel and fixed types.

This is a caster for heavy loads with a low mounting height. There are two types of plate shapes, each available in swivel and fixed types.

This is a low-profile heavy-duty caster. It is made primarily of stainless steel, which offers excellent corrosion resistance. The wheel materials are nylon and urethane, and the wheel diameters available are φ65 and φ75.

This is a caster with excellent maneuverability due to its dual wheels. It features a heat-resistant dust seal and uses a special grease that excels in low volatility, high-temperature stability, and chemical resistance, making it suitable for use in clean rooms and similar environments.

This is a caster with a wheel diameter of φ100 and a mounting height of 140mm, designed for the highest permissible load.

This is a caster for heavy loads.

This is a caster with a stopper for weight. It can be used in conjunction with TCA-540S and TCA-540SR.

These are casters for heavy loads. They can be used in conjunction with TCA-545S and TCA-540SR.

This is a fixed caster for heavy loads. It can be used in conjunction with TCA-540S and TCA-545S.

This caster uses a cone spring to absorb vibrations and shocks on uneven surfaces, reducing noise. The wheels are made of conductive polyurethane with excellent abrasion resistance (electrical resistance value: below 10kΩ), which prevents static electricity issues and dust adhesion. All metal parts are made of stainless steel.

This is a caster that uses aluminum wheels and emphasizes design. The wheels are made of conductive rubber (with an electrical resistance value of 10kΩ or less), which helps prevent static electricity issues and dust adhesion. The main body is made of stainless steel.

Made of stainless steel, it has excellent corrosion resistance. We offer a wide variety of wheel types. Please choose according to your needs.

Made of stainless steel, it has excellent corrosion resistance. We have a wide variety of wheel types available. Please choose according to your needs.

Made of stainless steel, it has excellent corrosion resistance. We have a wide variety of wheel types available. Please choose according to your needs.

Made of stainless steel, it has excellent corrosion resistance. We offer a wide variety of wheel types. Please choose according to your needs.

Made of stainless steel, it has excellent corrosion resistance. We offer a wide variety of wheel types. Please choose according to your needs.

Made of stainless steel, it has excellent corrosion resistance. We offer a wide variety of wheel types. Please choose according to your needs.