クライミング List of Products and Services

Climbing Co., Ltd. is a company located in Fukuoka Prefecture that manufactures glass volumetric instruments, scientific analytical glassware, and industrial glass products. At the Miyama plant, we produce glass volumetric instruments such as graduated cylinders, volumetric flasks, pipettes, and burettes. We can also accommodate large orders for products other than glass volumetric instruments. At the Chikugo plant, we manufacture other scientific analytical glassware, such as coil coolers, chromatography tubes, separatory funnels, connecting tubes, and distillation apparatus, which can be produced in small lots. If you have any glass processing needs, please feel free to consult with us. We can process glass into various shapes through handwork (burner work) and machine processing. *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Glass
• Glassware and containers

Our company sells glass desiccators (with dome lid and middle plate). A desiccator is a container used to store moisture-sensitive items in a dry state. ■ Structure It is a glass container that combines a dome-shaped lid with a constricted body. The joint parts are frosted. ■ How to use the glass desiccator - Place a desiccant in a crystallization dish or Petri dish and put it at the bottom of the body. - Place the middle plate (made of magnet) on the body. - Place the desired sample on top of the middle plate. *Be careful as there are holes! - Apply grease or petroleum jelly between the lid and the body, then rotate or slide the lid to spread it evenly. - When opening the lid, slowly slide it sideways to open. ■ We have received inquiries from customers about the size and position of the holes in the middle plate, which are opened as ventilation for the desiccant!! We are preparing documents for each specification. ■ Product specifications 【Product Name】 Glass Desiccator with Dome Lid and Middle Plate 【Product Specifications】 For φ120, φ150, φ180, φ210, φ240, φ300 [Unit: mm]

• Glassware and containers
• others

According to the ministerial ordinance on the standards for the components of milk and dairy products, dairy products such as milk are to be measured using the Gerber method for milk fat content. So, do you know what kind of measurements are being taken…? This document includes fundamental knowledge about milk fat measurement that you may hesitate to ask about, such as the common issues with Gerber milk fat meters and what milk fat measurement entails. 【Contents Overview】 ■ Main component composition of milk ■ What is milk fat measurement? ■ Common issues with Gerber milk fat meters ■ Differences in climbing milk fat types ■ Product introduction *For more details, please download the section on 【Fundamental Knowledge of Milk Fat Measurement】 below.

• Glassware and containers
• Glass
• Food Testing/Analysis/Measuring Equipment

The glass manufacturing company "Climbing," which has been in operation for over 80 years, has created the "Acid Cleaner and Metal Surface Treatment Agent" using by-products from the chemicals used in glass manufacturing. This is a one-component acid cleaner for austenitic stainless steel materials (SUS304, 304L, 316, 316L) that can be applied by brush, capable of removing surface contaminants, welding discoloration, and metal oxides (scale) generated during heat treatment. It is an acidic agent based on nitric acid and contains hydrofluoric acid, characterized by forming a denser passive film on the stainless steel surface compared to what occurs naturally. The "Acid Cleaner and Metal Surface Treatment Agent" includes stainless steel acid cleaners (for application, spraying, and immersion), scale cleaning agents (for application, spraying, and immersion), and brush-type rust removers for steel (for application and spraying), among others. **Features of the Stainless Steel Acid Cleaner (for application):** - Excellent spreadability, allowing for even application and cost-effectiveness. - Superior degreasing and cleaning power, capable of simultaneously removing scale, fats, dust, and other common contaminants. - Does not contain chlorine-based substances, and its components are water-soluble, making post-treatment easy. *Please download the PDF below for materials that also include "Applications and Examples of Use"!

• Cleaning agents
• Rust Inhibitor

"For the quantification of textures in cosmetics, food, etc." The "Stirring Type Viscosity Evaluator SVE-1" allows for measurement while stirring liquids. It supports on-site physical property measurements that cannot be done with lab equipment. Equipped with WiFi communication capabilities (optional), it enables data transfer and visualization to PCs or tablet devices. This viscosity evaluator measures the flow resistance of liquids during stirring, applicable in material formulation, mixing, foaming, and everyday stirring tasks like dissolving or kneading food. By sensing flow resistance, it assesses the ease of mixing and infers changes in the state of the subject. 【Features】 - Built-in temperature sensor accurately detects the sample temperature during measurement. - Calculates and displays the approximate viscosity value of the sample. - Measures the "raw" flow resistance felt from various factors, including viscosity, stirring posture, fluctuations, and characteristics. *For more details, please download the PDF or feel free to contact us.*

• Other measurement, recording and measuring instruments
• Food Testing/Analysis/Measuring Equipment

Our company, which specializes in the manufacturing of industrial glass products, is currently distributing a document titled "Problem-Solving Case Studies," which summarizes information about glass and solutions to our customers' material concerns. We provide clear explanations addressing fundamental knowledge and customer inquiries, such as "What kind of substance is glass?", "Why is it transparent?", "Why is it easy to mold?", and actual case studies where we have resolved issues raised by pharmaceutical companies and quality control personnel. [Contents (Excerpt)] ■ What kind of substance is glass? Liquid? Solid? ■ Why is glass thermally and chemically stable? ■ Problem-solving case studies ■ Introduction of our standard products (such as volumeters) *For more details, please refer to the PDF document. Feel free to contact us with any inquiries.

• Glass

Our company, which manufactures glass volumetric flasks and other items, also offers custom "sandblasting numbering processing." We can accommodate not only item numbers and dates but also lot number engravings. Numbering contributes to the efficiency of history management and sample management. It helps prevent human errors such as label peeling and mix-ups. 【Features】 ■ A lineup of volumetric flasks, hollow pipettes, etc. ■ Custom direct engraving of item numbers using sandblasting ■ Traceability and issuance of internal inspection reports available (for a fee) ■ Established quality management system certified by ISO 9001 *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other physicochemical equipment
• Food Testing/Analysis/Measuring Equipment
• pipette

The glass analysis device "Cyan Distillation Apparatus" is used for factory wastewater testing methods. It is a glass analysis device manufactured at a specialized factory that prides itself on quality technology. In addition to Type 1 Cyan Distillation Apparatus, we also offer Type 2 and Type 3 products, and we have a stand available as well. 【Parts】 [Cyan Distillation Apparatus Type 1] ■ Round-bottom flask 1000ml 24/40 (with joint) ■ Round-bottom flask 750ml 24/40 (with joint) ■ Cyan distillation trap 24/40×18/9 ■ Coil cooler 300mm 18/9 ■ Collection adapter 18/9 ■ Stoppered graduated cylinder 250ml *For more details, please refer to the catalog or feel free to contact us. Custom specification changes are also possible.

• Gas recovery/treatment equipment
• Glass
• Glassware and containers

The glass analysis glassware "Tempax Plate" has a smaller thermal expansion coefficient compared to general soda glass, demonstrating excellent heat resistance and thermal shock resistance in various fields. Products below 25.4°C are finished with a flat and smooth surface using the float method, achieving high light transmittance and very excellent optical quality with minimal optical distortion. Products over 28.6t are manufactured using the rollout method, resulting in a fine wave pattern on the glass surface; however, polishing can achieve surface quality equivalent to that of the float method. 【Features】 ■ Heat resistance temperature 　　Normal use: 450°C (long-term use / over 10 hours) 　　Maximum use: 500°C (short-term use / under 10 hours) ■ Excellent heat resistance characteristics ■ Demonstrates thermal shock resistance *For more details, please refer to the catalog or feel free to contact us.

• Other physicochemical equipment
• tank
• Circuit board design and manufacturing

Our company's dispenser, the "Pasteur Pipetter," allows for one-touch suction and discharge of liquid volumes. It can be used to draw liquid with the Pasteur pipette and transfer it to another container, making it suitable for moving media and sampling. Some users attach a rubber bulb or similar device to the suction end, but using our pipetter greatly enhances operability! 【Features】 ■ Made of Teflon, it has excellent chemical resistance and heat resistance ■ Can measure with a scale line that is one-tenth of the total volume ■ Push-type design makes it easy for anyone to operate

• Analytical Equipment and Devices
• Water quality testing

The volumetric "Intermediate Graduated Pipette" has a total length of 320mm, making it 10-20% shorter than conventional graduated pipettes (JIS standard products). The operation with a pipette controller installed in a clean bench is significantly improved. Since all specifications and lengths are standardized to 320mm, it is a convenient product for storage. 【Features】 ■ All specifications and lengths standardized to 320mm ■ Graduation tolerance complies with JIS R3505 Class A ■ Color code for capacity identification is the same as that of the intermediate and tip graduated pipettes of product codes 2050 and 2055 *For more details, please refer to the catalog or feel free to contact us.

• Analytical Equipment and Devices
• Water quality testing

The capillary rise method surface tension meter "Surfgauge Dyne Gauge, DG-1" enables accurate measurements by applying an ultra-hydrophilic inorganic film to the inner wall. This special coating possesses high anti-fouling capabilities and excellent self-cleaning abilities through flowing water. The main reasons why the capillary rise method has not been commercialized until now are: - The sample does not completely wet the inner wall of the capillary, preventing the liquid from rising to a sufficient height. - Due to its narrow tube design, cleaning after measurement is difficult. Our product solves these issues with the special coating, allowing anyone to easily and quickly perform measurements. 【Features】 ■ Excellent portability, enabling quick measurements in the field. ■ Measurement possible with a very small sample (a few μL). ■ Lower price compared to conventional surface tension meters. *For more details, please refer to the catalog or feel free to contact us.

• paint

The "screw vial bottle" is a glass tube made from "borosilicate glass (JR-1)," which has extremely low alkali leaching and excellent heat and chemical resistance. We also offer products with graduated markings, so you can use them according to your needs. Please feel free to consult us. 【Specifications】 ■ Body: Borosilicate glass (JR-1) ■ Cap: PP (polypropylene) ■ Packing: High sheet / PP bonded *For more details, please refer to the catalog or feel free to contact us.

• Chemicals

The "Birthday Celebration Glass Plate" is a glass plate made by Climbing Co., Ltd., which manufactures industrial glass products and processes and sells sheet glass. Utilizing glass blasting and chemical treatment, we offer products that respond to various needs by leveraging various glass engraving technologies that harmonize with light. 【Features】 ■ Customizable handwritten messages ■ Customizable handprints, footprints, and text ■ Adjustable to desired sizes *For more details, please refer to the PDF document or feel free to contact us.

• Glass
• Processing Contract

The "Birthday Celebration Plate" is a glass plate made by Climbing Co., Ltd., which manufactures industrial glass products and processes and sells sheet glass. We offer products that meet various needs through special methods such as etching letters into the glass from the back and transparent processing on the back. 【Features】 ■ Letters can be engraved ■ Transparent processing on the back ■ Customizable to desired sizes *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

The "Birthday Celebration Photo Window Mirror Plate" is a mirror plate produced by Climbing Co., Ltd., which manufactures industrial glass products and processes and sells sheet glass. Using a special method, it is possible to make only the part where the photo is inserted transparent from the back of the mirror. This allows for a completely glass-like finish, resulting in a clear photo. 【Features】 ■ Engraving text is possible ■ Transparent processing on the back ■ Customizable to desired sizes *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

We would like to introduce the "Etched Glass Installation Examples" from Climbing Co., Ltd., which manufactures industrial glass products and processes and sells plate glass. We express various techniques of etching, such as line engraving, flat engraving, and deep shallow engraving, according to the design. The entrance door achieves both light intake and visual beauty. A relief glass is embedded in part of the wall, providing effects of light transmission and privacy. 【Installation Examples】 ■ Medical Facilities ■ Installation Locations: Main entrance door, examination room door ■ Design: Rose *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

We would like to introduce the "Frosted Glass Installation Case" by Climbing Co., Ltd., which manufactures industrial glass products and processes and sells plate glass. We used frosted glass that has been chemically treated on one side of the transparent glass, creating fine and smooth irregularities. This glass functions as a privacy screen from passersby, and the presence of the design changes depending on the angle of the light. 【Installation Case】 ■ Building (Osaka) ■ Installation Location: Refresh Room ■ Design: Bamboo *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Glass

We would like to introduce the "Frosted Glass Installation Examples" from Climbing Co., Ltd., which manufactures industrial glass products and processes and sells plate glass. We used frosted glass that has been chemically treated on one side of the transparent glass, creating fine and smooth textures. This adds a unique touch to the windows and partitions of buildings, bringing warmth to functional spaces. 【Installation Examples】 ■ Public Facility (Former Hōnami Town Hall, Fukuoka Prefecture) ■ Installation Locations: Windows, partition walls, handrails ■ Design: Daffodil *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

"FSUS-5 (for immersion)" is an immersion-type pickling agent for austenitic stainless steels (such as SUS304, 304L, 316, 316L). It allows for uniform treatment simply by immersing in a tank, making it suitable for small items or structures with complex shapes. Additionally, if the pickling solution is circulated with an acid-resistant pump, flushing of pipes is also possible. This agent is based on nitric acid and contains components such as hydrofluoric acid, and by diluting it with water or adjusting the liquid temperature, the finishing quality and processing time can be easily controlled. 【Features】 ■ Easy processing by immersion alone ■ All areas where the liquid can enter can be treated ■ Acid treatment of the inner wall of pipes is possible by circulating the solution with an acid-resistant pump ■ The components of the solution are water-soluble, making post-pickling treatment easy ■ Does not contain chlorine-based substances *For more details, please refer to the PDF document or feel free to contact us.

• detergent
• Cleaning agents
• Other safety and hygiene products

The "SS-3 Spray (for spraying)" is a spray-type pickling agent for austenitic stainless steel (such as SUS304, 304L, 316, 316L, etc.). By spraying the agent with a spray machine, it is effective for areas where brush application is difficult (such as high places where work is dangerous or areas with complex shapes that are hard to coat) and when pickling treatment needs to cover a wide area, allowing for speedy spraying operations. It is a chemical agent based on nitric acid, blended with hydrofluoric acid and other components. 【Features】 - Rapid, wide-area, and uniform application by spraying the agent with a spray machine - Easy treatment even in hard-to-brush areas (high places or complex shapes) - Less unevenness compared to brush application - The chemical components are water-soluble, making post-pickling treatment easy - Does not contain chlorine-based substances *For more details, please refer to the PDF document or feel free to contact us.

• detergent
• Cleaning agents
• Other safety and hygiene products

"SS-3 (for application)" is a gel-type pickling agent for austenitic stainless steel (such as SUS304, 304L, 316, 316L). It has good spreadability like paint and a viscosity suitable for brush application, and since it does not require a dipping tank, it is effective for stainless steel structures that are large, heavy, fixed with anchors, or otherwise difficult to move, making immersion impossible. Additionally, it only acts on the applied areas, allowing for partial pickling treatment. It is a chemical based on nitric acid, formulated with hydrofluoric acid and other components. 【Features】 - Adjusted to a viscosity suitable for brush application, with good spreadability and smooth brush glide. - Convenient for partial treatment since it acts only on the applied areas. - Capable of treating objects that are difficult to move or large and heavy items that cannot be immersed. - The chemical components are water-soluble, making post-pickling treatment easy. - Does not contain chlorine-based substances. *For more details, please refer to the PDF document or feel free to contact us.

• detergent
• Cleaning agents
• Other safety and hygiene products

At Climbing Co., Ltd., we offer a wide variety of glass containers such as beakers, flasks, and bottles. Our soda-lime glass 'narrow-mouth and wide-mouth reagent bottles' are available in white and brown. Capacities include 30ml, 60ml, 120ml, 250ml, 500ml, and 1000ml. 【Product Lineup】 ■ Narrow-mouth reagent bottle (white) ■ Narrow-mouth reagent bottle (brown) ■ Wide-mouth reagent bottle (white) ■ Wide-mouth reagent bottle (brown) *For more details, please refer to the PDF document or feel free to contact us.

• Glassware and containers
• Glass

At Climbing Co., Ltd., we handle a variety of laboratory glassware. We offer six types of "desiccators" with a lid and middle plate, with flange inner diameters ranging from 118φ to 300φ. It is also possible to manufacture equipment tailored to your needs, starting from just one piece. We also repair damaged glassware, so please feel free to consult us. 【Product Lineup】 ■120 (Flange inner diameter: 118φ) ■150 (Flange inner diameter: 155φ) ■180 (Flange inner diameter: 180φ) ■210 (Flange inner diameter: 210φ) ■240 (Flange inner diameter: 240φ) ■300 (Flange inner diameter: 300φ) *For more details, please refer to the PDF document or feel free to contact us.

• Glassware and containers
• Glass

At Climbing Co., Ltd., we handle a variety of laboratory glassware. The "Suction Filtration Bell G" is available in seven sizes, with inner diameters ranging from 75φ to 240φ. We can also manufacture custom glassware tailored to your needs, starting from just one piece. Additionally, we offer repair services for damaged glassware, so please feel free to consult us. 【Product Lineup】 ■ Inner diameter: 75φ / Height: 120H ■ Inner diameter: 120φ / Height: 150H, 180H ■ Inner diameter: 150φ / Height: 180H, 210H ■ Inner diameter: 180φ / Height: 240H ■ Inner diameter: 240φ / Height: 300H *For more details, please refer to the PDF document or feel free to contact us.

• Glassware and containers
• Glass
• Filtration Equipment

At Climbing Co., Ltd., we handle a variety of physical and chemical glassware. The "Gas Replacement Device" lineup includes the "Single Tube Type 6-Unit," as well as the "Parallel Piping Type 6-Unit" and the "Staggered Piping Type 4-Unit." We can also manufacture custom original devices with a wide variety of valves that are outside standard specifications. Additionally, we offer repair services for broken glassware, so please feel free to consult us. 【Product Examples】 ■ Single Tube Type 6-Unit (Valve TS19) ■ Parallel Piping Type 6-Unit (Valve TS19) ■ Staggered Piping Type 4-Unit (Valve TS19) *For more details, please refer to the PDF document or feel free to contact us.

• Glassware and containers
• Glass
• Gas recovery/treatment equipment

At Climbing Co., Ltd., we can provide "glass plates" tailored to your needs. We offer a variety of options, including "Tempax plates," which have a lower thermal expansion coefficient compared to standard soda glass and exhibit excellent heat resistance and thermal shock resistance across various fields, as well as "Tempax reinforced plates" and "transparent quartz glass plates." Additionally, we can provide estimates for "soda glass plates" and "film-coated plates," so please feel free to consult with us. 【Product Lineup】 ■ Tempax plates ■ Tempax reinforced plates ■ Transparent quartz glass plates ■ Reinforced glass plates (soda glass) *For more details, please refer to the PDF materials or feel free to contact us.

• Glass

The "Gerber Milk Fat Meter" is a glass instrument used for measuring the fat content of raw milk. Thanks to the volume adjustment processing technology that only a volumetric manufacturer can provide, there is no need to adjust the fat column. Additionally, the mouth shape is designed to fit the type of rubber stopper, making it easy to use and preventing the deterioration of the rubber stopper. 【Features】 ■ Easy measurement of milk fat content ■ No need to adjust the fat column ■ User-friendly mouth shape that fits the type of rubber stopper ■ Prevents deterioration of the rubber stopper ■ Two product lineups available *For more details, please refer to the PDF document or feel free to contact us.

• Glass
• Glassware and containers

The "Screw Vial Bottle" handled by Climbing Co., Ltd. is manufactured from glass tubes, resulting in uniform wall thickness on both the sides and the bottom. It is lightweight and suitable for processes such as washing, sterilization, freeze-drying, and capping. Additionally, it has high transparency, meeting the transparency requirements for visual inspection and electron beam inspection. If you would like a sample, please obtain the form by clicking the "PDF Download" button below, fill it out, and submit your request. 【Product Features】 ■ Uniform wall thickness on both the sides and the bottom, manufactured from glass tubes ■ Lightweight and suitable for processes such as washing, sterilization, freeze-drying, and capping ■ High transparency, meeting the transparency requirements for visual inspection and electron beam inspection *For more details, please refer to the PDF materials or feel free to contact us.

• Glass
• Glassware and containers

The "Separable Flask (G)" is a separate type of flask. The joint area is treated with a flat grind to enhance adhesion. It is easy to clean, and by changing the cover, the number of openings can be altered. Additionally, we offer the "Grease-less Separable Flask," which achieves complete adhesion with minimal suction without the need for grease, as well as the "Separable One-Touch Clamp (C)." 【Features】 ■ The joint area is treated with a flat grind to enhance adhesion. ■ Easy to clean and allows for changing the number of openings by changing the cover. ■ Various covers are available. ■ Custom production is also possible. ■ Available in "cylindrical" and "round" types. *For more details, please refer to the PDF materials or feel free to contact us.

• Glass
• Glassware and containers

At Climbing Co., Ltd., we handle a variety of laboratory glassware. Our original "suction filtration bottles" come in several options, including those for rubber tube connections and rubber stoppers, as well as models with a bottom outlet (for rubber stoppers). We also offer "glass filters (Büchner funnel type)" and "filter funnels (magnetic, Büchner type)." Additionally, we can accommodate hole drilling for rubber stoppers used in suction filtration bottles. 【Product Lineup】 ■ Suction filtration bottles (for rubber tube connections) ■ Suction filtration bottles (for rubber stoppers) ■ Suction filtration bottles with bottom outlet (for rubber stoppers) *For more details, please refer to the PDF document or feel free to contact us.

• Glass
• Glassware and containers
• Filtration Equipment

At Climbing Co., Ltd., we produce "glass volumetric instruments" such as graduated cylinders, graduated flasks, pipettes, and burettes. They come with a reliable JIS mark. Traceability and internal inspection certificates are available for a fee. In addition to custom orders for special capacities of volumetric instruments, we also manufacture glass bottles and industrial glass components that can be produced in small lots. 【Features】 ■ Reliable JIS mark ■ Traceability and internal inspection certificates issued (for a fee) ■ Custom orders for special capacities of volumetric instruments available *For more details, please refer to the PDF materials or feel free to contact us.

• Glass
• Glassware and containers

The "Short Type Graduated Pipette" is manufactured to be 10-20% shorter in total length compared to conventional graduated pipettes (JIS standard products). Since all specifications and lengths are standardized to 320mm, it is convenient for storage. The operation with a pipette controller in a clean bench is significantly improved. The allowable error for the scale is compliant with JIS R3505 Class A. If you would like a sample, please obtain the form by clicking the "PDF Download" button below, fill it out, and submit your application. 【Features】 ■ Manufactured to be 10-20% shorter in total length compared to conventional graduated pipettes (JIS standard products) ■ All specifications and lengths are standardized to 320mm, making it convenient for storage ■ Operation with a pipette controller in a clean bench is significantly improved ■ The allowable error for the scale is compliant with JIS R3505 Class A *For more details, please refer to the PDF document or feel free to contact us.

• Glass
• Glassware and containers
• pipette

At Climbing Co., Ltd., we offer repair services for glass products. This document introduces examples of repairs and reference prices. Estimates are free. We can also handle items from other manufacturers. Please feel free to consult with us. 【Features】 ■ Free estimates ■ If repair is not possible, we will provide a new item at a special price ■ Repairs can be done for items from other manufacturers as well *For more details, please refer to the PDF document or feel free to contact us.

• Glass
• Glassware and containers

The "Dyne Gauge, DG-1" is a surface tension meter based on the capillary rise method. By applying an ultra-hydrophilic inorganic film to the inner wall, it enables accurate measurements. This special coating has high anti-fouling capabilities and excellent self-cleaning abilities through running water. With just a small amount (a few μL) of sample, anyone can easily and quickly perform measurements, achieving a lower price compared to conventional surface tension meters. 【Features】 ■ Easy and quick measurements that anyone can perform ■ Excellent portability, allowing for rapid measurements in the field ■ Measurement possible with a very small sample (a few μL) ■ Lower price compared to conventional surface tension meters *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "Contact Angle Gauge, ST-1" is a portable contact angle meter that allows for wettability testing based on contact angle values. Its small contact area enables quick measurements on-site and is suitable for samples that cannot be cut. Additionally, it does not require utilities such as power sources (excluding batteries for the light source). 【Features】 ■ Enables wettability testing based on contact angle values ■ Ideal for measuring samples that cannot be cut ■ Portable and allows for quick measurements on-site due to its small contact area ■ Does not require utilities such as power sources (excluding batteries for the light source) *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

We custom-manufacture "graduated flasks for tablets" for pharmaceutical manufacturers. Are you having trouble with the small neck of graduated flasks with a small capacity (5-25ml)? Have you ever found that the small inner diameter of the neck prevents you from putting tablets inside the graduated flask? Generally, the size of tablets is said to be around Φ7-8mm for easy swallowing. We manufacture products with a larger neck as a custom order. 【Features】 ■ Custom manufacturing of products with a larger neck ■ Standard inner diameter: Φ8mm / Custom product inner diameter: Φ11.8mm (minimum part) *For more details, please refer to the PDF document or feel free to contact us.

• Other laboratory equipment and containers
• others

When many glass volumetric flasks of the same capacity are used, it can be difficult to distinguish between them, and we often see users with labels attached. Isn't it the case that once the label comes off, it becomes unidentifiable? In climbing, we also offer custom numbering processing. Typically, it is in a frosted glass style (sandblasted), but if you order in bulk, brown numbers are also possible. It can be done with letters or alphabets. 【Features】 ■ Custom numbering processing ■ Typically in a frosted glass style (sandblasted) ■ Brown numbers are possible for bulk orders ■ Can be done with letters or alphabets *For more details, please refer to the PDF document or feel free to contact us.

• Glassware and containers
• others

Climbing Co., Ltd. is a manufacturer of large suction filtration bottles. The "suction filtration bottle," which is said to have rolled around under laboratory tables in the past, was named "kick bottle" because it was placed on the floor with casters, allowing students to move it by kicking it with their feet. Currently, our company manufactures products of 5 liters or more within Japan. When you see our products, please feel free to check if you need assistance. [Features] ■ Products of 5 liters or more manufactured in Japan *For more details, please refer to the PDF materials or feel free to contact us.

• Glassware and containers
• others

When it is difficult to pour in or out the solution, a funnel-shaped modification is convenient. Funnel-shaped modifications at the top of burettes and volumetric flasks. By shaping the mouth like a funnel, work efficiency can be improved. This type of modification is one of our specialties, as we are committed to domestic production. If you have any issues with ready-made products, please feel free to contact our sales representative. Funnel modifications at the top of burettes are also common. 【Features】 ■ Funnel-shaped modifications at the top of burettes and volumetric flasks ■ Improving work efficiency by shaping the mouth like a funnel ■ Funnel modifications at the top of burettes are also common ■ Our specialty, committed to domestic production *For more details, please refer to the PDF materials or feel free to contact us.

• Processing Contract
• Other contract services
• others

The scale lines of glass volumetric flasks are typically brown and permeated into the glass to prevent them from wearing off due to solution adhesion or cleaning, which is common in Japan. However, depending on the solution used, it can be difficult to see the scale, right? The scale color is not limited to brown. Colors like that of soy sauce can make the scale hard to read. In such cases, we create flasks with white scales. 【Features】 ■ White scale for when the scale is hard to see Note: The white scale lines may fade depending on the cleaning method used. *For more details, please refer to the PDF document or feel free to contact us.

• Glassware and containers
• others

Our company, which specializes in the manufacturing of industrial glass products, is currently distributing a document titled "Basic Knowledge of Glass," which summarizes information about glass in an easy-to-understand manner. It provides clear explanations for common questions that beginners might have, such as "What kind of substance is glass?", "Why is it transparent?", and "Why is it easy to shape?" 【Contents (Excerpt)】 ■ What kind of substance is glass? Liquid? Solid? ■ Why can glass have a flexible composition and properties? ■ Why is glass thermally and chemically stable? ■ Examples of our production *For more details, please refer to the PDF document. Feel free to contact us with any inquiries.

• Glass