伸栄産業 List of Products and Services

Valve for pressure devices Achieved high pressure and large capacity of 35MPa and 100L/min (G02), 160L/min (G03).

It is also possible to combine regulators, filters, pressure switches, and more.

We have a wide variety of aftercoolers, air tanks, air dryers, separators, and more.

It excels in control, allowing for reduced takt time through acceleration control and multi-point stops.

These are fittings for piping used in pneumatic equipment and various fluids, as well as resin tubes. We offer a range from general-purpose fluids to those for special environments.

We heard from a dedicated machine set manufacturer that "when manufacturing products, there are slight variations in numerical control accuracy, leading to individual differences." Upon investigating the machine on-site, it became clear that the issue was that the pneumatic equipment could not adequately respond to precise movements. Therefore, we proposed an "actuator" as an alternative device that achieves high precision movements through electric control instead of pneumatic equipment. As a result of selecting and proposing various devices, it was immediately decided to adopt our solution, as "this can solve the issues of individual differences in numerical control and eliminate air." Our understanding of the customer's situation in detail and our ongoing grasp of the manufacturer's product information led to a quick resolution. *For more details, please feel free to contact us.*

We received an inquiry from Company R, stating, "We are using a bar-type ionizer from another company, but is it possible to replace it with a nozzle-type ionizer?" In response, we accompanied the SMC representative to promote the nozzle-type ionizer. We provided detailed explanations about the performance and price of the nozzle-type ionizer, as well as the effects of its use, which convinced the customer and led to an order. [Case Study] ■ Company R ■ Concerns and Inquiry - They want to replace the bar-type ionizer with a nozzle-type one. ■ Proposal and Result - We accompanied the manufacturer’s representative to provide detailed explanations about the performance, price, and effects of the nozzle-type ionizer, resulting in an order. *For more details, please feel free to contact us.

Shin'ei Sangyo will assist you in solving various challenges such as cost-cutting and improving productivity that you may be facing. Company T's current pressure switch has been discontinued, and they were looking for alternatives from other manufacturers. We confirmed the specifications they are currently using and proposed the IS10-01S and the vacuum model ZSM1-121. Since both are SMC stock items, they were satisfied with the delivery time, price, and specifications. [Case Study] ■ Company T ■ Concerns and Consultations - Discontinuation of the currently used pressure switch ■ Proposal and Results - Confirmed the current specifications and proposed the IS10-01S and the vacuum model ZSM1-121 - They were satisfied with the delivery time, price, and specifications since these are stock items *For more details, please feel free to contact us.

At Equipment Manufacturer N, they have traditionally used chiller units from other manufacturers and were considering an update due to equipment lifespan. SMC's thermal chiller is available for actual machine loan, so we brought the "HRS050-A-20" with specifications equivalent to the existing unit for testing. After confirming that there were no issues with the replacement, we received positive feedback as the temperature stability of ±0.1°C significantly reduced the failure rate compared to the previous chiller unit. 【Case Study】 ■ Equipment Manufacturer N ■ Concerns and Consultation - Considering an update due to the equipment lifespan of chiller units from other manufacturers ■ Proposal and Results - Conducted a test with an actual machine loan of SMC's thermal chiller - The failure rate significantly decreased compared to the previous chiller unit *For more details, please feel free to contact us.

"Extraction Arms" is a device designed to be used in conjunction with fans and ducts, primarily for the pinpoint suction of welding fumes at the source of emission. The self-supporting flexible arm can adjust the position of the hood according to the dust generation location, allowing for efficient local dust collection (local exhaust) tailored to the work area. Additionally, after use, the arm can be folded and stored compactly, so it does not interfere with work when dust is not being generated. 【Features】 ■ The flexible arm allows for adjustment of the hood position according to the dust generation location. ■ Enables efficient local dust collection (local exhaust) tailored to the work area. ■ The arm can be folded and stored compactly after use. ■ Does not interfere with work when dust is not being generated. ■ Recommended for those looking to enhance the operability of existing dust collection systems. *For more details, please refer to the PDF document or feel free to contact us.

This catalog features standard pneumatic equipment manufactured by Azbil TACO, handled by Shin-Ei Sangyo Co., Ltd. It introduces products such as "One-Touch Tube Fittings / One-Touch Connection Speed Controllers," which are used for transmitting pressure air between devices, such as between a 5-port solenoid valve and an air cylinder, and can be easily secured by simply inserting the plastic tube into the fittings. Please use this for selecting products. [Contents (excerpt)] ■ Azbil TACO 60 Series Modular FRL ■ Norgren FRL Selection ■ Azbil TACO FRL Classics ■ One-Touch Tube Fittings / One-Touch Connection Speed Controllers ■ 60 Series Modular FRL Products *For more details, please refer to the PDF materials or feel free to contact us.

This catalog features the "High-Performance Filters & Strainers" manufactured by Tsukasa Corporation, handled by Shin-Ei Sangyo Co., Ltd. We introduce the "C/CW Series," which is compact and can be easily integrated into various fluid equipment, and the "J Series," which is easy to install on existing lines. Our products address issues such as "contamination problems," "cost management," and "reducing environmental impact and compactness" in various fluid management systems. 【Featured Products (Excerpt)】 ■ Small Coin Filter "C/CW Series" ■ Small Filter with O-Ring "CP Series" ■ Quick Maintenance Small Filter "LC Series" ■ Block Type Small High-Pressure Filter "LE Series" ■ Screen Exchangeable Filter Element "EL Series" *For more details, please refer to the PDF document or feel free to contact us.

The "Power Pack Cylinder" is a high-thrust pneumatic actuator that integrates a hydraulic generation device and hydraulic cylinder into a compact unit, capable of generating high-pressure hydraulic power through pneumatic pressure. It generates high thrust of 0.5 to 7.9 tons solely through pneumatic pressure. Control can be performed with a single pneumatic valve, similar to a pneumatic cylinder. It can achieve over 50 reciprocating operations per minute, and the thrust can be infinitely adjusted by changing the pneumatic pressure. 【Features】 ■ Generates high thrust of 0.5 to 7.9 tons solely through pneumatic pressure ■ Compact design with the same inner diameter as a φ50 pneumatic cylinder to generate 1 ton of thrust ■ Control is performed with a single pneumatic valve, similar to a pneumatic cylinder ■ Thrust can be infinitely adjusted by changing the pneumatic pressure ■ Capable of over 50 reciprocating operations per minute *For more details, please refer to the PDF document or feel free to contact us.

This catalog features the "Solenoid Operated Valves" manufactured by Hirose Valve Industry Co., Ltd., handled by Shin-ei Sangyo Co., Ltd. Despite high pressure, it achieves excellent stable operation with low pressure loss, completely stopping the flow of oil and accommodating bidirectional flow, such as the "HSOH Series," and the "HSO Series," which ensures stable operation even at high capacity while maintaining low pressure loss. We are also challenging new fluid systems and have a wide range of special valves available, so please use this for product selection. [Contents] ■ 35MPa HSOH Series ■ 21MPa HSO Series ■ 21MPa HSO Series ■ 21MPa Cartridge Type *For more details, please refer to the PDF materials or feel free to contact us.

The "SZ Series" is a pressure switch that supports a range of 0.003 to 11.5 MPa. It features a high-quality phosphor bronze bellows in the pressure sensing element. It can be used with pressure media such as pneumatic, hydraulic, and gas pressure. In addition to the standard capacity SPDT micro switch, there are also weak load types (for DC24V) and sealed types (environmentally resistant), as well as DPDT micro switches available. 【Features】 ■ High-quality phosphor bronze bellows in the pressure sensing element ■ Usable with pressure media such as pneumatic, hydraulic, and gas pressure ■ SUS316L bellows is recommended for use with corrosive pressure media, water, and steam ■ Supports a range of 0.003 to 11.5 MPa ■ CCC, UL, and CSA certified products *For more details, please refer to the PDF document or feel free to contact us.

This document is the specification sheet for the "202 Series" shut-off valves manufactured by Fuji Engineering Co., Ltd., handled by Shin-Ei Sangyo Co., Ltd. We introduce the maximum flow rate, maximum operating pressure, materials, weight, and other details by model number. Additionally, we have included charts regarding pressure drop characteristics. We encourage you to read it. 【Featured Products】 ■LVSO-202T/G-WA* ■LVSO-202T/G-WD* ■LVSH-202T-A* ■LVSH-202G-A*-TB ■LVSH-202T-WD*X *For more details, please refer to the PDF document or feel free to contact us.

The "DA Series" is a flow control valve for oil and air pressure that achieves a strong magnetic field through a dual Halbach magnet array, placing a differential voice coil in its annular space, providing more than double the thrust of conventional models, along with excellent responsiveness and contamination resistance. The operating oil contamination level is NAS1638 class 10 or lower (recommended filter: absolute 20μm). There are two types available: the integrated amplifier model "DA03S" and the separate amplifier model "DA03RS," with a separate servo amplifier "ADA" also available. 【Features】 ■ Excellent responsiveness ■ Excellent contamination resistance ■ Two types available: integrated amplifier and separate amplifier models ■ High-temperature type (150°C), compatible with water-glycol, phosphate ester, fatty acid ester, and brake oil *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the distribution valves "DV/DW/GW/LV" that we handle. The "DV type" is used in dual-line systems and accurately supplies lubricant to each lubrication point based on the pressure of the lubricant being alternately pumped from the supply main. The operation of the distribution valve can be confirmed by an indicator. In addition, we offer the "DW type," which makes it easy to change to an odd number of outlets; the "GW type," which allows for easy increase or decrease of lubrication points; and the "LV-100 type," which enables centralized management of lubrication points. 【DV Type Features】 - Accurate lubrication - Robust and excellent durability - Maximum operating pressure of 21 MPa - Ability to adjust the lubrication amount and check operation for each outlet *For more details, please refer to the PDF materials or feel free to contact us.

We would like to introduce our products, the "FB Manual Grease Pump" and the "U Electric Grease Pump." The "FB Manual Grease Pump" is compact and easy to use, making it suitable for lubrication in areas with relatively low lubrication frequency, short piping, and fewer lubrication points. Additionally, the "U Electric Grease Pump" addresses the trend of larger and faster machinery, contributing to the rationalization of equipment. We also offer the "PV Pressure Control Valve," which accurately controls the system's pressure. 【Features of the FB Manual Grease Pump】 - Simplification of pipeline - Improved reliability of lubrication - Easy handling and operation - Robust and simple structure *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the electric grease pump and distribution valve that we handle. The "UE" is a pump used in dual-line systems. With high pressure and large discharge volume, it supports downsizing of piping and extensive lubrication, contributing to cost reduction of lubrication systems. The piping connection and refill port are compatible with G-thread connections and can handle up to 40MPa. Additionally, the "DX" is a distribution valve that supports ultra-high pressure of 40MPa and allows switching between single and double discharge. It is possible to independently change the discharge mode to single or double for all elements. 【UE Features】 ■ Achieves high pressure and large discharge volume ■ Unique pump structure ■ Capable of high-pressure piping connections *For more details, please refer to the PDF materials or feel free to contact us.

The energy-saving effects of low pressure are understood, but there are concerns about decreased production efficiency due to insufficient pressure. We respond to customer voices like 'We are troubled by the energy loss in pressure boosting.' with the booster compressor from Anest Iwata. As an electrically driven boosting device, it provides significant energy-saving effects more efficiently and reliably than air-driven types. We can propose suitable boosters based on the situation, from one unit to multiple units. Energy saving can be achieved more effectively in any production environment. 【Features】 - Compact booster compressor with oil-free type - High-quality air can be easily used even in narrow spaces - Closed type, which eliminates valve noise and excels in quietness - Uses composite resin pistons made of heat-resistant thermosetting resin - Excellent durability with no seizure or galling *For more details, please refer to the PDF materials or feel free to contact us.

The "AAB type" is an air blow package that achieves an energy-saving rate of approximately 70% for continuous air blowing. The lineup includes "AAB37," as well as "AAB55," "AAB75," and "AAB110." It is suitable for air blowing of iron and aluminum plates, machine parts, bottles and cans, and large parts. 【Features】 ■ Energy-saving rate of approximately 70% for continuous air blowing *For more details, please refer to the PDF materials or feel free to contact us.

This product is an air purification device that resolves issues with control equipment and electrical devices caused by corrosive gases. It can be used in wastewater treatment plants, paper mills, steel mills, food processing plants, volcanic tourist sites, chemical plants, petroleum refining and petrochemical industries, geothermal power plants, and more. We offer a variety of lineups depending on the application, allowing customization according to the customer's usage environment. 【Features】 ■ Responds to high concentrations and rapid concentration changes ■ Removal efficiency of over 95% (depending on the airtightness of the usage environment) ■ Main target gases: hydrogen sulfide gas, methyl mercaptan, sulfurous acid gas ■ Various lineups available depending on the application ■ Customizable according to the customer's usage environment *For more details, please refer to the PDF document or feel free to contact us.

This catalog introduces the 'Q-Lock Element', which enables high-precision positioning (within 3μm repeatability) and quick clamping (fixing). In addition to the "Q-Lock Element Pin Type" and "Q-Lock Element Hole Type," it also features many options such as "Air Blow Gun Valve," "Pneumatic Controller," "Side Operation Type Extension Tool," and "Rough Guide." By achieving easy, quick, and high-precision jig setup, machine operating rates will increase. Please use this for product selection. [Contents] ■ Q-Lock Element Pin Type ■ Q-Lock Element Hole Type ■ Options *For more details, please refer to the PDF document or feel free to contact us.