伸栄産業 List of Products and Services

It excels in control, allowing for reduced takt time through acceleration control and multi-point stops.

The "RBS type" is a linear brake manufactured by Asahi Seiko Co., Ltd., featuring a structure where the friction plate and rail do not interfere with each other. It is a brake that directly holds the rail of the linear guide, maintained by the force of a spring and released by air pressure. It is a normal closed type (spring braking and reverse operation). Made in Japan, all models are tested for operation before delivery. 【Features】 ■ Spring retention, air release ■ Retention and positioning of the Z-axis (vertical axis), vibration prevention ■ Usable with rail in a joint configuration ■ Emergency stop in case of an emergency ■ Low backlash *For more details, please refer to the PDF materials or feel free to contact us.

Resin-based bearings They possess excellent wear resistance and strength even without lubrication oil, and are used in a wide variety of fields, including automotive parts, office equipment, construction machinery, hydro, thermal, and nuclear power generation facilities, high-speed vehicles, railway operations, and the construction of dome-shaped stadiums. Metal-based resin A high-performance sliding bearing material that solves problems in all sliding parts. Sliding bearings for various rotating machinery These are sliding bearings that support the rotating shafts of turbo machinery (steam turbines, gas turbines, generators, compressors, water turbines, pumps, superchargers, etc.) used in energy, chemical, water treatment plants, and large engines. Pumps Leveraging advanced research and technology developed in tribology, we also develop lubrication technology application products beyond bearings.

We heard from a manufacturer of factory equipment that "due to the Energy Conservation Act, inquiries about energy-saving equipment are increasing, but we cannot meet customer needs unless we convert existing products into energy-saving versions." This became our mission to develop products that respond to energy conservation. First, we measured the power consumption of existing equipment to identify points where energy savings could be achieved. Then, we incorporated energy-saving devices that our company handles into the key areas, and upon conducting further measurement experiments, it became clear that significant reductions in power consumption could be achieved. While the initial cost of manufacturing equipment slightly increases when adopting our energy-saving devices, we converted the benefits of adoption from power values to monetary amounts, allowing us to keep the running costs of the equipment low. Ultimately, we explained that the added value of the equipment would increase, leading to its formal adoption as a component incorporated into existing products. *For more details, please feel free to contact us.*

At Equipment Manufacturer A, there were considerations for a tabletop robot project involving multiple manufacturers, but they were struggling with decisions due to long lead times and high costs. Therefore, taking into account the customer's desired specifications, budget, and delivery time, we proposed IAI's tabletop solution. As a result, with the involvement of the manufacturer in sales efforts, we were able to shorten the delivery time and reduce costs. Additionally, we conducted an IAI study session within the customer's company, which they appreciated as it helped them better understand how to use the product. By leveraging our connections with various suppliers, we were able to make proposals that maximized benefits for the customer. *For more details, please feel free to contact us.*

At Company K, we were struggling because we couldn't consult with traditional trading companies about parts feeders. This time, we adopted a standard round parts feeder. The attachment part can be modified according to the workpiece. We handle several parts feeder manufacturers that can meet customer needs. We will accompany the suitable manufacturer to determine the detailed specifications and provide a quotation. [Concerns] ■ There are many types of workpieces, and separating the bowls would increase costs. ■ The flow of rubber products is poor, and even with inner surface treatment of the bowl, the sliding is inadequate. ■ We want to inspect dimensions while transporting. *For more details, please feel free to contact us.

Shin'ei Sangyo will assist you in solving various challenges such as cost-cutting and improving productivity that you may be facing. We received a request from Company P to provide a sample and propose a parts feeder. This time, we were able to connect the proposal for cost reduction through changing the direction of workpiece extraction with the customer's budget and delivery time, resulting in an order. Our company handles several parts feeder manufacturers that can meet customer needs. 【Case Study】 ■ Company P ■ Concerns and Consultations - Request for a proposal for a parts feeder - Design considering maintenance ■ Proposal and Results - Cost reduction through changing the direction of workpiece extraction - Order received due to accommodating customer budget and delivery time *For more details, please feel free to contact us.

1: Utilized for BCP business continuity planning 2: Double-sided adhesive fixation method for easy installation and relocation 3: Verified through high-performance seismic testing 4: Optimal selection for the environment and target objects 5: From consulting to installation

High peak pressure more than 3 times (compared to conventional) Air consumption reduced by 85%

<High Performance> Extremely thin with high thermal insulation effect Flexible and easy to install Can be cut with scissors or similar tools <Durability> Strong against acid, alkali, and electrical corrosion due to special surface treatment <Versatile> Rich lineup Can be used with various materials

Since it is a continuous type, there is no need for anchor bolts or drilling work! Equipment that is currently in operation can be fixed in place without moving it! It also accommodates layout changes, allowing for the reuse of products!

The turn nut uses a rear-in method, so attaching the included parts is easy!

This catalog introduces the protective system fences handled by Shin-ei Sangyo in a digest version. It features the "AS Series," as well as the "Profile Processing Number Table," "Connection Fittings," and "Simple Room Partitions." We offer a wide range of products with flexible combinations and free planning. [Contents (Excerpt)] ■ AS Series ■ MS Series ■ GS Series ■ Profile Processing Number Table ■ Calculation of Deflection * For more details, please refer to the PDF document or feel free to contact us. * This PDF document is a digest version. If you need the full version, please contact us.

This document is the instruction manual for the parts feeder 'PV Series' handled by Shin-Ei Industries. It includes safety precautions, names and dimensions of various parts, specifications, maintenance, and after-sales service. Please be sure to read it before use to ensure proper usage. 【Contents (excerpt)】 ■ Safety precautions ■ Names and dimensions of parts ■ Installation and operation ■ Adjustment ■ Specifications *For more details, please refer to the PDF document or feel free to contact us.

This document is a guide introducing the selection of servo valves. It includes requirements for typical applications in general industry, the selection of servo valves, the correct criteria for selecting servo valves, and important parameters to consider when selecting a servo valve. The explanations are made clear using diagrams and tables, so please take a moment to read it. 【Contents (excerpt)】 ■ Requirements for typical applications in general industry ■ Selection of servo valves ■ Correct criteria for selecting servo valves ■ Features of control using servo valves ■ Important parameters when selecting a servo valve *For more details, please refer to the PDF document or feel free to contact us.

The development and progress of hydraulic technology demand improvements in the performance of valves themselves, as well as promote the differentiation and integration of functions. This catalog describes standard forms among the numerous production and sales items, introducing a wide variety of models. Each form is fully series-structured, allowing you to use valves suitable for your system as needed. We hope this will be useful as hydraulic planning or design materials for our customers. Please adopt those of high value. 【Featured Products】 ■ Stop Valve ■ Double Throttling Stop Valve ■ Single Throttling Stop Valve ■ Check Stop Valve ■ Accumulator Main Valve *For more details, please refer to the PDF materials or feel free to contact us.

This catalog introduces our air and electric micrometer products. It features bestsellers like the compact and lightweight "CAG-3000" and "FT-5000" series. Please use this for selecting products. 【Featured Products】 ■CAG Series ■FT-5000 Series ■MD Series ■DAG-2000 Series ■DAG-2200 Series ■MG Series *For more details, please refer to the PDF document or feel free to contact us.

The power level and frequency response characteristics of the control system, which are two important parameters, must meet the conditions of the application. If the performance of the servo valve is overly generous, it may lead to higher costs or, conversely, a decrease in system performance. This document provides detailed information on "criteria for selecting the correct servo valve," "characteristics of control using servo valves," and "important parameters when selecting a servo valve." [Contents] ■ Criteria for selecting the correct servo valve ■ Characteristics of control using servo valves ■ Important parameters when selecting a servo valve ■ Selection procedure ■ Servo valve performance table ■ Servo valve control conditions *For more details, please refer to the PDF document or feel free to contact us.

This document is the instruction manual for the parts feeder PV series. It includes "Safety Precautions," "Names and Dimensions of Each Part," "Adjustment," "Installation and Operation," and "Specifications." Please be sure to read this instruction manual before use, and after reading, keep it in a place where it can be easily accessed at any time. [Contents] ■ Safety Precautions ■ Names and Dimensions of Each Part ■ Installation and Operation ■ Adjustment ■ Specifications *For more details, please refer to the PDF document or feel free to contact us.

The water-cooled "oil cooler" is a cooling device that releases no waste heat into the factory space and significantly reduces maintenance labor for condenser clogging. It controls the coolant temperature to ±0.1°C across the entire load range (from no load to 100% load), contributing to improved machining accuracy. The water-cooled oil cooler operates "without heat generation," removing waste heat from the oil cooler body using cooling water. 【Features】 ■ Directly mounted immersion-type oil cooler on the top of the coolant tank ■ High-precision type with inverter control of the compressor ■ Enables comfortable working conditions ■ Reduces air conditioning load in the factory, achieving energy savings ■ Demonstrates stable effectiveness even in factories requiring precise temperature management *For more details, please refer to the PDF document or feel free to contact us.

"Racfil" is a long-life filter for oil compressors that can be used as a countermeasure against clogging of cooling fins. The filter's microfibers effectively capture oil mist and dust, preventing clogging of the condenser cooling fins and eliminating the need for cleaning. The filter only needs to be replaced once a year, increasing the amount of mist that can be collected and achieving a long lifespan. Additionally, the replacement can be easily performed without tools. 【Features】 ■ No need to clean cooling fins ■ Filter replacement once a year ■ Reduced power consumption ■ Achieves maintenance-free cooling ■ Long lifespan *For more details, please refer to the PDF document or feel free to contact us.

The local dust collection arm series is a device designed to be used in conjunction with fans and ducts, primarily for pinpoint suction of welding fumes at the source of emission. The self-supporting flexible arm allows for adjustment of the hood's position according to the dust generation location, enabling the most efficient local dust collection tailored to the work area. Additionally, after use, the arm can be folded and stored compactly, ensuring it does not interfere with other tasks when dust is not being generated. This item is recommended for those considering the introduction of a local dust collection system or looking to enhance the operability of existing dust collection systems. 【Features】 ■ Pinpoint suction of welding fumes at the source of emission ■ The flexible arm allows for adjustment of the hood's position according to the dust generation location ■ Enables the most efficient local dust collection tailored to the work area ■ The arm can be folded and stored compactly after use *For more details, please refer to the PDF document or feel free to contact us.

This catalog features a wide range of electric actuator products. The "Batteryless Absolute Encoder Type" is an electric actuator that allows for restart from a stop position. Since the encoder retains position information even during power outages, there is no need for origin return when power is restored. In addition, we offer various products including the electric actuator/slider type ball screw drive "LEFS Series" and the electric actuator/slider type belt drive "LEFB Series." 【Featured Products】 ■LEFS Series ■LEFB Series ■LEY Series ■LEYG Series ■LESH Series *For more details, please refer to the PDF document or feel free to contact us.

The "ELEMENT series" is a product that can remove various contaminants that cannot be eliminated by general filters. It has low running costs and is easy to maintain. It provides benefits such as trouble prevention, productivity improvement, and lifespan extension for production lines and equipment manufacturers. You can choose according to your intended use. 【Features】 ■ Removes moisture and micron-sized solid contaminants ■ Suppresses and removes oxidation degradation products ■ Low running costs ■ Easy maintenance ■ Stable oil properties and cleanliness *For more details, please refer to the PDF document or feel free to contact us.

The streamer air purifier 'ACK55-W' is designed with both appearance and performance in mind. With a square form that subtly blends into your room, it features a slim tower design focused on everyday living, and a structure that considers operational noise. It provides powerful humidification that is kind to your skin, while effectively capturing dust over a wider area. We also offer a variety of other air purifiers in our lineup. 【Features】 ■ Powerful humidification that is kind to your skin ■ Captures dust over a wider area ■ Structure designed with consideration for operational noise ■ Slim tower design focused on everyday living ■ Connects with various devices for added convenience ■ Quickly and powerfully captures dirt and odors *For more details, please refer to the PDF document or feel free to contact us.

The "HRS Series" is a lightweight and compact circulating liquid temperature control device/thermochiller with a temperature stability of ±0.1℃. It features a heating function and utilizes waste heat for heating, eliminating the need for a heater. The power supply is compatible with the EU, Asia, Oceania, North America, and South America. 【Features】 ■ Heating function ■ Self-diagnosis function and inspection screen ■ 35 types of individual alarm codes ■ Communication function ■ Easy maintenance *For more details, please refer to the PDF document or feel free to contact us.

Even if the temperature is the same, moving from the sun to the shade feels cooler. This is because some of the electromagnetic waves (radiant heat) from the sun are cut off. The "High-Performance Heat Shielding Sheet" cuts off almost all radiant heat, making buildings extremely comfortable in the summer by providing ample shade, and warm in the winter by retaining indoor heat. It is recommended for installation under roofs, in attics, and around high-temperature equipment such as furnaces. 【Features】 ■ Sustained high heat shielding effect ■ Lightweight and ultra-thin yet high strength ■ Easy to install with cutters, etc. ■ Special surface treatment (corrosion prevention, UV protection, etc.) ■ Rich lineup (fireproof certification, condensation prevention, high-temperature use, etc.) *For more details, please refer to the PDF materials or feel free to contact us.

The "IZS40/41/42 Series" is an ionizer with a potential amplitude of 25V or less and a fast discharge time of 0.1 seconds. We offer options such as the "Dual AC Type," which reduces the potential amplitude of the workpiece by adopting a dual AC method, and the "Feedback Sensor Type," which enables fast discharge using a feedback sensor. It is an energy-efficient, high-efficiency cartridge. 【Lineup】 ■ Dual AC Type IZS42 Series - Reduces the potential amplitude of the workpiece by adopting a dual AC method. ■ Feedback Sensor Type IZS41 Series - Fast discharge using a feedback sensor. ■ Standard Type IZS40 Series - Simple operation, usable just by turning on the power. *For more details, please refer to the PDF materials or feel free to contact us.

"Aqualem" is a cleaner that decomposes and cleans a wide range of organic dirt based on industrial oils through the action of bio-surfactants. It uses food-grade ingredients that do not damage the material being cleaned and are considerate of human health and the environment. Leveraging bio-cleaning technology, it employs microorganisms and enzymes to break down fats, fuels, greases, and glycols into water and carbon dioxide, allowing for easy removal. In addition, we also offer products such as "Aqua Stain Remover," "Aqua Mousse Cleaner," and "Aqua Clean Powder." 【Features】 ■ Concentrated type for economic use ■ Breaks down oil into water and carbon dioxide using the power of microorganisms and enzymes ■ Quickly penetrates oil, decomposes it, and leaves no residue on the surface ■ Unlike degreasers and dispersants, it does not emulsify fats or allow re-adhesion ■ U.S. EPA safety certified, with no impact on humans, animals, plants, or ecosystems ■ The cleaner is neutral and can be used on any hard surface that does not repel water *For more details, please refer to the PDF materials or feel free to contact us.

The remote system is a system that allows for simultaneous wireless power supply and signal transmission. It consists of an output unit (base unit) and a transmission unit (remote unit). On the fixed side, the output unit is connected to power and control devices, while on the movable side, input devices such as proximity, photoelectric, and temperature sensors, as well as output devices like solenoid valves, are connected, enabling wireless input and output control. We offer a wide range of products. 【Remote Sensor System Lineup (Excerpt)】 ■ Switch Signal Transmission - DC 3-wire type - DC 2-wire type ■ Analog Signal Transmission - Thermocouples J and K - Temperature Resistance Sensors Pt100 *For more details, please refer to the PDF materials or feel free to contact us.

Shin'ei Sangyo Co., Ltd. handles the "Self-aligning Roller Bearing Unit" manufactured by FHY. Our integrated type product has adapted to a wide range of harsh usage conditions and has supported the industrial sector. Although the integrated unit is still not very familiar in Japan, it offers many advantages compared to the traditionally used plummer blocks, such as a larger self-aligning angle, ease of installation, and convenient maintenance. 【Features】 ■ Excellent resistance to low and high temperatures, extreme pressure, and wear ■ Maintains rust prevention effects over a long period due to superior water resistance ■ The triple seal ensures constant contact for dust protection, regardless of the alignment angle of the inner ring ■ Fixed type and movable type are distinguished by the color of the tag ■ By moving the snap ring located on the back of the unit, it can be easily changed from fixed type to movable type *For more details, please refer to the PDF document or feel free to contact us.

"Additional processing" refers to the processing added to the material, and we call the processing tailored to the customer's usage "tsuikakou." Sprockets, timing pulleys, gears, etc., cannot be used in their raw material form; processing tailored to the customer's usage is necessary. We do not discriminate against the types of transmission components. If you require inner diameter machining, milling, tapping, or keyway machining, we can accommodate your needs. In addition to additional processing, we also accept custom orders to meet customer requests. [Types of Processing] ■ Inner diameter processing by lathe: Processing is performed to match the shaft diameter. ■ Thread hole (tapping) processing: Processing is performed to secure the shaft. ■ Keyway cutting: Processing is performed to secure with a machine key. *For more details, please refer to the PDF document or feel free to contact us.

This document is the specification sheet for the linear rails 'SBI-FL type / SBI-FLL type' manufactured by SBC, handled by Shin-Ei Sangyo Co., Ltd. Due to the arrangement of balls at a contact angle of 45°, the four-directional load acting on the block is the same as the rated load, allowing for use in various orientations. Ultra-high load capacity, low noise, high rigidity, and smooth operation have been achieved. This document summarizes "assembly dimensions," "block dimensions," "rail dimensions," etc., for each model number. Please take a moment to read it. 【Features】 ■ Four-directional rated load ■ Low noise and high load capacity ■ Free nipple mounting ■ Replaceable ■ Aligned ball circulation ■ Rail tap specification *For more details, please refer to the PDF document or feel free to contact us.

Shin'ei Sangyo Co., Ltd. handles the Mecalock "MF Series" manufactured by Aisel. It eliminates the need for bearing retaining collars, reducing the number of parts. Boss-less pulleys can be used, and the hub only requires through-hole processing. Additionally, since it allows for stop fitting, assembly is easy and time-saving. 【Features】 - No need for bearing retaining collars - Compact design possible - Reduction in the number of parts and assembly work - Boss-less hubs can be utilized - Gears, pulleys, sprockets, etc., can be used *For more details, please refer to the PDF materials or feel free to contact us.

The "Clean Level Tower" is an aluminum flange liquid level gauge manufactured by Koike Engineering and Service Co., designed to be mounted on the top of a tank for excellent visibility, allowing the liquid level to be easily checked from any direction at a glance. While maintaining outstanding "visibility," it pursues "strength" and "durability." The use of an aluminum flange and four outer tie rods significantly enhances durability. It prevents damage to the main body, allowing for long-term, worry-free use in manufacturing environments. 【Features】 ■ Aluminum flange adopted ■ Pipe damage prevention structure ■ Sealed structure that prevents fogging ■ Easy to replace *For more details, please refer to the PDF document or feel free to contact us.

The "FP/FQ model" is a pull-stud clamp manufactured by Cosmech that allows for simultaneous machining of five sides (process consolidation), excluding the seating surface. It removes foreign objects from the top surface and pull bolts using air blow. The pull bolts are drawn in and clamped through hydraulic supply. It can be used for high-precision five-sided machining of workpieces with many inclined or curved surfaces where external clamping is difficult, and for quick workpiece changes by attaching the pull bolts to the clamp rod. 【Features】 ■ Clamping that draws in pull bolts using through holes or threaded holes in the workpiece ■ Simultaneous machining of five sides (process consolidation) excluding the seating surface ■ Removal of foreign objects from the top surface and pull bolts using air blow ■ Clamping by drawing in pull bolts through hydraulic supply *For more details, please refer to the PDF document or feel free to contact us.

This catalog is a comprehensive catalog of small compressors handled by Shin-ei Sangyo Co., Ltd., from Kobelco Compressors. It includes the "Kobelion-VS・SG," which condenses the high performance and high functionality of the Kobelion series into a compact model, as well as the standard small compressors "Sukesan" and "March," which pursue simple operability and efficiency. Please use this for selecting products. [Contents] ■ Oil-injected 7.5–15 kW CLASS ■ Oil-free 1.5–3.7 kW CLASS ■ Oil-free 5.5–15 kW CLASS ■ Oil-injected 1.5–5.5 kW CLASS *For more details, please refer to the PDF document or feel free to contact us.

The "LHBG Series" is a linear guide hand manufactured by Kondo Seisakusho, which is lower in price and lighter than conventional products. It comes with a rubber cover that enhances environmental resistance. The mounting dimensions for standard, rubber cover specifications, and single-acting (NO/NC) are all the same. As an option, it can also accommodate specifications for food manufacturing processes, using food machine grease (NSF H1), and the rubber cover can be selected in light blue silicone. 【Features】 ■ Enhanced environmental resistance with rubber cover ■ Heat-resistant and oil-resistant rubber cover available (optional) ■ Standard, rubber cover specifications, and single-acting (NO/NC) mounting dimensions are all the same ■ Sensors compatible with cutting fluid can be installed (special adaptation) ■ Lower price and lighter than conventional products ■ Specifications for food manufacturing processes (optional) *For more details, please refer to the PDF materials or feel free to contact us.

This catalog is a lineup catalog of general-purpose automatic control devices manufactured by Saginomiya Seisakusho, handled by Shin-ei Sangyo Co., Ltd. It features products such as thermostats capable of controlling temperatures for air, water, steam, and oil, as well as humidistats and pressure switches. We also provide detailed information on their applications and characteristics. Additionally, we include control devices for refrigeration and air conditioning systems that are compatible with new refrigerants, taking into consideration the global environment. Please use this for selecting products. [Contents (excerpt)] ■ Thermostats ■ Humidistats ■ Pressure switches ■ Flow switches ■ Valves *For more details, please refer to the PDF document or feel free to contact us.

"DICE SLIDE" is a high-load, oil-free bearing made from a copper alloy base and embedded with carefully selected solid lubricants. Depending on the application and usage conditions, the base metal and plug can be selected. It can be used over a wide temperature range from low to high temperatures. It has excellent corrosion resistance and chemical resistance, making it suitable for use in river water, seawater, and in liquids or gases where the chemical resistance of the metal base and solid lubricants is required, particularly in hard-to-lubricate areas. 【Features】 ■ Maintenance-free with no need for lubrication ■ Extremely excellent wear resistance ■ Low friction coefficient ■ Usable over a wide temperature range from low to high ■ Free design for shape and size *For more details, please refer to the PDF materials or feel free to contact us.

This catalog is a comprehensive catalog featuring measuring instruments and hydraulic and water pressure accessories handled by Shin-ei Sangyo Co., Ltd., manufactured by ASK Corporation. It introduces "measuring instruments" such as digital pressure switches, digital flow sensors, and pressure gauges, as well as "hydraulic accessories" and "water pressure accessories (SUS specifications)." Please use it for selecting products. [Contents] ■ Measuring Instruments ■ Hydraulic Accessories ■ Water Pressure Accessories (SUS Specifications) *For more details, please refer to the PDF document or feel free to contact us.

This catalog is a comprehensive catalog featuring the electric cylinders manufactured by IAI Corporation, handled by Shin-ei Sangyo Co., Ltd. It includes "application examples" such as lamp shade painting equipment and devices for sprinkling syrup on donuts, as well as a specification list for sliders, rods, and tables. Please use it to assist in selecting products. [Contents (excerpt)] ■ Notes ■ Ten Points of Delight ■ Application Examples ■ Specification List ■ How to Read the Catalog *For more details, please refer to the PDF materials or feel free to contact us.

This catalog features fittings from Aoi Corporation handled by Shin-ei Sangyo Co., Ltd. It introduces the "Stainless Steel Compression Fitting Series," including half unions and elbow unions, as well as the "Brass Compression Fitting Series" and the "Stainless Steel Miniature Fitting Series." Additionally, it includes the "Plastic Tube Series" made of nylon, fluorine, and polyether ester. Please use this for selecting products. [Contents (Excerpt)] ■ Stainless Steel Compression Fitting Series ■ Brass Compression Fitting Series ■ Stainless Steel Coupling A Series ■ Stainless Steel Speed Controller Series ■ Stainless Steel Needle Valve Series *For more details, please refer to the PDF document or feel free to contact us.

This catalog features standard pneumatic equipment manufactured by Azbil TACO, handled by Shin-Ei Sangyo Co., Ltd. It introduces products such as "One-Touch Tube Fittings / One-Touch Connection Speed Controllers," which are used for transmitting pressure air between devices, such as between a 5-port solenoid valve and an air cylinder, and can be easily secured by simply inserting the plastic tube into the fittings. Please use this for selecting products. [Contents (excerpt)] ■ Azbil TACO 60 Series Modular FRL ■ Norgren FRL Selection ■ Azbil TACO FRL Classics ■ One-Touch Tube Fittings / One-Touch Connection Speed Controllers ■ 60 Series Modular FRL Products *For more details, please refer to the PDF materials or feel free to contact us.

The "SL Series" is a heat exchanger handled by Shin-ei Sangyo Co., Ltd., manufactured by Kamoi Sangyo Co., Ltd. It is designed for clean water, and the standard coating color is dark green. The maximum operating pressure is 0.98 MPaG for the shell side and 0.49 MPaG for the tube side. We also manufacture a type with a bypass circuit inside the tube bundle (indicated by "-R" at the end of the model number). Please feel free to contact us when placing an order. 【Features】 ■ For clean water ■ Patented (Japan, USA, Taiwan) ■ Maximum operating pressure: 0.98 MPaG for the shell side, 0.49 MPaG for the tube side ■ Standard coating color: dark green ■ A type with a bypass circuit inside the tube bundle (indicated by "-R" at the end of the model number) is also available *For more details, please refer to the PDF document or feel free to contact us.