コルテック List of Products and Services

The "CX-310A" is a roll-type sheet slitter that can cut without unrolling. With the CX-310A's saw blade, it is capable of cutting various materials, including textile fabrics, interlinings, non-woven fabrics, and fiberglass. By equipping it with a high-speed motor for front, back, left, and right movement, the production volume has increased by 1.5 to 2 times compared to conventional machines. The cutting speed automatically converts in three stages. It can also be used as a grinding machine (double-edged grinder). Additionally, with automatic detection of the raw material diameter, it cuts even when the diameter changes. This helps shorten cycle times and prevents accidents due to forgotten adjustments. (Patent registered) 【Features】 ■ High-speed motor for front, back, left, and right movement ■ Automatic detection of raw material diameter ■ Three-stage automatic conversion of cutting speed ■ Automatic chuck ■ Automatic lifting of shaft support (air-operated) *We also offer modifications and development according to your requests, so please feel free to consult with us. ★ We are also accepting online meetings (Skype) at any time, so please feel free to contact us. *For more details, please refer to the PDF document or feel free to inquire.

The "CC Series" is a cutter (double-edged grinding machine) designed for cutting large diameter rolls. It eliminates dimensional errors caused by blade wobble, resulting in a straight finish without welding on the cut surface. Even if the diameter of the raw material changes, the cutter's stroke length is automatically adjusted, eliminating unnecessary movements and significantly reducing cutting time. It is equipped with a grinding device, allowing for sharpening without removing the circular blade. The cutting surface is always beautifully finished. The rotation of the chip saw (cutter) can be selected as drive, free, or fixed, allowing for optimal cutting conditions. 【Features】 ■ The forward stop position is automatically adjusted even if the diameter of the circular blade changes due to grinding, etc. ■ Cutting dimensions and the number of cuts can be set with a single touch on the color LCD touch panel. ■ When not in operation, the circular blade is stored within a safety cover. ■ The shaft support rod is automatically raised and lowered. ■ Double and triple safety measures. ★ We also accept online meetings (Skype) at any time, so please feel free to contact us. * For more details, please refer to the catalog or feel free to inquire.

The "CC-300A" is a device that cuts with a stroke even when the diameter of the raw material changes, enabling a reduction in cycle time and preventing accidents caused by forgetting adjustments. The cutting speed of the chip saw automatically shifts through three stages. It gradually speeds up from a slow start and then decelerates again during paper tube cutting, resulting in a beautifully finished cut surface. Even if the diameter of the round blade changes due to grinding, the forward stop position is automatically adjusted, ensuring a clean cut to the paper tube. Additionally, the grinding device uses borazon grinding stones, making it an economical, efficient, and heat-resistant grinding machine (double-edged grinding machine). 【Features】 ■ Automatically detects the end of the raw material and moves to the start position for operation. ■ Easy operation for adjusting grinding angles and positions. ■ Dimension and quantity settings can be done with a one-touch operation on the LCD panel. ■ Operation switches are consolidated at the operator's fingertips. ■ Double and triple safety measures. ★ We also accept online meetings (Skype) at any time, so please feel free to contact us. * For more details, please refer to the catalog or feel free to inquire.

The "CA-320A" is a compactly designed roll cutter that takes up less space compared to conventional fully automatic models. It can also switch to semi-automatic operation, allowing for agile maneuverability. The cutter (chip saw) and chuck rotation are controlled by an inverter, enabling stepless speed variation. Additionally, it can be used as a double-edged grinding machine. Adjustments for grinding angle and position, as well as cut dimensions and quantities, can be made with a single touch, making it easy for anyone to operate. 【Features】 ■ Compact design ■ Switchable to semi-automatic operation ■ Reduced cut cycle time ■ Grinding device uses borazon grinding wheels (long-lasting) ■ Adjustments and settings can be done with a single touch, making it easy for anyone to operate ★ We also accept online meetings (Skype) at any time, so please feel free to contact us. * For more details, please refer to the catalog or feel free to inquire.

The "CM-330S" is a semi-automatic roll cutter (double-edged grinding machine) that uses borazon grinding wheels, offering excellent economy, efficiency, and heat resistance. The rotation of the cutter and chuck is infinitely variable through inverter control. The shaft is custom-made to fit paper tubes, ensuring there is no rotational wobble of the raw material. In addition to adjusting the grinding angle and position, the operation of the shaft indicator rod and the replacement of the chuck's outer claws can be done with a single touch. The operation switches are centralized at the operator's hand, and the cutting dimensions can be easily input via a touch panel. Furthermore, it is equipped with safety features that automatically stop the machine if an abnormal load is detected on the cutter or chuck. 【Features】 ■ Excellent economy (long-lasting durability) ■ Excellent efficiency (reduced grinding time, less prone to clogging) ■ Excellent heat resistance (capable of long grinding sessions) ■ Various adjustments and operations can be performed with a single touch ■ Double and triple safety measures ★ We also accept online meetings (Skype) at any time, so please feel free to contact us. * For more details, please refer to the catalog or feel free to inquire.

The "CX-310A" is a fully automatic high-speed roll cutter (roll slitter) equipped with high-speed motors for movement in all directions. It cuts with a stroke even when the diameter of the raw material changes, reducing cycle time and preventing accidents caused by forgetting adjustments. With a three-stage automatic conversion of the cutting speed of the chip saw (cutter), it starts cutting slowly and gradually speeds up. When cutting paper tubes, it slows down again, and after cutting, it retracts at high speed. Additionally, it automatically detects the width of the raw material end, and dimension and quantity settings can also be done with a single touch, which is one of its features. [Features] ■ High-speed motors for movement in all directions ■ Automatic detection of raw material diameter ■ Three-stage automatic conversion of cutting speed ■ Automatic chuck included ■ Automatic lifting and lowering of shaft supports ★ We are also accepting online meetings (Skype) at any time, so please feel free to contact us. * For more details, please refer to the catalog or feel free to inquire.

The "CX-310A" is a fully automatic high-speed roll cutter equipped with a high-speed motor, achieving a significant increase in productivity compared to conventional machines. It can automatically detect the diameter of the raw material and cut with the shortest stroke for each. This contributes to reducing cycle time and preventing accidents due to forgotten adjustments. It can also be used as a replacement for slitter machines, meeting needs such as "not wanting to open the roll," "wanting to keep initial costs down," and "wanting to shorten processes." 【Features】 ■ Simultaneous opening and closing of inner and outer claws with the push of a button ■ Automatic raising and lowering of the shaft with the push of a button ■ Automatic conversion of cutting speed in three stages ■ Equipped with an automatic sharpening device ■ Easy-to-use color LCD panel ■ Automatic detection of the edge of the raw material ★ We are also accepting online meetings (Skype) at any time, so please feel free to contact us. * For more details, please refer to the materials. Feel free to reach out with any inquiries.

This document introduces the differences between roll cutters and slitters. A roll cutter is a machine that processes materials into circular slices. A slitter is a machine that draws out roll-shaped materials and cuts them using freely rotating circular blades or fixed blades, then rewinds them. A list of handled products and compatible materials is also included. 【Contents】 ■ What is a roll cutter? ■ What is a slitter? ■ List of handled products ■ List of compatible materials ■ Frequently Asked Questions (Q&A) ■ Contact information ★ We will be showcasing a 'new model of automatic winding machine' at the "10th Advanced Functional Film Exhibition" starting on December 4th. Please refer to the basic information for details about the exhibition. ★ We are also accepting online meetings (via Skype) at any time, so feel free to contact us. * For more details, please refer to the PDF document or feel free to reach out to us.

Cortech Co., Ltd. is a company primarily engaged in the manufacturing and sales of rotary slitting machines, winding machines, various cutting machines, bias tape manufacturing machines, and automatic sewing equipment. This time, we would like to introduce a machine that can cut non-woven fabric. 【Features of the CC Series】 - The forward stop position is automatically adjusted even if the diameter of the round blade changes due to grinding, etc. - Cutting dimensions and the number of cuts can be set with a single touch on a color LCD touch panel. - The round blade is stored inside a safety cover when not in operation. - The shaft support rod is automatically raised and lowered. - Double and triple safety measures are in place. - Capable of cutting raw materials with a maximum diameter of φ1000. 【Features of the CX-310A】 - High-speed motors are installed in the front, back, left, and right. - Automatic detection and grinding of raw material diameter. - Cutting speed automatically changes in three stages. - Equipped with an automatic chuck. - Shaft support automatically raises and lowers. 【Features of the CR-1600R (Winding Machine)】 Active in winding various materials! - Inverter control prevents sudden pulling. - Air shafts are used for the unwinding and winding axes. - The electric ear alignment device ensures neat winding. - Optional products such as static electricity removal devices are also available. *For more details, please refer to the catalog or feel free to contact us.

We offer a lease purchase plan at our company. All Cortech machines are eligible, and no substantial funds are required for leasing. With comprehensive property insurance that covers damages from accidental incidents such as fire and water disasters, you can use the equipment with peace of mind. The application process is simple, and lease estimates are free. Please feel free to contact us when you need assistance. 【Features】 ■ Preserve cash on hand ■ Full expense deduction ■ Comprehensive property insurance included ■ Simple application process ■ Free lease estimates *For more details, please refer to the PDF document or feel free to contact us.

The "CC-500F" is a fully automatic high-speed film roll cutter equipped with high-speed motors for movement in all directions. The cutting speed automatically transitions through three stages, starting slowly and gradually speeding up, then slowing down again during paper tube cutting, and finally retreating at maximum speed after the cut. Additionally, air is injected during cutting to prevent the saw blade from clogging. 【Features】 ■ Prevents the welding of raw materials ■ Automatically detects the edges of raw materials ■ Automatic deceleration of cutting speed on the chuck side ■ Production volume increases by 1.5 to 2 times compared to conventional machines ■ The saw blade has a unique structure, ensuring confidence in the finish *For more details, please refer to the PDF document or feel free to contact us.

The "CC-1000F" is a fully automatic high-speed film roll cutter equipped with high-speed motors for front, back, left, and right movement, increasing production volume by 1.5 to 2 times compared to conventional machines. The machine dimensions are D3,500×W3,300×H2,300, with a total weight of 2,000 kg. It offers 5 types of dimension and quantity settings (custom options available for any number of types), and settings can be made with a single touch using a 10-inch color LCD touch panel. Additionally, we provide various options that enhance work efficiency. 【Features】 ■ Production volume increased by 1.5 to 2 times compared to conventional machines ■ Cutting speed automatically changes in three stages ■ Chip saw blade: unique structure ensures high-quality finishing ■ Mechanical shaft: opens and closes with the push of a button ■ Automatic deceleration of cutting speed on the chuck side *For more details, please refer to the PDF document or feel free to contact us.

This is an automatic high-speed roll cutter and an automatic paper tube cutting machine's raw material automatic loading and unloading device. Automation of the roll cutter and paper tube cutting machine is possible, utilizing a 2-axis turret system (1-axis is also possible). It can stock approximately 10 rolls of raw material, and the finished products can be in either box type or conveyor type. 【Features】 - Can stock approximately 10 rolls of raw material (customizable) - Finished products can be in either box type or conveyor type - Equipped with automatic measurement functions for raw material diameter and width *For more details, please contact us.

We are pleased to announce that Cortec has been selected as one of the "Top 100 Companies Representing Sakai and Senshu." This achievement is entirely due to the warm support and cooperation from all of you, for which we are deeply grateful. You can find more details through the link provided on our company website. *For more information, please refer to the related links or feel free to contact us.