V-net AAEON List of Products and Services

Features: ● 10/100/1000Base-T(X) x1, 10/100/1000Base-T(X) Port in M12 Auto MDI/MDIX x1 ● Compliant with IEEE802.3at/802.3af ● Supports automatic speed negotiation and MDI/MDI-X auto adaptation ● Equipped with automatic protection against overvoltage input and overcurrent output ● Output power 30W ● Input power supply 12–57Vdc

Features ● Equipped with 8 ports of 10/100/1000Base-T(X) PoE (P.S.E.) and 2 ports of 100/1000Base-X (SFP) ● PoE ports compliant with IEEE 802.3af/at (maximum 180W (30W/port)) ● Supports auto-negotiation and auto MDI/MDI-X ● Supports store-and-forward forwarding ● Supports flow control ● System warning settings possible with relay output ● Slim type housing compliant with IP-30 ● Can be mounted on DIN rail and wall mount

Features ● 12 ports of 10/100Base-T(X) PoE (P.S.E.) and 4 ports of 10/100/1000Base-T(X) ● PoE ports compliant with IEEE 802.3af/at (up to 15.4/30W per port) ● Supports the latest IPV6 Internet Protocol version ● Automatic prevention of DOS/DDOS attacks ● IP-54 compliant waterproof design ● Wall mountable

The industrial PoE switch is equipped with the following features: ● Achieves recovery time of less than 30ms even for connections with over 250 units using redundant ring O-Ring and MSTP (RSTP/STP compatible) ● Supports ring technology from other vendors in an open architecture ● Allows the creation of multiple redundant network rings with O-Chain ● Supports standard IEC 62439-2 MRP functionality ● Complies with IEEE 802.3at, PoE 30W (maximum) ● Supports PoE alive check and automatic reboot functionality ● Supports the latest version of the IPV6 internet protocol ● Supports Modbus TCP protocol ● HTTPS/SSH protocol ● Compatible with SMTP client and NTP server protocols ● Supports device binding security features ● Automatic prevention of DOS/DDOS attacks ● IGMP v2/v3 (IGMP snooping compatible) ● Supports ACL, TACACS+, and 802.1x authentication ● Supports jumbo frames up to 9K Bytes ● Supports DDM functionality ● Supports LLDP protocol ● Rack mountable

Features ● Equipped with 8 ports of 10/100/1000Base-T(X) PoE (P.S.E.) ● Equipped with 4 ports of 100/1000Base-X, SFP ● Compliant with IEEE 802.3at P.S.E ports supporting up to 30W per port ● SFP ports support 100Base-FX and 1000Base-X speeds ● Auto-negotiation and auto MDI/MDI-X support ● Store and forward transmission support ● Redundant power input support ● Flow control support ● Housing compliant with IP-30

Features ● Equipped with 8 ports of 10/100/1000Base-T(X) PoE (P.S.E.) ● Equipped with 4 ports of 100/1000Base-X, SFP ● Compliant with IEEE 802.3at P.S.E ports supporting up to 30W per port ● SFP ports support 100Base-FX and 1000Base-X speeds ● Auto-negotiation and auto MDI/MDI-X support ● Store-and-forward transmission support ● Redundant power input support ● Flow control support ● Housing compliant with IP-30 ● DIN rail and wall mount installation support

Features ● PoE input and data output ports support 10/100/1000Base-T(X) ● Compliant with IEEE802.3at ● Overvoltage input protection and overcurrent output protection included ● Supports a maximum power output of 60W/24VDC ● PoE mode management can be set via DIP switch ● Housing complies with IP-30 ● Compatible with DIN rail and wall mount installation

Features ● Equipped with 1 port of 10 / 100 / 1000Base-T(X) PoE++ injector ● Compliant with IEEE802.3at/802.3af ● Overvoltage input protection and overcurrent output protection included ● Supports up to 60W power output on all ports (when input is DC24~57V) ● Supports DC9~57V input ● PoE mode selection available via DIP switch ● Housing compliant with IP-30 ● Compatible with DIN rail and wall mount installation

The industrial gigabit PoE splitter has the following features: ● Compliant with IEEE802.3at ● Supports PoE In and Data Out for 10/100/1000Base-T(X) ● Short circuit protection and power isolation for power output ● Automatic protection against overvoltage input ● Capable of a maximum power output of 21 watts ● Housing complies with IP-30 ● Compatible with DIN rail mount and wall mount

This is an injector with the following features: ● Equipped with 10/100/1000Base-T(X) × 2 ports for power and data output ● Compliant with IEEE802.3at/802.3af ● Capable of providing up to 30W of power output with a 50VDC input ● The enclosure complies with IP-30 ● Can be mounted on DIN rails and walls

This is an injector with the following features: ● Equipped with 10/100/1000Base-T(X) × 2 ports for power and data output ● Compliant with IEEE802.3at/802.3af ● Automatically protects against overvoltage input and overcurrent output ● Capable of providing a total power output of up to 90W ● Input voltage supports 50Vdc to 57Vdc ● Housing complies with IP-30 ● Can be mounted on DIN rails and walls

This is an injector with the following features: ● Equipped with 10/100/1000Base-T(X) × 2 ports for power and data output ● Compliant with IEEE802.3at/802.3af ● Automatically protects against overvoltage input and overcurrent output ● Capable of providing a total power output of up to 90W ● Input voltage supports 24Vdc to 50Vdc ● Housing complies with IP-30 ● Can be mounted on DIN rails and walls

The industrial gigabit PoE++ injector has the following features: ● 1 port supporting 10/100/1000Base-T(X) ● Compliant with IEEE802.3at/802.3af ● Overvoltage input protection and overcurrent output protection included ● Supports a maximum power output of 60W on all ports ● PoE mode management can be set via DIP switch ● Housing complies with IP-30 ● Compatible with DIN rail and wall mount installation

This is an Ethernet switch equipped with the following features: ● 8 ports of 10/100Base-T(X) PoE (P.S.E.) ● PoE ports compliant with IEEE 802.3at (maximum 180W (30W/port)) ● Auto-negotiation and Auto MDI/MDI-X support ● Store and forward forwarding support ● Flow control support ● System warning settings possible with relay output ● Slim type with IP-30 compliant housing ● Mountable on DIN rail and wall

This is an Ethernet switch with the following features: ● 10/100Base-T(X) PoE (P.S.E.) × 8 ports ● IEEE 802.3at compliant PoE ports (up to 30W/port, total 120W) ● Dual power supply supporting 24VDC input ● Auto-negotiation and Auto MDI/MDI-X support ● Store and forward forwarding support ● Flow control support ● System warning settings possible with relay output ● Slim housing compliant with IP-30 ● DIN rail mountable and wall mountable

This is an Ethernet switch with the following features: ● 4 ports of 10/100Base-T(X) PoE (P.S.E.) ● 2 ports of 100Base-FX single/multi-mode fiber ● PoE ports compliant with IEEE 802.3at (up to 30W per port) ● Auto-negotiation and auto MDI/MDI-X support ● Store and forward transmission support ● Flow control support ● System warning settings possible with relay output ● Slim type housing compliant with IP-30 ● DIN rail and wall mount installation possible

This is an Ethernet switch with the following features: ● 10/100Base-T(X) PoE (P.S.E.) × 4 ports ● 100Base-FX multi/single mode optical ports × 2 ports ● IEEE 802.3at compliant PoE ports (up to 30W/port) ● Auto-negotiation and Auto MDI/MDI-X support ● Store and forward forwarding support ● Flow control support ● Relay output for system warning construction ● Slim type housing compliant with IP-30 ● DIN rail and wall mountable

This is an Ethernet switch with the following features: ● 4 ports of 10/100/1000Base-T(X) PoE (P.S.E.) ● P.S.E ports compliant with IEEE 802.3at (up to 30W/port) ● Supports jumbo frames up to 9KBytes ● SFP ports compatible with 100Base-FX and 1000Base-X ● Auto-negotiation and Auto MDI/MDI-X support ● Store and forward forwarding support ● Flow control support ● Housing compliant with IP-30 ● Compatible with DIN rail and wall mount installation

This is an Ethernet switch with the following features: ● Equipped with 4 ports of 10/100/1000Base-T(X) PoE (P.S.E.) ● P.S.E. ports compliant with IEEE 802.3at, supporting up to 30W per port ● Supports jumbo frames up to 9K Bytes ● SFP ports support 100Base-FX and 1000Base-X speeds ● Auto-negotiation and auto MDI/MDI-X support ● Store-and-forward transmission support ● Dual 24VDC power input support ● Flow control support ● Housing compliant with IP-30 ● Compatible with DIN rail and wall mount installation

This is a PoE injector with the following features: ● Equipped with 10/100/1000Base-T(X) × 2 ports for power and data output ● Compliant with IEEE802.3at/802.3af ● Supports up to 30W output per port at 50VDC ● Compatible with 24V DC to 50V DC power input ● Housing compliant with IP-30 ● Supports DIN rail and rack mounting

This is an Ethernet switch with the following features: ● 8 ports of 10/100Base-T(X) P.S.E., 2 Gigabit combo SFP ports ● Supports 24V input ● Redundant ring O-Ring achieves recovery time of less than 10ms even for connections with over 250 units ● Compliant with IEEE 802.3af 15.4Watts PoE standard ● Supports STP/RSTP/MSTP ● Equipped with Gigabit combo ports ● IP-30 compliant housing ● DIN rail and wall mount compatible ● Supports LLDP protocol ● PTP client clock synchronization support ● Port tracking support ● SNMP v1/v2c/v3 support ● IGMP v2/v3 support ● RMON support, etc.

This is an industrial Ethernet switch with the following features: ● Supports 24V ● Equipped with 4 ports of 10/100/1000Base-T(X) PoE (P.S.E.) ● P.S.E. ports comply with IEEE802.3at, capable of supplying up to 30W per port ● Equipped with SFP ports compatible with 100Base-FX and 1000Base-X ● Supports auto-negotiation and auto MDI/MDI-X ● Supports store-and-forward transmission method ● Redundant power supply with 12–36VDC input support ● Supports flow control ● IP-30 compliant housing ● Compatible with DIN rail and wall mounting

This is an industrial Ethernet switch with the following features: ● Equipped with 4 ports of 10/100/1000Base-T(X) PoE (P.S.E.) ● P.S.E. ports comply with IEEE802.3at, capable of supplying up to 30W per port ● Includes SFP ports compatible with 100Base-FX and 1000Base-X ● Supports auto-negotiation and auto MDI/MDI-X ● Supports store-and-forward transmission method ● Supports flow control ● IP-30 compliant housing ● Compatible with DIN rail and wall mounting

Features: ● Equipped with 8 ports of 8x10/100/1000Base-T(X) PoE (P.S.E.) ● P.S.E. ports comply with IEEE802.3at, capable of supplying up to 30W per port ● Supports multi-power input of 12~57VDC ● Auto-negotiation and auto MDI/MDI-X compatible ● Supports store-and-forward transmission method ● Supports flow control ● IP-30 compliant housing ● Compatible with DIN rail and wall mount

This is an industrial-grade simple management Ethernet switch with the following features: ● 4 ports of 10/100Base-T(X) P.S.E. and 2 ports of 10/100Base-T(X) ● Recovery time of less than 10ms even for connections with over 250 units using redundant ring O-Ring ● Compatible with other companies' ring technologies via Open-Ring ● Supports multiple redundant rings with O-Chain ● Compatible with STP/RSTP ● Secure network management possible with SNMP v1/v2c/v3 ● Supports LLDP protocol ● Event occurrence possible via Syslog, email, SNMP, and relay output ● Various settings can be configured via web-based interface or Windows Utility (Open-Vision) ● P.S.E. ports comply with IEEE802.3af, capable of supplying up to 25W per port ● Housing compliant with IP-30 ● Compatible with DIN rail and wall mounting

This is an industrial-grade simple management Ethernet switch with the following features: ● 10/100Base-T(X) P.S.E. x 4, 100Base-FX single/multi-mode x 2 ports ● Redundant ring O-Ring achieves recovery time of less than 10ms even for connections with over 250 units ● Open-Ring compatible with other manufacturers' ring technologies ● O-Chain supports multiple redundant rings ● Supports STP/RSTP ● Secure network management available with SNMP v1/v2c/v3 ● Compatible with LLDP protocol ● Event occurrence possible via Syslog, email, SNMP, and relay output ● Various settings can be configured via web-based interface or Windows Utility (Open-Vision) ● Equipped with 2 x 100Base-FX optical ports for long-distance communication ● P.S.E. ports comply with IEEE802.3af, capable of supplying up to 25W per port ● Housing compliant with IP-30 ● DIN rail and wall mount compatible