貞徳舎 List of News Articles

"One year warranty for peace of mind, demo units available for loan!" The "Hot Air Generation Device" from Teitokusha is capable of maintaining high-temperature, high-flow hot air. It can be used for a wide range of applications including exhaust gas combustion, functional powders, and rotary kilns. It reaches 1000°C in just 5 minutes after switching on, allowing you to eliminate unnecessary waiting time for high temperatures! As an option, it can generate hot air (atmospheric) at 1200°C, and for applications where you want to avoid an oxidizing atmosphere, it can produce hot air at 900°C under a nitrogen (N2) atmosphere. Despite its large capacity, it has a compact design, so it does not take up unnecessary space. Additionally, it does not require special parts, making installation easy without the need for piping work. From consultation to installation, operation, regular inspections, and free installation services, we offer comprehensive after-sales support both before and after your purchase. 【Features】 ■ Simultaneously achieves high temperature (1000°C) and high flow rate (1Nm3/min) ■ Optional up to 1200°C ■ Compact design despite large capacity ■ Includes control panel and blower ■ One year warranty for peace of mind, demo units available for loan ■ Flow rate can be adjusted while maintaining 1000°C

The "Heat Air Generation Device" from Teitokusha is a device that can maintain high-temperature, high-flow hot air. With an outlet temperature of 1000°C, it comfortably reaches 800°C when the workpiece arrives. If you're looking for a bit more temperature, this is a must-see! Its compact design allows it to reach 1000°C in just 5 minutes, reducing unnecessary space and waiting time during heating. For applications where you want to avoid an oxidizing atmosphere, it can be used at 900°C under a nitrogen (N2) atmosphere. We are also preparing an option for a device that can reach up to 1200°C. From consultation to installation, operation, regular inspections, and free installation services, we offer comprehensive after-sales support both before and after your purchase. In addition to the heat air generation device, we also handle radiant panel heaters. 【Features】 ■ Simultaneously achieves high temperature (1000°C) and high flow rate (1Nm3/min) ■ Compact design despite large capacity ■ Installation can be done in either horizontal or downward orientation ■ Includes control panel and blower ■ One-year warranty for peace of mind, demo units available for loan ■ Flow rate can be adjusted while maintaining 1000°C

The "Hot Air Generating Device" from Teitokusha is a device that can maintain high-temperature, high-flow hot air. With an outlet temperature of 1000°C, it comfortably reaches 800°C when the workpiece arrives. If you're looking for a bit more temperature, this is a must-see! Its compact design allows it to reach 1000°C in just 5 minutes, reducing unnecessary space and waiting time during heating. For applications where you want to avoid an oxidizing atmosphere, it can be used at 900°C under a nitrogen (N2) atmosphere. We are also preparing an option for a device that can reach up to 1200°C. We offer comprehensive after-sales service, including consultation, installation, operation, regular inspections, and free installation services, both before and after your purchase. In addition to the hot air generating device, we also handle radiant panel heaters. 【Features】 ■ Simultaneously achieves high temperature (1000°C) and high flow rate (1Nm3/min) ■ Compact design despite large capacity ■ Installation can be oriented either horizontally or downward ■ Includes control panel and blower ■ Comes with a reassuring 1-year warranty, demo units available for loan ■ Flow rate can be adjusted while maintaining 1000°C

The "Hot Air Generating Device" from Teitokusha is a device that can maintain high-temperature, high-flow hot air. With an outlet temperature of 1000°C, it comfortably reaches 800°C when the workpiece arrives. If you're looking for a bit more temperature, this is a must-see! Its compact design allows it to reach 1000°C in just 5 minutes, reducing unnecessary space and waiting time during heating. For applications where you want to avoid an oxidizing atmosphere, it can be used at 900°C under a nitrogen (N2) atmosphere. We are also preparing an option for a device that can reach up to 1200°C. From consultation to installation, operation, regular inspections, and free installation services, we offer comprehensive after-sales support both before and after your purchase. In addition to the hot air generating device, we also handle radiant panel heaters. 【Features】 ■ Simultaneously achieves high temperature (1000°C) and high flow rate (1Nm3/min) ■ Compact design despite large capacity ■ Installation direction can be either horizontal or downward ■ Includes control panel and blower ■ One-year warranty for peace of mind, demo units available for loan ■ Flow rate can be adjusted while maintaining 1000°C

The ceramic fiber heaters from Teitokusha are produced by combining our unique heating element processing technology, ceramics technology that leverages know-how from 100 years of refractory brick manufacturing, and processing technology for ceramic fiber boards. 【Heating Element】 We primarily use heating elements made by winding round wire coils into a coil shape. Our company applies slit processing to strip-shaped heating elements and adjusts the slit width to design them according to the customer's requirements for current and voltage. 【Ceramics】 The essential function required for ceramics used in heaters is thermal shock resistance. Since the heating element becomes hot immediately upon applying electricity, ceramics that can withstand this rapid temperature change are necessary. We design and manufacture ceramics in-house with formulations tailored to the usage conditions. 【Ceramic Fiber Board Processing Technology】 We perform processing of heaters to the dimensions and shapes requested by our customers. Instead of leaving the ceramic fiber board as is, we also accept various processing treatments such as surface effect treatment, binder removal, and lamination processing. We will solve your problems with products that combine these technologies!

Are you facing any of these issues with heat treatment? - Want to input more electrical capacity in the same installation area... - Want to extend the product lifespan of heaters... - Want to shorten heating rise time and heating duration... - Want to eliminate heating unevenness... - Want to create original heaters... We receive such inquiries from our customers. At Seitokusha, we offer 'Ceramic Fiber Heaters' that can solve your problems. 【Features of Ceramic Fiber】 - Lightweight (previously used bricks as refractory materials) - Insulation material and heating element are combined - Easy installation (just fit into the furnace), allowing for time savings - Having spare parts allows for quick replacement in case of emergencies, eliminating concerns about equipment downtime.

"Can we create a product like this?" "I want to introduce equipment, but I want to confirm the product's performance." We respond to such customer requests. 【Past Testing Examples】 - Ceramic fiber heater glaze firing tests - Heat uniformity tests using quartz glass with ceramic fiber heaters - Comparison tests of new and old ceramic fiber heaters - Hot air generator heating tests - Hot air generator evaluation tests This is just one example. We have many achievements in joint development with customers. One of our features is "technical expertise." Since our founding, we have continuously developed products that control "heat." We also conduct tests and verifications by specialized technical staff in-house. Through heater testing, we exchange opinions with customers and propose heat treatment processes tailored to their needs.

We will assist you in selecting and developing heaters to help address the currently pressing issues of work style reform-related law enforcement, staff shortages, and a lack of successors (such as insufficient time for personnel training). ★Here are some examples. ■ We want heaters with a fast heating time. The customer's request was "to raise the temperature quickly." In response, we developed and delivered a high-power heater that heats up in a short time. ■ We want heaters that are less prone to disconnection and easy to maintain. The customer's request was for "something that is less likely to disconnect and is easy to maintain." Therefore, after repeated proposals and discussions, we suggested a suitable option from our lineup. ■ We want heaters with a long lifespan. We received a request to "extend the lifespan of the heater," and we proposed and delivered a heater that not only has a longer lifespan but also doubles the power. ■ We want to introduce equipment but want to confirm the product's performance. We brought a part of the customer's equipment to our company, simulated its operation, and conducted a heat-up test using our heaters.

Products from Teitokusha can undergo a full model change, but there are also many opportunities for minor changes through a slight shift in perspective while cherishing the items you are currently using. I would like to introduce a few examples of what we are actually doing. I would be happy if you could also share this with others in your department and related parties. ■ Improvement of Heating Element Arrangement This is a proposal using ceramic fiber, but due to the thermal characteristics, the lower side inevitably becomes low temperature. Therefore, we proposed an arrangement that collects heat on the bottom side. Additionally, it is possible to adjust the thermal capacity by widening or narrowing the coil winding pitch. ■ Heat Uniformity Testing of Heaters To achieve uniform temperature distribution in heat treatment heaters manufactured for the automotive industry, we are conducting optimization verification tests on the placement of the workpieces, circuit separation, and output adjustments. There are many things that can be realized by making slight improvements while keeping the core intact. I hope that among our customers, there are those who think, "We have been struggling with this too. Let's consult about it."

Examples of Solutions for Customer Concerns ■ I want to increase the electrical capacity with the same installation area. → By using a strip heating element, it can accommodate twice the capacity in the same area compared to round wire coil heating elements. ■ I want to extend the product lifespan of the heater. → The safe design calculated for the power load on the heating element makes it less prone to disconnection. ■ I want to shorten the heating ramp-up time and heating duration. → Strip heating elements have better radiation efficiency than round wire coil heating elements, allowing for faster heating speed, which reduces heating time and lessens the burden on the heater. ■ I want to eliminate heating unevenness. → By filling the insulation material with heating elements, it becomes a full-area heater, allowing for uniform heating. ■ I want to create an original heater. → We can turn your requests into reality with custom-made designs. Additionally, due to our extensive experience, we can provide quick estimates and designs.

【NEW】Simultaneously achieving high temperatures of 1000℃ and large flow rates! *Demo units available for loan Options for up to 1200℃ are also possible! We offer demo unit loans and free installation services. With a compact design, it can be installed in narrow spaces! Additionally, it has a large capacity yet compact design, so it does not waste space. It can be installed both vertically and horizontally. We provide a touch panel control panel that makes program creation easy as an option. From consultation to installation, operation, regular inspections, and free installation services, we offer comprehensive after-sales support both before and after purchase. 【Hot Air Generation Device Features】 ■ Simultaneously achieves high temperature (1000℃) and large flow rate (1Nm3/min) ■ Options available for up to 1200℃ ■ Large capacity yet compact design ■ Includes control panel and blower ■ Reliable 1-year warranty, demo units available for loan ■ Flow rate can be changed while maintaining 1000℃

The "Hot Air Generation Device" from Seitokusha is a device that can maintain high-temperature, high-flow hot air. It reaches 1000°C in just 5 minutes after switching on, and the optional 1200°C is achieved in 13 minutes, allowing for the reduction of unnecessary waiting time until it reaches high temperatures. For those looking for a reducing atmosphere, it can be used at 900°C with nitrogen (N2). Additionally, it has a compact design despite its large capacity, so it does not take up unnecessary space. It can be installed in either vertical or horizontal orientation. The connection method is simple; just connect the end of your piping to our control panel's blower for easy installation. 【Hot Air Generation Device Features】 ■ Simultaneously achieves high temperature (1000°C) and high flow rate (1Nm3/min) * Nitrogen is at 900°C ■ Optional up to 1200°C ■ Compact design despite large capacity ■ Includes control panel and blower ■ One-year warranty for peace of mind, demo units available for loan ■ Flow rate can be changed while maintaining 1000°C

■□■□■□■□■□■□■□■□■□■□■□■□■□■□■□■□■□ The hot air generator achieves a high temperature of 1000°C and a flow rate of 1Nm3 simultaneously! ■□■□■□■□■□■□■□■□■□■□■□■□■□■□■□■□■□ What kind of image do you have of a hot air generator? The common household image is that of a hair dryer. As the name suggests, it is a machine that emits hot air! So, where is a hot air generator used? - Drying processes for workpieces - Heat treatment and thermal processing of workpieces - Heat retention processes for workpieces It can be used in various applications. Do you have any of the following concerns? "I want high wind power even though the temperature is high." "I have a good flow rate, but I wish the temperature were a bit higher." "I want to direct the airflow downward instead of sideways." If so, please try the hot air generator from Teitokusha. Currently, for those using gas and facing the following issues: "I cannot use combustion gases." "The piping is extensive and troublesome." "I want to improve the factory environment." It can also be used as a replacement for electric systems.

We propose suitable bricks by considering the customer's usage conditions through raw material formulation and processing! Refractory bricks are used for insulation and atmosphere creation inside furnaces, and most of them consist of rectangular bricks standardized by JIS. However, bricks that hold heating elements or heated materials require insulation and strength, leading to complex shapes, which necessitates special-shaped refractory bricks. The features of Teitokusha's refractory bricks include: - Design and development of unique bricks for each product - Formulation and processing of raw materials considering the customer's usage conditions (temperature, thermal shock resistance, atmosphere, etc.) to propose suitable bricks - Cost-effective and small-lot production due to shaping with wooden molds instead of press molds If you let us know what applications you will use the bricks for and the temperature range, you can leave it to us. We will propose the most suitable bricks for you. Additionally, leveraging our brick technology, we also manufacture insulators that are resistant to insulation and heat shock in-house.

【NEW】1000℃ in 5 minutes! Hot Air Generation Device The "Hot Air Generation Device" from Seidokusha is a unit that can maintain high-temperature, high-flow hot air. It reaches 1000℃ in 5 minutes after switching on, and the optional 1200℃ can be achieved in 13 minutes, allowing you to eliminate unnecessary waiting time for high temperatures. Additionally, it is designed to be compact despite its large capacity, so it does not take up unnecessary space. It can be installed either vertically or horizontally. We offer comprehensive after-sales service, including consultation, installation, operation, regular inspections, and free installation services, both before and after purchase. 【Features of the Hot Air Generation Device】 ■ Simultaneously achieves high temperature (1000℃) and high flow rate (1Nm3/min) ■ Optional up to 1200℃ ■ Compact design despite large capacity ■ Includes control panel and blower ■ One-year warranty for peace of mind, demo units available for loan ■ Flow rate can be adjusted while maintaining 1000℃

With 127 years of experience as a heater manufacturer, we solve our customers' problems with our specialized knowledge in heat treatment technology. Our company offers electric furnace heaters known as "ceramic fiber heaters," which are widely used in applications ranging from research to general industrial furnaces. Since the ceramic fiber, which serves as insulation material, is combined with the heating element, these heaters are lightweight compared to traditional brick-insert types, making installation in electric furnaces easy. In addition to the standard "round wire coil" heating element, we use our original "strip heating element," which excels in heat uniformity and achieves high output in a compact space, allowing for rapid heating and cooling speeds. [Features] ■ Non-RCF (environmentally friendly specification) / RCF boards can be produced ■ High-precision processing of boards is possible ■ Easy installation and replacement, saving time ■ There are cases where power has doubled and lifespan extended by replacing other companies' heaters ■ Replacement from gas furnaces is also possible! *In addition to ceramic fiber heaters, we have a wide range of products available. Please feel free to contact us.

【NEW】Hot Air Generation Device! Its compact design allows for installation in narrow spaces! The "Hot Air Generation Device" from Teitokusha is capable of maintaining high-temperature, high-flow hot air. It reaches 1000°C in just 5 minutes after switching on, and the optional 1200°C is reached in 13 minutes, allowing you to eliminate unnecessary waiting time for high temperatures. Additionally, despite its large capacity, it features a compact design that does not waste space. It can be installed either vertically or horizontally. From consultation to installation, operation, regular inspections, and free installation services, we offer comprehensive after-sales support both before and after your purchase. 【Features of the Hot Air Generation Device】 ■ Simultaneously achieves high temperature (1000°C) and high flow rate (1Nm3/min) ■ Optional capability up to 1200°C ■ Compact design despite large capacity ■ Includes control panel and blower ■ One-year warranty for peace of mind, demo units available for loan ■ Flow rate can be adjusted while maintaining 1000°C

【NEW】Hot Air Generator: Achieving high temperatures of 1000℃ and large flow rates simultaneously! *Demo units available for loan. Options for 1200℃ are also possible! We offer demo unit loans and free installation services. Its compact design allows for installation in narrow spaces! Despite its large capacity, it is designed to be compact, so it does not waste space. It can be installed in both vertical and horizontal orientations. We also provide a touch panel control system that makes program creation easy as an option. From consultation to installation, operation, regular inspections, and free installation services, we offer comprehensive after-sales support both before and after purchase. 【Hot Air Generator Features】 ■ Simultaneously achieves high temperature (1000℃) and large flow rate (1Nm3/min) ■ Options available for up to 1200℃ ■ Compact design despite large capacity ■ Includes control panel and blower ■ Reliable 1-year warranty, demo units available for loan ■ Flow rate can be changed while maintaining 1000℃

"We want to increase capacity with the same area." "We want to speed up the heating rate." This is recommended for such customers. Ceramic fiber heaters have the following specific applications: - Various metal heat treatment furnaces (quenching, annealing, homogenizing, carburizing) - Continuous furnace processing for pipes (stainless steel, copper, aluminum, etc.) - Aluminum melting and holding furnaces - Brazing furnaces - Ceramic firing furnaces - Diffusion furnaces for semiconductors - CVD furnaces - Continuous processing furnaces for low-voltage and electronic applications - Ceramic firing furnaces - Glass heat treatment furnaces Sada Tokusha also manufactures heaters using strip-type heating elements. The advantages of strip-type heating elements include: - By covering the entire area of the insulation material with heating elements, uniform heat treatment can be achieved. - Compared to heaters using round wire coil heating elements, more than twice the wattage can be applied. "We want to increase capacity with the same area." "We want to eliminate temperature unevenness (improve uniformity)." "We want to speed up the heating rate." This is recommended for such customers.

■□■□■□■□■□■□■□■□■□■□■□■□■□■□■□■□■□ Doubling the lifespan of heaters...! We will solve the problems you have with your current products! ■□■□■□■□■□■□■□■□■□■□■□■□■□■□■□■□■□ Do you have any concerns about your current products? "I want to improve the heater I'm using now." "I want to expand our technology into other fields." "I wonder if there's something we can work on as a research and development theme." We will respond to such customer requests. Shall we develop new products by combining our technologies? We will assist you in your product development. 【Case Study】 We reviewed each component used with customers who were troubled by short heater lifespans, and through repeated prototyping together, we were able to improve the heater's lifespan by more than double. After the improvement, we received feedback from customers that they used to stop equipment on holidays for repairs and replacements, but now, holiday work has significantly decreased, and they have more free time.

■□■□■□■□■□■□■□■□■□■□■□■□■□ We offer a variety of products such as quartz lamp heaters, seed heaters, and quartz processed products, as well as special ceramic processed products! ■□■□■□■□■□■□■□■□■□■□■□■□■□ Teitokusha manufactures custom-made heaters for electric furnaces that operate in harsh environments with extreme temperature fluctuations. "Although it's not a ceramic fiber heater..." "It's a bit different from a metal frame heater..." "I wonder if you have heaters like this..." "I'd like a heater like this; is it possible?" If you have any concerns, please feel free to consult with us. We will respond to your requests. Design and development projects are our specialty. Since our establishment, we have built a network and will propose products that meet your needs in the best possible way in collaboration with partner manufacturers. 【Examples of Proposals】 - Quartz lamp heaters - Seed heaters - Quartz processed products - Special ceramic processed products, etc. First, our sales representative will visit you to discuss and consider solutions to your challenges together.

【Test Cases】 1. Glass Fiber Organic Residue Test In the production of glass fibers, it is essential to burn off the organic materials in a drying oven. However, there was interest in whether it could be effectively burned off using our hot air generation equipment. After several discussions, an opportunity arose for a company visit, during which we operated the equipment as part of a factory tour and conducted a simple pattern test. If you contact us in advance, it is possible to check the availability of the equipment and conduct a simple test. 2. Surface Temperature Comparison Test Under High-Temperature Atmosphere In the equipment used by the customer, there is a risk of electric leakage when the surface temperature of the heater becomes high. Therefore, the specifications were changed to enhance the heat dissipation effect, and both old and new heaters were tested under the same conditions to measure and compare their surface temperatures. The results showed that by enhancing the heat dissipation effect, there was a tendency for the surface temperature of the heater to decrease. This time, due to temperature differences depending on the measurement method, it is necessary to consider a new challenge regarding the measurement method for actual furnace measurements, and we are currently working on it.

【Test Cases】 1. Glass Fiber Organic Residue Test In the production of glass fibers, it is essential to burn off the organic materials in a drying oven. However, there was interest in whether it could be effectively burned off using our hot air generation equipment. After several discussions, an opportunity arose for a company visit, during which we operated the equipment as part of a factory tour and conducted a simple pattern test. If you contact us in advance, it is possible to check the availability of the equipment and conduct a simple test. 2. Surface Temperature Comparison Test Under High-Temperature Conditions In the equipment used by the customer, there is a risk of electric leakage when the surface temperature of the heater becomes high. Therefore, the specifications were changed to enhance the heat dissipation effect, and tests were conducted on both old and new heaters under the same conditions to measure and compare the surface temperatures. The results showed that by enhancing the heat dissipation effect, there was a tendency for the surface temperature of the heater to decrease. This time, due to temperature differences depending on the measurement method, it is necessary to consider a new challenge regarding the measurement method in relation to actual furnace measurements, and we are currently working on it.

As a manufacturer of industrial electric heaters, we would like to introduce some improvement proposals that we can assist with. 【Issues】 "I want to prevent heat loss from the second and third layers of insulation." "I want to achieve energy-saving operation by preventing heat loss." "I want to make the furnace shell space more compact." 【Solutions】 Change the insulation material used as a backup for the heater. Use high-performance insulation material for the second layer. 【Results】 By adopting high-performance insulation material, a reduction in the amount of heat dissipated from the furnace is expected. *With the same thickness setting as calcium silicate board t5mm, the radiative heat amount is reduced by approximately 50%. ~According to board manufacturer catalog values~

As a manufacturer of industrial electric heaters, we would like to introduce some improvement proposals that we can assist with. 【Challenges】 "I want to increase capacity in the same area." "I want to eliminate temperature unevenness (improve heat uniformity)." "I want to increase the heating speed." 【Solution】 Change the heater using round wire coil heating elements to a heater using strip heating elements. 【Results】 ■ By covering the entire area of the insulation material with heating elements, uniform heat treatment can be achieved. ■ Compared to heaters using round wire coil heating elements, it is possible to input more than twice the wattage. We have received feedback from customers stating, "The radiation efficiency has improved," and "Installation was easy, just changing the fitting."

As a manufacturer of industrial electric heaters, we would like to introduce some improvement proposals that we can assist with. 【Challenges】 "I want to increase capacity with the same area." "I want to eliminate temperature unevenness (improve heat uniformity)." "I want to increase the heating speed." 【Solution】 Change the heater using round wire coil heating elements to a heater using strip heating elements. 【Results】 ■ By covering the entire area of the insulation material with heating elements, uniform heat treatment can be achieved. ■ Compared to heaters using round wire coil heating elements, it is possible to input more than twice the wattage. We have received feedback from customers stating, "The radiation efficiency has improved," and "Installation was easy, just by changing the fitting."

Engineers are often busy and many do not have time for testing or consideration, making it difficult to know which products to choose. I hear many concerns such as slow estimates and lack of responses. There is a demand for companies that can solve these worries as reliable heater manufacturers that can be entrusted with development and production. What about the heater manufacturer Seidokusha? 1. Quick response! We will contact customers with concerns within 24 hours. We will also respond promptly to subsequent estimates and consultations. 2. Leave everything about heaters to us! With over 120 years of experience in designing and manufacturing refractory and insulating materials, you can trust us completely. We also hold 51 patents. We have received the "Technology Excellence Award" and "Intellectual Property Award" at the Osaka Manufacturing Excellence Awards! 3. Leave heater development to us With abundant testing equipment and experience, we can easily conduct various types of tests, shortening your development time. For tests that can be conducted with our equipment, we offer the first test free of charge, so please feel free to make your request.

Engineers are often busy and many do not have time for testing or consideration, leaving them unsure about which products to choose. I hear many concerns such as slow estimates and lack of responses. There is a demand for a heater manufacturer that can be entrusted with development and manufacturing, alleviating such worries. What about the heater manufacturer Seidokusha? 1. Quick response! We will contact customers with concerns within 24 hours. We will also respond promptly to subsequent estimates and consultations. 2. Leave everything about heaters to us! With over 120 years of experience in designing and manufacturing refractory and insulating materials, you can trust us completely. We hold 51 patents. We have received the "Technology Excellence Award" and "Intellectual Property Award" at the Osaka Manufacturing Excellence Awards! 3. Leave heater development to us We have abundant testing equipment and experience, allowing us to easily conduct various types of tests, shortening your development time. For tests that can be conducted with our equipment, we offer the first test free of charge, so please feel free to request it with confidence.

Engineers are often busy and many do not have time for testing or consideration, leaving them unsure of which products to choose. I hear many concerns such as slow estimates and lack of responses. As a heater manufacturer that can be entrusted with development and production with peace of mind, a company that can solve such worries is in demand. What about the heater manufacturer Seidokusha? 1. Quick response! We will contact customers with concerns within 24 hours. We will also respond promptly to subsequent estimates and consultations. 2. Leave everything about heaters to us! With over 120 years of experience in designing and manufacturing refractory and insulating materials, you can trust us completely. We also hold 51 patents. We have received the "Technology Excellence Award" and "Intellectual Property Award" at the Osaka Manufacturing Excellence Awards! 3. Leave heater development to us With abundant testing facilities and experience, we can easily conduct various patterns of tests, shortening your development time. For tests that can be conducted with our equipment, we offer the first test free of charge, so please feel free to make your request with confidence.

■□■□■□■□■□■□■□■□■□■□■□■□■□■□■□■□■□ Developing a new heat treatment method…! We will solve the problems with the products you are currently using! ■□■□■□■□■□■□■□■□■□■□■□■□■□■□■□■□■□ Do you have any concerns about the products you are currently using? "I want to improve the heater I'm using now." "I want to expand my company's technology into other fields." "I wonder if there's something I can work on as a research and development theme." We will respond to such customer requests. Shall we develop new products by combining our technologies? We will assist you in your product development. 【Case Study】 Our company has only manufactured radiant electric resistance heating heaters until now, but we received an inquiry (development proposal) for a high-temperature hot air generator from a certain company. After several years of testing and verification with the customer, we were able to commercialize it in a temperature range not handled by other manufacturers, and we have reached the present day.

A product that leverages each other's strengths has been completed...! We will solve the problems with the products you are currently using! Do you have any concerns about the products you are currently using? "I want to improve the heater I'm using now." "I want to expand my company's technology into other fields." "I wonder if there's something I can work on as a research and development theme." We will respond to such customer requests. Why not develop new products by combining our technologies? We will assist you in your product development. 【Case Study】 We were introduced to a material manufacturer that is engaged in interesting initiatives by a major client, and joint development began. As a result, a new collaborative product was born, using the material manufacturer's outer casing and our heating element.

No unnecessary energy is used, so it is energy-saving! This is an introduction to heaters that utilize "far infrared rays," which have longer wavelengths among "infrared" rays. Electromagnetic waves in the far infrared range (3μm to 25μm) are generally said to be easily absorbed by materials, allowing for efficient heating of objects. Therefore, our company has developed a paint (far infrared paint) that emits a large amount of electromagnetic waves in the far infrared range by applying our ceramic raw material blending technology. Transparent materials like glass tend to transmit electromagnetic waves easily, so the heat from the heating element does not sufficiently transfer to the object being heated. As a result, if a lot of heater power is applied, electricity costs increase. By applying wavelength conversion paint and converting it to wavelengths that glass can easily absorb, heat can be efficiently transferred to the object being heated without passing through. Effects of applying far infrared paint: - The load on the heater decreases, allowing for longer use. - No unnecessary energy is used, resulting in energy-saving effects. - The heating speed increases, improving efficiency.

The "Ceramic Fiber Heater" from Teitokusha is a heater that can handle temperatures up to 1200°C inside the furnace. It features a space-saving design with high output and excellent heat uniformity, including a lineup of "strip-type heating element heaters," "round wire coil heating element heaters," and "special-shaped heating element heaters." These heaters can be used for various applications, including metal heat treatment furnaces for quenching, annealing, homogenizing, and carburizing, as well as continuous processing furnaces related to weak electricity and electronics. 【Examples of Applications】 ■ Various metal heat treatment furnaces (quenching, annealing, homogenizing, carburizing) ■ Various wire materials ■ Pipe continuous processing furnaces (stainless steel, copper, aluminum, etc.) ■ Aluminum melting and holding furnaces ■ Continuous processing furnaces related to weak electricity and electronics ■ Brazing furnaces ■ Ceramic firing furnaces ■ Semiconductor diffusion furnaces ■ CVD furnaces ■ Ceramic firing furnaces ■ Glass heat treatment furnaces ■ Various experimental furnaces *In addition to ceramic fiber heaters, we have a wide range of products available. Please feel free to contact us.

The "Ceramic Fiber Heater" from Teitokusha is a heater capable of operating at temperatures up to 1200°C inside the furnace. We offer a lineup that includes space-saving, high-output, and excellent heat uniformity strip-type heating elements, as well as round wire coil heating elements and irregular heating elements. We respond to requests such as "I want to extend the lifespan of the heater," "I want to introduce a heater that is less prone to breakage," and "I want to make a large furnace body as compact as possible." 【Case Studies】 <Case: I want to extend the lifespan of the heater> ■ We proposed and introduced a heater using a strip-type heating element (TELF-PISR type) - It can handle a large power load per unit area, allowing for high output in a compact space - It excels in heat uniformity, enabling even heating of the object being heated ◎ After introduction: Lifespan doubled, power also doubled! *For more details, please refer to the PDF materials or feel free to contact us. *In addition to ceramic fiber heaters, we have a wide range of products available. Please feel free to inquire.

Do you know about the Platinum Reflector? As the name suggests, it is a "platinum reflector." The Platinum Reflector is made by applying a platinum film onto a heat-resistant alloy, and it can be used in an atmosphere of 800°C. While conventional heat-resistant alloy reflectors were limited to a maximum usage of 500°C, by coating the surface with a thin film of platinum, we have achieved high heat resistance of 800°C. **Features of the Platinum Reflector:** 1. **Heat resistance of 800°C for regular use** By using special materials to prevent the reaction of components in the intermediate layer between platinum and heat-resistant metals, heat resistance of 800°C for regular use is achievable. 2. **Cost-effective** By using platinum foil, it becomes cheaper than vapor deposition or plating processes, achieving low costs. 3. **Delicate temperature distribution** It is possible to create a directional effect, making it very effective in producing the desired temperature distribution. 4. **Impact-resistant structure** With the reflective film on the heat-resistant metal, it has a structure that is more resistant to impact compared to conventional reflectors on quartz glass.

The "Ceramic Fiber Heater" from Teitokusha is a heater capable of operating at temperatures up to 1200°C inside the furnace. The "Strip Heating Element Heater" can handle a large power load per unit surface area, allowing for high output in a compact space. It excels in heat uniformity, enabling even heating of the objects being heated. Additionally, there is a lineup of standard products such as the "Round Wire Coil Heating Element Heater" and high-performance, large-capacity types like the "Special-Shaped Heating Element Heater." Since we design and produce in-house, we can respond flexibly. We meet all needs, from large industrial furnaces to small test furnaces. 【Product Features】 ■ Capable of operating at 1200°C inside the furnace ■ High output in a compact space ■ Excellent heat uniformity ■ In-house design and production ■ Abundant options *In addition to the Ceramic Fiber Heater, we have a wide range of products available. Please feel free to contact us.

We offer various processing services. ■ Surface Hardening Treatment By applying our unique inorganic coating agent to the surface, we harden the surface and enhance dust reduction. ■ Binder Removal Treatment By eliminating the organic binder, we can suppress the binder odor during trial operation and reduce thermal shrinkage. ■ Bonding Treatment By adhering boards together, we can create thick boards. The insertion of ceramic pins increases the bonding strength. 【Applications of Processed Boards】 - Furnace openings and doors - Backup materials for the second and third layers - Furnace walls We can also accommodate environmentally friendly specifications (Non-RCF), so we can accept orders for alumina fiber boards and bio-soluble fiber boards. Hard boards such as #1800 can also be processed similarly to #1400 boards. Regarding shapes, we can create not only rectangular shapes but also cylindrical split shapes, and we perform hole processing, notch processing, and step processing as well.

We offer processed products made from ceramic fiber boards. "Do you have insulation materials without heaters?" "I would like to have it cut into a special shape; is that possible?" We sometimes receive such inquiries. Leave it to us! Based on data from 3D/2D CAD, we perform processing with an NC router, enabling high-precision machining. Furthermore, by combining cutting machines, we can process insulation boards into various shapes. After discussions, we will provide them according to the dimensions and shapes requested by the customer.

A metal heating element refers to a type of resistance heating element among general heating sources. Electric heating elements for industrial furnaces that include this metal heating element are used in various industries such as metal heat treatment, electronic components, ceramics, and the chemical industry. Our company manufactures electric furnace heaters suitable for temperatures up to 1200°C using iron-chromium-aluminum alloy (FeCrAl), which is a type of metal heating element. The shapes of metal heating elements vary. Here, we introduce some of the products we handle. 1. Round wire coil heating element This is a heating element made by spirally winding round wire. The wire diameter and outer coil diameter are set according to the heater's capacity and temperature. 2. Strip heating element A zigzag circuit is formed by alternately slitting a plate-like material. By adjusting the slit width, we change the resistance value of the heating element, allowing for precise design of heater output. Additionally, we perform concave processing calculated to suppress deformation due to thermal expansion of the heating element. This technology has been developed uniquely by our company.

You can design freely at your preferred angle, and repairs or upgrades through part exchanges are also possible! Recommended for customers who want: "I want to use it in a clean environment." "I want temperature control." "I want uniform heat distribution over a wide area." The metal frame heater has the following features: - By using metal for the frame, it has a lower heat capacity than ceramic fiber heaters, allowing for a reduction in heat treatment time. (The heating rate has been shortened by 50-60% compared to ceramic fiber heaters.) - The heating element is suspended, allowing the heat from the back to be used as radiant heat. - By combining it with our specialty strip-type heating elements, effective utilization of the heating surface is achieved. Additionally, you can design freely at your preferred angle, and repairs or upgrades through part exchanges are also possible. We also offer many options. Please feel free to consult with us.

What is a hot air generator? Where is it used? I believe some of you may have such questions. Our hot air generator is electric and takes in air, producing a flow of air at 1000°C with a volume of 1Nm3 from the outlet. As for where hot air generators are used, they are utilized in various applications such as: - Drying processes for workpieces - Heat treatment and thermal processing of workpieces - Heat retention processes for workpieces The development of the N2 1100°C and Air 1200°C models was prompted by requests from our customers. Previously, the maximum temperatures were N2 900°C and Air 1000°C. Within that range, achieving both high temperatures of 1000°C and a large flow rate of 1Nm3 simultaneously was quite rare. However, we received inquiries asking, "Is it possible to achieve 1000°C with N2?" As a result of development efforts by our internal design and technical departments, we were able to achieve N2 1100°C and Air 1200°C by adding optional components to the conventional hot air generator, exceeding our customers' requested temperatures.

We also assist in the production of test furnaces and small furnaces (including control panels)! We can provide proposals unique to heater manufacturers. "I want it not only with the heater but also integrated into a case." "I want a control panel included." "I want to install and use it immediately after delivery." We respond to such customer requests. We assist in the production of test furnaces and small furnaces (including control panels). 【Scope of Work】 - Selection and design of insulation materials - Assembly of heaters and insulation materials - Terminal aggregation (terminal wiring and connections up to relay terminals) "I want the back wall temperature of the furnace to be below ○○℃." "I want to keep the furnace shell size as small as possible." "I want to use products that comply with RCF regulations." "I want to ensure electrical capacity but keep costs down." We also provide proposals unique to heater manufacturers for requests regarding heaters, insulation materials, backup materials, and more. Leveraging our strength in "technical expertise," we carefully respond to each of your requests from design to production.

The "Hot Air Generation Device" from Seidokusha is a device that can maintain high-temperature, high-flow hot air. It reaches 1000℃ in just 5 minutes after switching on, and the optional 1200℃ is achieved in 13 minutes, allowing for the reduction of unnecessary waiting time until it reaches high temperatures. Additionally, despite its large capacity, it features a compact design, so it does not take up unnecessary space. It can be installed either vertically or horizontally. From consultation to installation, operation, regular inspections, and free installation services, we offer comprehensive after-sales support both before and after purchase. 【Features of the Hot Air Generation Device】 ■ Simultaneously achieves high temperature (1000℃) and high flow rate (1Nm3/min) ■ Optional capability up to 1200℃ ■ Compact design despite large capacity ■ Includes control panel and blower ■ One-year warranty for peace of mind, demo units available for loan ■ Flow rate can be adjusted while maintaining 1000℃

【NEW】Turn on the switch and reach 1000℃ in 5 minutes! Hot Air Generation Device The "Hot Air Generation Device" from Seidokusha is a device that can maintain high-temperature, high-flow hot air. It reaches 1000℃ in 5 minutes after turning on the switch, and the optional 1200℃ can be reached in 13 minutes, allowing you to eliminate unnecessary waiting time until it reaches high temperatures. Additionally, it has a compact design despite its large capacity, so it does not take up unnecessary space. It can be installed both vertically and horizontally. From consultation to installation, operation, regular inspections, and free installation services, we offer comprehensive after-sales support both before and after your purchase. 【Hot Air Generation Device Features】 ■ Achieves high temperature (1000℃) and high flow rate (1Nm3/min) simultaneously ■ Optional up to 1200℃ ■ Compact design despite large capacity ■ Includes control panel and blower ■ Reliable 1-year warranty, demo units available for loan ■ Flow rate can be adjusted while maintaining 1000℃

"Exhaust gas combustion, functional powders, rotary kilns, and more can be used in a wide range of applications!" The 'Hot Air Generator' from Seitokusha is a device that can maintain high-temperature, high-flow hot air. It can be used for exhaust gas combustion, functional powders, rotary kilns, and more. It reaches 1000°C in just 5 minutes after switching on, allowing you to eliminate unnecessary waiting time for it to heat up! As an option, it can generate hot air (atmosphere) at 1200°C, and for applications where you want to avoid an oxidizing atmosphere, it can produce hot air at 900°C under a nitrogen (N2) atmosphere. Despite its large capacity, it has a compact design, so it doesn't take up unnecessary space. Additionally, it doesn't require special parts, making installation easy without the need for piping work. From consultation to installation, operation, regular inspections, and free installation services, we offer comprehensive after-sales support before and after your purchase. 【Features】 ■ Simultaneously achieves high temperature (1000°C) and high flow rate (1Nm3/min) ■ Optional up to 1200°C ■ Compact design despite large capacity ■ Includes control panel and blower ■ Reliable 1-year warranty, demo units available for loan ■ Flow rate can be adjusted while maintaining 1000°C