アイオー・エム List of Products and Services

～ A Must-See for Coating Companies and Resin Compound Processing Manufacturers! ～ At our company, IOM, we handle the organic material removal cleaning device 'Arena Comet,' and we offer a 'cleaning service for paint and resin adhered to metal parts' utilizing this cleaning device. The mechanism involves placing the dirty workpieces inside the device (furnace), heating them, and carbonizing the adhered materials to clean the target objects. In general blast cleaning, there can be compatibility issues with complex shapes, and problems such as fixture wear and scratches can easily occur. However, with our process, there is no need to worry about such issues since the workpieces are not touched during treatment! 【Cleaning Targets】 ◎ Target Items: Dies, breaker plates, nozzles, screws, painting jigs, jig hangers, hooks, etc. ◎ Materials: Plastic, hot melt, paint 【Service Features】 ■ Unlike blast cleaning, there are no scratches or fixture wear ■ Processing is possible at a low cost due to our in-house equipment ■ Capable of handling complex-shaped workpieces ■ No solvents used, contributing to reduced environmental impact (SDGs) *Please consult us first! Feel free to [Contact Us]. The device catalog is available in PDF format.

• Electric furnace

The "WP4/WP7 series" is a pressurized water temperature control device that can handle a maximum temperature of 200°C. It meets high safety requirements and offers nearly unlimited options. It is designed with a focus on quality, durability, and energy efficiency. It uses a highly efficient and very energy-saving multi-stage centrifugal pump, and by using high-quality insulation materials for internal components, it saves energy and contributes to a longer lifespan of the system. 【Features】 - Low heat loss and optional pump by insulating all components (150°C) - High energy efficiency achieved through speed control - High reliability and availability of the device due to clever and robust design using highly corrosion-resistant materials - Control box and water area compliant with protection rating IP54 - Heater control via solid-state relay *For more details, please refer to the PDF document or feel free to contact us.

• Temperature and Humidity Control

The "WP5 Series" is a pressurized water high-temperature temperature control device that can be used at a wide range of temperatures: 90°C, 150°C, 180°C, and 200°C. It offers nearly unlimited diverse options and can be used for injection molding, extrusion molding, or many other applications. With high reliability and a variety of functions, it contributes to improved productivity and operational uptime. 【Features】 ■ Easy to use ■ Easy to inspect ■ Energy-saving ■ Long lifespan ■ Process safety / Improvement of operational uptime *For more details, please refer to the PDF materials or feel free to contact us.

• Temperature and Humidity Control

The "WK3/WK4 series" is a pressurized water temperature control unit suitable for injection molding and extrusion molding. The lineup includes the "WK3 series," which supports a maximum temperature of 90°C to 180°C, and the "WK4 series," which supports a maximum temperature of 90°C to 160°C. Designed with a focus on quality, durability, and energy efficiency, it uses only the highest quality components and materials to achieve excellent corrosion resistance. 【Features】 ■ Control of cooling water and water supply via solenoid valves (automatic water supply) ■ Equipped with a booster pump for water supply ■ Can be changed to a type that separates the cooling water and water supply ports ■ Bypass circuit for the supply side and return side ■ Control panel cabinet with IP54 specification (equipped with cooling fan) *For more details, please refer to the PDF document or feel free to contact us.

• Temperature and Humidity Control

By using a moisture meter installed at the hopper discharge of the dryer, it is possible to check the moisture content of the material immediately after drying, which leads to improved product quality. 【Features】 - Inline moisture management - Real-time moisture management

• Temperature and humidity measuring instruments

【Features】 - Double-tube dryer - Over-drying prevention system - Dew point -70℃ - OTXPYREX (glass tube hopper) - Touch screen - USB port - Maximum drying temperature 180℃

• Drying Equipment

The Moretto OTX hopper analyzes the flow of materials inside the hopper using a supercomputer, resulting in a hopper shape that discharges materials in the order they were loaded. This prevents defects caused by materials being discharged in an over-dried or under-dried state, and also allows for a reduction in the size of the hopper. (Patented technology) 【Features】 - Impact-resistant spiral-shaped hopper - Openable and closable discharge outlet - Large window

• Drying Equipment

The mold condensation prevention device MSP·DMS prevents mold condensation by filling the sealed space around the mold with dry air at a dew point of 4°C, enabling stable production throughout the year without being affected by seasonal changes or weather. It uses slides and movable panels, ensuring that workability is not compromised and mold changes are not hindered.

• Resin mold

The compressed air cooling device CAC from Austria's Blue Air Systems for blow molding machines can cool the blow air to -35°C, significantly reducing cycle time.

• Blow Molding Machine

The "Babyplast UAII/10P" consists of a control unit that incorporates a super compact injection unit and hydraulic equipment. Connection to the injection molding machine can be made quickly and easily using a simple interface with available input/output signals. It is capable of molding all thermoplastic resins up to a maximum temperature of 420°C. 【Features】 ■ Easy-to-use display ■ Quick and easy connection with a simple interface ■ Capable of molding all thermoplastic resins up to a maximum temperature of 420°C ■ The unit is completely independent ■ Can be directly installed in an automatic assembly line *For more details, please refer to the PDF document or feel free to contact us.

• Injection Molding Machine
• dispenser

"Babyplast" is a super compact injection molding machine with a clamping force of 6 tons, designed to fit on a tabletop. It guarantees the highest precision through an appropriately sized injection plunger and a pre-plasticizing device. You can select the appropriate injection capacity from five different sizes of injection plungers, and it is also possible to offset the injection position 25mm downward from the center of the platen. 【Features】 ■ Large color touch screen display ■ Clear page display and user-friendly interface ■ Capable of saving molding conditions for 100 molds ■ Backup possible to USB memory ■ Displays history for 20 cycles ★ If you bring your materials, you can try a live demo at our company. Feel free to contact us! * For product details, please download the PDF or feel free to inquire.

• Injection Molding Machine

Pladsan's fully electric injection unit has the capability to inject from a minimum of 1cc to 1,000cc. It can be installed on existing molding machines without being tied to a specific manufacturer, allowing for multi-material molding without the need to purchase a two-color molding machine. Additionally, we also sell vertical/horizontal rotating rotary tables, and package sales are available as well. 【Features】 - Can be installed on existing equipment - High precision - Excellent reproducibility - Quick installation of the unit - Cost performance - Energy saving - Increased productivity - Easy maintenance

• Injection Molding Machine

The MC-Hybrid is a unique supply system concept that combines batch mixing and inline feeding into one system. The main material or crushed material is mixed in a super compact design weight batch mixer. Since only the main material is mixed in the main hopper, the mixing speed is fast, allowing the batch mixer to be compact. Additives are supplied directly in-line with weight measurement to the material inlets of injection molding machines or extrusion machines. There is no material transport with loaders, which eliminates separation during transport and makes cleaning easy.

• plastic
• Plastic utensils and containers
• Powder Supply Device

MC-Smart is software that can manage an unlimited number of weight measurement-based mobile color systems from a single unit. It is a system based on a 24-hour data collection database, allowing you to view and restore past data even months later. By downloading the software to your computer and connecting it to the controller via a LAN cable, you can manage it in real-time. It is also possible to save data via USB and output log data later. This software ensures the accuracy of supply quantities as data and allows you to check when the machine experienced any abnormalities. 【Features】 ■ Supply quantity monitoring ■ Data logging ■ Quality control ■ Abnormality investigation

• plastic
• Data Logger

The "Hot Melt Dispensing Device" is a machine that automates sealing operations for resin molded products, such as applying foam urethane tape. By attaching it to a 3-axis or multi-axis robot, it can be integrated into production lines. It can accommodate a wide range of coating patterns and can be used for various shaped molded products without the need to process or modify molds. Since hot melt begins to harden immediately after dispensing, there is no need for ultraviolet light generation devices. You can choose between a foam type with excellent cushioning properties and a non-foam type. 【Features】 ■ Reduces costs for urethane tape bonding operations ■ Can be applied to various products by changing the teaching ■ Good adhesion and water resistance to resins ■ Excellent heat resistance with a softening point of 145℃ ■ Supports seven types of coating patterns *For more details, please refer to the materials available for download in PDF format. Feel free to contact us with any inquiries.

• dispenser
• Other painting machines

The fluidized bed sand bath that we handle is equipment made in Belgium. Our company has an exclusive sales contract with Arena in Belgium, and all maintenance and related services are carried out by us. The features of the fluidized bed sand bath are as follows: ● The processing time for cleaning is short. ● The running costs are low because silica sand is heated. ● Since the silica sand retains heat well after the power is turned off, continuous cleaning can be performed. ● Dirty air is treated with an afterburner, and clean air is discharged. ● The size of the processing furnace can be selected from five types. ● It is compatible with both city gas and propane. *For more details, please refer to the PDF materials or feel free to contact us.*

• Other cleaning machines
• Heating device

MC-Weight is a material control system for extrusion molding machines. This system achieves stable material supply by measuring weight with a weighing module and controlling supply with a knife valve, addressing the previously uncertain material supply quantity. 【Features】 ■ High-precision material supply ■ Accurate measurement of material weight ■ Real-time measurement of material consumption (optional)

• plastic

This is a device for supplying a constant amount of powder material that can be installed directly above the cylinder, usable in various molding processes such as injection molding and extrusion molding. The weight inside the hopper is measured by a load cell, and a dual-axis screw enables high-precision supply. It is capable of supplying additives such as pigments, foaming agents, and functional materials. 【Features】 ■ High-precision material supply ■ Elimination of color and mixing inconsistencies ■ Equipped with an agitator (to prevent bridging) ■ Multiple units can be installed ■ Easy color change/cleaning without tools ■ Data collection (optional) Material supply tests and rental tests are also available.

• plastic

This is a device for supplying a constant amount of additives such as masterbatch, which can be installed directly above the cylinder and is usable in all molding sites, including injection molding and extrusion molding. Unlike the additive method of batch weighing with a cup, this device uses a load cell to weigh the material in the hopper and a high-precision cylinder to dispense the material using a subtractive method (patented technology). It is a space-saving supply device that replaces floor-mounted mixers. By attaching a loader, it can continuously cut out materials. In addition to masterbatch, it can supply additives and grinding materials such as foaming agents and functional materials. **Features** - On-machine installation - Weight subtractive method - High-precision material supply - Elimination of color unevenness - Automatic adjustment of supply amount - Compatible with powder material supply - Loader installation possible - Multiple units can be installed - Easy color change/cleaning without tools - Data acquisition (optional) Material supply tests and rental tests are also available.

• plastic

The "Oil Temperature Control Unit for Aluminum Die Casting" is suitable for a wide range of different process controls. The media circulation system is equipped with a cooling water supply inlet, a strainer for the circulating media return, a differential pressure flow sensor, and an IP54-rated control box for electrical and control equipment as standard. With virtually unlimited options and equipment variations, along with maximum reliability and precision, it is capable of meeting diverse demands. 【Standard Equipment (Partial)】 ■ General - High-quality metal housing with powder coating - Robust structure using high-quality materials - Easy-to-move casters - Temperature control for jackets and more - Can be linked with molding machines or your existing equipment through signal exchange - Temperature control for extruders - Temperature control for films *For more details, please refer to the PDF document or feel free to contact us.

• Temperature and Humidity Control

Introducing the "ANES Multi-Drop Slide Mechanism Servo Motor Controller," a needle-driven control technology. It protects the controller from misoperation at three user levels. All parameters can be adjusted according to the application. The controller communicates with injection molding machines and programmable input/output. 【Features】 ■ Data and settings are backed up via a built-in USB interface ■ Data recording can be transferred between multiple controller units ■ User management with different permission levels is possible ■ All operational and positional data can be easily set via a user-friendly touchscreen *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• controller

Introducing the needle-driven control technology controller "DP4 to DP16." The DPE is operated via a 7-inch touchscreen. With an intuitive and easy-to-understand layout and full-color display guide, the current needle position and control signals are always recognizable. The control unit can be configured and set based on the application. Additionally, mold data settings can be saved in the control unit. 【Features】 ■ Capable of controlling up to 16 stepping motors for needle drive control ■ Accurate positioning through encoder signal reading ■ Cascade connection of connected needles is possible ■ Control of valve gate as a closed loop ■ All actions and logs are recorded in internal memory *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• controller

Introducing the hot runner system control technology controller 'DP6 to DP72'. This product is equipped with a variety of functions to reliably and safely control complex hot runner systems. It can accommodate up to 24 control circuits within a single ultra-compact housing. By connecting multiple "DPT24 control units," it can control up to 72 circuits. 【Features】 ■ Self-optimizing control - The controller automatically adapts to the connected load for optimal control ■ Equipped with a 7-inch, multi-touch compatible LCD (800×480 pixels, TFT/18-bit color depth) ■ Can accommodate up to 24 control circuits within a single ultra-compact housing ■ Capable of controlling up to 72 circuits *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• controller

Introducing the control technology controller for the hot runner system, "DP1 to DP6." This product is an economical and user-friendly compact controller. It displays both the set temperature and the actual temperature, allowing for easy control via input keys. 【Features of DP1 and DP2】 ■ Control of one or two circuits ■ Fuzzy PID control ■ Soft start capability ■ Displays both set temperature and measured temperature ■ Pulse control ■ Heating function during production interruption ■ Change of operating mode (setting and control) *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• controller

We would like to introduce the "Cold Runner System" for LSR processing. This system features a simple structure, a modular nozzle design, and excellent thermal separation between the nozzle and cavity, providing an outstanding solution for cold halves during injection molding. 【Advantages】 ■ Provides pre-assembled cold halves ■ Reduces the effects of thermal expansion through a floating suspension mechanism ■ Achieves an optimal temperature profile through cooling medium circulation *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

By providing the 'Hot Half' with the height of the hot runner nozzle already adjusted, we aim to shorten project delivery times and reduce burdens, significantly maximizing the performance of the hot runner system. Additionally, this product is shipped pre-wired and assembled, having undergone functional testing. Since meticulous fine-tuning is unnecessary, it eliminates assembly errors and enhances efficiency. 【Features】 ■ Efficient ■ Economical ■ Capable of shortening project delivery times and reducing burdens ■ Significantly maximizes the performance of the hot runner system *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The product allows for easy installation and precise, intelligent needle control thanks to its excellent connection technology. The precise opening of the valve gate nozzle enables the injection molding process even with a low injection weight. Additionally, all movable parts can be replaced by the customer. 【Features】 ■ Powerful and fast servo motor for valve gate - Up to 24 points of μ range settings available - Needle closes within 0.2 seconds - Suitable for use in clean rooms ■ Wear-resistant special coating on sliding mechanism - The wear-resistant specially coated sliding mechanism is replaceable by the customer *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

Our company offers a variety of valve gate nozzles and needle actuation options. The application-specific mold concepts can be applied perfectly both technically and economically. With valve gate technology, we accommodate gate diameters from 0.8mm to 4.0mm and support a range from minimum to maximum injection weight. The innovative conical needle guide design and optimized needle pin enable non-contact gate opening and closing, as well as high wear resistance. 【Features】 ■ EVN Single Needle Valve - Needle position adjustment mechanism - Design unaffected by thermal expansion ■ Sealing and needle guide within the manifold ■ Heater overheat connection piece ■ Needle guide inside the nozzle *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The product is heated from the outside, ensuring optimal melt flow with the lowest possible pressure loss. The heater connection is designed with a unique sleeve mechanism to protect against damage. Additionally, flexible positioning of the nozzle and the option to select any gate diameter are available. 【Features】 ■ Thermocouple mounted on the surface ■ Connection element ■ Pressure pad ■ Insulation plate for high temperatures ■ Press-fit heater *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

Introducing the "Multi-Drop Hot Runner Nozzle." The "OkaFlow Hot Runner Nozzle" is an ideal solution for horizontal gate configurations that can use up to 8 chips per nozzle. By using the "SGF/SGT Multi-Drop Hot Runner Nozzle," it is possible to achieve an optimal design for hot runner systems while minimizing the cavity spacing. 【Features】 ■ Heater plug connection ■ Thermocouple plug connection ■ Sub-manifold ■ Nozzle chip ■ Chip area heated by the heater ■ Pins ■ Pitch circle diameter: 45mm/65mm *For more details, please refer to the PDF document or feel free to contact us.

• nozzle
• Other machine elements

The "BlueFlow Hot Runner Nozzle" has improved the flexibility of the temperature profile, achieving a slim design and small nozzle outer diameter while enhancing the quality of molded products. Additionally, its narrow and small size increases the design freedom for directly placing gates on molded products, reducing the necessary space within the mold. 【Features】 ■ Slim ■ Suitable temperature profile ■ High speed ■ Small size, great performance *For more details, please refer to the PDF document or feel free to contact us.

• nozzle
• Other machine elements

This product offers nozzles that meet various injection molding requirements, including different nozzle inner diameters, lengths, and gate shapes. It accommodates molded product weights ranging from 0.0189 to 5000g. The innovative double-shaft structure ensures excellent thermal insulation in the shaft tip area, minimizing heat loss between the hot runner nozzle and the cavity. 【Benefits】 ■ The nozzle tip achieves optimal temperature transitions due to its large contact surface with the nozzle. ■ The excellent thermal conductivity of the nozzle tip allows for a lower set temperature of the nozzle. ■ The tip of the nozzle does not contact the mold, resulting in no heat loss. ■ Easy installation and protection against resin leakage. ■ Reduces the time required for assembly and disassembly. *For more details, please refer to the PDF document or feel free to contact us.

• nozzle
• Other machine elements

The "Babyplast 6/10 VP" is a super compact vertical injection molding machine that guarantees high precision through a pre-plasticizing device and a suitably sized plunger. To achieve the appropriate injection weight, it is possible to choose from eight different plunger diameters. Additionally, the incorporated "V table" enables ideal insert molding. 【Features】 ■ Compact mold and small footprint ■ User-friendly design ■ Low power consumption ■ Fully integrable into assembly lines *For more details, please refer to the PDF document or feel free to contact us.

• Injection Molding Machine

The "Babyplast UAII/10P" consists of a control unit that incorporates a super compact injection unit and hydraulic equipment. Connection to the injection molding machine can be done quickly and easily using a simple interface with available input/output signals. It is capable of molding all thermoplastic resins up to a maximum temperature of 420°C. 【Features】 ■ Easy-to-use display ■ Quick and easy connection with a simple interface ■ Capable of molding all thermoplastic resins up to a maximum temperature of 420°C ■ The unit is completely independent ■ Can also be directly installed in automatic assembly lines *For more details, please refer to the PDF document or feel free to contact us.

• Injection Molding Machine
• dispenser

Günther's "Hot Runner System" allows for the molding of all products using virgin material without producing runners or sprues, achieving stabilization of molded products, reduction of raw material waste, and space-saving benefits. Thanks to heat control technology optimized for each type of resin, not only is power consumption significantly reduced, but heat dissipation from the nozzles is also suppressed, leading to a decrease in cooling demand and improved economic efficiency, with energy savings of up to 50% achieved. *For more details, please download and view the brochure.*

• Injection Molding Machine

"Arena Comet" is a low environmental impact organic material removal cleaning device. It features a thermal decomposition oven type and a fluidized bed sand bath type cleaning system, capable of removing plastic, rubber, adhesives, grease, and paint (both cured and uncured paint, powder coating) from hot runner nozzles, screws, painting jigs, jig hangers, hooks, and more. Both the Diablo series with thermal decomposition oven type and the Sirocco series with fluidized bed and sand bath type utilize a combustion degreasing furnace (afterburner) to completely combust harmful organic gases emitted, rendering them harmless. 【Features (Diablo S Series)】 - Achieves reduced installation area with vertical design - Suitable for processing small parts, jigs, molds, etc. - No wear or deformation on parts being cleaned - Reliable combustion degreasing of organic gases by combustion degreasing furnace (rendering exhaust gases harmless) - Operates unmanned with a touch panel interface. ★ If you have jigs that require cleaning, we can provide a trial demo! Please feel free to consult with us. * For product details, please refer to the PDF document.

• Electric furnace
• Other cleaning machines
• Other environmental equipment

The "N-G・H Series" is a temperature control device designed for ultra-high temperature specifications. It has been specially designed to achieve a maximum temperature of 225°C, significantly exceeding the atmospheric boiling point by pressurizing water. Due to its high temperature and accuracy, it meets all mold temperature conditions for high-temperature polymers, such as PEEK, which are crucial for medical optical component applications, as well as resins for injection molding. 【Features】 ■ Compatible with injection molding, extrusion molding, and other fields ■ Covers a wide temperature range up to 225°C ■ Meets all mold temperature conditions for high-temperature polymers and resins for injection molding ■ Energy-saving achieved through high-quality multi-stage centrifugal pumps ■ Supports resins requiring high temperatures, such as engineering plastics and PEEK ■ Custom specifications can be accommodated based on customer requests ★ We have demo units available for loan. Please feel free to contact us! * For more product details, please download and view the catalog.

• Temperature and Humidity Control

The "ATT Heating and Cooling Temperature Control Technology" uses two individually temperature-controlled media (water or oil) to change the temperature of various molds such as injection molds and compression molds, thereby solving appearance defects in molded products. The system alternately fills the mold with high-temperature and low-temperature thermal media (water or oil), allowing for the heating and cooling control of the mold temperature in an alternating manner within a set time. 【Advantages of ATT Injection Molding Method】 ■ Reduces injection pressure and clamping force even in areas away from the gate ■ Minimizes internal stress during the compression molding of thick optical components ■ Improves the surface finish of products ■ Homogenizes glass fibers within technical molded parts ■ Prevents the formation of weld lines ■ Shortens cycle time as molded products cool quickly ★ You can see the temperature control equipment in operation at our company. Feel free to visit! * For more product details, please download and view the catalog.

• Temperature and Humidity Control

"Babyplast" is a super compact injection molding machine with a clamping force of 6 tons, designed to fit on a tabletop. It guarantees the highest precision through an appropriately sized injection plunger and a pre-plasticizing device. You can select the appropriate injection capacity from five different sizes of injection plungers, and it is also possible to offset the injection position 25mm downward from the center of the platen. 【Features】 ■ Large color touch screen display ■ Clear page display and user-friendly interface ■ Capable of saving molding conditions for 100 molds ■ Backup to USB memory ■ Displays history for 20 cycles ★ If you bring your own materials, you can try a live demo at our company. Feel free to reach out! * For product details, please download the PDF or feel free to contact us.

• Injection Molding Machine