メガシステム Product Lineup

This catalog presents a list of products for hydrogen stations. Currently, the development of hydrogen stations using ultra-high-pressure hydrogen is progressing in various locations towards the realization of a new society utilizing hydrogen energy. As the ultra-high-pressure hydrogen handled at hydrogen stations will require even higher pressure usage in the future, greater attention to safety is necessary than ever before. For more details, please download the PDF. [Featured Products] ■ Ultra-high-pressure pressure regulator "HPR Series" ■ High flow ultra-high-pressure pressure regulator "HPRL Series" ■ Ultra-high-pressure pressure relief valve (back pressure valve) "HPB Series" ■ Flow prevention valve "EFV1 Series" ■ High pressure large flow flow prevention valve "EFV2 Series" ■ Portable pressure-tightness testing equipment "model MA-10385" *For more details, please refer to the PDF document or feel free to contact us.

• Pressure Control
• Pipe Fittings

The "REF5 Series" is a multi-layer fluorine tube that meets various needs. By using FEP for the interior, it achieves the same level of interior cleanliness (liquid repellency) as single-layer fluorine tubes. Due to its high moisture barrier properties, it can also be used for fluids that react with moisture (such as paint hardeners). The outer layer of nylon elastomer has high gas barrier properties, reducing air ingress (bubble formation) into the fluid, and is resistant to bending, wear, and scratches, making it suitable for piping in robots and other applications. 【Features】 - Significantly improved interior cleanliness - Good gas barrier properties and mobility - Achieves performance equivalent to fluorine tubes while keeping costs down through unique technology - Usable for various applications without compromising flexibility *For more details, please refer to the PDF materials or feel free to contact us.

• tube

The "EFV2 Series" is a high-pressure, high-flow overcurrent prevention valve designed for hydrogen stations. It is an overcurrent prevention valve with a flow diameter of φ10, suitable for piping with an internal diameter exceeding φ5 and for medium-pressure piping. The main material used is JIS G4303 SUS316 with a nickel equivalent of 28.5 or higher. Additionally, the external seal employs a metal seal method using a copper gasket, providing excellent gas tightness. The gas contact parts are designed with wall thickness secured by strength calculations in compliance with the High-Pressure Gas Safety Act. 【Features】 ■ The valve automatically operates to stop the flow when the flow rate on the outlet side of the overcurrent prevention valve becomes excessive. ■ The structure allows a slight flow of compressed hydrogen from the valve even during operation. ■ The valve resets due to the spring force when the pressure on the inlet and outlet sides becomes uniform. ■ The external seal uses a metal seal method with a copper gasket. *For more details, please refer to the PDF materials or feel free to contact us.

• Pressure Control
• Pipe Fittings

The "EFV1 Series" is an overflow prevention valve for hydrogen stations. When the flow rate on the outlet side of the overflow prevention valve becomes excessive, the valve automatically activates to stop the flow. The main material used is JIS G4303 SUS316 with a nickel equivalent of 28.5 or higher. Even during operation, a small amount of compressed hydrogen flows from the valve section, and when the pressure on the inlet and outlet sides becomes uniform, it is automatically reset by the force of a spring. 【Features】 ■ A structure that allows a small amount of compressed hydrogen to flow from the valve section during operation ■ Automatically resets when the pressure on the inlet and outlet sides becomes uniform due to the force of a spring ■ External sealing uses a metal seal method with copper packing ■ The gas contact parts are designed with thickness secured by strength calculations in compliance with the High-Pressure Gas Safety Act *For more details, please refer to the PDF document or feel free to contact us.

• Pressure Control
• Pipe Fittings

The "HPB Series" is a mechanical pressure relief valve (back pressure valve) developed to withstand a maximum operating pressure of 100 MPa. The main material used is JIS G4303 SUS316 with a nickel equivalent of 28.5 or higher. It is a self-supporting mechanical design that does not require a power source, contributing to miniaturization and space-saving. The gas contact parts are designed with wall thickness secured through strength calculations in compliance with the High-Pressure Gas Safety Act. If an orifice is not installed to release the specified flow rate, it can be used as a back pressure valve for ultra-high pressure. 【Features】 ■ Newly designed valve structure and piston mechanism ■ Achieves stable starting and stopping pressures ■ Can be used as a back pressure valve for ultra-high pressure if no orifice is installed ■ Gas contact parts are designed with wall thickness secured through strength calculations in compliance with the High-Pressure Gas Safety Act *For more details, please refer to the PDF document or feel free to contact us.

• Pressure Control
• Pipe Fittings

The "HPRL Series" is a pressure regulator designed to fill compressed hydrogen into the storage units of off-site hydrogen stations. In addition to filling hydrogen stations, it is also suitable for applications that involve recovering used gas and repressurizing it. The main material used is JIS G4303 SUS316 with a nickel equivalent of 28.5 or higher. Furthermore, compressed hydrogen transported by trailers can be depressurized using this product and then repressurized with a compressor, allowing for efficient filling of compressed hydrogen into storage tanks. 【Features】 ■ Adopts a newly designed piston-type pressure reduction mechanism ■ Provides stable pressure regulation while accommodating ultra-high pressure ■ Simple single-stage pressure reduction method ■ Minimizes changes in outlet pressure due to fluctuations in inlet pressure *For more details, please refer to the PDF document or feel free to contact us.

• Pressure Control
• Pipe Fittings

The "HPR Series" is a pressure regulator developed for hydrogen stations, designed to handle a maximum inlet pressure of 100 MPa. To accommodate ultra-high pressure, it employs a piston-type pressure reduction mechanism. The gas contact parts are designed with thickness calculated based on compliance with the High-Pressure Gas Safety Act. It can be used for introducing ultra-high pressure hydrogen gas into low-pressure lines, analyzing compressed hydrogen gas, and conducting leak tests. 【Features】 - The main materials used are JIS G4303 SUS316 with a nickel equivalent of 28.5 or higher. - A piston-type pressure reduction mechanism is adopted to handle ultra-high pressure. - Suitable piston and cylinder diameters are used for each outlet pressure, enabling stable pressure regulation. - The gas contact parts are designed with thickness calculated based on compliance with the High-Pressure Gas Safety Act. *For more details, please refer to the PDF materials or feel free to contact us.

• Pressure Control
• Pipe Fittings

"PS-fit" is a fitting made of PEEK resin, which has excellent chemical resistance. With a smooth inner diameter surface, there is no need to replace the sleeve even with repeated use. It has achieved weight reduction, approximately 80% less compared to conventional products. The structure minimizes liquid accumulation, improving the ease of attaching and detaching tubes, and has reduced the force required to remove the tubes by about 40%. 【Features】 ■ Improved work efficiency ■ No need to replace the sleeve even with repeated use ■ Smooth inner diameter surface ■ Excellent flow characteristics ■ Structure with minimal liquid accumulation *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings

"LS-fit" is a fitting with excellent flow characteristics. It features the Easy Fit mechanism, which improves work efficiency. It has a smooth inner diameter surface, and there is no need to replace the sleeve even with repeated use. It can be used for fluids such as air, water, oil, paint, ink, and solvents. 【Features】 ■ Improved work efficiency with Easy Fit mechanism ■ No need to replace the sleeve even with repeated use ■ Smooth inner diameter surface ■ Excellent flow characteristics ■ Achieves high flow rates *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings

"BE-fit" is a blade hose connector that allows for easy attachment and detachment without any coiling of the hose. Due to minimal damage to the hose, there is little deformation of the braid after detachment, allowing for repeated use. An additional mechanism has been incorporated to assist with the smooth insertion of the hose into the nut, which is not found in standard products. The nut, sleeve, and chuck are integrated, eliminating the need for part replacement and significantly reducing labor costs. 【Features】 ■ Easy attachment and detachment of the hose ■ Equipped with a chuck mechanism ■ No risk of incorrect part placement ■ No step, minimal liquid pooling ■ Hose can be reused repeatedly *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings

"NAGASEP" is a degassing module that excels in solvent resistance, heat resistance, long-term reliability, compactness, and flexibility. It is hydrophobic and has excellent selective permeability for organic substances. It has a heat resistance of 200°C and can be sterilized using direct steam or autoclave sterilization methods in animal cell culture. 【Features】 ■ Hydrophobic with excellent selective permeability for organic substances ■ Long-term use is possible due to its homogeneous membrane, which eliminates concerns about clogging ■ Ultra-fine hollow fiber type module ■ Enables compact design of equipment *For more details, please refer to the PDF document or feel free to contact us.

• Other water treatment equipment
• Other environmental equipment

The "CR Series" is a compact rope-type vibration isolator that is smaller and more cost-effective than wire ropes, capable of simultaneously reducing both shock and vibration. It can be installed on individual machine components, making it ideal for absorbing vibrations in precision machinery and electronic devices. Additionally, each part is made of metal, offering excellent environmental resistance and is less affected by temperature and other conditions, making it suitable for various usage environments. 【Features】 ■ High damping force ■ Capable of shock absorption and vibration isolation in three axes (x, y, z) ■ Suitable for various usage environments *For more details, please download the PDF or feel free to contact us.

• Anti-vibration, earthquake-proof, vibration-isolating devices