トリーエンジニアリング List of Products and Services

The manufacturing line I am in charge of produces small electronic components for automobiles, and since these are very important parts, it is necessary to minimize defects as close to zero as possible. As a countermeasure for fumes during laser welding, we were using an air nozzle and vacuum unit together, but due to turbulence from the air nozzle, fumes were swirling inside the equipment, leading to product defects and operational failures, which became a significant problem. Reducing air consumption to suppress turbulence was also a major challenge, as it sometimes meant that air could not reach the vacuum adequately. However, the current situation was that we had no good solutions and had to continue using the existing nozzles. Amidst this, as the equipment became smaller, the available nozzles also decreased, and we were struggling to find a solution when we discovered Hayate at an exhibition. It is a highly directional, thin-sheet air nozzle that also has energy-saving performance. When I inquired about a "super compact type," I was honestly surprised to receive a proposal for a type that is ultra-compact yet maintains a thin-sheet design and high directionality. After its introduction, my concerns were alleviated, and I was able to design the equipment without worrying about the constraints of the air nozzle. Quality defects have drastically decreased, and production efficiency has significantly increased, leaving me very satisfied.

• nozzle

Honestly, I thought further improvements were impossible. With the conventional nozzle, the dewatering effect was 70-80%, the device was over 3 meters long, and the air consumption was over 3,000 liters/min per unit. I felt a limit to the extent that I even considered design changes to extend the transport distance and promote natural drying. At that time, I discovered the air nozzle 'Hayate' on Ipros. 'I was half in doubt, but I entrusted my last hope to it and requested an experiment,' said the person in charge. When they confirmed the results in the video and experienced the actual demo, they were so surprised that they exclaimed, 'Really... is it dewatering?' The introduction effect was overwhelming. The dewatering effect reached 99%, the device length was reduced to 1/4, and air consumption was less than 1/5. Furthermore, the improvement in design flexibility and the reduction in transport distance significantly enhanced line efficiency. It also directly contributed to the reduction of CO₂ emissions and electricity costs, and it is now adopted as the standard specification. We have received feedback from end users stating, 'We will use Hayate for all dewatering areas in the future.' If you are looking for overwhelming dewatering performance with energy savings and space efficiency, please consider Hayate.

• nozzle

"Honestly, I underestimated it. But now I can't let it go." In the manufacturing process dealing with thread-like fibers, image inspection is essential to prevent the outflow of NG products to the next process. However, the attachment of lint to the lenses and reflectors was serious, leading to unstable inspection accuracy, and it became routine to stop the equipment every two hours for manual cleaning. We tried various air nozzles, but the honest feedback from the field was, "No matter which nozzle we use, the effect is mediocre," and "It's a waste of air and electricity, but there's no choice." At that time, a business partner introduced us to Hayate, and we conducted verification with the actual machine. The results were so effective that I thought, "What were we doing before?" The attachment to the lenses and reflectors drastically decreased, and the need for cleaning every two hours naturally disappeared. I still vividly remember exclaiming, "Honestly, I underestimated it." ■ Effects achieved by introducing Hayate Zero downtime for inspection equipment → Significant reduction in management tasks Voices from the field saying, "It has become incredibly easier" 60% reduction in power consumption and CO₂ emissions compared to before Stable inspection accuracy → Contributed to quality improvement Stabilization of production → Reduction in overtime hours Increase in daily production volume and overall efficiency improvement in the field.

• nozzle

We have fully introduced the Hayate series into the dust removal process of our substrate manufacturing line. The air nozzles we were previously using had a dust removal rate of about 50%, which had plateaued, leading to ongoing quality issues due to residual and reattached foreign substances. When we first tested the Hayate, the first thing we noticed was the difference in the quality of the airflow itself. Unlike the air nozzles we had been using, the Hayate provides a stable supply of thin, directional air, ensuring that the airflow reaches the target surface consistently. It was clear from the results that it effectively blows away foreign substances. Upon inspecting the foreign substance retention rate, most models achieved a dust removal rate of over 70%. In some models, a dust removal performance of over 99% was confirmed, significantly improving product quality and, as a result, greatly reducing the number of defects caused by foreign substances. Furthermore, air consumption has been reduced by more than 50% compared to previous models, and noise levels have also been noticeably lowered. This has reduced stress for operators and contributed to improving the working environment within the factory. Currently, we have adopted the Hayate as the standard specification for our dust removal process, and we are experiencing benefits in terms of quality, environment, and cost.

• nozzle

A device manufacturer delivered a device incorporating conventional air nozzles to an end user. However, the dewatering performance was not as expected, leading to ongoing adjustments. Despite repeated trials, including adding nozzles, there was no improvement in the rejection of defective products during the inspection process. During this time, the person in charge encountered the air nozzle "Hayate" at a trade show. Later, when they validated it using a demo unit on the actual device, they found that it could effectively remove even the fine water droplets that had previously been difficult to eliminate. Moreover, while four conventional units were insufficient, just two Hayate units provided sufficient effectiveness. This became the decisive factor for adoption. The introduction not only improved dewatering performance but also led to the following benefits: - Contribution to energy savings for the end user - Reduction in complaint handling and management tasks - Maintenance of trust relationships - Reduction of "hidden costs" such as labor and travel expenses There were also positive impacts on stable operation of the production line and reductions in waste and CO₂ emissions. While controlling costs is important, this experience prompted a reconsideration of "what truly constitutes a valuable choice," as reflected in the feedback received.

• nozzle

"The water droplet removal effect was far superior compared to the nozzles we had been using previously." We received such feedback from a manufacturer of retort pouch food products who actually implemented it. - The performance of blowing away water droplets is overwhelmingly high, significantly improving the efficiency of the drying process. - Since the air is concentrated and directed at the target, we were able to reduce the flow rate. - The load on the compressor has been greatly reduced, leading to expected energy-saving effects. - The wind noise is very quiet, contributing to an improved working environment. - Made of SUS, it is resistant to corrosion and has excellent durability. - The foreign objects blown away are less likely to scatter around, which is advantageous from a hygiene management perspective. - The nozzle is of very high quality, and I truly believe it was a good decision to implement it. The air nozzle "Hayate" demonstrates performance that sets it apart from the nozzles previously used in water droplet removal, foreign object removal, and drying processes on food production lines. In particular, its highly directional high-speed laminar airflow simultaneously achieves "efficiency" and "energy savings," which were difficult to realize with conventional methods.

• nozzle

■Introducing Company: A certain food manufacturing company The previously used blower-type dewatering device had unsatisfactory dewatering performance, and the working environment was in a harsh situation with high noise levels of 95 to 100 dB. Workers were regularly troubled by the high noise, leading to issues such as work stress and decreased concentration. ■Effects revealed by a 2-week rental verification After a 2-week trial of the air nozzle "Hayate," the following effects were confirmed: 1: Dewatering performance significantly improved, drastically reducing defective labels and NG products in image inspections. 2: Noise levels were reduced by approximately 15 dB(A) or more, eliminating the need for earplugs and greatly improving the working environment. 3: Contributed to significant reductions in CO₂ emissions, disposal costs, and power consumption. ■Unexpected "good troubles" after implementation? 1: After the introduction of Hayate, the operation was so quiet and comfortable that workers mistakenly thought "the dewatering device is not operating," leading to a temporary line halt. 2: An executive from outside the factory entered for an inspection, wondering, "Is the line stopped?" There were even pleasant trouble cases where people were surprised by how quiet it was. This is indeed proof of satisfaction with both the dewatering effect and noise reduction effect.

• nozzle

When manufacturing canned beverages, do you have any of the following issues? - Insufficient removal of water droplets - Inability to remove even with increased nozzles - Frequent printing defects - High rejection rates that cannot be improved - Loud air blow noise - High electricity costs - Need to reduce CO2 emissions... etc. All of the above concerns can be resolved with the air nozzle "Hayate." First, please take a look at the verification video to see how effectively water droplets can be removed.

• nozzle

Are you facing any of the following issues during the production of items such as "retort pouches," "vacuum packs," or "mini packs"? - Insufficient removal of water droplets and drainage - No improvement even after increasing the number of nozzles - Staff resorting to manual drying with towels - Frequent printing defects - High rejection rates that cannot be improved - Loud noise causing significant stress - The dewatering machine's nozzle needs replacement, resulting in regular hassle and high costs - The dewatering machine is large, making the factory space cramped - High electricity costs - Need to reduce CO2 emissions... etc. All of the above concerns can be resolved with the air nozzle "Hayate." First, please take a look at the verification video to see how effectively water droplets can be removed.

• nozzle

Struggling to effectively manage fumes generated during laser welding... For manufacturing sites facing such concerns, the air nozzle 'Hayate,' capable of laminar airflow, offers a new solution. We will detail how Hayate contributes to the efficient management of fumes, which has been challenging with existing air nozzles that generate significant turbulence. ●Challenges of Fumes in Laser Welding● - Fine metal vapor (fumes) is generated during irradiation, posing health risks. - Existing air nozzles create turbulent flow, making it easy for fumes to diffuse and linger in the surrounding area. - Diffused fumes can lead to decreased visibility and inspection accuracy. - They can cause machine malfunctions, resulting in reduced productivity. ●With Hayate, efficient transport and protection are possible● - Laminar airflow ensures a straight and stable air flow with minimal turbulence. - High directionality allows for stable transport of fumes towards the intended direction. - Efficient guidance to dust collection devices (vacuum systems) is achievable. ●Summary of Hayate's Features● ✅ Directional air makes it difficult for fumes to diffuse. ✅ High-level transport and protection through laminar curtain air. ✅ High wind speed, low noise, and ultra-energy-saving. ✅ Compatible with GX and contributes to CO₂ reduction.

• nozzle

Hayate can provide custom solutions tailored to each customer's specifications. First, please try our standard lineup with a free rental. If you have requests such as "I want it to be a bit more compact" or "I want the air supply to be horizontal," please feel free to consult with us. 【Custom Example】 To allow installation in narrow spaces, we compacted the 'Type F' and also changed the air supply port to a horizontal position. Additionally, we adjusted the air blow width to a custom size according to your preferences. ☆The left side of the image shows the standard Type F, and the right side shows the custom Type F☆ In this way, we can provide individually tailored nozzles that are optimal for your equipment. Let us contribute to your company's energy savings and improvements with 'Hayate'!

• nozzle

The inspection cameras used in manufacturing plants today perform high-precision inspections, and to prevent dirt from adhering to the camera lens, they are constantly protected by air blowing. However, the reality is that behind this, the invisible costs of air consumption due to long hours of operation lead to high electricity bills and CO₂ emissions. By simply replacing the air blow nozzle with "Hayate," energy savings and decarbonization can be rapidly accelerated. "Hayate" achieves overwhelming energy-saving performance and high-efficiency air blowing compared to conventional nozzles. It sends stable laminar air over long distances with minimal air volume, significantly reducing power consumption. Moreover, it is also possible to enhance protective performance. As a result, it contributes to the reduction of CO₂ emissions and is recognized as a response to GX (Green Transformation). However, one challenge that arises here is the light scattering on the inspection camera. Nozzles with a metallic sheen can interfere with the inspection images, causing defects. "Hayate" can be customized to a matte black specification to meet such on-site needs. It prevents unnecessary reflections, supports clean and efficient line operations without compromising inspection accuracy.

• nozzle

✅ Have you still put off reviewing your air nozzles? - Can't completely remove foreign objects or water droplets... - Concerned about high air usage and electricity costs... - Noise is loud, making the work environment poor... If you have such concerns, why not try 'Hayate' right now? ✅ What is Hayate? 'Hayate' is a next-generation air nozzle that efficiently removes foreign objects and water droplets using laminar flow air while achieving up to 1/5 the air consumption of conventional nozzles. ✅ Right now, you can experience the "actual effects" before implementation with a free rental! - Confirm the effectiveness of foreign object and water droplet removal in "your own workplace" - Experience usability, air power, and quietness firsthand - Comparison and verification with existing equipment is also possible ✅ If you're interested, feel free to reach out! Please contact us with "Rental Request" clearly stated. We will provide the most suitable 'Hayate' for your company! ✅ Experience "success" with Hayate. After the rental, many have expressed surprise with comments like "I can't believe how much it can remove!" and "I was amazed at how quiet it is." It's perfectly fine to just "try it out" first. Please feel free to consult with us!

• nozzle

In recent years, while efforts for energy conservation have accelerated, there is a dilemma on-site where removal performance and work efficiency cannot be compromised. Therefore, we would like to propose the high-performance air nozzle 'Hayate' with laminar flow air blow. 1. A design that does not compromise on energy savings or performance Hayate significantly reduces air consumption compared to conventional nozzles through its unique flow path design, while achieving stable air blow with high wind speed and long distance. This ensures energy savings while enabling high-level removal of foreign substances and water droplets. 2. High-precision removal with laminar flow air The straight and uniform laminar flow air effectively reaches details that are difficult to access with normal turbulence. It can accurately remove fine objects such as water droplets on food containers and dust on electronic components. 3. Quiet design for improved work environment Hayate not only achieves energy savings but also features a low-noise structure. It can be used with confidence even in production lines where noise control is necessary. 5. Ideal for initiatives related to GX and CSR As part of carbon pricing and GX compliance, it supports not only energy savings but also improvements in work quality and the environment.

• nozzle

■ Building Trust with Stakeholders In an era where clients and investors demand concrete environmental measures, the introduction of Hayate and its results serve as a powerful appeal to stakeholders. ✅ "84% Reduction in Rejection Rate" → Not only contributes to cost reduction but can also be utilized in environmental reports ✅ "99% Water Droplet Removal Rate" → Improvement in customer satisfaction through enhanced quality Such quantitative achievements provide a basis for trust in various contexts, including ESG evaluations, ISO 14001 compliance, and environmental audits. ■ Start Your First Step in GX from the Field with the Clearly Effective "Hayate" Why not start with Hayate? ✅ Reduction in energy costs ✅ Reduction in CO₂ emissions ✅ Noise control and improvement of the working environment ✅ Achievements of 84% reduction in rejection rate and 99% water droplet removal rate As a visible measure for GX, CSR, and stakeholder engagement, Hayate is now being chosen.

• nozzle

■ The Wave of On-Site Reform Brought by GX Carbon neutrality, decarbonization, sustainability. These are no longer just themes for management. Reevaluating energy use in manufacturing sites is the first step in promoting GX (Green Transformation). In this context, the high-performance air nozzle "Hayate" is gaining attention. Just by introducing it, up to 90% energy savings can be achieved compared to conventional air blowing. It is truly a representative example of "on-site GX" that contributes to GX while keeping capital investment in check. Furthermore, Hayate has already been implemented in many sites, yielding the following results: ✅ Beverage manufacturers: 84% reduction in rejection rate (improvement in direct hit rate, reduction in waste) ✅ Pharmaceutical manufacturers: Achieved 99% droplet removal rate (significantly contributed to yield improvement) Not only does it excel in energy-saving capabilities, but it also enhances basic blowing performance. Additionally, it supports CSR initiatives in the following ways: Reduction of noise levels → Improvement of work environment and safety considerations High-performance water and dust removal → Reduction of product loss through quality improvement This enables the deepening of CSR not only in environmental aspects but also in consideration for employees and the local community.

• nozzle

✅ Do you have any of these concerns with your existing nozzles? - High air consumption leading to high electricity costs... - Difficulty in removing foreign objects and water droplets... - Noise is a concern... We recommend the 'Hayate' series, which achieves both high performance and energy savings with laminar flow air! ✅ Switching to 'Hayate' can make a significant difference! We offer a "free" comparative estimate of CO₂ emissions and annual electricity costs based on your current nozzles and equipment conditions. ✅ Information needed for the estimate (examples): - Type and number of nozzles currently in use - Operating hours (◯ hours/day, ◯◯ days/month) - Air pressure used - Air generation cost per cubic meter (unknown is also acceptable) ✅ If you would like an estimate... Please feel free to contact us with "Estimate Request" clearly stated! We will provide a dedicated energy-saving estimate sheet for your company. ✅ What is 'Hayate'? - Excellent removal efficiency and distance with laminar flow air - Up to 1/5 reduction in air usage compared to conventional nozzles - Achieves energy savings, quiet operation, and high quality - Contributes to GX and CSR activities Why not start improving your equipment sustainably right away? We look forward to your inquiry.

• nozzle

As carbon pricing (carbon tax and emissions trading system) progresses, energy-saving measures that achieve both CO₂ reduction and cost reduction are being sought. Our air nozzle 'Hayate' significantly reduces the use of compressed air, helping to curb CO₂ emissions and contribute to alleviating the burden of carbon pricing! ◆ Benefits of Introducing the Air Nozzle 'Hayate' ✅ Reduces compressed air usage by up to 90% → Lowers electricity and fuel costs ✅ Reduces CO₂ emissions → Contributes to carbon pricing measures ✅ Easy installation → Can be directly implemented into existing equipment ✅ Improves working environment → Low-noise design enhances workplace conditions ◆ Response to GX (Green Transformation) and Carbon Pricing ✅ Achieve energy cost reduction and decarbonization simultaneously! ✅ Strengthen corporate competitiveness in response to stricter environmental regulations! ✅ Potential to utilize energy-saving investment promotion tax systems and subsidies! To companies concerned about the costs of carbon pricing! Why not realize GX promotion, cost reduction, and environmental measures with the introduction of 'Hayate'? ▶ Free demo unit rental and energy-saving estimates are currently available!

• nozzle

In order to promote GX (Green Transformation), the introduction of energy-saving technologies is being sought. Our ultra-high-performance air nozzle 'Hayate' significantly reduces the amount of compressed air used while also greatly improving the water droplet removal rate. It is an innovative product that achieves both the performance required for air blowing and energy-saving capabilities. ◆ Features of the high-performance air nozzle 'Hayate' ✅ Proven record of reducing energy costs by up to 90% ✅ Contributes to GX promotion through significant reduction of CO₂ emissions ✅ Improved working environment due to quiet design ✅ Easily replaceable with existing nozzles ✅ Addresses compressor capacity shortages ◆ Contribution to GX ✅ Reduction of carbon footprint through suppression of electricity and fuel consumption ✅ Potential eligibility for subsidies and grants ✅ Leads to the promotion of SDGs and ESG management For companies that are wondering, "I want to advance GX measures, but where should I start...". By introducing the air nozzle 'Hayate', you can easily achieve cost reduction and promote GX!

• nozzle

In fiber factories, air nozzles are essential for maintaining product quality and improving manufacturing efficiency. However, conventional air nozzles consume a lot of air, leading to increased CO2 emissions, higher running costs, noise issues, and maintenance burdens. The next-generation air nozzle "Hayate" addresses these challenges, achieving a reduction in environmental impact and an increase in productivity. 【Usage Scenarios】 - Removal of thread dust and debris - Air curtain for protecting quality inspection cameras from dirt - Ionizer specification for static electricity suppression - Drying after inkjet printing - Air discharge for defective and rejected products 【Benefits of Implementation】 - Significant reduction in CO2 emissions, leading to lower environmental impact - Reduction in running costs due to lower electricity bills - Improvement in work environment due to noise reduction - Decrease in maintenance efforts - Reduction in defective products due to improved product quality - Increased efficiency through enhanced productivity

• nozzle

In the automotive industry, air nozzles are essential for various applications such as removing water droplets and chips after parts cleaning, and addressing fume issues. However, traditional air nozzles consume a significant amount of air, leading to increased CO2 emissions and higher running costs, which have been longstanding challenges. The air nozzle "Hayate" significantly reduces air consumption with its unique technology, achieving both environmental impact reduction and cost savings. Additionally, it greatly enhances water droplet removal performance. It is a groundbreaking item that balances the required performance for air blowing with energy efficiency. 【Usage Scenarios】 - Welding fume control - Painting processes - Parts cleaning - Preventing dirt on inspection cameras - Assisting air transport 【Challenges】 - Increased CO2 emissions due to air consumption - Rising running costs - Noise issues - Product defects due to insufficient foreign object removal performance - Stoppages caused by transportability issues 【Effects of Implementation】 - Reduced environmental impact through decreased CO2 emissions - Lower running costs - Resolution of noise issues - Reduced defect rates due to improved product quality - Shortened operating time - Fume control through streamlining

• nozzle

In order to achieve carbon neutrality by 2050, emissions trading will officially start in Japan from the fiscal year 2026. "Hayate" is an air nozzle that excels in removing water droplets and foreign substances from container surfaces, significantly reduces air consumption, thereby lowering running costs and environmental impact, and also achieves low noise levels. There are proven results in CO2 reduction across various industries using this nozzle. You can try it out with a free rental. Why not take this opportunity to reassess your CO2 emissions? 【Features and Achievements】 - Despite extremely low air usage, it uniquely achieves high wind speed, film-like air, and long-distance air. - Reducing air usage decreases the load on compressors, which can reduce CO2 emissions and electricity costs. - Improved foreign substance removal performance allows for a reduction in the number of air nozzles needed. - There are no moving (wearing) parts in the internal structure, allowing for semi-permanent use. - Excellent removal performance enhances product quality and can reduce factory operating hours. *We are currently offering explanatory materials that include actual measurement data on air consumption and wind speed. Please feel free to contact us for inquiries.

• nozzle

When manufacturing paper pack beverages, do you have any of the following issues? - Insufficient removal of water droplets - Unable to remove even with additional nozzles - Frequent printing defects - High rejection rate with no improvement - Loud noise from air blow - High electricity costs - Need to reduce CO2 emissions...etc All of the above concerns can be resolved with the air nozzle "Hayate." First, please check out the verification video to see how effectively water droplets can be removed.

• nozzle

When manufacturing PET bottle beverages, do you have any of the following concerns? - Insufficient removal of water droplets and draining - Difficulty in removing water droplets, especially from the cap area - Unable to remove even with an increased number of nozzles - Frequent printing defects - High rejection rate that cannot be improved - Loud noise from air blow - High electricity costs - Need to reduce CO2 emissions...etc All of the above issues can be resolved with the air nozzle "Hayate." First, please take a look at the verification video to see how effectively water droplets can be removed.

• nozzle

The air nozzle "Hayate" is positioned as a durable production material (essentially unbreakable and usable semi-permanently) and is more expensive compared to consumable nozzles in the market. However, when you actually experience the foreign object removal effect and consider the energy-saving benefits (reduction in electricity costs and CO2 emissions), many customers choose to implement it. The average payback period for the introduction cost of "Hayate" is 6 months (according to our own research). Please consider not only the initial cost but also the removal efficiency and running costs. We are currently running a rental campaign. We encourage you to take this opportunity to experience and consider the air nozzle "Hayate"! 【Lineup】 ■Type-S: Discharges a thin sheet of air ■Type-F: Discharges a thin sheet of air, with selectable discharge width ■Type-G: Discharges air along a guide ■Type-V: Discharges air in a fan shape ■Type-W: Discharges fan-shaped power mist ■Type-T: Discharges air in a conical shape ■Type-C: Discharges cylindrical air for pinpoint use *For more details, please refer to the PDF materials or feel free to contact us.

• nozzle

Do you have any requests or concerns like the ones listed below? We are currently running a rental campaign. Please take this opportunity to experience the air nozzle "Hayate"! ■ Common concerns we often hear ■ "I want to reduce electricity costs." "I want to increase the water droplet removal rate." "I want to thoroughly remove cutting chips." "I want to reduce noise." "I want to reduce CO2 emissions." "I want to improve the transportability of light workpieces." 【Awards for the air nozzle "Hayate"】 ● Received the Grand Prize at the 49th Invention Award (2023) co-hosted by the Japan Invention Promotion Association and Nikkan Kogyo Shimbun. ● Received the Grand Prize at the Hyogo No.1 Monozukuri Award (2021). ● Received the Machinery and Robot Parts Award at the 19th "Super" Monozukuri Parts Award (2022) by Nikkan Kogyo Shimbun. ● Received the Excellence Award at the 35th Small and Medium Enterprises Excellent New Technology and New Product Award. ● Selected for the Kansai Monozukuri New Selection 2023 by the Kinki Bureau of Economy, Trade and Industry. ● Recommended by the Ministry of Economy, Trade and Industry to exhibit at the Japan PR booth at the G7 Osaka-Sakai Trade Ministers' Meeting (held on October 28-29, 2023).

• Other machine elements

●Simply replace your current air nozzle with 'Hayate'● Instead of updating your air compressor or making large-scale equipment changes, just replace your current air nozzle. One company was able to reduce their annual electricity costs by 470,000 yen by simply replacing just two nozzles. We encourage your company to try the air nozzle 'Hayate'! 【Lineup】 ■Type-S: Discharges thin sheets of air ■Type-F: Discharges thin sheets of air, with selectable discharge width ■Type-G: Discharges air along a guide ■Type-V: Discharges fan-shaped air ■Type-W: Discharges fan-shaped power mist ■Type-T: Discharges cone-shaped air ■Type-C: Discharges cylindrical air for pinpoint use *For more details, please refer to the PDF document or feel free to contact us.*

• nozzle

Many conventional nozzles are made of resin. Due to degradation over time caused by the surrounding environment and heat, they can break and require regular replacement. This leads to environmental burdens from the incineration or landfill of resin waste. On the other hand, "Hayate" is made of metal. It has no moving parts inside and is fundamentally unbreakable. It also considers environmental impact by reducing resin waste. It complies with PFAS regulations as well. "Hayate" is positioned not as a consumable but as production equipment and devices = durable production materials, and we hope it can be of service to your company. 【Product Lineup】 ■Type-G: Discharges air along a guide ■Type-F: Discharges air in a thin sheet, with selectable discharge width ■Type-S: Discharges air in a thin sheet ■Type-V: Discharges air in a fan shape ■Type-W: Discharges fan-shaped power mist ■Type-T: Discharges air in a conical shape ■Type-C: Discharges air in a cylindrical shape for pinpoint use *For more details, please refer to the PDF materials or feel free to contact us.

• nozzle

■Conventional Nozzle■ Turbulence occurs, resulting in significant energy loss. When the distance is increased due to turbulence, the airflow weakens. High air consumption = increased costs. High noise levels. ■Hayate■ Achieves astonishing high efficiency and energy savings through unique design. Attracts ambient air, achieving low consumption and high airflow. Realizes long-distance flat air of about 100mm. Quiet design reduces noise stress. The air nozzle 'Hayate' series is widely used in various industries such as beverages, food, pharmaceuticals, medical devices, electronic components, optics, can and bottle manufacturing, and the paper industry, with significant effectiveness. *For more details, please refer to the PDF document or feel free to contact us.*

• nozzle

■Noise is a form of pollution■ Noise has a negative impact on people and can cause stress and hearing loss. ■Noise from air nozzles■ Is the air nozzle you are using noisy? Is it making conversation difficult? Is the noise level exceeding the labor environment standard? Some nozzles exceed 90dB(A). This is the same noise level as that of a subway car with the windows open or inside a pachinko parlor. ■Noise reduction measures for air nozzles■ By using our air nozzle 'Hayate', you can achieve a noise reduction of more than -10dB(A) compared to conventional nozzles. This has an effect that feels like a reduction by half. ■Why is 'Hayate' quieter?■ It efficiently blows air with an extremely low air flow rate. By suppressing turbulence, it is possible to significantly reduce noise. This is a unique technology of 'Hayate'. The air nozzle 'Hayate' series is widely used in various industries, including beverages, food, pharmaceuticals, medical devices, electronic components, optics, can and bottle manufacturing, and the paper industry. For noise reduction and improvement of the working environment, please consider the air nozzle 'Hayate'. *For more details, please refer to the PDF materials or feel free to contact us.*

• nozzle

The Hayate series air nozzles are widely used in various industries such as beverages, food, pharmaceuticals, medical devices, electronic components, optics, can and bottle manufacturing, and the paper industry. ● The pinpoint type [Type C] is highly effective for removing water droplets from the cap of PET bottles. ● The selectable width type [Type F] is used for candy containers, retort pouches, and semiconductor components. ● The fan-shaped power mist type [Type W] is used as a cleaning nozzle for medical containers and cold dessert molds. ● The air discharge type [Type G] is also ideal for air transport. Please try the Hayate air nozzles for various applications! 【Product Lineup】 ■ Type G: Discharges air along a guide. ■ Type F: Discharges thin sheets of air with selectable discharge width. ■ Type S: Discharges thin sheets of air. ■ Type V: Discharges fan-shaped air. ■ Type W: Discharges fan-shaped power mist. ■ Type T: Discharges conical air. ■ Type C: Discharges cylindrical air for pinpoint use. *For more details, please refer to the PDF document or feel free to contact us.

• nozzle

Dear manufacturers of PET bottle beverages, do you have any of the following concerns? <<Commonly consulted issues>> ■ Inability to remove water droplets from the cap area ■ Numerous printing defects caused by water droplets ■ High rejection rate due to printing defects ■ Printing smudging ■ Need to accurately direct air to the inspection position ■ Desire to reduce rejection and defect rates All of these can be resolved with the air nozzle "Hayate." ------------------------------------------------------------------------------------- Here are some improvement results from one of our customers. 【Results of replacing the water droplet removal device for PET bottle caps with the Hayate unit】 ■ Significant improvement in rejection rate during printing inspection (0.05% ⇒ 0.008%) ■ Rejection rate drastically reduced from 1 in 2000 bottles to 1 in 14000 bottles ■ Additionally, annual electricity costs reduced by over 1 million yen ■ Annual CO2 emissions reduced by 15 tons We highly recommend trying the air nozzle "Hayate"! *Please feel free to contact us for more details.

• Other machine elements

Do you know how much electricity your air nozzle consumes? It is generally said that compressed air accounts for 20-30% of the total energy consumption in a factory. Customers who have used our air nozzle "Hayate Type F" have shared their satisfaction, stating that they have been able to reduce running costs and improve water droplet removal rates. If you are struggling with issues such as "wanting to remove water droplets and foreign substances," "wanting to reduce noise," or "wanting to cut running costs," we are currently offering free samples for loan. Please contact us for more information. 【Customer Feedback】 - Improved water droplet removal rate - Reduced printing and inspection defects - Lowered running costs, including electricity expenses - Recovered initial investment within three months - Improved working environment due to reduced noise - Space-saving installation ★ Investment recovery sample materials are also available. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "Hayate Type G" is a water droplet removal nozzle guide that enables precise and efficient water drainage by pinpointing air jets at the inspection position, thereby preventing detection errors. Its uniquely developed coanda tail shape creates an airflow that expels foreign substances, allowing for the removal of almost all contaminants from objects on the conveyor. 《For such concerns》 - I want to streamline water drainage before the external inspection of containers to reduce costs. - There are many detection errors due to insufficient water drainage. - I want to perform more pinpoint water drainage because the shape of the container is complex. - Light containers are not being transported smoothly. It can be utilized not only for external inspections but also for various applications. 【Features】 ■ The guide and nozzle are integrated. ■ Air is injected precisely at the inspection position. ■ Customizable according to the material and shape of the container. ■ Optimal for air transport, leveraging the guide shape. *For more details, please download the catalog or feel free to contact us.

• Other machine elements

Do you know how much electricity your air nozzle consumes? It is generally said that compressed air accounts for 20-30% of the total energy consumption in a factory. Customers who have used our air nozzle "Hayate Type F" have shared their satisfaction, stating that they have been able to reduce running costs and improve water droplet removal rates. If you are facing issues such as "wanting to remove water droplets and foreign substances," "wanting to reduce noise," or "wanting to cut running costs," we are currently offering free samples for loan. Please contact us for more information. 【Customer Feedback】 ■ Improved water droplet removal rate ■ Reduced printing and inspection defects ■ Reduced running costs, including electricity expenses ■ Recovered initial investment within three months ■ Improved working environment due to reduced noise ■ Installed in a space-saving manner ★ Investment recovery sample materials are also available. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "Hayate TypeS" is an air nozzle that significantly reduces high costs by minimizing air consumption to as low as 1/5. It is designed to match the shape of commonly used air nozzles, allowing for easy replacement from your currently used nozzle. By increasing the supply air pressure, you can maintain a low flow rate, enabling efficient performance improvement. 【Features】 ■ Easy replacement from conventional air nozzles ■ Amazing high airspeed with low flow rate ■ Powerful impact achieved through ultra-high efficiency ■ Consumption flow rate not proportional to air supply pressure ■ Quiet design reduces noise stress ■ Significant reduction in CO2 emissions *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "Hayate Series" is used in a wide range of industries, including beverages, food, pharmaceuticals, medical devices, electronic components, optics, can and bottle manufacturing, and the paper industry. The "Type-F," which allows you to choose the discharge width, is suitable for candy containers, retort pouches, and semiconductor components, while the "Type-W," which discharges a fan-shaped power mist, is ideal for medical containers and frozen dessert molds. Additionally, we offer a rich lineup including the "Type-S," which discharges a thin sheet of air, and the "Type-T," which discharges conical air. 【Product Lineup】 ■Type-G: Discharges air along a guide ■Type-F: Discharges a thin sheet of air, with selectable discharge width ■Type-S: Discharges a thin sheet of air ■Type-V: Discharges fan-shaped air ■Type-W: Discharges fan-shaped power mist ■Type-T: Discharges conical air ■Type-C: Discharges cylindrical air for pinpoint use *For more details, please refer to the PDF document or feel free to contact us.

• nozzle

**Awards** - Received the Grand Prize at the 49th Invention Awards (2023) co-hosted by the Japan Invention Promotion Association and Nikkan Kogyo Shimbun. - Received the Grand Prize at the Hyogo No.1 Manufacturing Award (2021). - Received the Machinery and Robot Parts Award at the 19th "Super" Manufacturing Parts Awards (2022) by Nikkan Kogyo Shimbun. - Received the Excellence Award at the 35th Small and Medium Enterprises Excellent New Technology and New Product Awards. - Selected for the Kansai Manufacturing Selection 2023 by the Kinki Bureau of Economy, Trade and Industry. - Recommended by the Ministry of Economy, Trade and Industry to exhibit at the Japan PR booth during the G7 Osaka-Sakai Trade Ministers' Meeting (held on October 28-29, 2023). If you have any requests or concerns like the following, please feel free to contact us: "I want to reduce electricity costs." "I want to increase the water droplet removal rate." "I want to thoroughly remove cutting chips." "I want to reduce noise." "I want to reduce CO2 emissions." "I want to improve the transportability of lightweight workpieces."

• Other machine elements

The "Hayate TypeS" is an air nozzle that significantly reduces high costs by minimizing air consumption by up to 1/5. It is designed to match the shape of commonly used air nozzles, making it easy to replace your current nozzle. By increasing the supply air pressure, you can control the flow rate, allowing for efficient performance improvements. 【Features】 ■ Easy replacement from conventional air nozzles ■ Amazing high airspeed with low flow rate ■ Achieves powerful impact through ultra-high efficiency ■ Consumption flow rate that does not increase in proportion to air supply pressure ■ Quiet design reduces noise stress ■ Significant reduction in CO2 emissions *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "Blow-Off Guide" is a droplet removal nozzle guide that enables precise and efficient water drainage by pinpointing air injection at the inspection position, thereby preventing detection errors. We can also consult based on the material and shape of the container. Please consult us even for containers that are difficult with conventional products. 《For these kinds of problems》 - We want to streamline water drainage before exterior inspection and reduce costs. - There are many detection errors due to insufficient water drainage. - We want to perform more pinpoint water drainage because the container shape is complex. It can be utilized not only for exterior inspection but also for various applications. 【Features】 ■ The guide and nozzle are integrated. ■ Air is injected at the inspection position with pinpoint accuracy. ■ Consultation is available based on the material and shape of the container. *For more details, please download the catalog or feel free to contact us.

• Other machine elements

All of the following concerns can be resolved with "Hayate." Please give it a try! <<Customer Concerns and Inquiries>> ■ I want to remove water droplets from the cap of a plastic bottle. ■ I want to simplify the water drainage process. ■ I want to remove water droplets while rotating the workpiece. ■ I want to reduce printing defects and inspection failures. ■ I want to accurately blow air at the inspection position. ■ I want to efficiently remove water droplets. ■ I want to dehydrate in a short time. ■ I want to install the removal device in a space-saving manner. ■ I want to remove water droplets from the product. ■ Defective products are flowing into the next process. ■ I want to lower the rejection rate and defect rate. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

Do you know how much electricity your air nozzle consumes? It is generally said that compressed air accounts for 20-30% of the total energy consumption in a factory. We have received feedback from customers using our air nozzle "Hayate," stating that they have "reduced running costs" and "improved water droplet removal rates." If you are facing issues such as "wanting to remove water droplets and foreign substances," "wanting to reduce noise," or "wanting to cut running costs," we are currently offering free samples for loan. Please contact us for more information. [Customer Feedback] - Improved water droplet removal rate - Reduced printing and inspection defects - Reduced running costs, including electricity expenses - Recovered initial investment within three months - Improved working environment due to reduced noise - Installed in a space-saving manner ★ Investment recovery sample materials are also available. *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements

The "Hayate Series" is used in a wide range of industries, including beverages, food, pharmaceuticals, medical devices, electronic components, optics, can and bottle manufacturing, and the paper industry. The "Type-F," which allows you to choose the discharge width, is suitable for candy containers, retort pouches, and semiconductor components, while the "Type-W," which discharges a fan-shaped power mist, is ideal for medical containers and frozen dessert molds. Additionally, we offer a rich lineup including the "Type-S," which discharges a thin sheet of air, and the "Type-T," which discharges a conical air. 【Product Lineup】 ■Type-G: Discharges air along a guide ■Type-F: Discharges a thin sheet of air, with selectable discharge width ■Type-S: Discharges a thin sheet of air ■Type-V: Discharges fan-shaped air ■Type-W: Discharges fan-shaped power mist ■Type-T: Discharges conical air ■Type-C: Discharges cylindrical air for pinpoint use *For more details, please refer to the PDF document or feel free to contact us.

• nozzle

Torie Engineering Co., Ltd. is engaged in the prototype manufacturing of pneumatic application equipment and pneumatic devices. In addition to pneumatic equipment, we also develop and manufacture specialized equipment such as dedicated machines, labor-saving devices, energy-saving equipment, and 3R-related devices. We are here to assist you with innovative proposals, flexible responses, and knowledge, from cost reduction to CO2 reduction. 【Features】 ■ Elimination of fixed ideas through innovative proposals ■ Simple ideas to avoid complexity ■ Wide-ranging capabilities beyond development, including assembly and machining ■ Abundant track record ■ Capable of handling niche fields *For more details, please download the PDF or feel free to contact us.

• Pneumatic Equipment

The "Water Droplet Removal Nozzle Guide" is a product that incorporates an air nozzle into a work guide used for transport conveyors and similar applications. Since a large volume of air flows over the surface of the guide, it can remove water droplets while rotating the workpiece due to air resistance. This allows for efficient draining of containers and helps prevent detection errors, while also contributing to energy savings due to low air consumption. 【Features】 ■ The uniquely developed retractable (Coandă) tail reduces residual water droplets. ■ High-speed air blows away surface water droplets, keeping the main body clean. ■ Compact width and length save space. ■ Easy replacement from existing guides. ★ Testing can be conducted by sending sample workpieces. * We are currently providing explanatory materials that include measured data on air consumption and wind speed. Please feel free to contact us.

• Other machine elements