岩田商会 List of Products and Services

The "TAF-1070" is a high-performance FEPM fluororubber sheet uniquely developed by Sugawa Rubber. It overcomes the challenges of chemical resistance and steam resistance that were issues with conventional FKM, while also possessing heat resistance, electrical insulation, and low odor retention. It demonstrates stable performance even in the harsh environments of semiconductor manufacturing and chemical plants where acids, alkalis, and amine-based chemicals are present. It achieves a longer lifespan for gaskets and sealing materials, reducing maintenance burdens. 【Features】 - Heat resistance, chemical resistance, steam resistance, electrical insulation, low odor retention - Excellent durability against acids, alkalis, and amine chemicals - Compatible with various processing and molding (sheets, molds, extrusions, etc.) We can also accommodate customer needs with processed products from sheets, molded products, tubes, and extruded round cords. *For detailed property data, please download the PDF below or feel free to contact us.

• Rubber

"NAGASEP" is a silicone hollow fiber gas separation membrane that excels in hydrophobicity and selective permeability for organic substances. It has a heat resistance of 200°C and can be sterilized using direct steam or autoclave sterilization methods in animal cell culture. Additionally, it is resistant to organic solvents, allowing for the separation and recovery of volatile organic compounds (VOCs) from wastewater and mixed gases. 【Features】 ■ Almost no degradation from ultraviolet light ■ Long-term use is possible due to its homogeneous membrane, which eliminates concerns about clogging ■ The ultra-fine type of hollow fiber membrane allows for compact equipment design ■ The hollow fiber membrane type can be modularized with a minimum membrane thickness of 0.02mm *For more details, please download the PDF or feel free to contact us.

• Other separation and analysis equipment
• Deaeration device

"TAF-1070" is a FEPM sheet with improved heat resistance and chemical resistance, made from a unique formulation by Sugawa Rubber. FEPM is a material that possesses characteristics such as heat resistance, chemical resistance, steam resistance, electrical insulation, and low odor retention. It addresses the challenges of chemical resistance and steam resistance that were weaknesses of FKM (general-purpose fluororubber). Additionally, we support sheets, processed products from sheets, molded products, extruded products such as tubes and round cords, and various types of molding. [Features of FEPM] - Heat resistance, chemical resistance, steam resistance, electrical insulation, low odor retention - Excellent durability against inorganic acids, inorganic alkalis, and amine-based chemicals, and is increasingly adopted in many industries. *For more details, please download the PDF or feel free to contact us.

• Rubber

Iwata Shokai Co., Ltd. Advanced Materials Division offers a range of materials essential for semiconductor manufacturing processes, including silicon wafers, resists, PTFE/PFA components, equipment, coordination of clean rooms, and research facilities, as well as cleanliness management, catering to customer needs both domestically and internationally. The "clean environment creation" undertaken by this division is in high demand not only in the IT industry but also in the pharmaceutical and food sectors. Particle measurement devices and clean room-related equipment and components are utilized as quality control standards by a wide range of users beyond the semiconductor field. 【Products Offered】 ■ Electronic Grade (EL) Chemicals ■ Materials and Components ■ Various Measuring Instruments ■ Equipment Related ■ Consumables *For more details, please download the PDF or feel free to contact us.

• Other semiconductors

Seibu Corporation aims for total system engineering in mechatronics. We design and construct clean rooms for production facilities such as medical devices and food, as well as peripheral equipment for clean rooms (air showers, draft chambers, clean benches, etc.), industrial resin tanks made of PVC, PP, etc., and we can also manufacture individual items and PVC ducts. Additionally, we accept orders for custom-made clean booths according to your requirements. 【Services Offered】 ■ Design and construction of clean rooms for production facilities such as medical devices and food ■ Custom design and production of various draft systems, chemical supply systems, cleaning devices related to semiconductors ■ Manufacturing of custom-made clean booths *For more details, please refer to the PDF materials or feel free to contact us.

• Calibration and repair

STI Corporation has successfully synthesized and manufactured ultra-high purity silicon carbide (SiC) powder exceeding 99.9999% purity using silica powder (SiO2) and carbon powder (carbon) as raw materials, through processes of uniform powder mixing, high-purity powder sintering, and particle size classification. We will supply ultra-high purity SiC powder for next-generation power semiconductors.

• Other polymer materials

"Silica Join AG" is a silver ion-based inorganic antibacterial agent powder that exhibits antibacterial properties. Silver ions have antibacterial effects against a wide range of bacteria, molds, and yeasts. Additionally, it is primarily composed of inorganic materials, providing heat and water resistance. It is made up of low-toxicity inorganic components, ensuring excellent safety, and can be processed into antibacterial products when applied to fibers and plastics. 【Features】 ■ Achieves top-class cost performance in the industry ■ High antibacterial performance with excellent immediacy and durability ■ Minimizes discoloration caused by silver ions ■ The carriers for silver ions include glass and zeolite with different physical properties, allowing selection based on the application of processed products, resin, and processing methods ■ It is a white powder that can be applied to various processed products *For more details, please download the PDF or feel free to contact us.

• Disinfecting and antibacterial products

"Surfsoab" is a silica-based inorganic deodorizing powder with excellent deodorizing performance. Through chemical adsorption involving reactions, it captures and immobilizes unpleasant odors and harmful gases. Its deodorizing performance is extremely high, with excellent immediacy and persistence. It is effective against ammonia, trimethylamine, acetic acid, isobutyric acid, methyl mercaptan, hydrogen sulfide, acetaldehyde, and formaldehyde. 【Features】 ■ Extremely high deodorizing performance with excellent immediacy and persistence ■ Does not re-release adsorbed gases due to chemical adsorption power ■ Composed of low-toxicity components, ensuring high safety ■ Mainly consists of inorganic substances, providing heat and water resistance ■ Available as a white or light-colored powder, applicable to various processed products *For more details, please download the PDF or feel free to contact us.

• Deodorizing and anti-odor products

"Pure Cleanser" is a water treatment device that uses Advanced Oxidation Process (AOP). This device generates powerful OH radicals by integrating ozone, ultraviolet light, and photocatalysts. While ozone, ultraviolet light, and photocatalysts each have sterilization effects, OH radicals perform sterilization and purification (organic matter decomposition) with a synergistic effect several times greater than their individual actions. 【Features of Utilizing Advanced Oxidation Process (AOP)】 ■ Efficiently decomposes organic substances ■ Decomposition efficiency is over 20 times that of chlorine and over 5 times that of ozone alone ■ Generates few by-products, making it environmentally friendly *For more details, please download the PDF or feel free to contact us.

• Water treatment equipment

"FRIENDLY" is a water-soluble waste liquid treatment device that can significantly reduce the amount of waste liquid collected by waste disposal companies without incurring large costs. It enables safe and highly efficient treatment using a "reduced pressure distillation method" that does not use open flames, and the generation of unpleasant odors or harmful substances due to heating during processing is extremely low. Additionally, it achieves a high concentration ratio, significantly reducing waste liquid treatment costs. It can accommodate various types of water-soluble waste liquids. 【Features】 ■ Reduction of environmental impact ■ Cost reduction ■ No unpleasant odors ■ Reduction of water usage ■ Reduction of processing energy *For more details, please download the PDF or feel free to contact us.

• Wastewater/wastewater treatment equipment

The "O3MAX Water System" is an ozone generator that can instantly produce high-purity ozone water for disinfection and deodorization. Thanks to its unique technology, it electrolyzes water directly and generates ozone water immediately with just a turn of the faucet. Since it can supply ozone water stably using only tap water without any chemicals, it has been widely adopted in factories of major food industry companies, where strict hygiene management is required for disinfecting and deodorizing materials, equipment, and utensils. 【Features】 ■ Instantly converts tap water into ozone water for disinfection and deodorization ■ Easy installation with simple construction ■ Utilizes our proprietary WOP technology (Advanced Hydroxylation Process Technology) ■ Low running costs without the need for additives or auxiliary agents *For more details, please download the PDF or feel free to contact us.

• Ozone Generator

"MAX Nanobubble" is a nanobubble generation device that can be easily installed in water pipes with simple construction. Urinary stones, which cannot be removed with regular tap water, can be detached by installing MAX nanobubble water, promoting their removal. Continued use can suppress the growth of new urinary stones and is also suitable for cleaning drainage pipes. Additionally, this product generates bubbles that are so small they are nearly invisible (ultra-fine bubbles) without using complex equipment, thanks to our unique technology. 【Features】 ■ Removes urinary stones and suppresses odors and urinary stone growth with MAX nanobubble water ■ Exhibits excellent cleaning power with our unique ultra-small nanobubbles ■ Easy installation when paired with the "O3MAX System" ■ Suitable for cost-cutting as it does not require regular maintenance for hygiene or cleaning *For more details, please download the PDF or feel free to contact us.

• Other cleaning machines

We handle products from SNK Corporation. We offer SiC substrates (such as 6 inches), GaAs, GaN, Ga2O3, Ga2O3 Epi, InP wafers, and other sizes ranging from 2 to 4 inches and other inch sizes as well. Additionally, we support thermal oxide films, SiN, various metal films, and porous silicon processing. 【Product Lineup】 ■ Silicon wafers ■ Various substrates other than silicon wafers ■ Various film deposition processes ■ Various wafer processing *For more details, please download the PDF or feel free to contact us.

• Wafer
• Other semiconductors

The "Unipore Inline Filter IRF Series" that we handle is a compact filter for gas filtration using hollow fiber membrane filters. It is suitable for areas requiring clean air, such as semiconductor manufacturing, food machinery, analytical instruments, and medical devices, due to its high filtration precision. Additionally, it employs a high-precision hollow fiber membrane, with a filtration accuracy of 0.003μm (3nm). It is made entirely of resin. 【Features】 ■ Uses high-precision hollow fiber membranes ■ Filtration accuracy of 0.003μm (3nm) ■ Compared to membrane filters other than hollow fiber membranes, it contributes to space-saving, low pressure loss, and longer lifespan due to its larger membrane area per unit area ■ Made entirely of resin *For more details, please download the PDF or feel free to contact us.

• Filtration Filter
• Filters

We would like to introduce the "Inline Filter KUB Series" that we handle. This filter is suitable for installation in analytical instruments, medical devices, semiconductor manufacturing equipment, etc., with high filtration precision and a clean double packaging specification. The hollow fiber membrane consists of individual fibers shaped like straws, with fine pores on the membrane surface that remove particles and water droplets, allowing clean air to be obtained from the inside of the membrane. 【Features】 ■ Utilizes a high filtration precision hollow fiber membrane ■ Filtration precision of 0.003μm (3nm) ■ Small, lightweight, and compact ■ 1/4" tube connection ■ All-plastic construction ■ Clean double packaging specification *For more details, please download the PDF or feel free to contact us.

• Filtration Filter
• Filters

We would like to introduce the "New High Mini Air Filter NHM Series" that we handle. It is suitable for applications such as filtering supply air for gas analysis equipment, filtering supply air for semiconductor manufacturing equipment, and filters for intake and exhaust in medical devices. Additionally, it offers selectable connection shapes, including quick-connect (φ4, φ6, φ8) and threaded connections (3/8, Rc1/4). 【Features】 ■ Adopts high filtration precision hollow fiber membrane ■ Filtration precision is 0.003μm (3nm) ■ Small, lightweight, and compact ■ Selectable connection shapes ■ Clean double packaging specification *For more details, please download the PDF or feel free to contact us.

• Air Filter
• Filtration Filter
• Filters

We would like to introduce the "Unipoar PP Air Gun" that we handle. The fluid used is compressed air or nitrogen, with a maximum operating pressure of 0.4 MPa and a temperature range of 5 to 50°C. Additionally, it is oil-free and suitable for clean rooms, and we offer an optional olefin-based coil hose. 【Features】 ■ Equipped with a 0.01μm hollow fiber membrane filter at the tip ■ Compact, lightweight, and high flow rate ■ Oil-free and clean room specifications ■ Improved chemical resistance of the main body compared to conventional products (CAGN-14) ■ Optional olefin-based coil hose available *For more details, please download the PDF or feel free to contact us.

• Other cleaning machines

The "Water Gun" is a hand spray suitable for pure precision cleaning, such as printed circuit board cleaning and precision machinery cleaning. The wetted parts are made only of polypropylene and fluororubber, eliminating issues with metal ion leaching and rust. Additionally, depending on the application, you can choose from the main unit only, with a hose, or with a bacteria prevention branching tee, and we offer polypropylene resin coil hoses and spray nozzles as options. 【Features】 ■ Wetted parts are made only of polypropylene and fluororubber ■ For precision cleaning items (oil-free) ■ Choose from the main unit only, with a hose, or with a bacteria prevention branching tee according to your application ■ Polypropylene resin coil hoses and spray nozzles are available as options ■ Improved joint strength with the adoption of new fittings *For more details, please download the PDF or feel free to contact us.

• Other cleaning

We would like to introduce the "Unipo Air Gun" that we handle. It features a 0.01μm hollow fiber membrane filter at the tip, and is compact, lightweight, and has a high flow rate. Additionally, it is oil-free and suitable for clean room use, with the operating fluids being compressed air and nitrogen. The maximum operating pressure is 0.4MPa. Please feel free to contact us if you have any inquiries. 【Features】 ■ Equipped with a 0.01μm hollow fiber membrane filter at the tip ■ Compact, lightweight, high flow rate ■ Oil-free and clean room compatible *For more details, please download the PDF or feel free to contact us.

• Other cleaning

The "Polyfix F50 Series and FD Series" that we handle are capsule filters using high-efficiency hollow fiber membranes. They are suitable for laboratory applications where large amounts of chemicals cannot be used, for applications in limited installation spaces just before the use point, and for small-scale production before mass production. Additionally, with high foreign matter removal capability and a distinctive hollow fiber membrane structure, they demonstrate excellent capture ability for particulate and gel-like foreign substances. 【Features】 ■ Made of all polyolefin (polypropylene, polyethylene) ■ High foreign matter removal capability ■ Reduced chemical loss *For more details, please download the PDF or feel free to contact us.

• Filtration Filter
• Filters

We would like to introduce the "Polyfix F70 Series" hollow fiber membrane filter that we handle. With a large filtration area, it achieves high flow rates, low pressure loss, and long lifespan, contributing to increased productivity. It has a wide lineup of pore sizes ranging from 5nm to 0.2μm, and its distinctive hollow fiber membrane structure demonstrates excellent capture capability for particulate and gel-like contaminants. 【Features】 ■ Made of all polyolefin (polypropylene, polyethylene) ■ High contaminant removal capability ■ High flow rate, low pressure loss, long lifespan *For more details, please download the PDF or feel free to contact us.

• Filtration Filter
• Filters

The "Polyfix FT Series and F34 Series" that we handle are compact filters using high-volume efficiency hollow fiber membranes. They can be used compactly for applications involving expensive chemicals that cannot be used in large quantities, as well as for simple testing in laboratories. Additionally, because they are made of all polyolefin resin, they have a wider range of chemical resistance and lower elution compared to typical hollow fiber membrane filters. 【Features】 ■ Made of all polyolefin resin ■ High foreign matter removal capability ■ Ultra-compact design *For more details, please download the PDF or feel free to contact us.

• Filtration Filter
• Filters

The "Polyfix PE Series" is a polyethylene hollow fiber membrane filter designed for high flow rates, long lifespan, and clean liquids. By applying a special cleaning process, it suppresses elution from the filter, making it suitable for filtering high-purity chemicals used in semiconductors. Additionally, its distinctive hollow fiber membrane structure demonstrates a high capability for removing gel-like contaminants, and the combination of special materials and cleaning treatments reduces the elution of metals and organic substances. 【Features】 ■ High contaminant removal capability ■ Low elution ■ High flow rate, low pressure loss, long lifespan *For more details, please download the PDF or feel free to contact us.

• Filtration Filter
• Filters

"Polyfix Nylon" is a liquid nylon filter suitable for the removal of gel-like foreign substances. It demonstrates a high ability to remove gel-like foreign substances due to its thick membrane structure and hydrophilic nylon material, contributing to improved productivity in the filtration process with its large filtration area from the hollow fiber membrane filter structure. Additionally, by applying special cleaning, it suppresses elution from the filter, making it suitable for the filtration of high-purity chemicals in semiconductors. 【Features】 ■ High gel-like foreign substance removal capability ■ Low elution ■ High flow rate, low pressure loss, long lifespan *For more details, please download the PDF or feel free to contact us.

• Filters
• Filtration Filter

We would like to introduce the "Humidity Control Device" that we handle. It has a high responsiveness and can quickly control the humidity in localized spaces, and it uses a non-heater humidification method, making it energy-efficient. Additionally, it features simple operability, allowing you to set the desired humidity with just a few adjustments, and it comes in a compact size suitable for desktop use. No installation work is required. 【Features】 ■ Fast humidity adjustment ■ Wide range of humidity settings ■ Heater-less humidification ■ Clean humidification ■ Easy operability ■ Compact *For more details, please download the PDF or feel free to contact us.

• Humidification device
• Dehumidifier

The "IAD Series" is an inline compact membrane dryer that uses a high polymer material that is very difficult for oxygen and nitrogen to pass through, while allowing water vapor to permeate easily, in order to remove water vapor from fluids. When compressed air is passed through the inside of the hollow fiber membrane made from this material, only water vapor is discharged to the outside, resulting in dry air at the outlet side. Furthermore, by returning a portion of this dry air back to the outlet side, continuous dehumidification is achieved. 【Features】 ■ Lightweight and compact inline design ■ No drain processing required (removed moisture is exhausted as water vapor) ■ Three types available based on capacity (30R/min, 100R/min, 200R/min) ■ Can be used in explosion-proof environments as it does not require power supply ■ Compliant with RoHS regulations *For more details, please download the PDF or feel free to contact us.

• Drying Equipment

This device uses MF to RO membranes and is a membrane filtration system that can be used for various applications such as purification, concentration, separation, and clarification. The advantages of this device include high filtration accuracy, efficient concentration, and improved manageability from the transition from diatomaceous earth filtration. The flat membrane test is free, so please feel free to contact us. 【Flow of the Flat Membrane Test】 1. Install the flat membrane in the test device (SEPA) and connect the piping. 2. Before the concentration test, flow pure water and measure the amount of pure water permeate. 3. Flow the sample water and conduct the concentration test. 4. After the concentration test, flow pure water and measure the amount of pure water permeate. 5. Perform chemical cleaning according to the membrane specifications and sample water. 6. Repeat steps 2 to 5 three times. *For more details, please download the PDF or feel free to contact us.

• Filtration Equipment
• Other filtration and separation equipment
• Filtration Equipment

We would like to introduce the "membrane device" that we handle. The structure is a spiral element type that allows for the separation of low-concentration permeate water and high-concentration concentrate water from a source water of a certain concentration by using a membrane. It can be used for various applications such as sterilization of mineral water (MF membrane, UF membrane) and concentration of milk and soy milk (RO membrane). 【Advantages of Membrane Filtration】 ■ Alternative to Diatomaceous Earth Filtration - Less waste generated from filtration materials - No need for clarifying agents, clarifying tanks, or standing time ■ Purification and concentration without heat or chemicals - Suppression of component denaturation (taste changes) due to heating or chemicals - Sterilization without heating *For more details, please download the PDF or feel free to contact us.

• Filtration Equipment
• Other filtration and separation equipment
• Filtration Equipment

This product is a PP tray/container that reduces the amount of virgin plastic derived from petroleum by incorporating recycled materials, thereby contributing to a reduction in environmental impact. Since it uses waste generated during the manufacturing process known as pre-consumer recycled material, it is managed with stable quality, unlike waste collected from used products in the market. Additionally, we can supply it at a lower price compared to virgin products. 【Features】 ■ Reduction of environmental impact ■ Heat resistance and cold resistance ■ Physical properties and quality are at the same level as virgin PP (Recycled material uses the same edge trim generated from virgin grade) *For more details, please download the PDF or feel free to contact us.

• tray
• Bottles and containers
• tray

In this document, we introduce the "filter products" that our company handles. We offer a lineup that includes "all-stainless steel filtration filters" using metal sintered mesh and "all-stainless steel strainers" using precision etching processing. We have included the features and material compositions of each product, so please take a moment to read through it. 【Featured Products (Excerpt)】 ■ Sascscreen Cartridge ■ Sintered Mesh Cartridge ■ Metal Fiber Cartridge ■ Sintered Mesh Cartridge (High Filtration Area Type) ■ Metal Fiber Cartridge (High Filtration Area Type) *For more details, please download the PDF or feel free to contact us.

• Filters

We would like to introduce "Autolock (sodium hypochlorite)" that we handle. It can be used for sterilizing tap water and pools, as a bleach, and for disinfecting and cleaning vegetables, etc.! We offer 20kg poly cans, 200kg containers, and 1-ton containers, as well as a handy lightweight 5kg container. Please feel free to contact us when you need it. 【Product Lineup】 ■1-ton container ■200kg drum ■20kg poly can ■5kg poly can (handy can) *For more details, please feel free to contact us.

• Chemicals

We would like to introduce "Hydrochloric Acid (35% and 17.5%)" that we handle. This product is for industrial use, and its main applications include the production of monosodium glutamate, soy sauce, dyes and intermediates, fragrances, pharmaceuticals, and pesticides. The packaging is as follows: the 35% product is available in 22kg plastic cans and 200kg drums, while the 17.5% product is available in 20kg plastic cans. 【Product Lineup】 ■35% Product ・22kg Plastic Can ・200kg Drum ■17.5% Product ・20kg Plastic Can *For more details, please feel free to contact us.

• Chemicals

We would like to introduce "Concentrated Sulfuric Acid (98%)" that we handle. This product is for industrial use, and its main applications include raw materials for fertilizers, textiles, paper, metal refining, steelmaking, and food. We offer it in 25kg poly cans and 180kg drums. Please feel free to contact us when you need to place an order. 【Product Lineup】 ■ 25kg Poly Can ■ 180kg Drum *For more details, please feel free to contact us.

• Chemicals

We would like to introduce "Dilute Sulfuric Acid (78%, 75%, 62.5%, 50%)" that we handle. This product is for industrial use, and its main applications include raw materials for fertilizers, textiles, paper, metal refining, steelmaking, and food. Additionally, the packaging options are as follows: the 78% product is available in 25kg poly cans, 160kg drums, and 1,500kg containers; the 75% product is available in 20kg poly cans, 160kg drums, and 1,500kg containers; and the 62.5% and 50% products are available in 25kg poly cans. 【Product Lineup (Partial)】 ■ 78% Product - 25kg Poly Can - 160kg Drum - 1,500kg Container ■ 75% Product - 20kg Poly Can - 160kg Drum - 1,500kg Container *For more details, please feel free to contact us.

• Chemicals

We would like to introduce "Refined Sulfuric Acid (98% and 70%)" that we handle. Recommended uses include fertilizers, synthetic fibers, synthetic resins, inorganic chemicals, batteries, electronic components, plating, and general industrial applications. The packaging for the 98% product is a 20kg plastic can, while the 70% product is available in a 20kg plastic can, 200kg drum, and 1,500kg container. 【Product Lineup】 ■ 98% Product - 20kg Plastic Can ■ 70% Product - 20kg Plastic Can - 200kg Drum - 1,500kg Container *For more details, please feel free to contact us.

• Chemicals

We would like to introduce "Dilute Nitric Acid (67.5% and 30%)" that we handle. The packaging for 67.5% is available in 25kg plastic cans and 250kg drums, while 30% is available in 20kg plastic cans. Please feel free to contact us when you need to place an order. 【Product Lineup】 ■67.5% ・25kg plastic can ・250kg drum ■30% ・20kg plastic can *For more details, please feel free to contact us.

• Chemicals

We would like to introduce our "Liquid Caustic Soda (48% and 25%)" that we handle. This product is for industrial use, and its main applications include the production of artificial silk, fluff, cellophane, synthetic fibers, various soda salts, water softeners, electrolyte for alkaline batteries, and cosmetic ingredients. Additionally, the packaging is as follows: the 48% product is available in 25kg poly cans, 250kg drums, and 1,400kg containers, while the 25% product comes in 20kg poly cans, 200kg drums, and 1,200kg containers. 【Product Lineup】 ■48% Product - 25kg Poly Can - 250kg Drum - 1,400kg Container ■25% Product - 20kg Poly Can - 200kg Drum - 1,200kg Container *For more details, please feel free to contact us.

• Chemicals

We would like to introduce "PAC/Poly Aluminum Chloride (10%)" that we handle. Recommended uses include water treatment agents, papermaking agents, wastewater treatment agents, and civil engineering agents. Additionally, we offer packaging options of 25kg poly cans, 200kg drums, 1,000kg containers, and 25kg BIB. 【Product Lineup】 ■ 25kg Poly Can ■ 200kg Drum ■ 1,000kg Container ■ 25kg BIB *For more details, please feel free to contact us.

• Chemicals

We would like to introduce "Ferric Chloride," which we handle. This product is for industrial use, and its main applications include printed wiring, nameplates, shadow masks (metal plate etching solution), wastewater treatment (sewage purification sedimentation agent), photographic plate making, measuring instruments, catalysts, etc. Additionally, we offer the following packaging options: 25kg plastic cans, 250kg drums, 1,000kg containers, and 25kg BIBs. 【Product Lineup】 ■ 25kg plastic can ■ 250kg drum ■ 1,000kg container ■ 25kg BIB *For more details, please feel free to contact us.

• Chemicals