コニック List of Products and Services

This catalog introduces the press brake die "EURO." It features items such as the "Standard Punch and Goose Neck Punch (88°)," "Sash Punch and Burring Escape Punch (90°)," and "1V Die." The cutting edge (forming processing part) has been hardened to HRC54-60, making it extremely resistant to wear and providing high durability, while also contributing to cost reduction. 【Featured Products (Partial)】 <Punches> ■ Standard Punch and Goose Neck Punch (88°) ■ Sash Punch and Burring Escape Punch (88°) ■ Straight Blade Punch (88°) ■ Standard Punch and Goose Neck Punch (90°) ■ Sash Punch and Burring Escape Punch (90°) *For more details, please refer to the PDF document or feel free to contact us.

• Other molds

This catalog introduces the bending die "CEFH." It includes "standard shape and sash shape (86°)," "gooseneck shape and straight blade shape (88°)," and "CEFH die," among others. Even if the cutting edge (forming processing part) wears out, it can be re-sharpened, allowing for long-term use, which is effective in reducing die purchase costs. 【Featured Products (Excerpt)】 <Punch> ■ Standard shape and sash shape (86°) ■ Gooseneck shape and straight blade shape (86°) ■ Standard shape and sash shape (88°) ■ Gooseneck shape and straight blade shape (88°) ■ Standard shape and sash shape (90°) *For more details, please refer to the PDF document or feel free to contact us.

• Other molds

The "One Clamp Fitting" is a product that can accommodate all types of punch clamps. Even with older machines, by simply replacing the intermediate plate fittings, it is possible to use one-touch, fall prevention groove, and straight types of punches. It achieves improved productivity. 【Features】 ■ Reduces the cost of intermediate plate replacement ■ Compatible with all types of punch clamps ■ Achieves improved productivity ■ Compatible clamp types ・One-touch type / Fall prevention groove type / Straight type *For more details, please refer to the PDF document or feel free to contact us.

• Mold Design
• Other molds

"Using different press brake machines for each mold is inefficient." "I am considering replacing the intermediate plates of old machines, but I am troubled by the costs." Do you have such concerns? By simply replacing the front fittings of the old intermediate plates with 'multi-clamp fittings', you can install a straight-type punch with a one-touch, drop prevention groove. This enables efficient bending processing. 【Features】 ■ Just replace the front fittings of the old intermediate plates with multi-clamp fittings ■ Allows for the installation of a straight-type punch with a one-touch, drop prevention groove ■ Achieves efficient bending processing *For more details, please refer to the PDF document or feel free to contact us.

• Mold Design
• Other molds

"WING BEND" is a mold specifically designed for preventing bending defects. It allows for short flange processing, high-precision obtuse angle bending, and R-angle bending. One type of mold can accommodate a wide range of plate thicknesses, eliminating deformation of holes and slot shapes near the bend. Additionally, we offer "WING BEND Plus," which maintains the features of WING BEND while enhancing the effect of reducing defects. 【Features】 ■ Reduces bending defects ■ Capable of short flange processing ■ Eliminates deformation of holes and slot shapes near the bend ■ Improves repeatability accuracy of bending ■ Allows for high-precision obtuse angle bending and R-angle bending *For more details, please refer to the PDF document or feel free to contact us.

• Mold Design
• Other molds

"Good Luck" is a slim and multi-storage press brake mold storage rack. It features a bearing slide system, making it easy to slide the shelves in and out. It also comes with a stopper to prevent drawers from popping out. Additionally, the sliding shelves are made of rust-resistant galvanized steel plates and are equipped with adjustable height adjusters. 【Features】 - The top surface is covered with rubber sheet - Comes with a stopper to prevent drawers from popping out - Easy to slide the shelves in and out - Trim rubber is attached to the side of the handle for injury prevention - Sliding shelves are made of rust-resistant galvanized steel plates *For more details, please refer to the PDF document or feel free to contact us.

• rack
• Storage

The DPM-2 is a digital angle gauge that allows you to easily see the bending angle at a glance. It achieves high work efficiency with a stabilization time of 3 seconds for the angle display after installation. It features two types of angle measurement modes and includes a function that automatically reverses the display even if the main unit is installed upside down. 【Features】 ■ Adopts two types of angle measurement modes ■ Stabilization time for angle display after installation is 3 seconds ■ Automatic display reversal even when the main unit is installed upside down ■ The set angle measurement mode is retained even when the power is turned off ■ Equipped with a strong magnet on the bottom for secure attachment to the workpiece *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

"DANSAR" can perform step bending processing equivalent to the thickness of the plate. If there are no interference parts in the bending direction, "DANSAR-S, L, LL" is suitable. For step bending excluding interference parts, "DANSAR-77, 88" is recommended, and if both ends are raised upwards, "DANSAR-7, 7a, 8, 8a" is appropriate. The minimum flange can be up to 10mm. Please feel free to consult us when needed. 【Lineup (partial)】 ■DANSAR-S ■DANSAR-L ■DANSAR-LL ■DANSAR-7 ■DANSAR-7a *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other molds

This catalog introduces the long-lasting punches handled by Konic Corporation. We offer a lineup including the extremely wear-resistant "Super Dry Punch," the mold with improved high-temperature durability "Heavy Duty Punch," the "Konic Long Life Punch" that exhibits outstanding durability, and the "Konic Hard Punch" that reduces welding phenomena. Please use this information for product selection. [Contents] ■ Super Dry Punch (SDP) ■ Heavy Duty Punch (HDP) ■ Konic Long Life Punch (CLP) ■ Konic Hard Punch (CHP) ■ Surface Treatment Variations (Suitability) *For more details, please refer to the PDF document or feel free to contact us.

• Other molds

This catalog introduces peripheral items that support punching processing. We offer a variety of products, including the "Markless Sticker," which improves sheet metal quality with easy application and low cost; "Mori Paste," which prevents wear and seizure at the sliding parts of the punch body and guide; and "Extra Guide & Extra Die Guide," which allows for easy size upgrades of molds. Please use this for selecting products. 【Lineup】 ■ Markless Sticker ■ Urethane Kicker Set (L) ■ Brush Die *For more details, please refer to the PDF document or feel free to contact us.

• Other molds
• Other consumables

The "Nesting Die" is a mold designed to prevent interference between the work clamp and the die guide during the cutting of multiple parts or when nesting, by providing relief on the die and stripper plate. This results in reduced clamping margins and improved material yield. In addition to clamp relief, molds for part relief and both-side relief can also be produced. 【Features】 ■ Mold with relief on the die and stripper plate ■ Reduced clamping margins and improved material yield ■ Molds for part relief and both-side relief can also be produced *For more details, please refer to the PDF document or feel free to contact us.

• Other molds

The "Liner Joint Mold (L/J Mold)" is a mold designed for the Amada Long Type, which improves the seams and protrusions at the joint section. The holding power of the product is adjusted by the width and number of joints. By connecting the base and the product with a half-cut joint, we have made the seams and protrusions that occur with micro joints and wire joints less noticeable. 【Features】 ■ Improved seams and protrusions at the joint section ■ Adjusts the holding power of the product by the width and number of joints *For more details, please refer to the PDF document or feel free to contact us.

• Other molds

Typically, the punching process is carried out using long rectangular, long round, or R-shaped long rectangular molds, but small seams (notches) occur at the overlapping parts. The "seamless mold" improves this issue. It minimizes the visibility of the seams (notches). 【Punching shapes with less noticeable seams (in order of visibility)】 ■ Seamless mold ■ Long round ■ R-shaped long rectangle ■ Long rectangle *For more details, please refer to the PDF document or feel free to contact us.

• Other molds

The "Positioning Mold" is a positioning mold (with the same function as a half punch or dowel) that does not create holes (depressions) on the back surface. It streamlines the positioning of components such as melted parts on the backside of the painted surface (appearance surface). A positioning protrusion with an outer diameter of φ4 (approximately 0.3mm in height) is formed on the surface of thin steel plates (thickness 1-1.6mm), and since it does not create holes or depressions on the back surface, there is no need for hole filling or polishing processes before painting. 【Features】 ■ A mold that does not create holes (depressions) on the back surface ■ Streamlines the positioning of components such as melted parts ■ No need for hole filling or polishing processes before painting *For more details, please refer to the PDF document or feel free to contact us.

• Other molds

The "Numbering Stamp Type" is convenient for stamping manufacturing lot numbers. The lot number can be changed quickly without replacement using a rotary mechanism. The stamp uses high-speed steel, which has excellent durability, and the arrangement of the characters is divided into 12 sections, allowing for free selection of content. 【Features】 ■ Convenient for stamping manufacturing lot numbers ■ Lot numbers can be changed quickly using a rotary mechanism ■ Uses high-speed steel for excellent durability ■ Character arrangement is divided into 12 sections with freely selectable content *For more details, please refer to the PDF document or feel free to contact us.

• Press Dies
• Other molds

The "Date Mark Engraving Type" is a convenient engraving mold for marking manufacturing dates. The date can be easily changed by rotating the central arrow with a driver. We offer three sizes for the engraving: φ10, φ16, and φ20. There are three types of date displays: year-month display type, month display type, and year display type. Other engravings can also be accommodated upon request. 【Date Types】 ■ Year-Month Display Type ■ Month Display Type ■ Year Display Type *For more details, please refer to the PDF document or feel free to contact us.

• Press Dies
• Other molds

The die for upward bar forming processing (lower die) is taller than the standard punching die. Therefore, when pressing with the bar forming die attached nearby during the punching process, there may be scratches or distortions on the sheet material. However, the low-height upward bar forming die is only 1mm taller than the standard punching die. As a result, even when installed close to the punching die, it does not cause scratches or distortions on the sheet material, and it does not lead to problems during the movement of the sheet material or turret rotation. 【Features】 ■ Only 1mm taller than the standard punching die ■ Does not cause scratches or distortions on the sheet material even when installed near the punching die ■ Does not cause problems during the movement of the sheet material or turret rotation *For more details, please refer to the PDF document or feel free to contact us.

• Other molds

The "Heavy Beauty Punch (HDP)" is a mold suitable for harsh processing conditions such as continuous punching. With a unique surface treatment method, the peeling of the coating is reduced. The coating is also resistant to peeling due to the heat generated during continuous punching of high-strength steel plates like stainless steel. 【Features】 ■ Suitable for harsh processing conditions such as continuous punching ■ Reduced coating peeling with a unique surface treatment method ■ Coating is difficult to peel even under heat generated during continuous punching ■ Highly rated especially for stainless materials and soft steel plates (T=2.0 or less) *For more details, please refer to the PDF document or feel free to contact us.

• Other molds

The "Conic Long Life Punch (CLP)" demonstrates exceptional durability across a wide range of processed materials, primarily focusing on high corrosion-resistant galvanized steel plates such as SPCC. It can accommodate not only standard round and square shapes but also irregular punching shapes. The cutting edge employs a carefully selected new steel type, making it resistant to chipping and reducing issues related to burr generation due to extended cutting edge lifespan. 【Features】 ■ Significantly increased punching capacity ■ Reduced burr generation issues due to extended cutting edge lifespan ■ Maintains stable processing without troubles ■ Strong resistance to chipping ■ Improved wear resistance *For more details, please refer to the PDF document or feel free to contact us.

• Other molds

The "Conic Hard Punch (CHP)" offers excellent cost performance and is compatible with various processing materials. It reduces the welding phenomenon that tends to occur with aluminum and painted steel plates, allowing for stable processing. Instead of a coating, a modification treatment is applied to the cutting edge surface of the high-speed steel punch, which minimizes the welding phenomenon at the cutting edge and achieves stable processing. 【Features】 ■ Excellent cost performance ■ Compatible with various processing materials ■ Reduces the welding phenomenon that tends to occur with aluminum and painted steel plates ■ Modification treatment applied to the cutting edge surface of the high-speed steel punch ■ Achieves stable processing *For more details, please refer to the PDF document or feel free to contact us.

• Other molds

The "Continuous Hemming Die" is an idea die born from the sheet metal field. While multiple-step hemming is common with press brake bending and punch press dies, this product allows for easy hemming processing. It can process with a single die, pre-forming the edge of the sheet up to 90°, and can further crush it. 【Features】 ■ An idea die born from the sheet metal field ■ Easy hemming processing ■ Can process with a single die ■ Changing the blade edge block is sufficient when changing sheet thickness *For more details, please refer to the PDF document or feel free to contact us.

• Other molds

The "HG Burring Die (Amada Long Type)" has achieved burr-free results during cutting tap processing. With improved sheet metal quality, it allows for differentiation from competitors and can meet the burr-free product demands of home appliance manufacturers and others. The burring pin that determines the inner diameter (upward) and the burring replacement punch (downward) are designed with a conical long-life punch (CLP) specification for extended durability. 【Features】 ■ Achieves burr-free results during cutting tap processing ■ Allows for differentiation from competitors with improved sheet metal quality ■ Can meet the burr-free product demands of home appliance manufacturers and others ■ Designed with a conical long-life punch (CLP) for extended durability ■ Reduces the labor required to remove cutting tap debris *For more details, please refer to the PDF document or feel free to contact us.

• Other molds

This product is a mold that incorporates measures to prevent damage in mold design. It prevents troubles such as punch tip breakage when punching thick plates. The second stage of the cutting edge is designed to be thicker and less prone to breakage, with the effective cutting length kept as short as possible. Additionally, in the case of thick plates, baring processing may be difficult, but it can also be adapted for direct tapping processing on the punched holes of thick plates. 【Features】 ■ The guide has a back escape. ■ It is possible to design a shorter effective cutting edge length for the die to prevent clogging of scrap. ■ Punch material can be selected (high-speed steel/die steel). ■ The second stage of the cutting edge is designed to be thicker and less prone to breakage. ■ The effective cutting length can be designed to be as short as possible. *For more details, please refer to the PDF document or feel free to contact us.

• Other molds

The "Blade Punch & Chip Type Large Diameter Punch" is suitable for molds used for frequently cutting outer shapes. It features a replaceable punch tip, making it eco-friendly. Only the punch chip part needs to be replaced, making it economical. An option for extending the tool life can be added, and usage can also be selected. 【Features】 ■ Suitable for molds used for frequently cutting outer shapes ■ Eco-friendly with a replaceable punch tip ■ Economical as only the punch chip part needs to be replaced ■ Option to add tool life extension measures is also available *For more details, please refer to the PDF document or feel free to contact us.

• Other molds

"Brush Die" solves the problem of workpieces getting caught on the corners or downward-formed shapes in the die hole during workpiece movement. The issue is resolved by having the workpiece move over the brush. It can also be used as a mold to fill empty stations. 【Lineup】 ■ Amada Long Type ■ Murata Type ■ CP Type ■ S Type *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• Other molds

The "Fine Diameter Punch" is a recommended mold for processing with punch tip conditions that are thinner than the plate thickness, such as for the pilot holes in burring. By narrowing the guide clearance and enclosing the tip, it prevents the punch body from wobbling. By eliminating the tip grinding allowance and shortening the tip length as much as possible, we enhance strength and can also produce special specifications. 【Features】 ■ Recommended for processing with punch tip conditions thinner than the plate thickness ■ Prevents wobbling of the punch body ■ In addition to measures to enhance strength, we can also produce special specifications *For more details, please refer to the PDF document or feel free to contact us.

• Other molds

The "Super Fit Guide" is a mold that enables stable processing of materials with protective sheets. By minimizing the gap in the guide holes, stable cutting of the protective sheet is achieved. By narrowing the die clearance by 30% to 40% compared to normal, the cutting force of the protective sheet is improved, which is also effective for processing with uneven loads. 【Features】 ■ Enables stable processing of materials with protective sheets ■ Achieves stable cutting of protective sheets ■ Improves cutting force of protective sheets by narrowing the clearance by 30% to 40% ■ Effective for processing with uneven loads *For more details, please refer to the PDF document or feel free to contact us.

• Other molds

"All Taper II (AT II)" is a die cutting blade suitable for machines equipped with a scrap suction device that forcibly discharges waste material into a scrap box. The cyclone airflow effectively removes waste material. It greatly enhances the slag suction function and allows for measures to prevent waste buildup for large diameters. 【Features】 ■ Forcibly discharges waste material into the scrap box ■ Suitable for machines with a scrap suction device ■ Cyclone airflow effectively removes waste material ■ Greatly enhances the slag suction function ■ Allows for measures to prevent waste buildup for large diameters *For more details, please refer to the PDF document or feel free to contact us.

• Other molds

The "EURO Series" is a press brake die that reduces costs due to its high durability and long lifespan. The cutting edge (forming processing part) is hardened to HRC 54° to 60°. Additionally, in wear experiments on the punch tip, the wear amount was reduced to about 1/4 of that of conventional dies at 12,600 bending cycles. Conic is changing the common sense of dies. Please check our product. 【Features】 ■ Reduces costs due to high durability and long lifespan ■ Cutting edge (forming processing part) hardened to HRC 54° to 60° ■ Punch tip wear experiment data (workpiece: SUS304 t=1.0) ・At 12,600 bending cycles, wear was suppressed to about 1/4 of that of conventional dies ・A tendency was observed where the difference between conventional dies and our product widened with increasing bending cycles *For more details, please refer to the PDF document or feel free to contact us.

• Press Dies

"Protech 3" is a long-type series mold from Amada that can be adjusted to the specified punch height in just a few seconds without any tools. It adopts a spring canister method that ensures the assembly length remains unchanged even after regrinding the punch, making it suitable for high-speed processing modes. Additionally, we can produce "ID molds" that are compatible with turret punch presses that utilize ID-based mold management systems. We will provide the mold with an ID attached, along with an ID information sheet for mold registration. It is also possible to use our punch body with the guides of other manufacturers' ID molds. It particularly demonstrates high functionality with EM, ACUTE, and VIPROS machines. 【Features】 - Completely tool-free, one-touch height adjustment mold - Compatible with high-speed processing - Economical with a punch regrinding allowance of 5mm - Uses oil mist punch (OMP) *For more details, please download the PDF or feel free to contact us.

• Other molds