流体工業 List of Products and Services

When the flow rate display is in operational flow units, the flow unit represents the volumetric flow rate in the operational state, so no correction of the flow rate is necessary. Since a turbine meter is a type of inferred flow meter, the density of the gas does not affect the volumetric flow rate when in operational flow units. 【In the case of operational flow units】 ■ No correction of the flow rate is necessary ■ The density of the gas does not affect the operational flow units *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

Design specifications: liquid density 1000 kg/m3, maximum flow rate 2000 L/h. In actual operation, if the liquid density is 1200 kg/m3 and the indicated flow rate is 1000 L/h, there is no need for flow correction since the flow rate unit is volumetric flow rate L/h. A turbine meter is a type of inferred flow meter, so when using volumetric flow rate units, the density of the liquid does not affect the measurement. However, turbine meters are affected by changes in fluid viscosity, so if there are changes in viscosity, flow measurement errors may occur. When measuring liquid flow with a turbine meter, please ensure that there are no changes in the viscosity of the liquid. *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

In steam flow meters, when the design specification density differs from the actual steam density flowing, flow measurement errors occur, and flow correction is necessary to determine the actual flow rate (equivalent to true flow rate). Here, the indicated flow rate of the differential pressure flow meter refers to the digital indication converted from the analog signal proportional to flow rate output from devices such as differential pressure transmitters, as well as the analog indication. (This principle also applies to area flow meters.) [In the case of steam] ■ Flow correction is necessary to determine the actual flow rate (equivalent to true flow rate). *For more details, please refer to the PDF materials or feel free to contact us.

• Flow Meter

In gas flow meters, if the design specifications for density, temperature, and pressure differ from the actual gas density, temperature, and pressure, an error will occur in the indicated flow rate. To determine the actual flow rate (equivalent to the true flow rate), flow correction is necessary. [For gases] ■ To determine the actual flow rate (equivalent to the true flow rate), flow correction is necessary. *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

In the case of mass flow rate, when the density of the fluid in the design specifications differs from the actual density of the fluid flowing, flow rate correction is necessary for liquid flow meters. Here, the indicated flow rate of the differential pressure flow meter refers to the digital indication that converts the analog signal proportional to flow rate output from devices such as differential pressure transmitters, as well as the analog indication. [For liquids] ■ Flow rate correction is necessary when the design specification density of the fluid differs from the actual density of the fluid flowing. *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

In gas flow meters, if the design specifications for density, temperature, and pressure differ from the actual gas density, temperature, and pressure, there will be errors in the flow rate reading. To determine the actual flow rate (true flow equivalent), flow rate correction is necessary. [In the case of gas] ■ To determine the actual flow rate (true flow equivalent), flow rate correction is necessary. *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

Flow correction refers to the process of determining the actual flow rate (equivalent to the true flow rate) when using a manufactured flow meter under conditions that differ from the fluid specifications at the time of design, either during measurement or when conducting flow measurements. For liquid flow meters, if the density of the fluid specified in the design differs from the density of the fluid actually flowing, flow correction is necessary. In the case of volumetric flow, area flow meters are based on Bernoulli's theorem, so the flow rate is proportional to the square root of the change in fluid density. 【Features】 ■ In the case of volumetric flow - For liquid flow meters, if the density of the fluid specified in the design differs from the density of the fluid actually flowing, flow correction is necessary. - Area flow meters are based on Bernoulli's theorem, so the flow rate is proportional to the square root of the change in fluid density. ■ In the case of mass flow - For liquid flow meters, if the density of the fluid specified in the design differs from the density of the fluid actually flowing, flow correction is necessary. *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

A measuring tube with an upward slope (commonly referred to as a tapered tube) contains a float that can move freely up and down, and is assembled with an appropriate support. This is known as a flow meter. When a fluid (liquid, gas, or vapor) flows from below to above, the float is pushed upward due to the force created by the pressure difference that arises before and after it. As the float moves upward, the flow area between the float and the tapered tube increases. As a result, the velocity of the fluid passing through that area decreases, leading to a reduction in the pressure difference, and the float comes to rest at a position where the forces due to its effective weight and the pressure difference are balanced. Since the flow area determined by the position of the float inside the tapered tube and the flow rate passing through it are in a constant relationship, it is possible to measure the flow rate by detecting that position. 【Density of Gases (Excerpt)】 < Name: Density kg/m3 (ntp) / Specific Gravity > ■ Nitrous Oxide: 1.978 / 1.530 ■ Acetylene: 1.171 / 0.906 ■ Argon: 1.784 / 1.380 ■ Ammonia: 0.772 / 0.597 ■ Carbon Monoxide: 1.250 / 0.967 *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

The "B-MAG M5000" and "Mod MAG M1000" are electromagnetic flow meters that standardly use fluororesin for lining and Hastelloy C for electrodes. 【Features】 <B-MAG M5000> ■ Wide flow range ■ Powered by lithium batteries, no external power supply needed ■ Battery life of up to 10 years, with battery replacement possible ■ Battery level display indicates when replacement is needed ■ Flanged design allows for secure piping <Mod MAG M1000> ■ Achieves low cost despite being a flanged connection type ■ Flow range: 0.03 to 12 m/sec ■ Adopts JIS 10K-RF flange ■ AC power supply, with DC power supply available as an option ■ Complies with ISO standards for excellent compatibility in face-to-face dimensions ★ Additionally, we also offer the "Akashi-type rectifier" which contributes to the reduction of straight pipe length. *For more details, please refer to the documentation. Feel free to contact us with any inquiries.

• Flow Meter

The "Mod MAG M1000" is a general-purpose electromagnetic flow meter that achieves a low price while being a flange connection type. It comes standard with PTFE lining and Hastelloy C electrodes. Additionally, we also offer the "B-MAG M5000," which features excellent cost performance and a replaceable ultra-long-life battery. 【Features】 ■ Wide flow range: 0.03 to 12 m/sec ■ Uses JIS 10K-RF flange ■ AC power supply, as well as DC power supply, can be selected as an option ■ Abundant output options ■ Complies with ISO standards for excellent compatibility between flanges *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

This document is a technical material on flow meters from Fluid Industry Co., Ltd., which manufactures and sells industrial flow meters, industrial instruments, and flow control devices. It includes information on the structure and operating principles of area flow meters, how to determine the operational density of gases, and methods for selecting the diameter of liquid flow meters. [Contents] ■ Area Flow Meters ■ Flow Correction for Area Flow Meters (Liquids) ■ Flow Correction for Area Flow Meters (Gases) ■ Flow Correction for Differential Pressure Flow Meters (for Liquids) ■ Flow Correction for Differential Pressure Flow Meters (for Gases), etc. *For more details, please refer to the PDF document or feel free to contact us.

• others
• Flow Meter

The "LF490/LF620 model (integrated type)" is an electromagnetic flow meter for food applications. Utilizing the features of the electromagnetic flow meter, the connection points with the piping are designed with sanitary fittings to eliminate liquid retention areas, making it suitable for measuring the flow of food. Additionally, we also offer the "LF490/LF622 model (separated type)." 【Features】 ■ Structure suitable for measuring food flow ■ Excellent noise resistance ■ Capable of obtaining stable output even when measuring slurry fluids such as yogurt with fruit pulp ■ Equipped with a 128×128 dot matrix LCD display and infrared switch ■ Parameters can be set without opening the cover (LF620 model, LF622 model) *For more details, please refer to the PDF materials or feel free to contact us.

• Flow Meter
• Transformers

The "FT Series" is a turbine flow meter with a simple structure and easy maintenance. The rotor is made of several magnetic wings, machined as a single unit, and rotates freely. The pick-off is fixed to the main body with screws but does not penetrate the interior of the main body, allowing for non-contact detection of the rotor's rotation, making it suitable for high-pressure use. We also handle the "FTO Series" of Omniflow turbine meters. 【Features】 ■ Good reproducibility ■ High accuracy ■ Wider flow range compared to conventional flow meters ■ Excellent durability *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

The document is the specification and user manual for the "Flow Measurement Rectifier" handled by Fluid Industrial Co., Ltd. By installing it upstream of the flow meter, you can shorten the required straight pipe length on the upstream side. We introduce products such as the "Rectifier Plate SEP Wafer Type," "Rectifier Plate SEG Flange Type," and "Rectifier Short Pipe SET." [Contents] ■ Rectifier Plate SEP Wafer Type ■ Rectifier Plate SEG Flange Type ■ Rectifier Plate SEP User Manual ■ Rectifier Plate SEP SEG Pressure Loss ■ Rectifier Plate SEP SEG Series Model Table, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter
• others

The "RDT Series" is a differential pressure flow meter with an analog current output, compactly set up with a body that includes an orifice plate and a differential pressure transmitter, suitable for steam, gas, and liquid applications. The measurement range allows for a wide range of flow measurement, with a maximum of 1:13 or more. The COM and TEST terminals in the differential pressure transmitter can be used to connect a digital voltmeter (tester) for checking the output signal at zero flow or for zero point adjustment using a drain valve. 【Features】 ■ Compact setup of the body including the orifice plate and the differential pressure transmitter ■ No moving parts, combined with a high-pressure differential pressure transmitter for exceptional reliability and durability ■ The differential pressure transmitter can be selected for either flow proportional current output or differential pressure proportional current output ■ The differential pressure transmitter uses a high-pressure and shock-resistant design, ensuring safety against water hammer ■ The differential pressure transmitter has a protection rating of IP66, making it suitable for outdoor use *For more details, please refer to the PDF materials or feel free to contact us.

• Flow Meter

The "Orifice Flow Meter - Flow Cell Type" is a differential pressure flow meter that measures bypass flow, allowing you to know the total flow rate. By removing the four bolts from the cell block (lower block) and orienting the flow indicator vertically, you can install the base socket in line with the piping direction, enabling flexible installation in both horizontal and vertical piping. Additionally, a strainer is provided on the inflow side of the flow indicator, allowing for regular cleaning. 【Features】 ■ Flexible installation orientation ■ Built-in strainer ■ Regular cleaning possible ■ Compact size ■ The shape and size of the flow indicator are common, even if the piping sizes differ *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

The "RDM-300 Series" is a receiving instrument that digitally displays instantaneous flow and cumulative flow based on the output signals from various flow meters. It can output analog signals, cumulative pulse signals, and alarm signals, making it versatile for various applications. Our company provides high-precision and durable in-house manufactured flow meters based on the technology and knowledge we have cultivated over many years. 【Features】 ■ Digital display based on output signals from various flow meters ■ Analog input and pulse input ■ Versatile for multiple uses ■ Compliant with RoHS directives *For more details, please refer to the PDF materials or feel free to contact us.

• Other inspection equipment and devices
• Flow Meter

The "GTV Series" is designed to be mounted directly and vertically on piping, measuring the instantaneous flow of liquids and gases within the piping. The flange material is made of rigid polyvinyl chloride (PVC-U), making it suitable for measuring the flow of corrosive liquids and gases. The flow scale on the surface of the glass tapered tube is engraved in a concave shape and treated with a reddish color, enhancing visibility. Additionally, we also offer the acrylic tapered tube flow meter "ATV Series." 【Features】 ■ Ideal for measuring the flow of corrosive liquids and gases ■ Flange material made of rigid polyvinyl chloride (PVC-U) ■ High visibility flow scale on the surface of the glass tapered tube ■ Acrylic tapered tube flow meter "ATV Series" also available *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• Flow Meter

This catalog features a wide range of "flow meters" handled by Fluid Industry. We introduce various products, including "area flow meters," "differential pressure flow meters," and "turbine meters." Based on the technology and knowledge we have cultivated over many years, we offer our own flow meters that excel in accuracy and durability. [Contents (excerpt)] ■ Area Flow Meter 1 ■ Area Flow Meter 2 ■ Panel Type Flow Meter ■ Orifice Meter ■ Flapper Flow Meter *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• Flow Meter

The "PGH" is a compact and low-cost flow meter that uses a glass tapered tube suitable for measuring small flow rates of liquids and gases. It is suitable for use in testing and measurement research purposes when mounted on small devices. By installing a differential pressure valve on this product, it maintains a constant flow rate against pressure changes at the inlet and outlet due to the function of the diaphragm, even with fluctuations in fluid pressure. 【Features】 ■ Experimental flow meter using a glass tapered tube ■ Ideal for measuring small flow rates of liquids and gases ■ Compact and low-cost ■ Maintains a constant flow rate (when equipped with a differential pressure valve) *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• Flow Meter

This catalog introduces a variety of flow meters handled by Fluid Industry. Starting with the transmitter "9900," which can be used as an integrated or separated type, we have a range of products including the flow totalizer "8150." Additionally, we provide information on product combinations, materials, specifications, and more. 【Featured Products】 ■ Transmitter "9900" ■ Flow Totalizer "8150" ■ Paddle Sensor "MK515" ■ Low Flow Sensor "2536" ■ Metalex Sensor "MK525" *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• Flow Meter

The "ORT" is installed between pipe flanges to create a differential pressure based on the flow rate of liquids, gases, and steam, which is then measured using a differential pressure gauge or transmitter. The design and construction of the pipe flanges are carried out by the customer, while the orifice plate is designed and manufactured by our company based on orifice calculations in accordance with JIS standards. Additionally, we offer orifice flanges in various forms, including the flange-integrated type "ORS" and the flange wafer type "ORW." 【Features】 ■ Installed between pipe flanges ■ Generates differential pressure based on the flow rate of liquids, gases, and steam for measurement ■ Designed and manufactured by our company based on orifice calculations in accordance with JIS standards ■ Orifice flanges are also available *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments

The "OR Series" is a differential pressure plus area flow meter that can be designed compactly around piping. Even for large diameter piping, the flow indication unit is of a common size, allowing for cost-effective flow measurement even in large diameters. The main pipe section is available in three types: flange wafer type, wafer type, and flange short pipe type. You can select according to your piping construction needs. 【Features】 ■ Compact design around piping ■ Common size for flow indication unit ■ Cost-effective flow measurement even for large diameters ■ Available in flange wafer type, wafer type, and flange short pipe type ■ Selectable according to piping construction *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• Flow Meter

The "MP Series" is designed to leverage the robust and safe features of all-metal area flow meters, allowing for the measurement of very small flow rates. It offers instantaneous flow indication, instantaneous flow analog current output, alarm relay contact output, and a wealth of additional features suitable for various applications in plant equipment. It is compatible with liquids and gases such as industrial water, industrial chemicals, reagent solutions, and various gases, making it suitable for flow measurement across a wide range of industries. Additionally, the metal tapered tube area flow meter "MM Series" is also part of the lineup. 【Features】 ■ Safe design replacing glass tubes ■ Capable of measuring very small flow rates ■ A wealth of additional features applicable to various uses ■ Compatible with liquids and gases such as industrial water and industrial chemicals ■ Well-suited for flow measurement in various industries *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• Flow Meter

Fluid Industrial Co., Ltd. handles the electromagnetic flow meters 'LF410/LF620/LF622'. The detector model "LF410" uses ceramics in the measuring tube, which provides excellent wear resistance, heat resistance, and negative pressure resistance. Furthermore, it adopts a function magnetic field distribution method, which minimizes the effects of flow distortion. In addition, by combining it with the multifunctional converter LF620 (integrated type) and LF622 (separated type), which are equipped with a unique noise removal circuit and computational processing function, it offers excellent noise resistance and stable output even when measuring slurry fluids such as pulp liquid and cement milk. 【Features (LF410)】 ■ Uses ceramics in the measuring tube ■ Excellent wear resistance, heat resistance, and negative pressure resistance ■ Adopts a function magnetic field distribution method ■ Minimal effects of flow distortion *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• Flow Meter

The "GTF Series" is a simple and easy-to-use area flow meter that allows for direct reading of measurements on-site. It is installed directly and vertically onto the piping, measuring the instantaneous flow of liquids and gases currently flowing through the pipe. The flow scale on the surface of the glass tapered tube has markings with red coloring, providing excellent visibility. Additionally, we also offer the acrylic tapered tube area flow meter "ATF Series." 【Features】 ■ Simple and easy to use ■ Direct reading of fixed values on-site ■ Flow scale with markings and red coloring ■ Excellent visibility ■ Acrylic tapered tube area flow meter also available *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• Flow Meter

Fluid Industry Co., Ltd. offers the panel-type experimental flow meter 'GP Series'. We have a wide lineup including the simple flow meter "GPA," which allows for direct reading of instantaneous flow rates of liquids and gases on a flow scale, as well as "GPB," which uses a glass tapered tube. Additionally, we also provide a low-cost flow meter "PGH Series." 【Features (GPA)】 ■ Flow meter using a glass tapered tube ■ Allows for direct reading of instantaneous flow rates of liquids and gases on a flow scale ■ The back of the tapered tube is equipped with a mirror plate ■ Structure enables accurate flow measurement *For more details, please refer to the PDF materials or feel free to contact us.

• Other inspection equipment and devices
• Flow Meter

The "FVG Series" is a self-operated constant flow valve that operates based on the pressure difference between primary and secondary pressures. No external inputs such as power supply or air pressure are required at all. It easily controls a constant flow even with pressure changes. Additionally, we offer other products such as the variable flow type constant flow valve "NFVT Series" for small flow rates and the all-metal flow meter equipped constant flow valve "MP-NFVT Series." 【Features】 ■ No need for power supply, air pressure, or pressure gauges ■ Free to change the set flow rate ■ Can be manufactured for gases ■ Accurate precision (within ±2% F.S.) ■ Quick response speed *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• valve

The "FMK Series" is a flapper-type flow meter equipped with an instantaneous flow rate indicator. It provides clear indication even for opaque fluids. With a highly rigid body, it offers exceptional reliability and is easy to handle and maintain. Additionally, we offer other models such as the low flow type "FMM Series" and the sight glass type flow monitoring meter "FFK Series." 【Features】 ■ Equipped with an instantaneous flow rate indicator ■ Clear indication for opaque fluids ■ Exceptional reliability with a highly rigid body ■ Easy to handle and maintain ■ No power supply required for instantaneous flow indication *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• Flow Meter

At Fluid Industrial Co., Ltd., we handle the metal tapered pipe area flow meter "EF Series." We also offer the easy-to-maintain direct-reading area flow meter "EFF Series" and the liquid-specific area flow meter "EKF Series." The "EFF Series" is suitable for flow management and measurement in various industries such as steel, chemicals, pharmaceuticals, water supply, and water purification. 【EFF Series Features】 ■ Uses a metal tapered pipe with a glass tube for the indication part ■ Simple structure for easy maintenance ■ Compatible with flow measurement of various liquids and gases such as industrial water, potable water, and AIR ■ Various materials can be selected according to corrosion resistance ■ Excellent durability ■ Well-suited for flow management and measurement in various industries *For more details, please refer to the PDF materials or feel free to contact us.

• Other inspection equipment and devices
• Flow Meter

Our company offers a wide range of ultrasonic flow meter series manufactured by Dynasonics (USA). We have a lineup that includes the compact and lightweight ultrasonic transit flow meter "TFX Series" and the ultrasonic Doppler flow meter "DFX Series." Fluid Industries confidently selects and delivers overseas measuring instruments. 【Features (TFX Series)】 ■ Easy installation from the outside of the pipe ■ No moving parts and does not come into contact with the liquid, eliminating damage ■ Small and lightweight indicator (transmitter) with keypad ■ Power supply options available (AC or DC) ■ Standard output equipped with 4-20mA DC and two pulse outputs *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• Flow Meter

The "ATL Series" is a simple and easy-to-use acrylic tapered tube flow meter that allows for direct reading of measurements on-site. It is installed directly and vertically onto the piping, measuring the instantaneous flow rate of liquids and gases currently flowing through the pipe. The tapered tube section is made of transparent acrylic, making it suitable for measuring the flow rates of various liquids such as industrial water, tap water, and pure water systems, as well as gases like air and nitrogen. 【Features】 ■ Direct reading of measurements on-site ■ Simple and easy to use ■ Vertical installation ■ Ideal for measuring the flow rates of various gases *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• Flow Meter

The "452A" is a low-cost flow display device that connects to various flow meters to provide instantaneous flow readings. It offers 4-point alarm output, with relay contact output (a contact) or open collector output available. The instantaneous flow is displayed digitally with a 5-digit display up to 99999. It uses LEDs with two-color illumination (red and green), allowing color selection during operation. 【Features】 ■ Instantaneous flow digital 5-digit display ■ Compact size (panel 96mm x 48mm) ■ Front panel with IP65 level waterproof structure ■ Two-color illumination (red and green) ■ Built-in power supply for 2-wire transmitter sensors ■ CE marking compliant *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• Flow Meter

The "451A" is a low-cost flow indicator that connects to various flow meters to display instantaneous flow rates. The panel has a compact size of 96mm x 48mm and includes a built-in power supply for 2-wire transmitters. The instantaneous flow is displayed digitally with a 5-digit display up to 99999. It uses red and green LED lights, allowing for color selection during operation. 【Features】 ■ Compact size (panel 96mm x 48mm) ■ Front panel with IP65 level waterproof structure ■ Instantaneous flow digital 5-digit display ■ Red and green dual-color illumination ■ Built-in power supply for 2-wire transmitters *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• Flow Meter

The "419 Series" is a feature-rich digital flow indicator and integrator with dual display, suitable for various flow management and flow control applications. It has a compact size of 48mm x 48mm for the panel. The front panel is designed with an IP65 level waterproof structure, making it reliable for use in water treatment systems. The instantaneous flow analog output resolution is 1/2000 (equivalent to 11 bits), ensuring high resolution, and both analog input models and pulse input models are available. 【Features】 ■ Compact size (panel 48mm x 48mm) ■ Front panel with IP65 level waterproof structure ■ Ensures high resolution of 1/2000 (equivalent to 11 bits) ■ Can be combined with various flow meters ■ Suitable for various flow management and flow control applications *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• Flow Meter

Fluid Industrial Co., Ltd. has been manufacturing and selling various flow meters, starting with area flow meters, since its establishment in March 1953 (Showa 28). During this time, we have responded to our customers' trust by maintaining and improving our technology and quality standards to supply flow measurement instruments that meet their quality specifications, contributing to society through our products. Additionally, we recognize that the preservation of the global environment is one of humanity's common important issues. To prevent environmental pollution and reduce environmental impact, we have established an environmental policy and are committed to reducing carbon dioxide emissions and other efforts across the entire organization on a daily basis. 【Business Activities】 ■ Manufacturing and sales of industrial flow meters and flow control devices *For more details, please refer to the PDF materials or feel free to contact us.

• Other inspection equipment and devices
• Flow Meter

A flow meter is a device that contains a float that can move freely within a measuring tube (usually a tapered tube) with an upward slope, assembled with appropriate supports. In addition to its compact and slim design, it features a safety design that excels in earthquake and fire resistance. 【Features】 ■ Compact and slim design with multifunctional capabilities ■ All-metal construction with excellent earthquake and fire resistance ■ Maintenance-free due to its simple structure ■ Flow indication does not require power supply and is easy to install *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter
• Other inspection equipment and devices

The "ESA ESB Series" is an industry standard model of metal type sanitary flow meters, featuring an integrated rectifier that stabilizes the flow inside the flow meter, resulting in steady flow and improved indication functionality. This model uses a magnetic tracking structure for the flow indication mechanism, making it suitable for measuring the flow of opaque liquids such as milk, juice, soy sauce, and coffee. Additionally, we offer a wide range of other series. [Featured Products] ■ All-metal sanitary flow meter ESA ESB Series ■ All-metal sanitary flow meter MSE MSA MSB Series ■ Glass tapered tube sanitary flow meter GTM Series *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter
• Other inspection equipment and devices
• others

The "GTL series" is a simple and easy-to-use area flow meter that is directly and vertically mounted on piping to instantly measure the flow rate of liquids and gases within the pipe, allowing for direct reading of the measurement on-site. The flow scale on the surface of the glass tapered tube has markings with red coloring, providing good visibility. *For more details, please refer to the PDF document or feel free to contact us.*

• Other measurement, recording and measuring instruments
• Other inspection equipment and devices

"SEP" is a non-uniform porous plate rectifier device. By installing this product on the upstream piping of a flow meter, the required straight pipe length on the upstream side can be shortened. When affected by unsteady flow (such as biased flow or swirling flow) upstream of differential pressure flow meters, paddle flow meters, turbine meters, ultrasonic flow meters, electromagnetic flow meters, and vortex flow meters, it can adversely affect their original performance and reduce the accuracy of inferred flow meters, thereby improving accuracy. *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "μ-ICC 2.45" is a microwave concentration meter for inline concentration control that allows continuous measurement without the need for bypass piping or similar setups. It is less affected by dirt and the color of the measured substance, and since it has no moving parts or consumables, it is highly reliable and easy to maintain. 【Features】 ■ Less affected by dirt and the color of the measured substance ■ High reliability and easy maintenance due to the absence of moving parts and consumables ■ Allows continuous measurement without the need for bypass piping or similar setups *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other electronic measuring instruments

"FlowJam" is a powder flow detector. This product can be easily installed with a screw-in type. It is also adopted in various countries such as Germany and Australia. Additionally, we offer optional items such as adapters for high temperature and high pressure. *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• High frequency/microwave parts

"DynaGuard" is a powder and bulk material transport detection device that continuously monitors the flow of powder and bulk materials within pipes. In the event of a blockage or other issues, it alerts users to abnormalities through contact output. This product can be used in all transport processes, such as transport pipes and silo outlets. Additionally, it can be installed without significant modifications to the flange areas of pipes. 【Features】 ■ Capable of wide-range measurement (g/h to t/h) ■ Usable in all transport processes, such as transport pipes and silo outlets ■ Can be installed without significant modifications to the flange areas of pipes ■ Usable for all types of powders and bulk materials *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• Other conveying machines
• Other security and surveillance systems

"Solid Flow" is a microwave-based powder flow meter that excels in wear resistance and allows for easy sensor installation. This product is developed for measuring powder flow in metal piping and can measure particulate matter such as dust and powders with particle sizes ranging from 1nm to 1cm. The sensor utilizes microwave technology within metallic piping. The microwaves emitted within the metal piping are reflected by solid particles and received by the sensor. 【Features】 ■ Excellent wear resistance ■ Easy sensor installation ■ Capable of measuring particle sizes from 1nm to 1cm ■ Uses microwave technology within metallic piping *For more details, please request documentation or view the PDF data available for download.

• Other measurement, recording and measuring instruments

The "ORT" is a flange-type orifice plate that is installed between pipe flanges to create a differential pressure based on the flow rate of liquids, gases, and steam, allowing for flow measurement using differential pressure gauges and transmitters. The design and construction of the pipe flanges are carried out by the customer, while the orifice plate is designed and manufactured by our company based on orifice calculations in accordance with JIS standards. Additionally, differential pressure gauges and transmitters are available as options. *For more details, please refer to the PDF materials or feel free to contact us.*

• Other measurement, recording and measuring instruments