イズミフードマシナリ List of Products and Services

This machine is an ice cream freezer equipped with advanced automatic driving mechanisms, allowing for stable automatic production with a one-touch operation. From high-fat ice cream to sorbet, products with a smooth texture can be produced with simple input via a touch panel. Additionally, it is equipped with an automatic control system for mix flow rate, hardness, overrun, and cylinder internal pressure, displaying current values in a bar graph. 【Features】 ■ CIP-compatible mix pump and discharge pump ■ Selectable pump rotor materials ■ Reduction in the number of V-belts ■ Slimming of the main body ■ HACCP compliant, etc. *For more details, please download the PDF or feel free to contact us.

• Other manufacturing equipment

The "PW Series" is a heat exchanger for CIP systems that replaces the tubes of shell and tube heat exchangers with plates. It achieves high pressure and high temperature resistance. The fully welded plate structure is designed without gaskets, eliminating concerns about leaks, and it can handle high-temperature steam and liquids such as oil, where gasket degradation is severe. 【Features】 ■ Gasketless structure ■ High performance ■ Compact ■ Low cost *For more details, please download the PDF or feel free to contact us.

• Plate Heat Exchanger

The "High Emulsifier" is an emulsifying machine that combines emulsification and pumping capabilities through a rotor and stator equipped with uniquely shaped shear teeth. It possesses high emulsification performance, achieving particle diameters of a few microns in O/W emulsions. Operating at peripheral speeds of 30 to 50 m/s, it applies strong shear forces while allowing the liquid to pass through, efficiently emulsifying the processing liquid, making it a high-efficiency sanitary emulsifier. 【Features】 ■ No need for a liquid delivery pump or discharge pump ■ Directly connected to the motor, requiring no special bearings and is very compact ■ Clamp mounting method allows for easy maintenance without special tools ■ Uses an inside stationary type double mechanical seal for shaft sealing ■ Contact parts are available in SUS304 and SUS316 *For more details, please download the PDF or feel free to contact us.

• Emulsifying and dispersing machine

Our company offers a series of tube-type heat exchangers, the 'NTR type (single pass type)', which prevents contamination by eliminating gaps between the shell-side tube sheet and tubes, allowing products to flow on the shell side. By adopting small-diameter tubes, the flow velocity inside the tubes increases, achieving a high heat transfer coefficient. Furthermore, by using corrugated tubes, the heat transfer coefficient is improved. 【Features】 - Energy-saving: Reduces utility usage by performing liquid-liquid heat recovery. - Disassembly structure: Allows visual inspection of the outer surface of the tubes. - Space-saving: Conducts heat exchange without hot water, reducing installation space. - Floating tube sheet: Can absorb differences in thermal expansion without expansion bends. *For more details, please download the PDF or feel free to contact us.

• Other Heat Exchangers

The "Damanizer" is a continuous powder suction dissolution device that achieves unique dissolution through powder suction, degassing, and mixing under negative pressure. By generating a vacuum with an internal impeller, it absorbs the powder and instantaneously disperses and mixes it into a liquid within the casing. It is capable of dissolving high-viscosity powders by forcibly sucking and mixing the powder. 【Features】 ■ Almost no clumping occurs ■ Powerful liquid delivery capability ■ Powder supply methods can be selected ■ Maintenance, inspection, and disassembly cleaning are easy *For more details, please download the PDF or feel free to contact us.

• Other emulsification and dispersion equipment

The "Slash Heater Cooler" is a heat exchanger capable of heating and cooling substances with a viscosity of 200,000 CP and solid particles up to 20mm in size, handling almost anything that can be pumped. It allows for a variety of processing treatments such as heating sterilization, cooling, freezing, blending, and crystallization of high-viscosity liquid foods. The structure of the dasher and the heat transfer medium can be selected according to the application. Additionally, depending on the properties of the processing liquid, a double-jacket design that circulates refrigerant within the rotating rotor enables more effective heat exchange. 【Features】 ■ Suitable for processing liquids with solids and high viscosity ■ High heat transfer coefficient ■ High sanitary structure ■ Usable for multiple applications *For more details, please download the PDF or feel free to contact us.

• Other Heat Exchangers

The "VMIX Mixing Tank" is a mixing tank suitable for production with varying batch sizes (variable production) and for small-lot, diverse product manufacturing. It can achieve uniform mixing within a liquid volume range of 20% to 120%. It can mix fluids with viscosities from 1 mPa·s to several tens of thousands of mPa·s, accommodating viscosity changes during the manufacturing process. Additionally, compared to paddle and turbine blades, it can maintain a lower optimal rotation speed across various viscosity ranges, resulting in a design that minimizes air entrapment. 【Features】 ■ Uniform mixing even with varying batch sizes ■ Capable of mixing across a wide range of viscosity ■ Short mixing time ■ Minimal air entrapment *For more details, please download the PDF or feel free to contact us.

• Mixer
• Other Mixers

The "SLUSH MIXER" is a continuous mixing and stirring device that eliminates time loss and excess stirring power generated during batch processing, allowing for uniform mixing of high-viscosity fluids in a short time. With an inner blade-equipped dasher that has a high stirring effect, rapid mixing and emulsification processing is possible. Additionally, by combining it with our emulsifier, a more stable emulsified state can be achieved. 【Features】 ■ High-efficiency heat exchange possible during mixing and emulsification ■ CIP cleaning and SIP sterilization are possible ■ Continuous processing allows for easy and accurate determination of daily production volume *For more details, please download the PDF or feel free to contact us.

• Mixer
• Dispersion/emulsification equipment/homogenizer
• Mixer/Stirrer

The "NT Plate Series" adopts a different waveform on the heat transfer surface for the left and right sides (Opti Wave = optimal wave) to change the pressure loss in the left and right flow paths, thereby equalizing the liquid flow rate across the entire width of the heat transfer surface. This results in extended operating time and reduced cleaning time for the heat exchanger. The average gap between the plates is reduced, increasing the liquid flow rate. This improves product yield and allows for higher thermal efficiency compared to conventional models. Additionally, the reduction of scale adhesion and scorching near the corners enables extended operating time. 【Features】 ■ Adoption of Opti Wave(R) achieves uniform liquid flow rate across the entire width of the heat transfer surface - Enables extended continuous operating time - Improves cleanability - Enhances product yield *For more details, please download the PDF or feel free to contact us.

• Plate Heat Exchanger

The "IMSS Type V-Line 3S" is an ice stick manufacturing machine that has improved its mechanical capability by 56% compared to conventional models, enabling production of 12,000 to 54,000 pieces per hour. The drive has been changed from air cylinders to servo motors, allowing for free adjustments of fixed position stops and speed control. Additionally, it features shockless operation with multi-stage speed, multi-stage position, and acceleration/deceleration control, achieving energy savings and reduction of waste. 【Features】 - Capable of producing a variety of products with high capacity - High precision, quiet, and smooth operation - Reduced running costs - Control through digital management *For more details, please download the PDF or feel free to contact us.

• Other manufacturing equipment

This product is a high-temperature, high-pressure multifunctional extraction device that achieves a design pressure of 0.4 MPa and a design temperature of 145°C. It is capable of various extraction methods, including drip extraction, immersion extraction, and semi-immersion extraction. In recent years, the cost of raw materials such as coffee beans for beverages has skyrocketed. To address this, we have realized even higher temperature and pressure specifications to improve extraction efficiency and contribute to reducing our customers' raw material costs. 【Features】 ■ Mechanism that enables extraction at a maximum of 0.4 MPa and 145°C (patented by our company) ■ Stirring shaft sealing mechanism - Shaft sealing using a combination of thrust seal and double mechanical seal, capable of operation at 0.4 MPa × 145°C ■ Lower lid tightening mechanism - Locking device using a combination of high-torque motor and swing cylinder, capable of operation at 0.4 MPa × 145°C *For more details, please refer to the PDF document or feel free to contact us.

• Refining and Extraction Equipment

Our company offers a variety of stainless steel "sanitary tanks" standardized for liquid processing of various liquid foods, pharmaceuticals, and chemicals, tailored to meet the manufacturing process requirements of our customers. We provide reliable sanitary and cleaning performance that matches the applications for liquid processing, from various foods to pharmaceuticals. Leveraging our extensive experience, we select and design tanks suitable for the processing liquids and their processes based on standards backed by performance and proven results, ranging from standalone tanks to plant engineering. 【Features】 ■ High reliability in sanitary and cleaning performance ■ Strong rigidity ■ High mixing efficiency and gentle agitation ■ Capable of handling everything from standalone tanks to plant engineering ■ A new product series featuring new technologies *For more details, please refer to the PDF materials or feel free to contact us.

• tank
• Other mixing machines and tanks
• Other Tanks

Sumitomo Heavy Industries and Izumi Food Machinery have jointly developed a new product, the sanitary type "Max Blend Mixing Tank," suitable for advanced fields such as pharmaceuticals, food, and biotechnology. The sanitary type has been established as a standard for milk and dairy products and now meets the requirements of international standards, such as the 3A sanitary standards and IDF standards, which are widely applied to general food products. It is also possible to attach a CIP (Clean-In-Place) system and can accommodate aseptic specifications. 【Features】 ■ Compatible with a wide range of viscosities ■ Stable liquid level changes ■ Short complete mixing time ■ Low power consumption ■ Gentle stirring *For more details, please refer to the PDF document or feel free to contact us.

• Other Mixers
• Mixer

Our multifunctional extraction device is a packaged system that includes auxiliary equipment, based on a multifunctional extractor capable of a wide range of extraction methods, from raw material supply to residue discharge. With just one unit, it is possible to perform various extraction methods from "coffee" to "dashi." Please feel free to contact us if you have any inquiries. 【Features】 ■ Various extraction operations allow for a wide range of recipe settings ■ High-concentration extraction (low water addition ratio) and improved solid recovery rates are possible ■ Clear extraction liquid can be obtained ■ Air pressure function enables reduction of moisture in the extraction residue ■ Extraction and residue separation in a sealed system are possible *For more details, please download the PDF or contact us.

• Refining and Extraction Equipment