VASUジャパン List of Products and Services

This is a biodegradable plastic compounded with PBAT and based on calcium carbonate. It can mainly be used for inflation molding. You can use your existing molding equipment as is, so no new capital investment is required. With proper disposal after use, it is harmless and biodegradable. It can contribute to decarbonization by replacing existing petroleum-based plastics. Sample materials for testing are available from 25 kg. We offer a lineup that complies with biodegradable certifications such as DIN, ASTM, and ISO. Customization is also possible according to your needs.

• plastic

This is a biodegradable plastic compounded with PLA and other materials based on PBAT. It can mainly be used for inflation molding. You can use your existing molding equipment as is, so no new capital investment is required. With proper post-use disposal, it is harmless and biodegradable. It can contribute to decarbonization by replacing existing petroleum-based plastics. Sample for testing is available from 25 kg. We have a lineup that complies with biodegradable certifications such as DIN, ASTM, and ISO. Customization is also possible according to your needs.

• plastic

This is a biodegradable plastic compounded with materials such as PBAT based on PLA. It can mainly be used for injection molding. You can use your existing molding equipment as is, so no new capital investment is required. With proper post-use disposal, it is harmless and biodegradable. It can contribute to decarbonization by replacing existing petroleum-based plastics. Sample materials for testing are available starting from 25kg. We offer a lineup that complies with biodegradable certifications such as DIN, ASTM, and ISO. Customization is also possible according to your needs.

• plastic

This is a biomass plastic sheet compounded with starch and based on PP. It can mainly be used for vacuum forming and can utilize existing molding equipment without the need for new capital investment. Achieving a biomass content of up to 60%, it contributes to decarbonization by replacing existing petroleum-based plastics. Sample materials for testing are available. There are grades that have obtained the biomass mark from JORA (Japan Organic Resources Association). There are also grades compliant with the Ministry of Health, Labour and Welfare's No. 370 test. Customization is possible according to your requirements.

• plastic

This is a biomass plastic compounded with starch and based on PA. It can mainly be used for injection molding. You can use your existing molding equipment as is, so no new capital investment is required. Coloring is also possible. It achieves a biomass content of up to 30%. By replacing existing petroleum-based plastics, it contributes to decarbonization. We provide trial samples starting from 25 kg. Customization is also possible according to your needs.

• plastic

This is a biomass plastic compounded with starch based on PE. It can mainly be used for inflation molding. You can use your existing molding equipment as is, so no new capital investment is required. Coloring is also possible. It achieves a biomass content of up to 20%. It can contribute to decarbonization by replacing existing petroleum-derived plastics. We provide sample materials for testing starting from 25 kg. Customization is also possible according to your needs.

• plastic

This is a biomass plastic compounded with shell powder based on PC. It can mainly be used for injection molding. You can use your existing molding equipment as is, so no new capital investment is required. Coloring is also possible. It achieves a biomass content of up to 16%. It can contribute to decarbonization by replacing existing petroleum-based plastics. We provide trial samples starting from 25 kg. Customization is also possible according to your needs.

• plastic

This is a biomass plastic compounded with shell powder and PLA based on ABS. It can mainly be used for injection molding. You can use your existing molding equipment as is, so no new capital investment is required. Coloring is also possible. It achieves a biomass content of up to 30%. By replacing existing petroleum-based plastics, it contributes to decarbonization. Sample materials for testing are available starting from 25 kg. There are grades that have obtained the biomass mark from JORA (Japan Organic Resources Association). There are also grades that comply with the Ministry of Health, Labour and Welfare's No. 370 test. Customization is possible according to your needs.

• plastic

This is a biomass plastic compounded with shell powder and PLA, based on HIPS. It can mainly be used for injection molding. You can use your existing molding equipment as is, so no new capital investment is required. Coloring is also possible. It achieves a biomass content of up to 30%. By replacing existing petroleum-derived plastics, it contributes to decarbonization. Sample materials for testing are available starting from 25 kg. There are grades that have obtained the biomass mark from JORA (Japan Organic Resources Association). There are also grades that comply with the Ministry of Health, Labour and Welfare's No. 370 test. Customization is possible according to your requests.

• plastic

This is a biomass plastic compounded with starch and based on PP. It can be used for injection molding, extrusion molding, and blow molding. You can use your existing molding equipment as is, so no new capital investment is required. Coloring is also possible. It achieves a biomass content of up to 60%. By replacing existing petroleum-based plastics, it contributes to decarbonization. Sample materials for testing are available starting from 25 kg. There are grades that have obtained the biomass mark from JORA (Japan Organic Resources Association). There are also grades that comply with the Ministry of Health, Labour and Welfare's No. 370 test. Customization is possible according to your needs.

• plastic

This is a compound pellet material primarily made from PLA, suitable for use mainly in injection molding. It is composed of a fully biodegradable formulation after use. Additionally, it has a biomass content exceeding 60%, contributing to carbon neutrality and reducing CO2 emissions. It is also possible to obtain a biomass mark (procedures are required for labeling). Expected applications include: Toothbrushes, apparel accessories (such as buttons), small speaker housings, sheets for vacuum forming (for food trays). Sample requests: We are currently providing samples starting from 25 kg for test molding. We also offer physical property information and reference data for test molding. For companies considering some form of environmental protection measures but struggling to take concrete steps, we recommend starting with test molding using existing molds. This allows for testing with small samples, minimizing significant cost burdens while enabling concrete actions.

• plastic
• Organic Natural Materials
• Engineering Plastics

This is a compound pellet material primarily made from starch, suitable for use mainly in injection molding. It has a biomass content of over 80%, contributing to carbon neutrality and reducing CO2 emissions. It is also possible to obtain a biomass mark (procedures are required for labeling). Additionally, after use, it is composed of approximately 70% biodegradable materials. The composition is primarily based on starch and does not contain polylactic acid, allowing for stable pricing and delivery even when the market price of polylactic acid rises. Expected applications include: Toothbrushes, apparel accessories (such as buttons), small speaker housings, and sheets for vacuum forming (for food trays). Sample requests: We are currently providing samples starting from 25 kg for test molding. We also offer physical property information and reference data for test molding. For companies considering some form of environmental protection measures but struggling to take concrete steps, we recommend starting with test molding using existing molds. This allows for testing with small samples, minimizing costs while enabling specific actions to be taken.

• plastic
• Organic Natural Materials
• Engineering Plastics

This is a compound pellet and sheet material made primarily from PLA and starch, suitable for various molding applications. The VS series includes a variety of options, such as those composed of biodegradable materials after use and those with a high biomass content. They align with the concept of carbon neutrality and contribute to reducing CO2 emissions. It is also possible to obtain a biomass mark (procedures are required for display). Expected use cases: Toothbrushes, apparel accessories (such as buttons), small speaker enclosures, sheets for vacuum forming (for food trays). Sample requests: We are currently providing samples starting from 25 kg for test molding. We also offer physical property information and reference data for test molding. If your company is considering some form of environmental protection measures but has not yet taken concrete steps, we recommend starting with test molding using existing molds. You can try with small samples, which will not incur significant costs and allow you to take specific actions.

• Composite Materials